Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “passivation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The correlation of active and passive microwave data for the Skylab S-193 sensor

This paper presents the results of the correlation analysis of the Skylab S-193 13.9 GHz Radiometer/Scatterometer data. Computer analysis of the S-193 data shows more than 50 percent of the radiometer and scatterometer data are uncorrelated. The correlation coefficients computed for the data gathered over various ground scenes indicates the desirability of using both active and passive sensors for the determination of various Earth phenomena.

Krishen, Kumar↗
NASA NTRS1994

Passive microwave observations of the Wedell Sea during austral winter and early spring

The results of multispectral passive microwave observations (6.7 to 90-GHz) are presented from the cruises of the FS Polarstern in the Weddell Sea from July to December 1986. This paper includes primarily the analysis of radiometric observations taken at ice station sites. Averaged emissivity spectra for first-year (FY) ice were relatively constant throughout the experiment and were not statistically different from FY ice signatures in the Arctic. Detailed ice characterization was carried out at each site to compare the microwave signatures of the ice with the physical properties. Absorption optical depths of FY ice were found to be sufficiently high that only the structure in the upper portions of the ice contributed significantly to interstation emissivity variations. The emissivities at 90-GHz, e(90), had the greatest variance. Both e(90) at vertical polarization and GR(sub e)(90, 18.7)(defined as (e(sub V)(90)-e(sub V)(18.7))/e(sub V)(90 + e(sub V)(18.7)) depended on the scattering optical depth which is a function of the snow grain diameter and layer thickness. The variance showed a latitude dependence and is probably due to an increase in the strength of snow metamorphism nearer the northern edge of the ice pack. The contribution of variations of near-surface brine volume to the emissivity was not significant over the range of values encountered at the station sites. Emissivity spectra are presented for a range of thin ice types. Unsupervised principal component analysis produced three significant eigenvectors and showed a separation among four different surface types: open water, thin ice, FY ice, and FY ice with a thick snow cover. A comparison with SMMR satellite data showed that average ice concentrations derived from the ship's ice watch log were consistent with the satellite concentrations. The surface based emissivities for FY ice were also compared with emissivities calculated from scanning multichannel microwave radiometer (SMMR) satellite radiances. Best agreement was found at 6.7 and 10-GHz, while at 18 and 37-GHz, SMMR emissivities were slightly lower than surface based results. For the three lower frequencies agreement was found within a confidence limit of 95% and for 37-GHz within about 90%.

Grenfell, T. C.↗
NASA NTRS1994

A passive microwave technique for estimating rainfall and vertical structure information from space. Part 1: Algorithm description

This paper describes a multichannel physical approach for retrieving rainfall and vertical structure information from satellite-based passive microwave observations. The algorithm makes use of statistical inversion techniques based upon theoretically calculated relations between rainfall rates and brightness temperatures. Potential errors introduced into the theoretical calculations by the unknown vertical distribution of hydrometeors are overcome by explicity accounting for diverse hydrometeor profiles. This is accomplished by allowing for a number of different vertical distributions in the theoretical brightness temperature calculations and requiring consistency between the observed and calculated brightness temperatures. This paper will focus primarily on the theoretical aspects of the retrieval algorithm, which includes a procedure used to account for inhomogeneities of the rainfall within the satellite field of view as well as a detailed description of the algorithm as it is applied over both ocean and land surfaces. The residual error between observed and calculated brightness temperatures is found to be an important quantity in assessing the uniqueness of the solution. It is further found that the residual error is a meaningful quantity that can be used to derive expected accuracies from this retrieval technique. Examples comparing the retrieved results as well as the detailed analysis of the algorithm performance under various circumstances are the subject of a companion paper.

Kummerow, Christian↗
NASA NTRS1994

Passive microwave structure of severe tornadic storms on 16 November 1987

Passive microwave observations using the Special Sensor Microwave/Imager (SSM/I) are presented for severe tornadic storms in the lower midwestern United States on 16 November 1987. These measurements are compared with Geostationary Operational Environmental Satellite infrared (IR) measurements for the same case. The IR observations had a classic 'V' cold feature commonly associated with severe Midwest thunderstorms. The minimum microwave brightness temperatures at 86 GHz, which primarily respond to ice scattering by larger ice particles, were located in the convective region and the warm interior of the anvil top, between the arms of the IR V feature. The interior warm region was the only portion of the entire anvil region that had high 86-GHz polarization difference temperatures. Microphysical implications of these multispectral observations are discussed. The observations suggest that there are large variations of ice microphysical characteristics spatially and vertically in the anvil region. These observations are discussed in the context of previous dynamical and microphysical hypotheses on the IR V feature.

