Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interlayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Dynamic magnetic permeability of the heterogeneous nanosystems based on (Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x} composites

Thin films of (Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x} nanocomposites and hybrid nanocomposite–semiconductor [(Co{sub 41}Fe{sub 39}B{sub 20}){sub x}(SiO{sub 2}){sub 100–} {sub x}/C]{sub 50} multilayers are synthesized by ion-beam deposition at various contents x of ferromagnetic metallic Co{sub 41}Fe{sub 39}B{sub 2O} nanogranules in an SiO{sub 2} matrix and at various carbon layer thicknesses h < 2 nm. Their magnetic and electrical properties, high-frequency magnetic permeability, magnetooptical spectra, and FMR spectra are studied. It is found that both the single-layer nanocomposites and the multilayers with carbon interlayers are superparamagnetic at x < x{sub per}, where x{sub per} is the electric conduction percolation threshold: a hysteresis at room temperature is absent, and the blocking temperature determined in quasi-static measurements does not exceed 20–30 K and weakly depends on the carbon layer thickness. At a carbon layer thickness h = 1.2–1.8 nm, the real and imaginary parts of complex magnetic permeability at 50 MHz and room temperature are substantially higher than those of the nanocomposites without carbon layers: their values are typical of ferromagnets. This dependence points to an exchange interaction between nanogranules in layers through a carbon interlayer. The influence of a conducting layer on the static and dynamic magnetic properties of a system of interacting superparamagnetic particles is discussed.

36 MATERIALS SCIENCE↗

Charge Transfer between Layers in a Bilayer Quasi-Two-Dimensional (BEDT-TTF){sub 4}CoBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2}) Organic Metal

Based on the analysis of the behavior of the magnetoresistance, the regime of interlayer charge transport in a bilayer quasi-two-dimensional (BEDT-TTF){sub 4}CoBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2}) organic metal is discussed. It is noted that a strongly incoherent mode is the most likely in the entire temperature range 1.5–300 K. The metallic type of the temperature dependence of the interlayer resistance at low temperatures is most likely associated with charge transfer through resonant impurities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitons and Trions in Bilayer van der Waals Heterostructures

Excitons and trions in bilayer structures based on transition metal dichalcogenides are theoretically studied. Expressions for the effective potential of interparticle interaction in such a system with allowance for a significant dielectric contrast in the heterostructure are obtained. Simple and physically justified variational functions for electron–hole complexes are proposed. A variational calculation of the exciton and trion binding energies as functions of the interlayer distance, taking into account the specific features of the screening of the Coulomb interaction, is performed. The accuracy of the variational approach is confirmed by direct numerical calculation of the exciton binding energy as a function of the interlayer distance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical Performance and Stability of the Cathode for Solid Oxide Fuel Cells II. Role of Ni diffusion on LSM performance

The sintering of a standard (La 0.8 Sr 0.2 ) 0.98 MnO 3 (LSM-20) solid oxide fuel cell cathode composition (in the temperature range of 1050-1200ºC) on anode-supported cells utilizing a Ni-YSZ anode and thin YSZ electrolyte (<10 μm thickness) has revealed the need for a protective ceria interlayer to prevent a detrimental interaction between the YSZ and the LSM. The interaction, however, is not the typically assumed formation of insulating La- and/or Sr-zirconate, but rather the result of Ni diffusion from the anode through the YSZ electrolyte and into the LSM resulting in coarsening and increased densification of the LSM microstructure. As an alternative to the use of a protective ceria interlayer, the presence of YSZ in the cathode material was able to suppress coarsening of LSM, thereby significantly improving the electrochemical performance.

