Results for “process performance” — Page 70

DOE OSTI2022

A consolidated bioprocess design to produce multiple high-value platform chemicals from lignocellulosic biomass and its technoeconomic feasibility

5-Hydroxymethyl furfural (HMF) and furfurals are DOE-listed platform chemicals that can be derived from the renewable carbon in the lignocellulosic biomasses and have the potential to replace petroleum-derived alter- natives. High substrate cost and use of expensive solvents limit the economic feasibility of bio-based HMF production on an industrially relevant scale. The study presents an experimental optimized condition that maximizes the chemical-free production of HMF and furfurals without lowering the yield of total fermentable sugars from Saccharum bagasse. Hydrothermal pretreatment at 210 °C for 15 min yielded approximately 10%, 12%, and 46% of HMF, furfurals, and fermentable sugars per gram of dry biomass, respectively. Additionally, the study proposes a consolidated bioprocess model to produce and recover four high-value bioproducts i.e., HMF, furfurals, ethanol, and acetic acid based on the experimental results and evaluates its technoeconomic feasibility considering HMF as the main product. The minimum selling price (MSP) of HMF was estimated to be 930.6 USD/ t which is competitive with its petroleum-derived precursor alternative p-xylene (1,113 USD/t). The sensitivity analysis performed for the process parameters suggests that pretreatment cost and revenues from coproducts immensely influence the MSP of HMF. The preliminary technoeconomic analysis performed on the consolidated bioprocess design indicates that additional revenue streams from diversified coproducts in biorefineries aid in lowering the MSP of high-value bioproducts.

09 BIOMASS FUELS↗

DOE OSTI2022

Data for A Consolidated Bioprocess Design to Produce Multiple High-Value Platform Chemicals from Lignocellulosic Biomass and Its Technoeconomic Feasibility

5-hydroxymethyl furfural (HMF) and furfurals are DOE-listed platform chemicals that can be derived from the renewable carbon in the lignocellulosic biomasses and have the potential to replace petroleum-derived alternatives. High substrate cost and use of expensive solvents limit the economic feasibility of bio-based HMF production on an industrially relevant scale. The study presents an experimental optimized condition that maximizes the chemical-free production of HMF and furfurals without lowering the yield of total fermentable sugars from Saccharum bagasse. Hydrothermal pretreatment at 210 °C for 15 min yielded approximately 10%, 12%, and 46% of HMF, furfurals, and fermentable sugars per gram of dry biomass, respectively. Additionally, the study proposes a consolidated bioprocess model to produce and recover four high-value bioproducts i.e., HMF, furfurals, ethanol, and acetic acid based on the experimental results and evaluates its technoeconomic feasibility considering HMF as the main product. The minimum selling price (MSP) of HMF was estimated to be 930.6 USD/t which is competitive with its petroleum-derived precursor alternative p-xylene (1,113 USD/t). The sensitivity analysis performed for the process parameters suggests that pretreatment cost and revenues from coproducts immensely influence the MSP of HMF. The preliminary technoeconomic analysis performed on the consolidated bioprocess design indicates that additional revenue streams from diversified coproducts in biorefineries aid in lowering the MSP of high-value bioproducts.

Conversion↗

NASA NTRS2012

MAVEN Relay Operations Concept

The Mars Atmosphere and Volatile EvolutioN (MAVEN) mission will launch in late 2013 and following a 10 month cruise to Mars, will study the upper atmosphere of the planet. In addition to the science instruments, the MAVEN spacecraft is equipped with an Electra UHF transceiver to support relay communication with landed assets. This paper describes how UHF relay service is provisioned by MAVEN. The discussion includes a description of the Electra payload, the process by which relay activities are coordinated and accounted for, the process of a typical relay session, including uplink and downlink, as well as special commands to calibrate and verify relay performance. The operational processes for providing these services are inherited largely from prior Mars missions and take advantage of existing infrastructure and lessons learned from those missions. Preliminary data volume return capabilities using adaptive data rates and low-density parity check channel coding are presented.