Heymsfield, Gerald M.↗
NASA NTRS1995

A method for combining passive microwave and infrared rainfall observations

Because passive microwave instruments are confined to polar-orbiting satellites, rainfall estimates must interpolate across long time periods, during which no measurements are available. In this paper the authors discuss a technique that allows one to partially overcome the sampling limitations by using frequent infrared observations from geosynchronous platforms. To accomplish this, the technique compares all coincident microwave and infrared observations. From each coincident pair, the infrared temperature threshold is selected that corresponds to an area equal to the raining area observed in the microwave image. The mean conditional rainfall rate as determined from the microwave image is then assigned to pixels in the infrared image that are colder than the selected threshold. The calibration is also applied to a fixed threshold of 235 K for comparison with established infrared techniques. Once a calibration is determined, it is applied to all infrared images. Monthly accumulations for both methods are then obtained by summing rainfall from all available infrared images. Two examples are used to evaluate the performance of the technique. The first consists of a one-month period (February 1988) over Darwin, Australia, where good validation data are available from radar and rain gauges. For this case it was found that the technique approximately doubled the rain inferred by the microwave method alone and produced exceptional agreement with the validation data. The second example involved comparisons with atoll rain gauges in the western Pacific for June 1989. Results here are overshadowed by the fact that the hourly infrared estimates from established techniques, by themselves, produced very good correlations with the rain gauges. The calibration technique was not able to improve upon these results.

Kummerow, Christian↗
NASA NTRS1995

Fundamental Limitations Of Passive Power Dividers

Report presents novel theoretical analysis of performance of passive, multiport power dividers like those used to distribute power to radiating elements of array antennas. Typically, unit cell of power-divider network is three- or four-port subnetwork with one port terminated, and subnetworks of network cascaded in multiple layers, so that insertion losses are of major concern.

Antsos, Dimitrios↗
NASA NTRS1995

Aspects of passive magnetic levitation based on high-T(sub c) superconducting YBCO thin films

Passive magnetic levitation systems reported in the past were mostly confined to bulk superconducting materials. Here we present fundamental studies on magnetic levitation employing cylindrical permanent magnets floating above high-T(sub c) superconducting YBCO thin films (thickness about 0.3 mu m). Experiments included free floating rotating magnets as well as well-established flexible beam methods. By means of the latter, we investigated levitation and drag force hysteresis as well as magnetic stiffness properties of the superconductor-magnet arrangement. In the case of vertical motion of the magnet, characteristic high symmetry of repulsive (approaching) and attractive (withdrawing) branches of the pronounced force-displacement hysteresis could be detected. Achievable force levels were low as expected but sufficient for levitation of permanent magnets. With regard to magnetic stiffness, thin films proved to show stiffness-force ratios about one order of magnitude higher than bulk materials. Phenomenological models support the measurements. Regarding the magnetic hysteresis of the superconductor, the Irie-Yamafuji model was used for solving the equation of force balance in cylindrical coordinates allowing for a macroscopic description of the superconductor magnetization. This procedure provided good agreement with experimental levitation force and stiffness data during vertical motion. For the case of (lateral) drag force basic qualitative characteristics could be recovered, too. It is shown that models, based on simple asymmetric magnetization of the superconductor, describe well asymptotic transition of drag forces after the change of the magnet motion direction. Virgin curves (starting from equilibrium, i.e. symmetric magnetization) are approximated by a linear approach already reported in literature only. This paper shows that basic properties of superconducting thin films allow for their application to magnetic levitation or - without need of levitation forces, e.g. microgravity - magnetic damping devices.

Schoenhuber, P.↗
NASA NTRS1995

High-performance passive microwave survey on Josephson Junctions

The quasi-optical generations of images of objects with their internal structure in millimeter (MM) and submillimeter (SMM) bands is one of prime problems of modern radioelectronics. The main advantage of passive MM imaging systems in comparison with visible and infrared (IR) systems is small attenuation of signals in fog, cloud, smoke, dust and other obscurants. However, at a panoramic scanning of space the observation time lengthens and thereby the information processing rate becomes restricted so that single-channel system cannot image in real time. Therefore we must use many radiometers in parallel to reduce the observation time. Such system must contain receiving sensors as pixels in multibeam antenna. The use of Josephson Junctions (JJ) for this purpose together with the cryoelectronic devices like GaAs FET (field effect transistors) or SQUIDS for signal amplifications after JJ is of particular interest in this case.