30 DIRECT ENERGY CONVERSION↗

Bismuth Enables the Formation of Disordered Birnessite in Rechargeable Alkaline Batteries

Recent advances in rechargeable Zn/MnO$_2$ alkaline batteries have shown promise for scalable energy storage systems which provide a safe, low-cost alternative with a demonstrated lifetime over thousands of cycles. This cathode technology is based on a 2-electron Mn redox process where a layered birnessite-type phase has been shown to form after the first cycle with excellent reversibility between the discharge product, Mn(OH)$_2$. Herein, we investigate the reversible reaction between birnessite and Mn(OH)$_2$ with and without a Bi$_2$O$_3$ additive using multimodal structural characterization techniques during active battery cycling. Diffraction results provide evidence of Bi$^{3+}$ residing in the interlayer of birnessite which prevents irreversible Mn$_3$O$_4$ formation by limiting Mn$^{3+}$ diffusion within the crystal lattice. Also, upon charge no MnOOH intermediate phases are observed. Instead, X-ray absorption and Raman spectroscopy indicate a disordered, non-crystalline birnessite-type phase consisting of mostly neutral H$_2$O within the interlayer. Birnessite phases will reform without Bi$_2$O$_3$ present, but Mn$_3$O$_4$ formation severely polarizes the potential they are formed at, leading to capacity fade. Also, we discuss the reversible Bi$_2$O$_3$ conversion to Bi$^0$ and its contribution to the observed capacity. We expect the results will provide crucial insight into the development of aqueous, rechargeable battery systems utilizing MnO 2 .

25 ENERGY STORAGE↗

Demonstration of Electrochemically-Driven CO 2 Separation Using Hydroxide Exchange Membranes

Hydroxide exchange membrane fuel cells (HEMFCs) are a potentially lower-cost hydrogen fuel cell technology; however, ambient levels of CO 2 in air significantly reduce HEMFCs’ performance. In this work, we demonstrate an electrochemically-driven CO 2 separator (EDCS) which can be used to remove ambient levels of CO 2 from air upstream of the HEMFC stack in fuel cell vehicles, protecting it from CO 2 -related performance losses. The EDCS operating window was explored for current density, anode flow, and cathode flow with respect to its impact on CO 2 separation performance. Additionally, gas-phase mass transport was improved by selecting flow fields and gas diffusion layers conducive to the EDCS operating regime. The use of a carbon-ionomer interlayer at the cathode was explored and improved CO 2 removal performance from 77.7% to 98.2% at 20 mA cm −2 . An analytical, 1-D model is used to explain the experimental observations and design improvements. A single-cell, 25 cm 2 EDCS using the aforementioned improved design demonstrated greater than 98% CO 2 removal at a cathode flow rate of 1300 sccm for 100 h with 2.7% hydrogen stack consumption.

Matz, Stephanie↗

SrZrO 3 Formation at the Interlayer/Electrolyte Interface during (La 1-x Sr x ) 1-δ Co 1-y Fe y O 3 Cathode Sintering

This work probes the formation of SrZrO 3 at the SDC/YSZ interface (Sm doped ceria, SDC; Y stabilized zirconia, YSZ) during (La 1-x Sr x ) 1-δ Co1 -y Fe y O 3 (LSCF) cathode sintering. SEM/EDS and grazing incidence X-ray diffraction results of annealed LSCF and YSZ samples reveal that even without physical contact between LSCF and YSZ, SrZrO 3 was formed on the surface of YSZ, preferentially at the grain boundaries. It was suspected that the SrZrO 3 formation is due to the Sr-containing gas species diffused through the pores of the SDC layer and reacted with the YSZ electrolyte. Computational thermodynamics was adopted to predict the gas species formed in air during sintering by using the La-Sr-Co-Fe-O-H thermodynamic database. Sr(OH) 2 is identified as the dominant Sr-containing gas species under the experimental conditions. In addition, it was found that A-site deficiency in LSCF could effectively suppress the SrZrO 3 formation while a dense and pore-free SDC interlayer is required to totally block the SrZrO 3 formation. As a result, cell performance was significantly improved for a cell with a dense SDC interlayer fabricated by pulsed laser deposition, due to elimination of SrZrO 3 formation and therefore reduced interfacial resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-Dependent Sheet and Contact Resistivity Measurements on Ag and Ag-Ni Circuit Pastes