Electra↗

NASA NTRS2015

Methodology for Producing a Uniform Distribution of UO2 in a Tungsten Matrix

Current work at NASA's Marshall Space Flight Center (MSFC) is focused on the development CERMET fuel materials for Nuclear Thermal Propulsion (NTP). The CERMETs consist of uranium dioxide (UO2) fuel particles embedded in a tungsten (W) metal matrix. Initial testing of W-UO2 samples fabricated from fine angular powders performed reasonably well, but suffered from significant fuel loss during repeated thermal cycling due to agglomeration of the UO2 (1). The blended powder mixtures resulted in a non-uniform dispersion of the UO2 particles in the tungsten matrix, which allows rapid vaporization of the interconnected UO2 from the sample edges into the bulk material. Also, the angular powders create areas of stress concentrations due to thermal expansion mismatch, which eventually cracks the tungsten matrix. Evenly coating spherical UO2 particles with chemical vapor deposited (CVD) tungsten prior to consolidation was previously demonstrated to provide improved performance. However, the CVD processing technology is expensive and not currently available. In order to reduce cost and enhance performance, a powder coating process has been developed at MSFC to produce a uniform distribution of the spherical UO2 particles in a tungsten matrix. The method involves utilization of a polyethylene binder during mixing which leads to fine tungsten powders clinging to the larger UO2 spherical particles. This process was developed using HfO2 as a surrogate for UO2. Enough powder was mixed to make 8 discs (2cm diameter x 8mm thickness) using spark plasma sintering. A uniaxial pressure of 50 MPa was used at four different temperatures (2 samples at each temperature). The first two samples were heated to 1400C and 1500C respectively for 5 minutes. Densities for these samples were less than 85% of theoretical, so the time at temperature was increased to 20 minutes for the remaining samples. The highest densities were achieved for the two samples sintered at 1700C (approx. 92% of theoretical). Scanning electron microscopy (SEM) of the mixed powders and the sintered samples along with energy dispersive x-ray analysis was obtained. The SEM of the powders clearly show the fine W powder adhered to the larger HfO2 particles and a uniform distribution of HfO2 particles in a tungsten matrix upon densification. Vicker's Microhardness testing was also performed on all samples using 0.5, 1.0 and 2.0 kg loads. Five indents were made at each load level. All indents were placed in the tungsten matrix to assist as a proxy in measuring densification. The highest hardness value was obtained for the 1700C specimens. The hardness average for these samples was 312.14 MPa. This powder processing method has been applied to W/UO2 powders with the SEM of the powders appearing similar to the W/HfO2 powder images.

Tucker, Dennis S.↗

NASA NTRS2013

Challenges of Integrating NASAs Space Communication Networks

The transition to new technology, innovative ideas, and resistance to change is something that every industry experiences. Recent examples of this shift are changing to using robots in the assembly line construction of automobiles or the increasing use of robotics for medical procedures. Most often this is done with cost-reduction in mind, though ease of use for the customer is also a driver. All industries experience the push to increase efficiency of their systems; National Aeronautics and Space Administration (NASA) and the commercial space industry are no different. NASA space communication services are provided by three separately designed, developed, maintained, and operated communications networks known as the Deep Space Network (DSN), Near Earth Network (NEN) and Space Network (SN). The Space Communications and Navigation (SCaN) Program is pursuing integration of these networks and has performed a variety of architecture trade studies to determine what integration options would be the most effective in achieving a unified user mission support organization, and increase the use of common operational equipment and processes. The integration of multiple, legacy organizations and existing systems has challenges ranging from technical to cultural. The existing networks are the progeny of the very first communication and tracking capabilities implemented by NASA and the Jet Propulsion Laboratory (JPL) more than 50 years ago and have been customized to the needs of their respective user mission base. The technical challenges to integrating the networks are many, though not impossible to overcome. The three distinct networks provide the same types of services, with customizable data rates, bandwidth, frequencies, and so forth. The differences across the networks have occurred in effort to satisfy their user missions' needs. Each new requirement has made the networks more unique and harder to integrate. The cultural challenges, however, have proven to be a significant obstacle for integration. Over the past few decades of use, user missions and network personnel alike have grown accustomed to the processes by which services are provided by the NASA communications and navigation networks. The culture established by each network has created several challenges that need to be overcome in order to effectively integrate the networks. As with any change, there has been resistance, an apprehension to explore automation of existing processes, and a working environment that attempts to indirectly influence change without mandating compliance. Overcoming technical and cultural challenges is essential to successfully integrating the networks and although the challenges are numerous, the integration of the networks promises a more efficient space communications network for NASA and its customers, as well as potential long-term cost savings to the agency. This paper, Challenges of Integrating NASA Legacy Communications Networks, will provide a brief overview of the current NASA space communications networks as well as the an overview of the process implemented while performing the SCaN Trade Studies and an introduction to the requirements driving integration of the SCaN Networks. This paper will describe in detail the challenges experienced, both technical and cultural, while working with NASA space communications network-specific personnel. The paper will also cover lessons learned during the performance of architecture trade studies and provide recommendations for ways to improve the process.