Denisov, A. G.↗
NASA NTRS1995

HTS thin films: Passive microwave components and systems integration issues

The excellent microwave properties of the High-Temperature-Superconductors (HTS) have been amply demonstrated in the laboratory by techniques such as resonant cavity, power transmission and microstrip resonator measurements. The low loss and high Q passive structures made possible with HTS, present attractive options for applications in commercial, military and spacebased systems. However, to readily insert HTS into these systems improvement is needed in such areas as repeatability in the deposition and processing of the HTS films, metal-contact formation, wire bonding, and overall film endurance to fabrication and assembly procedures. In this paper we present data compiled in our lab which illustrate many of the problems associated with these issues. Much of this data were obtained in the production of a space qualified hybrid receiver-downconverter module for the Naval Research Laboratory's High Temperature Superconductivity Space Experiment 2 (HTSSE-2). Examples of variations observed in starting films and finished circuits will be presented. It is shown that under identical processing the properties of the HTS films can degrade to varying extents. Finally, we present data on ohmic contacts and factors affecting their adhesion to HTS films, strength of wire bonds made to such contacts, and aging effects.

Miranda, F. A.↗
NASA NTRS1995

Passive measurement and interpretation of polarized microwave brightness temperatures

The goal of this project is to develop satellite-based observational techniques for measuring both oceanic and atmospheric variables using passive polarimetric radiometry. Polarimetric radiometry offers a potential alternative to radar scatterometry in observing global ocean surface wind direction from satellites. Polarimetric radiometry might also provide a means of detecting cell-top ice in convective storms by virtue of the polarizing properties of oriented ice particles, and thus facilitate estimation of the phase of the storm. The project focuses on the development of polarimetric microwave radiometers using digital cross-correlators for obtaining precise measurements of all four Stokes' parameters. As part of the project a unique four-band polarimetric imaging radiometer, the Polar Scanning Radiometer (PSR), is being designed for use on the NASA DC-8 aircraft. In addition to providing an aircraft-based demonstration of digital correlation technology the PSR will significantly enhance the microwave imaging capability of the existing suite of DC-8 instruments. During the first grant year excellent progress has been made in the following areas: (1) demonstrating digital correlation radiometry, (2) fabricating aircraft-qualified correlators for use in the PSR, and (3) modeling observed SSM/I brightness signatures of ocean wind direction.

Gasiewski, A. J.↗
NASA NTRS1992

Passive damping augmentation of flexible beam-like lattice trusses for large space structures

A Timoshenko beam continuum model is developed to determine the transient response of a beam-like latticed large space structure, subjected to a unit impulse. It is demonstrated that an increase in diagonal stiffness, on account of the stiffness of the vertical girder, leads to a rise in the transverse shear rigidity. This results in higher natural frequencies and reduction in peak displacement. In addition, in an asymmetrical truss configuration, coupling between the extensional and shear modes raises the maximum peak displacement compared with that obtained for a symmetrical truss. The model is modified to investigate the introduction of passive damping in the form of several dynamic vibration absorbers. A unique absorber parameter optimization procedure, based on the classical steady-state criteria, is used to tune the absorbers, having a total allocated mass budget of 10%, to the first two frequencies of the latticed structure. It is found that inclusion of transverse shear rigidity as a design parameter in damping augmentation studies reduces settling time for predetermined maximum peak displacements.

Cohen, K.↗
NASA NTRS1996

Passive Magnetic Bearing With Ferrofluid Stabilization

A new class of magnetic bearings is shown to exist analytically and is demonstrated experimentally. The class of magnetic bearings utilize a ferrofluid/solid magnet interaction to stabilize the axial degree of freedom of a permanent magnet radial bearing. Twenty six permanent magnet bearing designs and twenty two ferrofluid stabilizer designs are evaluated. Two types of radial bearing designs are tested to determine their force and stiffness utilizing two methods. The first method is based on the use of frequency measurements to determine stiffness by utilizing an analytical model. The second method consisted of loading the system and measuring displacement in order to measure stiffness. Two ferrofluid stabilizers are tested and force displacement curves are measured. Two experimental test fixtures are designed and constructed in order to conduct the stiffness testing. Polynomial models of the data are generated and used to design the bearing prototype. The prototype was constructed and tested and shown to be stable. Further testing shows the possibility of using this technology for vibration isolation. The project successfully demonstrated the viability of the passive magnetic bearing with ferrofluid stabilization both experimentally and analytically.

