Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ray trace”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Accuracy control in Monte Carlo radiative calculations

The general accuracy law that rules the Monte Carlo, ray-tracing algorithms used commonly for the calculation of the radiative entities in the thermal analysis of spacecraft are presented. These entities involve transfer of radiative energy either from a single source to a target (e.g., the configuration factors). or from several sources to a target (e.g., the absorbed heat fluxes). In fact, the former is just a particular case of the latter. The accuracy model is later applied to the calculation of some specific radiative entities. Furthermore, some issues related to the implementation of such a model in a software tool are discussed. Although only the relative error is considered through the discussion, similar results can be derived for the absolute error.

Almazan, P. Planas↗

Numerical and experimental analyses of the radiant heat flux produced by quartz heating systems

A method is developed for predicting the radiant heat flux distribution produced by tungsten filament, tubular fused-quartz envelope heating systems with reflectors. The method is an application of Monte Carlo simulation, which takes the form of a random walk or ray tracing scheme. The method is applied to four systems of increasing complexity, including a single lamp without a reflector, a single lamp with a Hat reflector, a single lamp with a parabolic reflector, and up to six lamps in a six-lamp contoured-reflector heating unit. The application of the Monte Carlo method to the simulation of the thermal radiation generated by these systems is discussed. The procedures for numerical implementation are also presented. Experiments were conducted to study these quartz heating systems and to acquire measurements of the corresponding empirical heat flux distributions for correlation with analysis. The experiments were conducted such that several complicating factors could be isolated and studied sequentially. Comparisons of the experimental results with analysis are presented and discussed. Good agreement between the experimental and simulated results was obtained in all cases. This study shows that this method can be used to analyze very complicated quartz heating systems and can account for factors such as spectral properties, specular reflection from curved surfaces, source enhancement due to reflectors and/or adjacent sources, and interaction with a participating medium in a straightforward manner.

Turner, Travis L.↗

Hybrid techniques for complex aerospace electromagnetics problems

Important aerospace electromagnetics problems include the evaluation of antenna performance on aircraft and the prediction and control of the aircraft's electromagnetic signature. Due to the ever increasing complexity and expense of aircraft design, aerospace engineers have become increasingly dependent on computer solutions. Traditionally, computational electromagnetics (CEM) has relied primarily on four disparate techniques: the method of moments (MoM), the finite-difference time-domain (FDTD) technique, the finite element method (FEM), and high frequency asymptotic techniques (HFAT) such as ray tracing. Each of these techniques has distinct advantages and disadvantages, and no single technique is capable of accurately solving all problems of interest on computers that are available now or will be available in the foreseeable future. As a result, new approaches that overcome the deficiencies of traditional techniques are beginning to attract a great deal of interest in the CEM community. Among these new approaches are hybrid methods which combine two or more of these techniques into a coherent model. During the ASEE Summer Faculty Fellowship Program a hybrid FEM/MoM computer code was developed and applied to a geometry containing features found on many modern aircraft.

Aberle, Jim↗

A sounding rocket program in extreme and far ultraviolet interferometry

A self-compensating, all reflection interferometric (SCARI) spectrometer was developed that can provide high resolution measurements of spectral features at any wavelength. Several mechanical components were developed that aid the instrument's performance at the short wavelength range. Examples include an optical bench and modular removable precision mechanisms for alignment. Upon alignment and lock down of the interferometer with the latter, the device is removed to minimize weight. A ray-trace code was developed to simulate the instrument's performance. Interference patterns were obtained at the shortest wavelength: the hydrogen Lyman alpha (1216 A). A laboratory instrument was developed that will be flown aboard a Black Brant sounding rocket to study the very local interstellar medium.

Chakrabarti, S.↗

Correction-free pyrometry in radiant wall furnaces

A specular, spherical, or near-spherical target is located within a furnace having inner walls and a viewing window. A pyrometer located outside the furnace 'views' the target through pyrometer optics and the window, and it is positioned so that its detector sees only the image of the viewing window on the target. Since this image is free of any image of the furnace walls, it is free from wall radiance, and correction-free target radiance is obtained. The pyrometer location is determined through a nonparaxial optical analysis employing differential optical ray tracing methods to derive a series of exact relations for the image location.

