Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “research methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Non-Abelian quasiparticles and topological superconductivity for the quantum information science

The research performed on this proposal lead to significant progress in understanding spectra of charge carrier holes in spin 3/2 valence bands in two-dimensional systems and topological phenomena in these systems; resulted in enhanced knowledge of topological excitations, such as Majorana fermions and parafermions in electron and hole systems; lead to new breakthroughs in understanding quantum Hall systems, which is an important breeding ground for topological excitations; contributed to understanding of several aspects of theory of spin-orbit interactions; and understanding of hybrid superconductor/semiconductor structures. Methods and techniques used or developed in the research were effective in achieving its results. Some of the developed methods have been used by the research community. The achieved results are beneficial for both theorists and experimentalists in condensed matter and related areas of research, developed knowledge is important for progress in quantum science and technology, and therefore is of benefit to the public.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1993

Calculation methods for rotor wake formation in forward flight

The primary focus of this research centered on improving the vorticity-capturing properties of Eulerian flow solvers in convection-dominated flows. The work was motivated by the fact that excessive numerical diffusion observed in current Euler solvers on grids of feasible size is a major obstacle to accurately computing the flow about helicopter rotors, especially in the forward flight case. The work was originally supported by NASA Grant NAG2-421 for two years. The research then continued for four more years under an ONR contract. The research goal of reduction of numerical diffusion in Euler solvers remained the same, although the target application was now the prediction of internal vortical secondary flows. This was part of a larger ONR-sponsored research program at MIT aimed at reducing the noise of turbopumps. The research work culminated in the PhD thesis titled 'A Coupled Eulerian/Lagrangian Method for the Solution of Three-Dimensional Vortical Flows'.

Drela, Mark↗
NASA NTRS1993

Apparatus and method for improving spin recovery on aircraft

Previous research on airplane spinning and recovery has shown that at potential spin conditions (high angles of attack with rotation) the horizontal tail, depending upon its location, can create a wake about the vertical tail and rudder which can adversely affect airplane spin and recovery characteristics. Many methods of altering the tail geometry to modify these interference effects were investigated for improving airplane spin and recovery characteristics. Examples of changes includes relocation of the horizontal tail, increasing control surface travel, and use of a 'flip tail' that can be rotated to extreme angles for spin recovery. A device is provided which improves the spin recovery characteristics of aircraft which involves attaching the horizontal tail of the aircraft to the aircraft such that a gap remains between the root end of each horizontal tail section and the fuselage or vertical tail of the aircraft. The gaps measure between about 15 and 30 percent of the tail semispan. The gaps may be covered by shields which are released should a spin occur.

Stough, H. Paul, II↗
NASA NTRS1999

Sensor Lead Wires Positioned on SiC-based Monolithic Ceramic and Fiber- reinforced Ceramic Matrix Composite Subcomponents with Flat and Curved Surfaces

There is strong interest in the development of silicon carbide-based monolithic ceramic and composite materials and components for demanding, high-temperature applications. Thorough characterization of material properties, including high-temperature testing under simulated or actual operating conditions, is a high priority for programs involved in developing these silicon carbide- (SiC) based materials and components. Members of the Sensors and Electronics Technology Branch at the NASA Lewis Research Center are developing minimally intrusive methods of measuring the properties (such as the surface temperature, strain, and heat flux characteristics) of components and subelements that are being tested or operated in hostile, high-temperature environments. Their primary goal is to instrument the test article or operating component with durable sensors that have a minimal effect on test conditions such as the gas flow across the surface of the item and the material response (including the through-thickness conduction of heat). Therefore, the main thrust of their work has been the development of thin-film sensors (e.g., thermocouples or strain gauges) for use on various advanced material test articles, including SiC/SiC composite components. There was a need for a better method of securing sensor lead wires on SiC-based components and subelements that would be tested at temperatures to 1000 C (or higher), to enhance the durability of the overall minimally intrusive sensor system. To address this need, Lewis researchers devised an alternative approach for positioning the sensor lead wires (which are connected to the thin-film sensors) on SiC or SiC/SiC components. A reaction-forming method of joining was used to strongly bond hoop-shaped monolithic SiC and SiC/SiC composite attachments of various sizes to both flat and curved surfaces of SiC/SiC composite subelements (see the photos). This approach is based on an affordable, robust ceramic joining technology, named ARCJoinT, which was developed at Lewis for the joining of SiC-based ceramics and fiber-reinforced composites.

