Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecule”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Integrated photonic molecule Brillouin laser with a high-power sub-100-mHz fundamental linewidth

Photonic integrated lasers with an ultra-low fundamental linewidth and a high output power are important for precision atomic and quantum applications, high-capacity communications, and fiber sensing, yet wafer-scale solutions have remained elusive. Here we report an integrated stimulated Brillouin laser (SBL), based on a photonic molecule coupled resonator design, that achieves a sub-100-mHz fundamental linewidth with greater than 10-mW output power in the C band, fabricated on a 200-mm silicon nitride (Si 3 N 4 ) CMOS-foundry compatible wafer-scale platform. The photonic molecule design is used to suppress the second-order Stokes (S2) emission, allowing the primary lasing mode to increase with the pump power without phase noise feedback from higher Stokes orders. The nested waveguide resonators have a 184 million intrinsic and 92 million loaded Q, over an order of magnitude improvement over prior photonic molecules, enabling precision resonance splitting of 198 MHz at the S2 frequency. We demonstrate S2-suppressed single-mode SBL with a minimum fundamental linewidth of 71±18 mHz, corresponding to a 23±6-mHz 2 /Hz white-frequency-noise floor, over an order of magnitude lower than prior integrated SBLs, with an ∼11-mW output power and 2.3-mW threshold power. The frequency noise reaches the resonator-intrinsic thermo-refractive noise from 2-kHz to 1-MHz offset. The laser phase noise reaches −155 dBc/Hz at 10-MHz offset. The performance of this chip-scale SBL shows promise not only to improve the reliability and reduce size and cost but also to enable new precision experiments that require the high-speed manipulation, control, and interrogation of atoms and qubits. Realization in the silicon nitride ultra-low loss platform is adaptable to a wide range of wavelengths from the visible to infrared and enables integration with other components for systems-on-chip solutions for a wide range of precision scientific and engineering applications including quantum sensing, gravitometers, atom interferometers, precision metrology, optical atomic clocks, and ultra-low noise microwave generation.

Liu, Kaikai (ORCID:0000000213609646)↗

Quantitative comparison between sub-millisecond time resolution single-molecule FRET measurements and 10-second molecular simulations of a biosensor protein

Molecular Dynamics (MD) simulations seek to provide atomic-level insights into conformationally dynamic biological systems at experimentally relevant time resolutions, such as those afforded by single-molecule fluorescence measurements. However, limitations in the time scales of MD simulations and the time resolution of single-molecule measurements have challenged efforts to obtain overlapping temporal regimes required for close quantitative comparisons. Achieving such overlap has the potential to provide novel theories, hypotheses, and interpretations that can inform idealized experimental designs that maximize the detection of the desired reaction coordinate. Here, we report MD simulations at time scales overlapping with in vitro single-molecule Förster (fluorescence) resonance energy transfer (smFRET) measurements of the amino acid binding protein LIV-BP SS at sub-millisecond resolution. Computationally efficient all-atom structure-based simulations, calibrated against explicit solvent simulations, were employed for sampling multiple cycles of LIV-BP SS clamshell-like conformational changes on the time scale of seconds, examining the relationship between these events and those observed by smFRET. The MD simulations agree with the smFRET measurements and provide valuable information on local dynamics of fluorophores at their sites of attachment on LIV-BP SS and the correlations between fluorophore motions and large-scale conformational changes between LIV-BP SS domains. We further utilize the MD simulations to inform the interpretation of smFRET data, including Förster radius (R 0 ) and fluorophore orientation factor (κ 2 ) determinations. The approach we describe can be readily extended to distinct biochemical systems, allowing for the interpretation of any FRET system conjugated to protein or ribonucleoprotein complexes, including those with more conformational processes, as well as those implementing multi-color smFRET.

59 BASIC BIOLOGICAL SCIENCES↗

Tetraspanins CD81 and CD82 Facilitate α4β1-Mediated Adhesion of Human Erythroblasts to Vascular Cell Adhesion Molecule-1