Thomas, Andrew S. W.↗

Plasma and radio waves from Neptune: Source mechamisms and propagation

The purpose of this project was to conduct a comprehensive investigation of the radio wave emission observed by the planetary radio astronomy (PRA) instrument on board Voyager 2 as it flew by Neptune. The study has included data analysis, theoretical and numerical calculations, and ray tracing to determine the possible source mechanisms and locations of the radiation, including the narrowband bursty and smooth components of the Neptune radio emission.

Menietti, J. Douglas↗

Measurement and interpretation of crustal deformation rates associated with postglacial rebound

Analysis of Global Positioning System (GPS) data from two sites separated by horizontal distance of only approximately 2.2 m yielded phase residuals exhibiting a systematic elevation angle dependence. One of the two GPS antennas was mounted on an approximately 1 m high concrete pillar, and the other was mounted on a standard wooden tripod. We performed elevation angle cutoff tests with these data, and established that the vertical coordinate of site position was sensitive to the minimum elevation angle (elevation cutoff) of the data analyzed. For example, the vertical coordinate of site position changed by 9.7 plus or minus 0.8 mm when the minimum elevation angle was increased from 10 to 25. We performed simulations based on a simple (ray tracing) multipath model with a single horizontal reflector, and demonstrated that the elevation angle cutoff test results and the pattern of the residual versus elevation angle could be qualitatively reproduced if the reflector were located 0.1-0.2 m beneath the antenna phase center. We therefore, hypothesized that the source of the elevation-angle-dependent error were multipath reflections and scattering and that the horizontal surface of the pillar, located a distance of approximately 0.2 m beneath the antenna phase center, was the primary reflector. We tested this hypothesis by placing microwave absorbing material between the antenna and the pillar in a number of configurations and analyzed the changes in apparent position of the antenna. The results indicate that (1) the horizontal surface of the pillar is indeed the main reflector, (2) both the concrete and the metal plate embedded in the pillar are significant reflectors, and (3) the reflection can be reduced to a great degree by the use of microwave absorbing materials. These results have significant implications for the accuracy of global GPS geodetic tracking networks which use pillar-antenna configuration identical or similar to the one used here (at the Westford WFRD GPS site).

Davis, James L.↗

Radio sounding of the magnetosphere from a lunar-based VLF array

Using a lunar-based active radio transmitter and receiver system operating in the 'free space' wave modes, we can obtain much information on the structures and dynamics of remote magnetospheric plasma regions in a way similar to ionosondes. Powerful, narrow-band electromagnetic pulses can be transmitted over a wide frequency range (from 10 kHz to 1 MHz). The signals would be refracted and reflected off magnetospheric structures such as the plasmapause, plasmasheet, magnetopause, and the high and low latitude boundary layers. With a series of long dipole antennas, ranging in size from 400 m to 20 km with an output voltage ranging from 6 kV to less than 0.2 kV, a target plasma region at up to 100 R(sub E) can be explored. We illustrate this remote sensing technique by using the plasmasphere as a remote target, and modeling the propagations of the sounder transmitted and received pulses by ray tracing calculations.

Green, James L.↗

DE 1 VLF observations during Activny wave injection experiments

We report on coordinated high-altitude satellite observations in support of one of the first space-based very low frequency (VLF) wave injection experiments, namely the USSR Aktivny mission. The Aktivny satellite (A) was designed to carry a VLF transmitter (nominal frequency approximately 10 kHz, transmitter power approximately 10 kW) coupled to a 20-m-diameter loop antenna in a nearly polar orbit (83 deg inclination, apogee approximately 2500 km, perigee approximately 500 km). We focus our attention on conjunction experiments between the Aktivny and DE 1 satellites. Because of problems in the deployment of the loop antenna, the radiated power capability of the antenna was significantly reduced. Although this substantially reduced the expectation of receiving detectable signal levels on the satellite, the DE 1/Aktivny conjunction experiments were nevertheless carried out as a means of possibly placing an upper limit on the radiated power. During the period November 1989 through April 1990, a total of 10 DE 1/Aktivny wave injection sessions were conducted. During each session the Aktivny transmitter operated at 10.537 kHz with 1 s On - 1 s Off format, for a period of 6 min centered around the conjunction time. During three conjunction periods (December 12, 26, and 27, 1989) both DE 1 and Aktivny were in the southern hemisphere, and DE 1 was at relatively low altitudes (ranging from 6211 to 14,810 km), thus providing the best conjunction possibilities according to the ray tracing criteria developed above. On most days, Omega transmitter signals as well as commonly occuring natural wave phenomena such as whistlers (0(+)) and hiss were clearly seen well above the background level, but there was no evidence of the Aktivny 1 s On/ 1 s Off pattern. Though no Aktivny signals were detected by the LWR on the DE 1 satellite, the experimental constraints allow us to place an upper limit on the total power radiated by the Aktivny transmitter in the whistler-mode. Using experimental parameters, and the minimum detectable signal level of 0.05 muV/m for LWR, we find the upper limit on the total power radiated by the Aktivny satellite in the whistler-mode to be approximately 10 mW. Several recommendations for future space-based wave injection experiments are presented.