Kiser, James D.↗
NASA NTRS2005

Dynamics Modeling and Simulation of Large Transport Airplanes in Upset Conditions

As part of NASA's Aviation Safety and Security Program, research has been in progress to develop aerodynamic modeling methods for simulations that accurately predict the flight dynamics characteristics of large transport airplanes in upset conditions. The motivation for this research stems from the recognition that simulation is a vital tool for addressing loss-of-control accidents, including applications to pilot training, accident reconstruction, and advanced control system analysis. The ultimate goal of this effort is to contribute to the reduction of the fatal accident rate due to loss-of-control. Research activities have involved accident analyses, wind tunnel testing, and piloted simulation. Results have shown that significant improvements in simulation fidelity for upset conditions, compared to current training simulations, can be achieved using state-of-the-art wind tunnel testing and aerodynamic modeling methods. This paper provides a summary of research completed to date and includes discussion on key technical results, lessons learned, and future research needs.

Foster, John V.↗
DOE OSTI2025

Challenges and Perspectives in Lignin‐Derived Polyurethane Foam Synthesis

Abstract Polyurethane foams (PUFs) represent a significant segment of the polyurethane (PU) and cellular plastics industries, owing to their versatile applications and desirable properties. However, the production of PUFs heavily relies on petroleum‐derived chemicals, including polyols and isocyanates, raising critical environmental concerns. Lignin, an abundant aromatic macromolecule, offers a promising alternative for replacing petroleum‐based polyols because of its intrinsic hydroxyl groups. While efforts have been made to produce and apply various lignin‐based polyurethane foams (LPUFs), their commercialization remains limited by challenges such as low product consistency, poor technical performances, and high production costs. This study critically evaluates recent advances in the development of LPUFs, including innovative synthesis methods, functional applications, and emerging research trends. Moreover, potential strategies are discussed, such as lignin fractionation, modification, and co‐solvent assistance, for addressing the challenges. By resolving them, LPUFs could play a pivotal role in transitioning the PU industry to help achieve a circular bioeconomy.

Zhang, Mairui [Carl and Melinda Helwig Department ↗
DOE OSTI2025

Characterizing Disorders Within Cathode Materials of Lithium‐Ion Batteries

The demand for developing high-energy density cathode materials has been increasing. The energy densities of cathode materials have been improved by adapting structural deviation from the ideal fully ordered α-NaFeO2 type, but that led to limitations in terms of structural stability and safety. Although disorders in cathode materials are closely related to their electrochemical properties, unfortunately, characterizing the disorder itself in cathode materials has been challenging due to its complex parasitic reaction and strong correlation with other disorders occurring during charge/discharge. In this review, we categorize various disorders by their scales of ordering from short-range to long-range. We addressed the principles of various characterization tools to figure out how they can help to identify the structural disorder in cathode materials. Specifically, we focused on the underlying principles of each characterization technique to correlate different disorder-driven phenomena through several case studies. It underscores the substantial importance of disorder-property relationships and the corresponding characterization methods, which can provide novel research strategies for developing high-energy density cathode materials with decent structural stability.

Lee, Hakwoo↗
DOE OSTI2022

Chapter 20: Advances and Application of CRISPR-Cas Systems

A new gene-editing technique called clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated (Cas) proteins have revolutionized genome engineering because of its high efficiency, relatively low cost, and ease of use compared with other techniques such as zinc-finger nucleases and transcription activator-like effector nucleases. CRISPR-Cas systems have transformed biological research, quickly becoming the preferred method for engineering specific genome sequences in industrially relevant microbes, important food crops, and human cells. This powerful new tool has the potential for limitless applications ranging from the treatment of human diseases to improving food security to the generation of renewable and sustainable bioproducts and biofuels. In this chapter, we will discuss advances and applications for these CRISPR-Cas systems in biological engineering.

bacterial↗
DOE OSTI2025

A worldwide aerosol phenomenology: Elemental and organic carbon in PM 2.5 and PM 10

