Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Cutting force and stability prediction for inserted cutters

Here, this paper presents an approach for inserted end/face mill force and stability predictions using a reverse engineering approach. Structured light scanning is implemented to identify the spatial coordinates of the points that define the multiple insert cutting edges. These points are analyzed to extract the cutting edge radius and angle values, which are then incorporated in a time domain simulation that predicts cutting force and tool/workpiece deflection for user-selected operating parameters. Good agreement between predicted and measured cutting forces is first demonstrated. The process stability is then predicted using the validated force model and measured structural dynamics. Observations about the stability dependence on insert geometry are finally presented for a selected end mill.

Machining↗

Estimating manufacturing electricity costs by simulating dependence between production parameters

The electricity costs associated with manufacturing generally consist of an energy charge and a demand charge, which are calculated by total kWh × kWh and peak kW × kW, respectively. While these two charges have been extensively studied with production scheduling, dependence between production parameters has not been thoroughly investigated for production energy costs when the production parameters are assumed to be independent. Such dependence, however, can significantly affect the peak kW and resulting energy costs. Therefore, industrial practitioners need a tool to simulate the production power demand and cost to evaluate energy costs for each production plan and for any dependence in the parameters. In this paper, we propose a method for simulating the power demand at the machine and facility levels, focusing on the dependence in milling machine parameters. Using probabilistic techniques with copulas, we quantify the degree of dependence between two milling parameters (processing times and processing amounts) and build a power demand simulator combining discrete event simulation and numerical simulation models. From 35 illustrative examples, we show that a production strategy to adjust dependence can reduce the peak kW and energy costs by more than 15% and 4%, respectively. In addition to dependence, less variability in processing times results in less peak kW and energy costs. Other factors such as a marginal probability distribution and copula types having the same degree of variability have been found to have limited effects on reducing energy costs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Kinks, chains, and loop groups in the CP{sup n} sigma models

We consider topological solitons in the CP{sup n} sigma models in two space dimensions. In particular, we study 'kinks', which are independent of one coordinate up to a rotation of the target space, and 'chains', which are periodic in one coordinate up to a rotation of the target space. Kinks and chains both exhibit constituents, similar to monopoles and calorons in SU(n) Yang-Mills-Higgs and Yang-Mills theories. We examine the constituent structure using Lie algebras.

97 MATHEMATICS AND COMPUTING↗

New four-dimensional integrals by Mellin-Barnes transform

This paper is devoted to the calculation of a special class of integrals by Mellin-Barnes transform. It contains double integrals in the position space in d=4-2{epsilon} dimensions, where {epsilon} is parameter of dimensional regularization. These integrals contribute to the effective action of the N=4 supersymmetric Yang-Mills theory. The integrand is a fraction in which the numerator is the logarithm of the ratio of space-time intervals, and the denominator is the product of powers of space-time intervals. According to the method developed in the previous papers, in order to make use of the uniqueness technique for one of two integrations, we shift exponents in powers in the denominator of integrands by some multiples of {epsilon}. As the next step, the second integration in the position space is done by Mellin-Barnes transform. For normalizing procedure, we reproduce first the known result obtained earlier by Gegenbauer polynomial technique. Then, we make another shift of exponents in powers in the denominator to create the logarithm in the numerator as the derivative with respect to the shift parameter {delta}. We show that the technique of work with the contour of the integral modified in this way by using Mellin-Barnes transform repeats the technique of work with the contour of the integral without such a modification. In particular, all the operations with a shift of contour of integration over complex variables of twofold Mellin-Barnes transform are the same as before the {delta} modification of indices, and even the poles of residues coincide. This confirms the observation made in the previous papers that in the position space all the Green's function of N=4 supersymmetric Yang-Mills theory can be expressed in terms of Usyukina-Davydychev functions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Warped Cosmic String

We present a cosmic string solution in Einstein-Yang-Mills Gauss-Bonnet theory on a warped 5 dimensional space-time conform the Randall-Sundrum-2 theory. In a simplipied model, we find an exact solutions with exponential decreasing or periodic warp function. In a more general setting, where the metric- and Yang-Mills components depend on both scales and one of the YM components resides in the bulk, we find a time dependent numerical solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Confinement and deconfinement for any gauge group from dyons viewpoint

Basing on a semiclassical picture of dyons, we present a nonperturbative model of a pure Yang-Mills theory at any temperatures, for an arbitrary simple gauge group. We argue that at low temperatures dyons drive the Yang-Mills system for all groups to a phase where the 'eigenphases' of the Polyakov line are, as a vector, proportional to the Weyl vector being the half sum of positive roots. For most gauge groups it means confinement, in particular for 'quarks' in any N-ality nonzero representation of the SU(N) gauge group. At a critical temperature there is a 1st order phase transition for all groups (except SU(2) where the transition is 2nd order), characterized by a jump of Polyakov lines, irrespectively of whether the gauge group has a nontrivial center, or not.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TEM and Moessbauer Study of Nano Sized Fe{sub 2}MnAl Flakes

Magnetic and structural properties of L21 ordered Fe{sub 2}MnAl Heusler alloy have been studied by X-ray diffraction, Transmission electron microscopy (TEM), Moessbauer spectroscopy and DC magnetization. Structural texturing induced by ball milling is destroyed on heating while Moessbauer and DC magnetization studies show magnetic texturing persists after thermal treatment. TEM shows large distribution in particle size with an average size of 27 nm. Thermal annealing of ball milled sample results L2{sub 1} ordering and the needle shaped particle contributes spin texturing.