Sonwalkar, V. S.↗

The source of Jovian auroral hiss observed by Voyager 1

Observations of auroral hiss obtained from the Voyager 1 encounter with Jupiter have been reanalyzed. The Jovian auroral hiss was observed near the inner boundary of the warm Io torus and has a low-frequency cutoff caused by propagation near the resonance cone. A simple ray tracing procedure using an offset tilted dipole of the Jovian magnetic field is used to determine possible source locations. The results obtained are consistent with two sources located symmetrically with respect to the centrifugal equator along an L shell (L approximately = 5.59) that is coincident with the boundary between the hot and cold regions of the Io torus and is located just inward of the ribbon feature observed from Earth. The distance of the sources from the centrifugal equator is approximately 0.58 +/- 0.01 R(sub J). Based on the similarity to terrestrial auroral hiss, the Jovian is auroral hiss is believed to be generated by beams of low energy (approximately tens to thousands of eV) electrons. The low-frequency cutoff of the auroral hiss suggests that the electrons are accelerated near the inferred source region, possibly by parallel electric fields similar to those existing in the terrestrial auroral regions. A field-aligned current is inferred to exist at L shells just inward of the plasma ribbon. A possible mechanism for driving this current is discussed.

Morgan, D. D.↗

Landau damping of auroral hiss

Auroral hiss is observed to propagate over distances comparable to an Earth radius from its source in the auroral oval. The role of Landau damping is investigated for upward propagating auroral hiss. By using a ray tracing code and a simplified model of the distribution function, the effect of Landau damping is calculated for auroral hiss propagation through the environment around the auroral oval. Landau damping is found to be the likely mechanism for explaining some of the one-sided auroral hiss funnels observed by Dynamics Explorer 1. It is also found that Landau damping puts a lower limit on the wavelength of auroral hiss. Poleward of the auroral oval, Landau damping is found in a typical case to limit omega/k(sub parallel) to values of 3.4 x 10(exp 4) km/s or greater, corresponding to resonance energies of 3.2 keV or greater and wavelengths of 2 km or greater. For equatorward propagation, omega/k(sub parallel) is limited to values greater than 6.8 x 10(exp 4) km/s, corresponding to resonance energies greater than 13 keV and wavelengths greater than 3 km. Independent estimates based on measured ratios of the magnetic to electric field intensity also show that omega/k(sub parallel) corresponds to resonance energies greater than 1 keV and wavelengths greater than 1 km. These results lead to the difficulty that upgoing electron beams sufficiently energetic to directly generate auroral hiss of the inferred wavelength are not usually observed. A partial transmission mechanism utilizing density discontinuities oblique to the magnetic field is proposed for converting auroral hiss to wavelengths long enough to avoid damping of the wave over long distances. Numerous reflections of the wave in an upwardly flared density cavity could convert waves to significantly increased wavelengths and resonance velocities.

Morgan, D. D.↗

N-bursty emission from Uranus: A cyclotron maser source?

Ray tracing studies of RX-mode emission from the north polar regions of Uranus indicate that the n-bursty radio emission may have a source along field lines with footprints near the northern magnetic pole (perhaps in the cusp), but not necessarily associated with regions of strong UV emission. This is in contrast with similar studies for the Uranus nightside smooth radio emission, which are believed to be due to the cyclotron maser instability. Source regions can be found for both hollow and filled emission cones and for frequencies well above the local gyrofreuquency implying that mechanisms other than the cyclotron maser mechanism may be operating.