Elemental carbon (EC), organic carbon (OC), and particulate matter (PM) concentrations in the inhalable (PM 10 ) and fine (PM 2.5 ) size fractions are measured worldwide, albeit with different analytical methods. These measurements from many researchers were collected and analyzed for Africa, America, Asia, and Europe for 2012–2019. EC/PM, OC/PM, and OC/EC ratios were examined based on region, site type, and season to infer potential sources and impacts. These analyses demonstrate that carbonaceous materials are important PM constituents throughout the world. Mean EC/PM ratios were lowest in PM 10 in Sahelian Africa and Europe (∼0.01), highest (>0.07) in PM 2.5 at urban sites in North America, South America, and Japan. Mean OC/PM ratios were lowest in PM 10 in the Sahel (∼0.06) and in PM 2.5 in China and Thailand (0.10), and highest in central and eastern Europe (∼0.3) and North America (∼0.4). OC/EC ratios were elevated in western and northern Europe, and at regional background sites in North America. EC/PM increased with PM 10 in Thailand, while OC/PM increased with higher PM mass in Thailand, India, and North America, highlighting the specific contribution of carbonaceous aerosols to PM pollution in these regions. At European and North American background sites, OC/EC ratios increased with PM mass. Higher OC/EC ratios in dry periods indicate influence of wildfires, prescribed burns, and secondary aerosol formation. Elevated wintertime EC/PM ratios coincide with residential heating in temperate climate zones.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Revisiting the SGTE lattice stability of bcc aluminum

The CALPHAD framework rests on the ability to assign well-defined free energies to all phases, including mechanically unstable ones. Given the experimental difficulties associated with the latter, researchers have turned to computational methods to obtain a theoretically justified definition of the free energy of mechanically unstable phases. Recently, a method called “inflection detection” has been shown to yield free energies that are broadly consistent with the current SGTE (Scientific Group Thermodata Europe) standard for pure elements, which were obtained through an extrapolation of stable solid solutions free energies towards unstable end members. Despite this general agreement, apparent failures for a few elements stand out, notably for the bcc–fcc enthalpy difference for the common element Al. Furthermore we revisit the definition of the bcc Al enthalpy and show that a careful CALPHAD-based analysis of enthalpy trends in five different mechanically stable binary solid solutions in fact does agree very well with the inflection-detection approach.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The effects of outdoor air-side fouling on frost growth and heat transfer characteristics of a microchannel heat exchanger: An experimental study

Air source heat pumps have the potential to efficiently heat and cool buildings, but their effectiveness in many climates is limited by frost growth on the outdoor heat exchanger in heating mode. These heat exchanger coils are also subject to fouling from fibers and particulates outdoors. Frost and fouling have each independently been studied extensively, and newly available research on fouling provides a method to realistically foul the air-side of coils in the laboratory. The current paper uses this method to conduct the first laboratory study of the important interactions between fouling and frost growth for a heat pump outdoor coil. A microchannel heat exchanger is tested clean and fouled, with variations in fouling level, humidity, and initial face velocity of air. Air flow rate is allowed to vary with resistance, and a surprising result is that light fouling increases heat transfer and frost growth rates, even with a 3.5% reduction in initial airflow caused by the fouling. However, heavier fouling decreases both rates. When frost growth is normalized to heat transfer, it is found to be increased by fouling; i.e. the coil’s sensible heat ratio decreases.

42 ENGINEERING↗
DOE OSTI2022

Shifting temporal dynamics of human mobility in the United States

In this paper we analyze the average hourly temporal dynamics of human mobility in the United States from 2019 to 2020. We discuss how large decreases in human mobility nonuniformly effect the daily temporal dynamics of aggregate human behavior. The data used are weekly activity patterns for POIs from 2019 to 2020 in the United States, provided by SafeGraph and made openly available to academic and research institutions. We use clustering methods to create metrics describing how human activity changes throughout the day/week at the county and national levels. In response to significant mobility reductions starting March 2020, daily temporal patterns of human activity changed nonuniformly. Morning activity started later, and evening activity started earlier in 2020 compared to 2019, and temporal behavioral patterns on weekdays began to look more similar to weekends. The changes in daily temporal behavior persisted throughout the year even as total mobility levels recovered. The results provide insights on the changes in human behavior in response covid-19 policies and illustrate influences on social systems, health, and transportation networks.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Sequential Bayesian inference of transition rates in the hidden Markov model for multi-state system degradation

The more easily available system performance data and advances in data analytics have provided us with opportunities to optimize maintenance programs for engineered systems, for example nuclear power plants. One key task in maintenance optimization is to obtain an accurate model for system degradation. Here, in this research, we propose a Bayesian method to address this problem. Noting that systems usually exhibit multiple states and that the actual state of a system usually is not directly observable, in the method we first model the system degradation process and the observation process based on a hidden Markov model. Then we develop a sequential Bayesian inference algorithm based on importance sampling and the forward algorithm to infer the posterior distributions of the transition rates in the hidden Markov model based on available observations. The proposed Bayesian method allows us to take advantage of evidence from multiple sources, and also allows us to perform Bayesian inference sequentially, without the need to use the entire history of observations every time new observations are collected. We demonstrate the proposed method using both synthetic data for a nuclear power plant feedwater pump and realistic data for a nuclear power plant chemistry analytical device.