36 MATERIALS SCIENCE↗

Atomic-scale effects behind structural instabilities in Si lamellae during ion beam thinning

The rise of nanotechnology has created an ever-increasing need to probe structures on the atomic scale, to which transmission electron microscopy has largely been the answer. Currently, the only way to efficiently thin arbitrary bulk samples into thin lamellae in preparation for this technique is to use a focused ion beam (FIB). Unfortunately, the established FIB thinning method is limited to producing samples of thickness above {approx}20 nm. Using atomistic simulations alongside experiments, we show that this is due to effects from finite ion beam sharpness at low milling energies combined with atomic-scale effects at high energies which lead to shrinkage of the lamella. Specifically, we show that attaining thickness below 26 nm using a milling energy of 30 keV is fundamentally prevented by atomistic effects at the top edge of the lamella. Our results also explain the success of a recently proposed alternative FIB thinning method, which is free of the limitations of the conventional approach due to the absence of these physical processes.

36 MATERIALS SCIENCE↗

The use of amorphous boron powder enhances mechanical alloying in soft magnetic FeNbB alloy: A magnetic study

Saturation magnetization and magnetic anisotropy have been studied during mechanical alloying of Fe{sub 75}Nb{sub 10}B{sub 15} alloys prepared using crystalline and commercial amorphous boron. The evolution of saturation magnetization indicates a more efficient dissolution of boron into the matrix using amorphous boron, particularly for short milling times. The magnetization of the crystalline phase increases as boron is incorporated into this phase. Two milling time regimes can be used to describe the evolution of magnetic anisotropy: a first regime governed by microstrains and a second one mainly governed by crystal size and amorphous fraction.

36 MATERIALS SCIENCE↗

Grain size softening effect in Al{sub 62.5}Cu{sub 25}Fe{sub 12.5} nanoquasicrystals

Inverse Hall-Petch (IHP) behavior in nano-quasicrystalline Al{sub 62.5}Cu{sub 25}Fe{sub 12.5} is reported. Powders with varying grain sizes were produced by mechanical milling of spray-formed quasicrystals. The hardness of the milled powders increased with decreasing grain size down to about 40 nm and decreased with further refinement, demonstrating the IHP behavior. This critical grain size was found to be larger compared to other metallic nanocrystalline alloys. This IHP behaviour has been attributed to the structural complexity in quasicrystals and to thermally activated shearing events of atoms at the grain boundaries.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Sm{sub 2}Fe{sub 17}N{sub x} nanoflakes prepared by surfactant assisted cryomilling

Hard magnetic Sm{sub 2}Fe{sub 17}N{sub x} nanoflakes were prepared by surfactant assisted ball milling (SABM) at low temperature using liquid nitrogen cooling (surfactant assisted cryomilling). 2-methyl pentane was used as a milling medium and oleylamine as a surfactant. The morphology, structure, and magnetic properties of Sm{sub 2}Fe{sub 17}N{sub x} were investigated using scanning electron microscopy, X-ray diffraction, and vibrating sample magnetometer, respectively. By comparing Sm{sub 2}Fe{sub 17}N{sub x} nanoflakes produced by SABM at low temperature and at room temperature, we found that the former has many interesting features: more homogeneous morphology, smaller size, especially markedly increased remanent magnetization (M{sub r}), saturation magnetization (M{sub s}), and remanent magnetization ratio (M{sub r}/M{sub s}). These Sm{sub 2}Fe{sub 17}N{sub x} nanoflakes have great potential to be used for preparing high performance bonded permanent magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coexistence of considerable inter-particle interactions and spin-glass behavior in La{sub 0.7}Ca{sub 0.3}MnO{sub 3} nanoparticles