Reinert, Jessica M.↗

NASA NTRS2013

Challenges of Integrating NASA's Space Communications Networks

The transition to new technology, innovative ideas, and resistance to change is something that every industry experiences. Recent examples of this shift are changing to using robots in the assembly line construction of automobiles or the increasing use of robotics for medical procedures. Most often this is done with cost-reduction in mind, though ease of use for the customer is also a driver. All industries experience the push to increase efficiency of their systems; National Aeronautics and Space Administration (NASA) and the commercial space industry are no different. NASA space communication services are provided by three separately designed, developed, maintained, and operated communications networks known as the Deep Space Network (DSN), Near Earth Network (NEN) and Space Network (SN). The Space Communications and Navigation (SCaN) Program is pursuing integration of these networks and has performed a variety of architecture trade studies to determine what integration options would be the most effective in achieving a unified user mission support organization, and increase the use of common operational equipment and processes. The integration of multiple, legacy organizations and existing systems has challenges ranging from technical to cultural. The existing networks are the progeny of the very first communication and tracking capabilities implemented by NASA and the Jet Propulsion Laboratory (JPL) more than 50 years ago and have been customized to the needs of their respective user mission base. The technical challenges to integrating the networks are many, though not impossible to overcome. The three distinct networks provide the same types of services, with customizable data rates, bandwidth, frequencies, and so forth. The differences across the networks have occurred in effort to satisfy their user missions' needs. Each new requirement has made the networks more unique and harder to integrate. The cultural challenges, however, have proven to be a significant obstacle for integration. Over the past few decades of use, user missions and network personnel alike have grown accustomed to the processes by which services are provided by the NASA communications and navigation networks. The culture established by each network has created several challenges that need to be overcome in order to effectively integrate the networks. As with any change, there has been resistance, an apprehension to explore automation of existing processes, and a working environment that attempts to indirectly influence change without mandating compliance. Overcoming technical and cultural challenges is essential to successfully integrating the networks and although the challenges are numerous, the integration of the networks promises a more efficient space communications network for NASA and its customers, as well as potential long-term cost savings to the agency. This paper, Challenges of Integrating NASA Legacy Communications Networks, will provide a brief overview of the current NASA space communications networks as well as the an overview of the process implemented while performing the SCaN Trade Studies and an introduction to the requirements driving integration of the SCaN Networks. This paper will describe in detail the challenges experienced, both technical and cultural, while working with NASA space communications network-specific personnel. The paper will also cover lessons learned during the performance of architecture trade studies and provide recommendations for ways to improve the process.

Systems Integration↗

NASA NTRS2016

Application of High Speed Digital Image Correlation in Rocket Engine Hot Fire Testing

Hot fire testing of rocket engine components and rocket engine systems is a critical aspect of the development process to understand performance, reliability and system interactions. Ground testing provides the opportunity for highly instrumented development testing to validate analytical model predictions and determine necessary design changes and process improvements. To properly obtain discrete measurements for model validation, instrumentation must survive in the highly dynamic and extreme temperature application of hot fire testing. Digital Image Correlation has been investigated and being evaluated as a technique to augment traditional instrumentation during component and engine testing providing further data for additional performance improvements and cost savings. The feasibility of digital image correlation techniques were demonstrated in subscale and full scale hotfire testing. This incorporated a pair of high speed cameras to measure three-dimensional, real-time displacements and strains installed and operated under the extreme environments present on the test stand. The development process, setup and calibrations, data collection, hotfire test data collection and post-test analysis and results are presented in this paper.