42 ENGINEERING↗
DOE OSTI2022

Temporal variabilities of soil carbon dioxide fluxes from cornfield impacted by temperature and precipitation changes through high-frequent measurement and DAYCENT modelling

Soil carbon dioxide (CO 2 ) emissions from the field of corn (Zea mays L.) play an important role in global warming. This study investigated temporal variability of soil CO 2 fluxes (R s ) with soil temperature (T s ) and moisture (θ) and built DAYCENT models for predicting future impacts of climate changes on R s using the measured high-frequency data. R s trend was tested by Mann–Kendall and Sen Estimator. Predicted R s s under different climate scenarios were compared using Parallel-line Analysis. Herein, the findings indicated that daily R s exponentially increased with T s constrained by θ. During the θ of 27–31%, there was a strong exponential relationship between R s and T s , but the relationship was weaker for the θ of 38–41% and 22–26%. Soil environmental index (SEI, T s × θ) significantly impacted R s with linear regression R s 0.5 = 0.4599 + 0.002059 × SEI in 2008, 2009 and 2011. At the diurnal scale, there were different trends in R s s and relationships among R s and T s and θ in different years. Predicted yearly R s s, root R s s and corn yield in 2014–2049 increased with an increase in temperature scenarios, but the R s s significantly increased as temperature rose by 1°C or higher. Predicted yearly R s s, root R s s and yield reduced with precipitation scenario increase, and the root R s s and yield significantly diminished as precipitation increased by 15 and 30%. Predicted yearly R s from cornfields had a significantly increasing trend. Future research is needed to explore methods for mitigating cornfield R s and evaluating sensitivities of different cropland R s s to temperature changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Theoretical and Experimental Insights into CO 2 Capture and Methanation over Amine-Grafted Ru-Based Catalysts

Carbon capture and storage (CCS) technologies, along with CO 2 capture and conversion methods, have emerged as crucial research areas to address rising CO 2 emissions. In this study, we seek to understand the mechanistic role of amines in enabling lower-energy pathways for CO 2 conversion. Our research focuses on the development and analysis of dual-functional materials (DFMs) engineered for the reactive capture and conversion (RCC) of CO 2 into methane, utilizing Ru catalysts grafted with amine groups. We employ Density Functional Theory (DFT) calculations using methylamine as a model amine to investigate the impact of amine groups on CO 2 methanation on a Ru(0001) surface, both in the presence and absence of amine groups. The amine ligand alters the carbon coordination environment, promoting direct C–O dissociation and potentially destabilizing the CO* adsorbate, thereby reducing the risk of CO poisoning. Additionally, we observe a preference for hydrogenation, although it becomes more energetically uphill in the amine-bound scenario. Our experiments, however, report similar CO 2 conversion and CH 4 production rates over the synthesized catalysts “Ru/TiO 2 ” and the amine (N-(2-aminoethyl)-3-aminoproplytrimethoxysilane (“diaminosilane”)) deposited catalyst “Diamine−Ru/TiO 2 ”. By constructing comparative reaction-free energy diagrams and performing microkinetic modeling (MKM) simulations, we link our theoretical findings with experimentally observed CO 2 uptake, conversion, and methane production rates. A microkinetic model was employed to investigate the anomaly, showing reduced amine–carbon complex coverage and increased CO 2 coverage at all temperatures. The MKM simulations consistently confirmed these trends. In conclusion, this comprehensive approach offers key insights into the role of the amine-CO 2 bond in methanation, highlighting a pathway toward lower-energy, more efficient CO 2 capture and conversion processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Irradiation-Driven Restructuring of UO 2 Thin Films: Amorphization and Crystallization