The metal circuits and brazes used in electronic, energy conversion, and/or energy storage devices often have difficulty wetting and adhering to ceramic and/or ceramic-passivated metal substrates. Here, a novel Particle Interlayer Directed Wetting and Spreading (PIDWAS) technique is demonstrated that utilizes screen printing, the low wetting angle of silver on nickel, and the high work of adhesion between nickel and various ceramics to produce well-adhered, self-assembled silver patterns on ceramic and/or stainless-steel substrates not normally wet by silver. The resulting Ag-Ni circuits have higher sapphire adhesion strengths (up to 30 MPa on sapphire), higher densities (>97% on sapphire), and similar high-temperature electronic resistivities to those made using commercially-available Heraeus C8710 or DAD-87 silver circuit pastes. Similarly, Ag-Ni brazes between a variety of ceramic and/or stainless-steel substrates have better microstructural stability with rapid thermal cycling, reduction-oxidation cycling, and dual atmosphere isothermal aging than conventional Ag-CuO brazes. In addition, the residual Ni in these Ag-Ni circuits and brazes can be used to chemically getter surface segregated Al, ensuring low contact resistances on a variety of chromia- and/or alumina-passivated stainless steels. Reference: [1] Hu G, Zhou Q, Bhatlawande A, Park J, Termuhlen R, Ma Y, Bieler TR, Yu HC, Qi Y, Hogan T & Nicholas JD. Patterned Nickel Interlayers for Enhanced Silver Wetting, Spreading and Adhesion on Ceramic Substrates. Scripta Materialia, 2021; 196, 113767. 10.1016/j.scriptamat.2021.113767 [2] Park J, Phongpreecha T, Nicholas JD & Qi Y. Enhanced Liquid Metal Wetting on Oxide Surfaces via Patterned Particles. Acta Materialia, 2020; 199, 551-560. 10.1016/j.actamat.2020.08.037

Bhatlawande, Aishwarya↗

Formation and Restacking of Disordered Smectite Osmotic Hydrates

Clay swelling, an important phenomenon in natural systems, can dramatically affect the properties of soils and sediments. Something of particular interest in low-salinity, saturated systems are osmotic hydrates, forms of smectite in which the layer separation greatly exceeds the thickness of a single smectite layer due to the intercalation of water. In situ X-ray diffraction (XRD) studies have shown a strong link between ionic strength and average interlayer spacing in osmotic hydrates but also indicate the presence of structural disorder that has not been fully described. In the present study the structural state of expanded smectite in sodium chloride solutions was investigated by combining very low electron dose, high-resolution cryogenic-transmission electron microscopy observations with XRD experiments. Wyoming smectite (SWy-2) was embedded in vitreous ice to evaluate clay structure in aqua. Lattice-fringe images showed that smectite equilibrated in aqueous, low-ionic-strength solutions, exists as individual smectite layers, osmotic hydrates composed of parallel layers, as well as disordered layer conformations. There was no evidence found here for edge-to-sheet attractions, but significant variability in interlayer spacing was observed. Whether this variation could be explained by a dependence of the magnitude of long-range cohesive (van der Waals) forces on the number of layers in a smectite particle was investigated here. Calculations of the Hamaker constant for layer-layer interactions showed that van der Waals forces may span at least five layers plus the intervening water and confirmed that forces vary with layer number. The drying of the disordered osmotic hydrates induced re-aggregation of the smectite to form particles that exhibited coherent scattering domains. Clay disaggregation and restacking may be considered as an example of oriented attachment, with the unusual distinction that it may be cycled repeatedly by changing solution conditions.