Gradl, Paul R.↗

DOE OSTI2024

A Case Study of Multimodal, Multi-institutional Data Management for the Combinatorial Materials Science Community

Although the convergence of high-performance computing, automation, and machine learning has significantly altered the materials design timeline, transformative advances in functional materials and acceleration of their design will require addressing the deficiencies that currently exist in materials informatics, particularly a lack of standardized experimental data management. The challenges associated with experimental data management are especially true for combinatorial materials science, where advancements in automation of experimental workflows have produced datasets that are often too large and too complex for human reasoning. The data management challenge is further compounded by the multimodal and multi-institutional nature of these datasets, as they tend to be distributed across multiple institutions and can vary substantially in format, size, and content. Furthermore, modern materials engineering requires the tuning of not only composition but also of phase and microstructure to elucidate processing–structure–property–performance relationships. To adequately map a materials design space from such datasets, an ideal materials data infrastructure would contain data and metadata describing (i) synthesis and processing conditions, (ii) characterization results, and (iii) property and performance measurements. In this work, we present a case study for the low-barrier development of such a dashboard that enables standardized organization, analysis, and visualization of a large data lake consisting of combinatorial datasets of synthesis and processing conditions, X-ray diffraction patterns, and materials property measurements generated at several different institutions. While this dashboard was developed specifically for data-driven thermoelectric materials discovery, we envision the adaptation of this prototype to other materials applications, and, more ambitiously, future integration into an all-encompassing materials data management infrastructure.

36 MATERIALS SCIENCE↗

NASA NTRS1966

Surveyor spacecraft system - Surveyor 1 flight performance, volume 1 Final report

Data processing systems, thermal subsystems, design, and mission performance summary for Surveyor 1 spacecraft

Beall, K. C.↗

NASA NTRS1988

VICAR/IBIS Software System

Collection of programs provides extensive capabilities for manipulation of imagery and geographical data. VICAR/IBIS software system is combination of JPL VICAR (Video Image Communications and Retrieval System) image-processing system and JPL IBIS (Image Based Information System) geographic-information-management system. Provides user with extensive general-purpose image-processing capabilities, also information-management system for accepting, converting, and operating on vector (graphical) and tabular data. System used to perform various image processing functions on any sort of digitized image data, including such remotely sensed data as those from Landsat multispectral scanner.

Stanfill, Daniel F., IV↗

NASA NTRS1992

Semi-interpenetrating polymer network for tougher and more microcracking resistant high temperature polymers

This invention is a semi-interpenetrating polymer network which includes a high performance thermosetting polyimide having a nadic end group acting as a crosslinking site and a high performance linear thermoplastic polyimide. An improved high temperature matrix resin is provided which is capable of performing at 316 C in air for several hundreds of hours. This resin has significantly improved toughness and microcracking resistance, excellent processability and mechanical performance, and cost effectiveness.

Pater, Ruth H.↗

NASA NTRS1992

Microgravity effects on standardized cognitive performance measures

The purpose of this experiment, selected to fly on the International Microgravity Laboratory (IML-2) Spacelab mission, is to determine the effects of microgravity upon the cognitive skills which are critical to successful performance of many tasks on board the Space Shuttle. Six tests from the Unified Tri-service Cognitive Performance Assessment Battery (UTC-PAB) will be administered to the Mission Specialists to fulfill the goals of this experiment. These tests are based upon current theoretical models of human performance and the hypothesized effects of microgravity. The principle objective is the identification of the effects of microgravity upon specific information processing skills affecting performance from those of fatigue and shifts in work/rest cycles. Multiple measures of both short and long term fatigue will be obtained and used as a major independent variable for the analysis of these performance data. Scientific supporting studies will determine optimum practice and performance testing schedules for the astronauts. The same tests will be used post-flight to collect data on the recovery of any cognitive performance impairment compared with pre-flight, baseline levels.