Jansen, Ralph↗
NASA NTRS1994

Unique passive diagnostic for slapper detonators

The objective of this study was to find a material and configuration that could reliably detect the proper functioning of a slapper (non-explosive) detonator. Because of the small size of the slapper geometry (on the order of a 15 mils), most diagnostic techniques are not suitable. This program has the additional requirements that the device would be used on centrifuge so that it could not use any electrical power or output signals. This required that the diagnostic be completely passive. The paper describes the three facets of the development effort: complete characterization of the slapper using VISAR measurements, selection of the diagnostic material and configuration, and testing of the prototype designs. The VISAR testing required that use of a special optical probe to allow the laser light to reach both bridges of the dual-slapper detonator. Results are given in the form of flyer velocity as a function of the initiating charge voltage level. The selected diagnostic design functions in a manner similar to a dent block except that the impact of the Kapton disk from a properly-functioning slapper causes a fracture pattern. A quick visual inspection is all that is needed to determine if the flyer velocity exceeded the threshold value. Sub-threshold velocities produce a substantially different appearance.

Brigham, William P.↗
NASA NTRS1996

Investigation of Passive Atmospheric Sounding Using Millimeter- and Submillimeter- Wavelength Channels

This report summarizes progress made during the period from July 1, 1994 through June 30, 1996 on the development of satellite-based observational techniques for high resolution imaging of precipitation and sounding of atmospheric ice and water vapor using passive microwave radiometers in the millimeter (MMW)- and submillimeter (SMMW)-wavelength. This is being achieved by radiative transfer modeling a millimeter and submillimeter wave frequencies and by the development and operation of an airborne millimeter wave imaging radiometer (MIR). The MIR has been used in both airborne and ground-based experiments. Its primary application is to provide calibrated radiometric imagery to verify MMW and SMMW radiative transfer models in clear air, cloud, and precipitation and to develop retrieval techniques using MMW and SMMW channels. The MIR imagery over convective storm cells has been used to illustrate the potentially useful cloud and water vapor sensing and storm-cell mapping capabilities of SMMW channels. The radiometric data has also been used to analyze radiative transfer model discrepancies caused by water vapor errors in radiosondes. The MMW and SMMW channels can be used to extend the altitude that water vapor sounding can be performed up into the lower stratosphere. Together, the use of both SMMW and MMW channels are expected to provide additional observational degrees of freedom related to cloud ice particle size.

Gasiewski, Albin J.↗
NASA NTRS1996

Robust Stabilization of a Class of passive Nonlinear Systems

The problem of feedback stabilization is considered for a class of nonlinear, finite dimensional, time invariant passive systems that are affine in control. Using extensions of the Kalman-Yakubovch lemma, it is shown that such systems can be stabilized by a class of finite demensional, linear, time-invariant controllers which are strictly positive real in the weak or marginal sense. The stability holds regardless of model uncertainties, and is therefore, robust.

Joshi, Suresh M.↗
NASA NTRS1996

Estimating the Thickness of Sea Ice Snow Cover in the Weddell Sea from Passive Microwave Brightness Temperatures

Passive microwave satellite observations have frequently been used to observe changes in sea ice cover and concentration. Comiso et al. showed that there may also be a direct relationship between the thickness of snow cover (h(sub s)) on ice and microwave emissivity at 90 GHz. Because the in situ experiment of experiment of Comiso et al. was limited to a single station, the relationship is re-examined in this paper in a more general context and using more extensive in situ microwave observations and measurements of h from the Weddell Sea 1986 and 1989 winter cruises. Good relationships were found to exist between h(sub s) sand the emissivity at 90 GHz - 10 GHz and the emissivity at 90 GHz - 18.7 GHz when the standard deviation of h(sub s) was less than 50% of the mean and when h(sub s) was less than 0.25 m. The reliance of these relationships on h(sub s) is most likely caused by the limited penetration through the snow of radiation at 90 GHz. When the algorithm was applied to the Special Sensor Microwave/Imager (SSM/I) satellite data from the Weddell Sea, the resulting mean h(sub s) agreed within 5% of the mean calculated from greater than 1400 in situ observations.

Arrigo, K. R.↗
NASA NTRS1997

Virtual Passive Controller for Robot Systems Using Joint Torque Sensors

This paper presents a control method based on virtual passive dynamic control that will stabilize a robot manipulator using joint torque sensors and a simple joint model. The method does not require joint position or velocity feedback for stabilization. The proposed control method is stable in the sense of Lyaponov. The control method was implemented on several joints of a laboratory robot. The controller showed good stability robustness to system parameter error and to the exclusion of nonlinear dynamic effects on the joints. The controller enhanced position tracking performance and, in the absence of position control, dissipated joint energy.

Aldridge, Hal A.↗