36 MATERIALS SCIENCE↗

Microstructure of Mo/Si multilayers with B4C diffusion barrier layers

The growth behavior of B4C interlayers deposited at the interfaces of Mo/Si multilayers was investigated using x-ray photoemission spectroscopy, x-ray reflectivity, and x-ray diffraction measurements. We report an asymmetry in the formation of B4C at the B4C-on-Mo interface compared to the B4C-on-Si interface. X-ray photoelectron spectroscopy (XPS) depth profiling shows that for B4C-on-Mo the formed stoichiometry is close to expectation (4:1 ratio), while for B4C-on-Si it is observed that carbon diffuses from the B4C interfaces into the multilayer, resulting in nonstochiometric growth (>4:1). As a result, there is a discrepancy in the optical response near 13.5 nm wavelength, where B4C-on-Mo behaves according to model simulations, while B4C-on-Si does not. The as-deposited off-stoichiometric B4C-on-Si interface also explains why these interfaces show poor barrier properties against temperature induced interdiffusion. We show that the stoichiometry of B4C at the Mo-Si interfaces is connected to the structure of the layers onto which B4C is grown. Because of enhanced diffusion into the amorphous Si surface, we suggest that deposited boron and carbon atoms form SiXBY and SiXCY compounds. The low formation enthalpy of SiXCY ensures C depletion of any BXCY interlayer. Only after a saturated interfacial layer is formed, does further deposition of boron and carbon atoms result in actual B4C formation. In contrast to the off-stoichiometric B4C growth on top of Si, B4C grown on top of Mo retains the correct stoichiometry because of the higher formation enthalpies for MoXBY and MoXCY formation and the limited diffusion depth into the (poly)-crystalline Mo surface.

36 MATERIALS SCIENCE↗

Twist-engineered phonon polaritons in α − V 2 O 5

The advent of layered materials has unveiled new opportunities for tailoring electromagnetic waves at the subwavelength scale, particularly through the study of polaritons, a hybrid light–matter excitation. In this context, twist-optics, which investigates the optical properties of twisted stacks of van der Waals (vdW) layered specimens, has emerged as a powerful tool. Here, we explore the tunability of phonon polaritons in α-V 2 O 5 via interlayer twisting using scanning nano-infrared (IR) imaging. We show that the polaritonic response can be finely adjusted by varying their interlayer electromagnetic coupling, allowing for precise control over the propagation direction and phase transition from open unidirectional iso-frequency contours to closed elliptic geometries. Furthermore, our experimental results, in conjugate with theoretical modeling, reveal the mechanisms underpinning this tunability, highlighting the role of twist-induced nano-light modifications for advanced nanophotonic control at the nanoscale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, IR spectroscopy and crystal structure of [(UO 2 ) 2 {Be(H 2 O) 2 (PO 4 ) 2 }]·(H 2 O), the first compound with a trimer beryllophosphate anion

The first uranyl beryllophosphate, [(UO 2 ) 2 {Be(H 2 O) 2 (PO 4 ) 2 }]·(H 2 O), has been synthesized under hydrothermal conditions at 200°C. The monoclinic unit-cell parameters are: a =9.3361(1), b =8.8545(4), c =9.6592(10) Å, β=93.211(1)°, V =797.21(6) Å 3 , space group P 2 /n , Z =2. The crystal structure has been solved by direct methods and refined to final R 1 = 4.92% using 1294 I > 3σ( I ) reflections in the anisotropic approximation. The structure consists of sheets of Ur O 5 pentagonal bipyramids and PO 4 tetrahedra. Ur O 5 bipyramids are linked by edge-sharing to form infinite chains. Adjacent chains of Ur O 5 bipyramids are connected by sharing alternating edges of uranyl bipyramids with PO 4 tetrahedra. The resulting sheets are based on the well-known uranophane anion-topology. Be atoms are tetrahedrally coordinated by two oxygen atoms of PO 4 tetrahedra and two water molecules in the interlayer space. One isolated water molecule also occurs in the interlayer space, where it is held in position by H bonds. The connection between the phosphorus and beryllium tetrahedra leads to formation of an unbranched trimer [BeP 2 O 8 (H 2 O) 2 ] 4- observed for the first time in inorganic oxysalts.

nuclear (including radiation effects), materials a↗

Persistent photoconductivity in two-dimensional Mo 1-x W x Se 2 –MoSe 2 van der Waals heterojunctions