The proliferation and terminal differentiation of erythroid progenitors occurs in human bone marrow within erythroblastic islands, specialised structures consisting of a central macrophage surrounded by developing erythroid cells. Many cell-cell and cell-matrix adhesive interactions maintain and regulate the co-ordinated daily production of reticulocytes. Erythroid cells express only one integrin, α4β1, throughout differentiation, and its interactions with both macrophage Vascular Cell Adhesion Molecule-1 and with extracellular matrix fibronectin are critical for erythropoiesis. We observed that proerythroblasts expressed a broad tetraspanin phenotype, and investigated whether any tetraspanin could modulate integrin function. A specific association between α4βb1 and CD81, CD82 and CD151 was demonstrated by confocal microscopy and co-immune precipitation. We observed that antibodies to CD81 and CD82 augmented adhesion of proerythroblasts to Vascular Cell Adhesion Molecule-1 but not to the fibronectin spliceoforms FnIII 12-IIICS-15 and FnIII 12–15 . In contrast, different anti-CD151 antibodies augmented or inhibited adhesion of proerythroblasts to Vascular Cell Adhesion Molecule-1 and the fibronectin spliceoform FnIII 12-IIICS-15 but not to FnIII 12–15 . These results strongly suggest that tetraspanins have a functional role in terminal erythropoiesis by modulating interactions of erythroblast α4β1 with both macrophages and extracellular matrix.

59 BASIC BIOLOGICAL SCIENCES↗

Embarras de richesses – It is not good to be too anomalous: Accurate structure of selenourea, a chiral crystal of planar molecules

Selenourea, SeC(NH 2 ) 2 , recently found an application as a derivatization reagent providing a significant anomalous diffraction signal used for phasing macromolecular crystal structures. The crystal structure of selenourea itself was solved about 50 years ago, from data recorded on films and evaluated by eye and refined to R = 0.15 with errors of bond lengths and angles about 0.1 Å and 6°. In the current work this structure is re-evaluated on the basis of synchrotron data and refined to R1 = 0.021 with bond and angle errors about 0.007 Å and 0.5°. The nine planar molecules of selenourea pack either in the P3 1 or in the P3 2 unit cell. All unique molecules are connected by a complex network of Se•••H-N hydrogen bonds and Se•••Se contacts. The packing of selenourea molecules is highly pseudosymmetric, approximating either of the P3 1(2) 12, R3, and R32 space groups. Because the overwhelming majority of diffracted X-ray intensity originates form the anomalously scattering selenium atoms, the measurable anomalous Bijvoet differences are diminished and it was not possible to solve this crystal structure based on the anomalous signal alone.

36 MATERIALS SCIENCE↗

Water Molecules in Short- and Long-Distance Proton Transfer Steps of Bacteriorhodopsin Proton Pumping

The proton pumping cycle of bacteriorhodopsin consists of five consecutive proton transfer steps in which water molecules are likely to play critical roles. The role of water molecules in bacteriorhodopsin function is reviewed, with emphasis on computations of the retinal Schiff base deprotonation reaction and the open questions regarding the participation of water molecules in the longer-distance proton transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Matrix Infrared Spectroscopic and Computational Investigations of Novel Small Uranium Containing Molecules - Final Technical Report

Direct reactions of f-element uranium, thorium and lanthanide metal atoms were investigated with small molecules. These metal atoms were generated by laser ablation and mixed with the reagent molecules then condensed with noble gases at 4K. The products were analyzed by absorption of infrared light to measure vibrational frequencies which were confirmed by quantum chemical calculations. We have learned more about the reactivity of uranium atoms with common molecules, which will aid in the develolpment of further applications of uranium.

Andrews, Lester↗

Protein Scaffolding for Small Molecule Catalysts

We aim to design hybrid catalysts for energy production and storage that combine the high specificity, affinity, and tunability of proteins with the potent chemical reactivities of small organometallic molecules. The widely used Rosetta and RosettaDesign methodologies will be extended to model novel protein / small molecule catalysts in which one or many small molecule active centers are supported and coordinated by protein scaffolding. The promise of such hybrid molecular systems will be demonstrated with the nickel-phosphine hydrogenase of DuBois et. al.We will enhance the hydrogenase activity of the catalyst by designing protein scaffolds that incorporate proton relays and systematically modulate the local environment of the catalyticcenter. In collaboration with DuBois and Shaw, the designs will be experimentally synthesized and characterized.

25 ENERGY STORAGE↗

Ultrafast electron diffraction from aligned molecules

The aim of this project was to record time-resolved electron diffraction patterns of aligned molecules and to reconstruct the 3D molecular structure. The molecules are aligned non-adiabatically using a femtosecond laser pulse. A femtosecond electron pulse then records a diffraction pattern while the molecules are aligned. The diffraction patterns are then be processed to obtain the molecular structure.