Schiflett, Samuel G.↗

NASA NTRSDate not supplied

Evidence-Based Process for Assessing Teamwork Competencies in Applicant Performance in High-Risk, Operational Occupations

In this work, we provide a detailed look at how behavioral competencies necessary for high-risk, operational jobs, including task- and person-oriented aspects of teamwork, leadership, and followership, should be defined and operationalized in context. These competencies are thought to positively predict performance in aerospace professions. Indeed, the assessments applied in high stakes selection contexts and the way associated behavioral competencies are evaluated must be carefully considered to ensure that optimal applicants are selected. We provide insight into the behavioral competency development and measurement process, elaborating upon particularly critical competencies (i.e., team orientation) and describing challenges to measurement.

Isabel Bilotta↗

NASA NTRSDate not supplied

An Efficient Approach to Collect Inlet Characterization Data

This report considers a novel process to acquire performance data for supersonic mixed compression inlets that is faster, and therefore less costly, than the previous one. In the previous process, measurements were recorded in discrete increments. The backpressuring actuator was advanced, there was a pause to allow for airflow fluctuations to diminish, and then the measurements were recorded. While this process was methodical, reliable and accurate, it consumed significant wind-on time. In general, high-speed wind tunnels are expensive to operate considering maintenance, energy and human resource requirements. Furthermore, many facilities, such as blowdown wind tunnels, are limited in the duration that they can maintain the desired test condition. Consequently, a quick method to collect the measurements is desired. A favored approach has the actuator moving in a continuous fashion with measurements recorded as the actuator continuously progresses through the increment points. This approach, identified as the dynamic inlet characteristic data acquisition procedure, uses in situ dynamic high-speed pressure sensors to measure pressure signals. While faster, continuous movement adds dynamic effects to the data. To better understand these dynamic effects and other potential influences, a study was undertaken to compare wind tunnel measurements taken at discrete actuator position points with data gathered during continuous actuator movement. Specially, plots of inlet pressure recovery versus mass capture ratio, or total pressure characteristic curves, were examined. The data were measured during experiments in the NASA Glenn Research Center Abe Silverstein 10- by 10-Foot Supersonic Wind Tunnel (SWT) with an inlet propulsion test article. In this report, the wind tunnel experiment and the study objectives are described. The processes to reduce the data and for analysis are explained. A discussion of the results along with features noted in the data is given. Finally, conclusions from this study that may be used to guide future wind tunnel experiment planning are presented.

Inlet↗

NASA NTRSDate not supplied

An Efficient Approach to Collect Inlet Characterization Data

This report considers a novel process to acquire performance data for supersonic mixed compression inlets that is faster, and therefore less costly, than the previous one. In the previous process, measurements were recorded in discrete increments. The backpressuring actuator was advanced, there was a pause to allow for airflow fluctuations to diminish, and then the measurements were recorded. While this process was methodical, reliable and accurate, it consumed significant wind-on time. In general, high-speed wind tunnels are expensive to operate considering maintenance, energy and human resource requirements. Furthermore, many facilities, such as blowdown wind tunnels, are limited in the duration that they can maintain the desired test condition. Consequently, a quick method to collect the measurements is desired. A favored approach has the actuator moving in a continuous fashion with measurements recorded as the actuator continuously progresses through the increment points. This approach, identified as the dynamic inlet characteristic data acquisition procedure, uses in situ dynamic high-speed pressure sensors to measure pressure signals. While faster, continuous movement adds dynamic effects to the data. To better understand these dynamic effects and other potential influences, a study was undertaken to compare wind tunnel measurements taken at discrete actuator position points with data gathered during continuous actuator movement. Specially, plots of inlet pressure recovery versus mass capture ratio, or total pressure characteristic curves, were examined. The data were measured during experiments in the NASA Glenn Research Center Abe Silverstein 10- by 10-Foot Supersonic Wind Tunnel (SWT) with an inlet propulsion test article. In this report, the wind tunnel experiment and the study objectives are described. The processes to reduce the data and for analysis are explained. A discussion of the results along with features noted in the data is given. Finally, conclusions from this study that may be used to guide future wind tunnel experiment planning are presented.