Van der Waals (vdW) heterojunctions consisting of vertically-stacked individual or multiple layers of two-dimensional (2D) layered semiconductors, especially the transition metal dichalcogenides (TMDs), are fascinating new artificial solids just nanometers-thin that promise novel optoelectronic functionalities due to the sensitivity of their electronic and optical properties to strong quantum confinement and interfacial interactions. Here, monolayers of n-type MoSe 2 and p-type Mo 1-x W x Se 2 –MoSe 2 are grown by vapor transport methods, then transferred and stamped to form artificial vdW heterostructures with different interlayer orientations. Atomic-resolution Z-contrast electron microscopy and electron diffraction are used to characterize both the individual monolayers and the atomic registry between layers in the bilayer vdW heterostructures. These measurements are compared with photoluminescence and low-frequency Raman spectroscopy, which indicates strong interlayer coupling in heterostructures. Remarkably, the heterojunctions exhibit an unprecedented photoconductivity effect that persists at room temperature for several days. This persistent photoconductivity is shown to be tunable by applying a gate bias that equilibrates the charge distribution. Furthermore, these measurements indicate that such ultrathin vdW heterojunctions can function as rewritable optoelectronic switches or memory elements under time-dependent photo-illumination, an effect which appears promising for new monolayer TMDs-based optoelectronic devices applications.

36 MATERIALS SCIENCE↗

Molecular Simulation Models of Carbon Dioxide Intercalation in Hydrated Sodium Montmorillonite

Carbon capture and storage (CCS) technologies provide effective options for reducing carbon dioxide (CO 2 ) emissions and mitigating global climate change. Geologic CO 2 storage involves the injection of supercritical CO 2 into deep geologic formations overlain by sealing formations and geologic traps that prevent the CO 2 from escaping. The ability of seals to retain injected CO 2 depends on their permeability and geomechanical property evolution. Caprocks are often comprised of shale or mudstone enriched with swelling clay minerals that can expand or contract upon interaction with CO 2 . Intercalation of CO 2 into interlayer of swelling clay causes evolution of the geomechanical stress and can promote fracture formation. The interlayer of expanded clay provides ample space for additional permanent CO 2 storage and its subsequent transformation into carbonates.

54 ENVIRONMENTAL SCIENCES↗

Dissolution of poorly soluble uranyl phosphate phases in the Metaautunite Subgroup under uranyl peroxide cage cluster forming conditions

Uranyl phosphate minerals are widespread in uranium deposits and usually exhibit very low solubility in aqueous systems. Uranyl phosphates of the autunite group and metaautunite subgroup impact the mobility of uranium in the environment and have inspired groundwater remediation strategies that emphasize their low solubility. The importance of soluble uranium-bearing macro-anions, including nanoscale uranyl peroxide cage clusters, is largely unexplored relative to solubilization of normally low-solubility uranium minerals. Eight synthetic analogs of metaautunite subgroup minerals have been prepared and placed in various alkaline aqueous solutions containing hydrogen peroxide and tetraethylammonium hydroxide. Each uranyl phosphate studied has a topologically identical anionic sheet of uranyl square bipyramids and phosphate tetrahedra combined with various cations (Li + , Na + , K + , Rb + , Cs + , Mg 2+ , Ca 2+ , Ba 2+ ) and water in the interlayer. Uranyl peroxides formed under many of the experimental conditions examined, including solid studtite [(UO 2 )(O 2 )(H 2 O) 2 ](H 2 O) 2 and soluble uranyl peroxide cage clusters containing as many as 28 uranyl ions. Uranyl phosphate solids in contact with solutions in which uranyl peroxide cage clusters formed dissolved extensively or completely. The greatest dissolution of uranyl phosphates occurred in systems that contained cations with larger hydrated radii, Li + and Na + . The details of the uranium speciation in solution depended on the pH and counter cations provided from the interlayers of the uranyl phosphate solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polytypism in semi-disordered lizardite and amesite by low-dose HAADF-STEM