74 ATOMIC AND MOLECULAR PHYSICS↗

Unraveling the physics of nanofluidic phenomena at the single-molecule level

Despite groundbreaking potential in a broad application space, several nanofluidic phenomena remain poorly understood. Toward advancing the understanding of fluid behavior under nanoscale confinement, we developed a novel, ideal platform for fundamental molecular transport studies, in which the fluidic channel is a single carbon nanotube (CNT). CNTs offer the advantage of simple chemistry and structure, which can be synthetically tuned with nanometer precision and accurately modeled. With combined experimental and computational approaches, we demonstrated that CNT pores with 1-5 nm diameters conduct giant ionic currents that follow an unusual sublinear electrolyte concentration dependence. The large magnitude of the ionic conductance appears to originate from a strong electro-osmotic flow in smooth CNT pores. First-principle simulations suggest that electro-osmotic flow arises from localized negative polarization charges on carbon atoms near a potassium (K + ) ion and from the strong cation-graphitic wall interactions, which drive K + ions much closer to the wall than chlorides (Cl - ). Single-molecule translocation studies reveal that charged molecules may be distinguished from neutral species on the basis of the sign of the transient current change during their passage through the nanopore. Together with shedding light on a few controversial questions in the CNT nanofluidics area, these results may benefit LLNL’s Security Mission by providing the foundation for the development of advanced single-molecule detection system for bio/chem/explosive analytes. In addition, these experimental and computational platforms can be applied to advance fundamental knowledge in other fields, from energy storage and membrane separation to superfluid physics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Harnessing the power of ab initio calculations, distributed computing and machine learning to efficiently locate extreme molecules for use in carbon-based solar cells (Final Technical Report)

The use of high-throughput virtual screening (HTVS) tools is a powerful tool to expedite the materials discovery of commercially relevant materials. In previous years, our group has developed a molecular discovery platform to generate libraries in order to obtain suitable candidates for different applications, starting from the Harvard Clean Energy Project. This platform is suitable to test in-silico on traditional supercomputing clusters and shared resources, for example, in the IBM World Community Grid. In this project, we used the molecular discovery platform to create and screen a library of candidates of organic photovoltaic (OPVs) molecules. Based on a set of candidates created with combinations of molecular moieties, we were able to filter, by conformation stability, the energy of electronic orbitals and approximated power conversion efficiencies (PCE). To improve the predictions of orbital energies calculated and the PCEs, we used Gaussian Process regression and two sets of molecules. These sets correspond to electronic structure calculations of a higher level of theory and experimental PCE values, respectively. Finally, we selected a subset of the best candidates (molecules with a PCE higher than 10%) to understand its absorbance properties with TD-DFT. This project has demonstrated the capabilities of our molecular discovery platform for HTVS. Finally, machine learning can help us to introduce more complex effects included in bulk conditions and computational intensive calculations on models.

14 SOLAR ENERGY↗

Atomic Force Microscope Active Optical Probe for Single-Molecule Imaging and Time-Resolved Optical Spectroscopy (DOE SBIR Phase II/IIA Final Report)

Actoprobe LLC reports on the results of its DOE SBIR Phase II/IIA project on the development of Atomic Force Microscope Active Optical Probe for Single-Molecule Imaging and Time-Resolved Optical Spectroscopy. While chemistry science and technology greatly benefit from Atomic Force Microscopy in surface characterization, time-resolved chemical imaging on the single-molecule level lags far behind. Current scanning probe microscopy only obtains information about mechanical but not optical/chemical properties. To address this problem, the Actoprobe LLC research team has proposed a novel class of Atomic Force Microscopy probes, Ultra-Fast Pulsed Active Atomic Force Microscopy Optical Probes (UFP AAOPs), that will allow ultrafast time-resolved optical and chemical imaging at the nanoscale. As envisioned, these unique optical probes will perform the functions of conventional Atomic Force Microscopy probes and, in addition, will simultaneously provide chemical information about molecular scale interactions. This innovation is accomplished by integrating an ultrafast pulsed Quantum Dot laser source into an Atomic Force Microscopy probe. This report describes our progress with the fabrication of an ultrafast micrometer-size semiconductor laser, based on “artificial atoms” - Quantum Dots, integrated with an Atomic Force Microscopy probe. In this Phase II/IIA project, we have demonstrated the feasibility of the UFP AAOP concept by fabricating a first prototype of the UFP AAOP. The excellent performance of the probe has been proven in terms of AFM and optical spatial resolution through rigorous tests. The UFP AAOP provides pulses with less than 4 ps duration and higher than 11 GHz repetition rate, and spatial resolution better than 300 nm at 1240 nm wavelength. Technically, it is possible to reduce the pulse width to less than 1 ps and to improve lateral resolution to ~ 0.5 nm, which implies the potential capability for the probe to characterize chemical compounds with single-molecule resolution. The UFP AAOP fabrication procedure has been developed for wafer-scale production of multiple devices, with the yield of the process estimated to be lower than 1% with the limited fabrication capabilities and equipment available for use in the research project. However, using high-volume production tools and special GaAs processing equipment, the yield can be significantly improved, theoretically to ~ 50%. Finally, economic feasibility and scale-up manufacturing potential were analyzed for UFP AAOP and found to be very promising. In summary, the Actoprobe team has successfully demonstrated the feasibility of the UFP AAOP concept.