Data Acquisition↗

NASA NTRS2004

A Novel Biomedical Device Utilizing Light Emitting Nano-Structures

This paper will discuss the development of a novel biomedical detection device that will be used to detect microorganisms with the use of infrared fluorochrome polymers attached to antibodies in fluids such as water. The fluorochrome polymers emit light in the near inferred region (NIR), approximately 805 nm, when excited by an NIR laser at 778 nm. The device could remarkably change the way laboratory testing is done today. The testing process is usually performed on a time scale of days while our device will be able to detect microorganisms in minutes. This type of time efficient analysis is ideal for use aboard the International Space Station and the Space Shuttle (ISS/SS) and has many useful commercial applications, for instance at a water treatment plant and food processing plants. With more research and experimentation the testing might also one day be used to detect bacteria and viruses in complex fluids such as blood, which would revolutionize blood analysis as it is performed today. My contribution to the project has been to develop a process which will allow an antibody/fluorescent dye pair to be conjugated to a specific bacteria or virus and than to to be separated from a sample body of water for detection. The antibody being used in this experiment is anti beta galactosidase and its complement enzyme is beta galactosidase, a non harmful derivative of E. Coli. The anti beta galactosidase has been conjugated to the fluorochrome polymer, IRDye800, which emits at approximately 806 nm. The dye when excited by the NIR laser emits a signal which is detected by a spectrometer and then is read by state of the art computer software. The state-of-the-art process includes incubating the anti beta galactosidase and beta galactosidase in a phosphate buffer solution in a test tube, allowing the antibody to bind to specific sites on the enzyme. After the antibody is bound to the enzyme, it is centrifuged in specific filters that will allow free antibody to wash away and leave the antibody-enzyme complexes on top in solution for testing and analysis. This solution is pipetted into a cuvette, a special plastic test tube, which will then be excited by the laser. The signal read will tell US that an antibody is present and since it is bound to the enzyme, that the bacteria is also present.

Varaljay, Vanessa A.↗

NASA NTRS1995

Software For Diagnosis Of Parallel Processing

Ames Instrumentation System (AIMS) computer program package of software tools measuring and analyzing performances of parallel-processing application programs. Helps programmer to debug and refine, and to monitor and visualize execution of, parallel-processing application software for Intel iPSC/860 (or equivalent) multicomputer. Performance data collected displayed graphically on computer workstations supporting X-Windows.

Hontalas, Philip↗

DOE OSTI2026

Detection of Critical Surface Features in PTLs and GDLs for Improved Device Performance and Manufacturing Reliability

High points, or features that protrude above the surface of the material, on porous transport layers (PTLs) and gas diffusion layers (GDLs) can be critical features that may affect the manufacturing process and the performance of the device containing the feature. High points on PTLs and GDLs may stress the membrane of a polymer electrolyte membrane (PEM) during lamination and cell operation of a PEM electrolyzer or fuel cell. Additionally, high points on GDLs may impact the reliability of the manufacturing process. Thus, understanding these critical features and developing procedures to detect them are a key part of developing quality control techniques for PTLs and GDLs. This work evaluates the effectiveness of the Keyence VR6200 benchtop-scale structured light optical profilometer for detection of surface protrusions on PTLs and GDLs. Standard testing procedures for detecting and measuring high points were created for use on both material types. These procedures were evaluated using Gage Repeatability and Reproducibility (Gage R&R), where the repeatability, reproducibility, and effectiveness of the system to detect and measure high points were quantified. We have shown with high statistical power that the system is very effective in detection and measurement of high points, with Gage R&R contributions measured to be 2.2% and 3.6% for PTLs and GDLs, respectively.

36 MATERIALS SCIENCE↗