We have studied the magnetic and spin-glass (SG) properties of La{sub 0.7}Ca{sub 0.3}MnO{sub 3} single-crystalline nanoparticles, which were prepared by the mechanical milling method with different milling times (t{sub m}). Analyzing the susceptibility data in the paramagnetic region indicates both ferromagnetic (FM) and anti-FM interactions coexisting in nanoparticles. Additionally, there is a peak associated with the freezing temperature (T{sub f}) appearing on the real part curve of the ac susceptibility, χ′(T). The T{sub f} value increases with increasing frequency as expected for SG systems. The SG behavior was also checked by using the criterion parameter c = ΔT{sub f}/T{sub f}Δ(log{sub 10}f), and the power law τ = τ{sub 0}(T/T{sub g} − 1){sup −zν}. The obtained values of c ≈ 5 × 10{sup −2}, τ{sub 0} ≈ 10{sup −5} s and zν ≈ 2–3 are consistent with those expected for SG-like systems, suggesting an existence of a SG phase transition at T{sub g} below T{sub f}, which decreases with decreasing 〈D〉. Basing on ln(f) versus T{sub f} data, and the Néel-Arrhenius model [ln(f) = ln(f{sub 0}) - E{sub a}/k{sub B}T] and Vogel–Fulcher law [ln(f) = ln(f{sub 0}) - E{sub a}/k{sub B}(T - T{sub 0})], the Larmor frequency (f{sub 0}), activation energy (E{sub a}) and effective temperature (T{sub 0}) for the samples with different 〈D〉 were determined. Obtained results indicate the existence a strong interaction between nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Change in atomic coordination in a heavily deformed metallic glass

The local structure around Ni and La atoms in Al{sub 85}Ni{sub 10}La{sub 5} amorphous powder after ball milling was investigated by X-ray absorption spectroscopy. A continuous decrease in coordination number of Ni and La as a function of milling time was observed, while the nearest neighbour distance and the mean square atomic displacement did not change, pointing at the creation of free volume around the Ni and La atoms. These structural changes resemble those of a liquid upon temperature increase. The results are described by a shear band model in which the coordination numbers of Ni and La are different within and outside a shear band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sequential injection of domain walls into ferroelectrics at different bias voltages: Paving the way for “domain wall memristors”

Simple meso-scale capacitor structures have been made by incorporating thin (∼300 nm) single crystal lamellae of KTiOPO{sub 4} (KTP) between two coplanar Pt electrodes. The influence that either patterned protrusions in the electrodes or focused ion beam milled holes in the KTP have on the nucleation of reverse domains during switching was mapped using piezoresponse force microscopy imaging. The objective was to assess whether or not variations in the magnitude of field enhancement at localised “hot-spots,” caused by such patterning, could be used to both control the exact locations and bias voltages at which nucleation events occurred. It was found that both the patterning of electrodes and the milling of various hole geometries into the KTP could allow controlled sequential injection of domain wall pairs at different bias voltages; this capability could have implications for the design and operation of domain wall electronic devices, such as memristors, in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of structural phase transformation in FeGaO{sub 3} on its magnetic and ferroelectric properties

We investigate the structural phase transformation from orthorhombic to rhombohedral structure in FeGaO{sub 3} by adopting a combined effect of mechanical alloying/milling and solid state sintering techniques. The structural phase formation of the FeGaO{sub 3} compound has been characterized by X-ray diffraction pattern. Mechanical milling played a significant role on the stabilization of rhombohedral phase in FeGaO{sub 3}, where as high temperature sintering stabilized the system in orthorhombic phase. A considerable difference has been observed in magnetic and ferroelectric properties of the system in two phases. The system in rhombohedral (R-3c) phase exhibited better ferromagnetic and of ferroelectric properties at room temperature in comparison to orthorhombic (Pc2{sub 1}n) phase. The rhombohedral phase appears to be good for developing metal doped hematite system for spintronics applications and in that process mechanical milling played an important role.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of disorder on properties of non-conventionally prepared barium titanate

Barium titanaten (BaTiO{sub 3}) nanoparticles were prepared by non-conventional as well as conventional solid state reaction. A better response about the grain size distribution was obtained in the former. The former was then milled to get grains of successive reduced sizes. The defects induced within the samples were studies by positron annihilation spectroscopy. The effect of defects on dielectric property of sample with finest grains was measured. Dielectric stability with temperature was increased with decreasing grain size and the peak was shifted towards the lower value due to the enhancement of grain boundary defects generated due to milling for long time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The improvement in functional characteristics of eco-friendly composites made of natural rubber and cellulose

We investigated the efficient use of cellulose to resolve the problem of the depletion of fossil resources. In this study, as the biomass material, the green composite based on natural rubber (NR) and the flake-shaped cellulose particles (FSCP) was produced. In order to further improvement of functional characteristics, epoxidized natural rubber (ENR) was also used instead of NR. The FSCP were produced by mechanical milling in a planetary ball mill with a grinding aid as a cellulose aggregation inhibitor. Moreover, talc and mica particles were used to compare with FSCP. NR and ENR was mixed with vulcanizing agents and then each filler was added to NR compound in an internal mixer. The vulcanizing agents are as follows: stearic acid, zinc oxide, sulfur, and vulcanization accelerator. The functionalities of the composites were evaluated by a vibration-damping experiment and a gas permeability experiment. As a result, we found that FSCP filler has effects similar to (or more than) inorganic filler in vibration-damping and O{sub 2} barrier properties. And then, vibration- damping and O{sub 2} barrier properties of the composite including FSCP was increased with use of ENR. In particular, we found that ENR-50 composite containing 50 phr FSCP has three times as high vibration-damping property as ENR-50 without FSCP.

36 MATERIALS SCIENCE↗