Serpentine minerals exert important controls on the physical properties of ultramafic rocks and have the potential to influence deformation phenomena in fault zones and to control the release of water in subducted slabs. Sheet serpentine generally, and lizardite and amesite specifically, can adopt alternative crystallographic stacking arrangements called polytypes. Polytypism has been extensively studied in fully ordered crystals, but it remains largely enigmatic in the more common semi-disordered crystals that in long-range analyses such as X-ray diffraction only exhibit random combinations of 0b and ±1/3b interlayer shifts. To date, atomic-resolution imaging to identify locally ordered polytypes has been precluded by the beam-sensitive nature of this hydrous magnesium silicate mineral. Here, in this study, we employed low-dose high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) to study the polytypic structure of semi-disordered lizardite and amesite. Because the electron dose was as low as ~6000 e–/Å 2 , it was possible to directly resolve oxygen atomic columns and all the cations with a resolution of ~1 Å and reveal the short-range order. For lizardite, we identified long-period non-standard polytypes, including examples with 3, 4, 8, and 9 layers stemming from the ordering of the octahedral tilt along the a-axis. For amesite, we found short-range ordered polytypes with periodicities of up to 42 Å stemming from the ordering of interlayer shifts along the b-axis. The resolution was sufficient to determine the relative abundance of 6R 2 , 6R 1 , 2H 1 , and 2H 2 polytypes in amesite to be 46.1, 29.6, 7.7, and 1.9%, respectively. This is contrary to the expectation that the most common form of amesite is the 2H 2 polytype, which may be more likely to form macroscopic crystals suitable for conventional X-ray diffraction-based studies. We conclude that HAADF-STEM methods open the way for the characterization of beam-sensitive minerals and to resolve the structural details of less well-ordered (but possibly more abundant) minerals at a unit-cell scale.

58 GEOSCIENCES↗

Bobfinchite, Na[(UO2)8O3(OH)11]·10H2O, a new Na-bearing member of the schoepite family

Abstract The new mineral bobfinchite (IMA2020-082), Na[(UO2)8O3(OH)11]·10H2O, was found in the Burro mine, Slick Rock district, San Miguel County, Colorado, U.S.A., where it occurs as an oxidation product of uraninite on asphaltite matrix in intimate association with gypsum, natrozippeite, metaschoepite, and uranopilite. Bobfinchite crystals are transparent to translucent, yellow, lozenge-shaped disks up to 0.3 mm wide. Crystals are flattened on [100] and exhibit the forms {100}, {011}, {021}, {021}, and {011}. Bobfinchite has a pale-yellow streak and emits very dim yellow fluorescence under 365 nm ultraviolet illumination. The crystals are brittle with very good {100} cleavage and irregular, stepped fracture. The Mohs hardness is ca. 2 based on scratch tests. The calculated density is 5.044 g/cm3 based on the empirical formula and 5.036 g/cm3 for the ideal formula. Bobfinchite is optically biaxial (–), with α = 1.690(5), β = 1.7205(5), and γ = 1.730(5) (white light). The measured 2V, estimated from the interference figure, is 55(5)° and the calculated value is 59.1°. Dispersion is moderate, r > v; orientation: X = a, Y = b, Z = c; pleochroism: X nearly colorless, Y yellow, Z yellow; X < Y ≈Z. Electron microprobe analysis provided the empirical formula (Na0.99Pb0.02)[(UO2)7.99O3(OH)11]·10H2O. The five strongest X-ray powder diffraction lines are [dobs in Å(I)(hkl)]: 7.34(100)(200), 3.59(50)(024), 3.23(60)(224), 3.18(36)(240), and 2.01(23)(624,551,208,640,346). Bobfinchite is orthorhombic, Pbcn, a = 14.6249(9), b = 14.0389(10), c = 16.6923(10) Å, V = 3427.2(4) Å3, and Z = 4. The structure of bobfinchite (R1 = 0.0330 for 3770 I > 4σI) is built from uranyl oxide-hydroxide sheets that adopt the fourmarierite topology, with interlayer Na+ and H2O groups. Both the sheet and interlayer topology mimic those observed in natural and synthetic Na-metaschoepites studied previously, and as seen in other uranyl oxide hydrate minerals, charge balance is achieved at specific sites in the sheet through the substitution O2– ↔ (OH)–.

Geochemistry & Geophysics↗