Combustion synthesis in uranyl nitrate–acetylacetone–2-methoxyethanol solutions was used to deposit thin UO 2 films on aluminum substrates to investigate the irradiation-induced restructuring processes. Thermal analysis revealed that the combustion reactions in these solutions are initiated at ~160 °C. The heat released during the process and the subsequent brief annealing at 400 °C allow the deposition of polycrystalline films with 5–10 nm UO 2 grains. The use of multiple deposition cycles enables tuning of the film thicknesses in the 35–260 nm range. Irradiation with Ar 2+ ions (1.7 MeV energy and a fluence of up to 1 × 10 17 ions/cm 2 ) is utilized to generate a uniform distribution of atomic displacements within the films. X-ray fluorescence (XRF) and alpha-particle emission spectroscopy showed that the films were stable under irradiation and did not undergo sputtering degradation. X-ray photoelectron spectroscopy (XPS) showed that the stoichiometry and uranium ionic concentrations remain stable during irradiation. The high-resolution electron microscopy imaging and electron diffraction analysis demonstrated that at the early stages of irradiation (below 1 × 10 16 ion/cm 2 ) UO 2 films show complete amorphization and beam-induced densification (sintering), resulting in a pore-free disordered film. Prolonged irradiation (5 × 10 16 ion/cm 2 ) is shown to trigger a crystallization process at the surface of the films that moves toward the UO 2 /Al interface, converting the entire amorphous material into a highly crystalline film. This work reports on an entirely different radiation-induced restructuring of the nanoscale UO 2 compared to the coarse-grained counterpart. The preparation of thin UO 2 films deposited on Al substrates fills an area of national need within the stockpile stewardship program of the National Nuclear Security Administration and fundamental research with actinides. Here, the method reported in this work produces pure, robust, and uniform thin-film actinide targets for nuclear science measurements

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Advanced Microstructured BaTiO 3 -Embedded PVDF–HFP/PEO Film for Enhanced Triboelectric Interface in Self-Sufficient Energy Generation and Sensing

The global reliance on fossil fuels and natural gas has largely dominated the energy production field, but due to finite resource depletion and escalating greenhouse gas emissions, the immediate exploration of sustainable energy alternatives to mitigate climate change and ensure resource security has been a major concern. There has been extensive research into other more renewable methods of energy production, such as wind and hydropower. Of these current energy generation types, there are many areas of untapped potential from the mechanical movements generated ambiently not only in the large scale of power generation but also on a smaller scale. The piezoelectric and triboelectric effects are phenomena where these ambient mechanical movements can generate electrical energy. Developing a hybrid system that leverages both mechanical stress and surface charges presents an ideal opportunity to exploit these untapped energy sources. Producing a hybrid PVDF–HFP/PEO film with perovskite BaTiO 3 (BTO) enables ambient power harvesting from both mechanical movement and surface charge. The optimized cell produced a potential of up to 15 V and a current of 200 nA with a 68 kΩ resistor, a substantial increase from a base system with an average of 2.1 V and 40 nA. These hybrid TENGs offer significant potential for energy harvesting in small-scale applications, such as health monitoring devices and indicators in electric circuits.

Ybarra, Rigobert [University of Texas Rio Grande V↗
DOE OSTI2021

Unexpected inverse correlations and cooperativity in ion-pair phase transfer

Liquid/liquid extraction is one of the most widely used separation and purification methods, where a forefront of research is the study of transport mechanisms for solute partitioning and the relationships that these have to solution structure at the phase boundary. To date, organized surface features that include protrusions, water-fingers, and molecular hinges have been reported. Many of these equilibrium studies have focused upon small-molecule transport – yet the extent to which the complexity of the solute, and the competition between different solutes, influence transport mechanisms have not been explored. Here we report molecular dynamics simulations that demonstrate that a metal salt (LiNO 3 ) can be transported via a protrusion mechanism that is remarkably similar to that reported for H 2 O by tri-butyl phosphate (TBP), a process that involves dimeric assemblies. Yet the LiNO 3 out-competes H 2 O for a bridging position between the extracting TBP dimer, which in-turn changes the preferred transport pathway of H 2 O. Examining the electrolyte concentration dependence on ion-pair transport unexpectedly reveals an inverse correlation with the extracting surfactant concentration. As [LiNO 3 ] increases, surface adsorbed TBP becomes a limiting reactant in correlation with an increased negative surface charge induced by excess interfacial NO 3 – , however the rate of transport is enhanced. Within the highly dynamic interfacial environment, we hypothesize that this unique cooperative effect may be due to perturbed surface organization that either decreases the energy of formation of transporting protrusion motifs or makes it easier for these self-assembled species to disengage from the surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