Curran, D. B.↗

Estimating gravity wave parameters from oblique high-frequency backscatter: Modeling and analysis

A new technique for estimating electron density perturbation amplitudes of traveling ionospheric disturbances (TIDs), using HF radar data, is presented. TIDs are observed in HF radar data as enhancements of the ground-scattered power which propagate through the radar's field of view. These TIDs are the ionospheric manifestation of atmospheric acoustic-gravity waves. TID electron density perturbation amplitudes were estimated by simulating the radar returns, using HF ray tracing through a model ionosphere perturbed by a model gravity wave. The simulation determined the return power in the ground-scattered portion of the signal as a function of range, and this was compared to HF radar data from the Goose Bay HF radar at a time when evidence of gravity waves was present in the data. By varying the amplitude of the electron density perturbation in the model it was possible to estimate the perturbation of the actual wave. It was found that the perturbations that are observed by the Goose Bay HF radar are of the order of 20% to 35%. It was also found that the number of observable power enhancements, and the relative amplitudes of these enhancements, depended on the vertical thickness of the gravity wave's source region. From the simulations and observations it was estimated that the source region for the case presented here was approximately 20 km thick. In addition, the energy in the wave packet was calculated and compared to an estimate of the available energy in the source region. It was found that the wave energy was about 0.2% of the estimated available source region energy.

Bristow, W. A.↗

Ulysses observations of auroral hiss at high Jovian latitudes

During the Ulysses flyby of Jupiter, a whistler-mode emission was periodically detected by the unified Radio and Plasma wave (URAP) experiment during intervals when the spacecraft extended to high magnetic latitudes. The signal was detected between the local electron plasma frequency and lower hybrid resonance and appears as a funnel-shaped structure on frequency-versus-time spectrograms; these characteristics are very reminiscent of whistler-mode auroral hiss observed at high latitudes at Earth. Ray tracing of the emission occurrences suggests the emission source is on magnetic field lines extending out to at least 65 R(sub J). This location associates the emission with the boundary between open and closed field lines -- not the Io torus. The emission radiates about 10(exp 7) W of power. Consequently, the auroral input power derived from the solar wind to drive the emission is believed to be 10(exp 10-12) W (or about 1% of the energy associated with Io torus electrical processes).

Farrell, W. M.↗

CAD-based stand-alone spacecraft radiation exposure analysis system: An application of the early man-tended Space Station

Major improvements have been completed in the approach to analyses and simulation of spacecraft radiation shielding and exposure. A computer-aided design (CAD)-based system has been developed for determining the amount of shielding provided by a spacecraft and simulating transmission of an incident radiation environment to any point within or external to the vehicle. Shielding analysis is performed using a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design programs such as a Mars transfer habitat, pressurized lunar rover, and the redesigned international Space Station. Results of analysis performed for the Space Station astronaut exposure assessment are provided to demonastrate the applicability and versatility of the system.

Appleby, M. H.↗

The Teton fault, Wyoming: Topographic signature, neotectonics, and mechanisms of deformation

We integrated geophysical and geological methods to evalute the structural evolution of the active Teton normal fault, Wyoming, and its role in the development of the dramatic topography of Teton Range and Jackson Hole. Comparison of variations in surface offsets with the topographic expression of the Teton range crest and drainage divide, and the overall structure of the range, suggests that the effects ofpostglacial faulting cannot be discriminated from the influence of pre-extensional structures and differential; erosion on the footwall topography. In contrast, the effects of multiple scarp-forming normal faulting earthquakes are expressed by the anomalous drainage pattern and westward tilt of the hanging wall, Jackson Hole, toward the Teton fault. Kinematic boundary element fault models suggest that the westward tilt of the valley floor is the product of 110-125 m of displacement on a 45 deg-75 deg E dipping Teton fault in the past 25,000-75,000 years. Comparisons with historic normal faulting earthquake displacements imply that this range of displacement corresponds to 10-50, M greater than 7 scarp-forming earthquakes. A total throw of 2.5 to 3.5 km across the Teton fault is suggested by inverse ray-tracing and forward gravity models. These models also suggest that Laramide age structures have been offset across the Teton fault and obscure its geophysical signature but also continue to influence the structural and topographic expression of the footwall and hanging wall blocks. Paleomagnetic analyses of the approximately 2.0 Ma Huckelberry Ridge Tuff suggest that the overall westward tilt of the Teton Range is a result ofabout 10 deg of west side down tilt across the Teton fault since tuff emplacement. This suggests that much if not all of the throw across the Teton fault has accumulated in the past 2 m.y. Complex demagnetization and rock magnetic behavior and local emplacement of the Huckleberry Ridge Tuff on preexisting topogrpahy preclude determination of the amount or variations in throw along strike of the Teton fault from the paleomagnetic data.