36 MATERIALS SCIENCE↗

Molecules Functionalized with Cycling Centers for Quantum Information Science

The ability for a single molecule to produce enough laser-induced fluorescence to control and detect its quantum state is known as optical cycling. This property has been used to great effect in atoms, where the relatively small number of states promotes their ability to repeatedly fluoresce, for applications such as laser cooling, precision measurement, atomic clocks, and quantum information processing. The extension of this capability to molecular species, however, has been difficult, primarily due to their propensity to become vibrationally excited during illumination. This project brought together experts from atomic physics, physical chemistry, and computational quantum chemistry to develop means to create molecules capable of optical cycling. In particular, this program sought to produce an optical cycling center (OCC), a quantum functional group capable of chemical attachment to a wide variety of molecular hosts while retaining (and thereby furnishing to its host) the ability to optically cycle. Following our team’s theoretical identification of promising species, including alkaline-earth phenoxides, we then created these species and in many cases confirmed their optical cycle closure. We now not only know of the existence of a handful of large, molecular species that can be deployed for applications in quantum technologies and measurement, but have improved our knowledge of the molecular mechanisms leading to this discovery, which will enable generalization in the future. The extension of these ideas for informed chemical design of cycling molecules with bespoke properties is now being pursued by multiple groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalyst design for small molecule activation of energy consequence

This project targets the conversion of ubiquitous small molecules (e.g. NO, CO, H 2 O) into viable precursors to synthetic fuels. Current state of the art catalyst design has not directly targeted transition metal complexes capable of mediating the multi-electron redox processes necessary to reduce the overpotential (energy loss) required achieve efficient activation of small molecule substrates. In this vein, a new strategy has been developed for the assembly of polynuclear architectures; allowing for the construction of tunable polymetallic centers that assemble easily within a pre-organized template (conferring stability, selectivity and tunability) that can effect multi-electron redox processes for reactions. Catalyst development has commenced with the following target design elements: (1) catalysts featuring multiple transition metal ions in the same reaction space to greatly expand accessible molecular redox capabilities; (2) catalysts are assembled in a polynucleating ligand framework that permits control over the cluster morphology as well as the local steric and electronic environment of the transition metal ions within the cluster. The high-tunability of the catalyst composition (metal content) and geometric flexibility has permitted a rigorous assessment of electronic-structure-to-function relationship to be developed, further guiding synthetic efforts to realize more potent catalysts. The numerous permutations possible showcase the high degree of generality to this approach with many synthetic handles to tune redox and reaction chemistry. Trinuclear complexes have been synthesized featuring homo- and hetero-trinuclear cores featuring a variety of first row transition metal ions (Cr→Ni). The molecular clusters have been shown to successfully mediate multi-electron redox processes in a cooperative fashion without requiring strong chemical reductants or oxidants. The reactive molecular complexes are being utilized to activate and breakdown the robust bonds within typical waste stream small molecules (e.g., greenhouse gases) and convert them into value-added commodity chemicals. Ultimately, the catalysts developed by this approach will be required to convert energy acquired via renewable resources (e.g., solar or wind) into synthetic fuels as an energy storage mechanism.

10 SYNTHETIC FUELS↗

LITE-SM: A Light Sheet Illuminator Compatible with Super Resolution and Single Molecule Imaging

The LITE-SM (hereinafter referred to as the Tilt-SM) is a light sheet illumination system purpose-built for single molecule (SM) imaging. SM imaging is a fluorescence imaging technique where individual molecules can be tracked in living cells/tissues in real time allowing for unprecedented insights into the intracellular dynamics of these molecules. The innovative all-mirror optical design greatly reduces/eliminates the aberrations that plague lens-based designs. This iteration of the Tilt-SM has significantly better optical performance then its predecessor with over 10x increase in optical power at the sample, allowing for the use of much smaller and more cost-effective lasers then the original Phase 1 system. Excellent STORM imaging as well as SM tracking has been achieved, satisfying the key objectives of this study.