Byrd, John O. D.↗

Simultaneous observations of VLF ground transmitter signals on the DE 1 and COSMOC 1809 satellites: Detection of a magnetospheric caustic and a duct

Khabarovsk transmitter signals (15.0 kHz, 48 deg N, 135 deg E) were observed on the high-altitude (approximately 15000 km) Dynamic Explorer 1 (DE 1) and the low-altitude (approximately 960) km COSMOS 1809 satellites during a 9-day period in August 1989. On 7 out of 9 days the linear wave receiver (LWR) on the DE 1 satellite also detected signals from the Alpha transmitter (11.9-15.6 kHz) in Russia and an Omega transmitter (10.2-13.6 kHz) in Australia, as well as natural VLF emissions such as hiss, chorus, whistlers, and wideband impulsive signals. On two days, August 23 and 27, 1989, observations of the Khabarovsk transmitter signals were simultaneously carried out at high altitude on thre DE 1 satellite and at low altitude on the COSMOS 1809 satellite. Analysis of data from these 2 days has led to several new results on the propagation of whistler mode signals in the Earth's magnetosphere. New evidence was found of previously reported propagation phenomena, such as (1) confinement of transmitter signals in the conjugate hemisphere at ionospheric heights (approximately 1000 km), (2) observation of direct multipath propagation on both DE 1 and COSMOS 1809, (3) detection of ionospheric irregularities of is less than or equal to 100 km scale size with a few percent enhancement in electron density. We also report the first direct detection of a magnetospheric dust at L = 2.94 which was believed to be responsible for the ducted propagation of Khabarovsk signals observed in the COSMOS 1809 satellite. Our study also indicates that duct end points can extend down to at least approximately 1000 km. The peak electric and magnetic fields of ducted Khabarovsk transmitter signals at approximately 1000 km were 520 micro V/m and 36 pT respectively. Estimated field strengths of these signals inside the dust at the geomagnetic equator were 57 micro V/m and 12 pT for electric and magnetic field respectively. The results of two-dimensional ray tracing simulations were consistent with the observations of the nonducted whistler-mode propagation of Khabarovsk (15 kHz) and Alpha (11.9 kHz) signals from the transmitter location to the DE 1 and COSMOS 1809 satellites. Our results have direct implications for the question of accessibility of waves injected from the ground to various regions of the ionosphere and the magnetosphere.

Chmyrev, V. M.↗

Mirages and the nature of Pluto's atmosphere

We present model occultation lightcurves demonstrating that a strong thermal inversion layer at the base of Pluto's stratosphere can reproduce the minimum flux measured by the Kuiper Airborne Observatory (KAO) during the 1988 occultation of a star by Pluto. The inversion layer also forms the occultation equivalent of a mirage at a radius of 1198 km, which is capable of hiding tropospheres of significant depth. Pluto's surface lies below 1198 km, its radius depending on the depth of the troposphere. We begin by computing plausible temperature structures for Pluto's lower atmosphere, constrained by a calculation of the temperature of the atmosphere near the surface. We then trace rays from the occulted star through the model atmosphere, computing the resultant bending of the ray. Model light curves are obtained by summing the contribution of individual rays within the shadow of Pluto on Earth. We find that we can reproduce the KAO lightcurve using model atmospheres with a temperature inversion and no haze. We have explored models with tropospheres as deep as 40 km (implying a Pluto radius of 1158 km) that reproduce the suite of occultation data. Deeper tropospheres can be fitted to the data, but the mutual event radius of 1150 km probably provides a lower bound. If Pluto has a shallow or nonexistent troposphere, its density is consistent with formation in the solar nebula with modest water loss due to impact ejection. If the troposhere is relatively deep, implying a smaller radius and larger density, significant amounts of water loss are required.

Stansberry, J. A.↗