59 BASIC BIOLOGICAL SCIENCES↗

Towards efficient light emitters via computational design of molecules with inverted singlet-triplet gaps

To move toward rational design of efficient organic light emitting diodes based on the radical idea of inverted singlet-triplet gap (INVEST) systems, we propose a set of novel quantum chemical approaches, predictive but low-cost, to unveil a set of structural-property relationships. We perform a computational study of a series of substituted molecules based on a small set of known INVEST molecules. Our study demonstrates a high degree of correlation between the intramolecular charge transfer and the singlet-triplet energy gap and hints towards the use of a quantitative estimate of charge transfer to predict and modulate these energy gaps. We aim to create a database of INVEST molecules that includes accurate benchmarks of singlet-triplet energy gaps. Furthermore, we aim to link structural features and molecular properties, enabling a control knob for rational design.

42 ENGINEERING↗

Assessing Ground State Energy of Molecules and Energy Profile of the NH3 Capturing CO2 System Using the Quantum Computing Algorithms

Molecule size correlates with the number of electrons on electronic energies and strength of anharmonicity on vibrational properties, however, it is challenging to address using classical computing. In this study, variational quantum eigensolver (VQE) algorithm was implemented on a quantum simulator to quantify electronic and vibrational energies and reaction pathways of CO2 + NH3 = NH2COOH. The VQE-based Hartree-Fock-Embedding algorithm was adopted to benchmark electronic energies for a series of molecules (doi.org/10.1063/5.0188249) and quantify the reaction energy profile of the CO2 capture reaction (doi.org/10.1116/5.0137750). The generated reaction profile is in good agreement with the classical high-level Coupled-Cluster-Singles-and-Doubles (CCSD) results. The quantum computing algorithm also helps enhance the calculation of vibrational ground-state energies by considering the many-body coupling using the Vibrational Self-Consistent Field method, providing results for CO2 and NH3 molecules with accuracy comparable to the direct diagonalization method. Our approach indicates quantum computing can be applied to solve practical problems.

Lee, Yueh-Lin↗

Theoretical Treatment of the Thermophysical Properties of Fluids Containing Chain-like Molecules

This research program was designed to enhance our understanding of the behavior of fluids and fluid mixtures containing chain-like molecules. The original objective was to explain and predict the experimentally observed thermophysical properties, including phase equilibria and dynamics, of systems containing long flexible molecules ranging in length from alkanes to polymers. Over the years the objectives were expanded to include the treatment of molecules that were not chain-like. Molecular dynamics and Monte Carlo computer simulations were used to investigate how variations in molecular size, shape and architecture influence the types of phase equilibria, thermodynamic properties, structure and surface interactions that are observed experimentally. The molecular insights and theories resulting from this program could eventually serve as the foundation upon which to build correlations of the properties of fluids that are both directly and indirectly related to the Nation’s energy resources including: petroleum, natural gas, and polymer solutions, melts, blends, and materials.

02 PETROLEUM↗

Inner-shell electron spectroscopy and chemical properties of atoms and small molecules

The program has been concerned with gas-phase carbon 1s photoelectron spectroscopy of a number of molecules of potential chemical interest. The primary goals have been to determine carbon 1s ionization energies with a view of relating these to other chemical properties such as electronegativity, acidity, basicity, and reactivity, in order to provide a better understanding of these fundamental properties. The role of electron-donating (methyl) and electron-withdrawing (fluoro) substituents on the carbon 1s ionization energies of substituted benzenes has been studied., and these results have been related to measurements of the reactivities of the same molecule as well as to their affinities for protons (basicity). Opportunities for investigation in unplanned areas have arisen, and the program has been modified to take advantage of these. One has been the realization that, under certain circumstances, inner-shell ionization energies may depend on the molecular conformation. Several examples of this phenomenon have been investigated and it has been shown that this technique provides a tool for the measurement of the energy differences between different conformers of the same substance. The other has been the demonstration that photoelectron recoil can lead to the excitation of vibrational modes that are forbidden in the normal view of photoemission and to rotational heating of the molecule that increases with the energy of the exciting radiation.

74 ATOMIC AND MOLECULAR PHYSICS↗