Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interface defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Chromatin binding by HORMAD proteins regulates meiotic recombination initiation

The meiotic chromosome axis coordinates chromosome organization and interhomolog recombination in meiotic prophase and is essential for fertility. In S. cerevisiae , the HORMAD protein Hop1 mediates the enrichment of axis proteins at nucleosome-rich islands through a central chromatin-binding region (CBR). Here, we use cryoelectron microscopy to show that the Hop1 CBR directly recognizes bent nucleosomal DNA through a composite interface in its PHD and winged helix–turn–helix domains. Targeted disruption of the Hop1 CBR-nucleosome interface causes a localized reduction of axis protein binding and meiotic DNA double-strand breaks (DSBs) in axis islands and leads to defects in chromosome synapsis. Synthetic effects with mutants of the Hop1 regulator Pch2 suggest that nucleosome binding delays a conformational switch in Hop1 from a DSB-promoting, Pch2-inaccessible state to a DSB-inactive, Pch2-accessible state to regulate the extent of meiotic DSB formation. Phylogenetic analyses of meiotic HORMADs reveal an ancient origin of the CBR, suggesting that the mechanisms we uncover are broadly conserved.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of ZnO seed layer on the morphology and optical properties of ZnO nanorods grown on GaN buffer layers

ZnO nanorods were grown by chemical bath deposition on sputtered, polycrystalline GaN buffer layers with and without ZnO seed layer. Scanning electron microscopy and X-ray diffraction show that the ZnO nanorods on GaN buffer layers are not vertically well aligned. Photoluminescence spectrum of ZnO nanorods grown on GaN buffer layer, however exhibits a much stronger near-band-edge emission and negligible defect emission, compared to the nanorods grown on ZnO buffer layer. These features are attributed to gallium incorporation at the ZnO-GaN interface. The introduction of a thin (25 nm) ZnO seed layer on GaN buffer layer significantly improves the morphology and vertical alignment of ZnO-NRs without sacrificing the high optical quality of ZnO nanorods on GaN buffer layer. The presence of a thick (200 nm) ZnO seed layer completely masks the effect of the underlying GaN buffer layer on the morphology and optical properties of nanorods.

36 MATERIALS SCIENCE↗

Effect of thermal oxidation on helium implanted 316L stainless steel

The effect of thermal oxide layer on He implanted 316L stainless steel was studied to evaluate experimentally how thermal oxidation affects the diffusion and distribution of He in the material. In the case of thermal oxidation of a He implanted sample, with an increase in oxidation time, the max swelling height increases logarithmically as a function of time and finally saturates for all samples except for the lowest dose of implanted He. Concerning TEM results, two void regions are identified. Similar to the calculation, the total irradiated depth was around 250 nm and the large void region was formed around 100–150 nm depth. On the other hand, the small void region was observed immediately under oxide layer from the thermal oxidation. In contrast, there were no voids in the altered zone near the metal/oxide interface in the non-thermal oxidized/He implanted sample. This description of the phenomena was justified using the Kirkendall effect and the Point Defect Model.

36 MATERIALS SCIENCE↗

XtalCAMP: a comprehensive program for the analysis and visualization of scanning Laue X-ray micro-/nanodiffraction data

XtalCAMP is a software package based on the MATLAB platform, which is suitable for, but not limited to, the analysis and visualization of scanning Laue X-ray micro-/nanodiffraction data. The main objective of the software is to provide complementary functionalities to the Laue indexing software packages used at several synchrotron beamlines. Here, the graphical user interfaces allow the easy analysis of characteristic microstructure features, including real-time intensity mapping for a quick examination of phase, grain and defect distribution, 2D color-coded mapping of microstructural properties from the output of other Laue indexing software, crystal orientation visualization, grain boundary characterization based on orientation/misorientation calculation, principal strain/stress analysis, and strain ellipsoid representation, as well as a series of additional toolkits. As an example, XtalCAMP is applied to the microstructural investigation of a solution-heat-treated Ni-based superalloy manufactured using a laser 3D-printing technique, and a deformed natural quartzite from Val Bregaglia in the Central Alps.

36 MATERIALS SCIENCE↗

Nonisostructural complex oxide heteroepitaxy

The authors present an overview of the fundamentals and representative examples of the growth of epitaxial complex oxide thin films on structurally dissimilar substrates. The authors will delineate how the details of particular crystal structures and symmetry of different oxide surfaces can be employed for a rational approach to the synthesis of nonisostructural epitaxial heterostructures. The concept of oxygen eutaxy can be widely applied. Materials combinations will be split into three categories, and in all cases the films and substrates occur in different crystal structures: (1) common translational and rotational symmetry between the film and substrate planes; (2) translational symmetry mismatch between the substrates and films that is distinct from a simple mismatch in lattice parameters; and (3) rotational symmetry mismatch. In case (1), in principle single-crystalline thin films can be attained despite the films and substrates possessing different crystal structures. In case (2), antiphase boundaries will be prevalent in the thin films. In case (3), thin-film rotational variants that are joined by tilt boundaries will be present. Diffraction techniques to determine crystallographic alignment and epitaxial variants are discussed, and transmission electron microscopy studies to investigate extended defects in the thin films will also be reviewed. The authors end with open problems in this field regarding the structure of oxide interfaces that can be topics for future research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational Approaches for Clean Energy Materials

Currently, 80% of the global final energy consumption occurs in form of fuels and only 20% as electricity. On the other hand, renewable energy additions come almost exclusively in the form of electricity (dominantly photovoltaics and wind). Thus, a successful energy transition will require enormous growth in renewables, sufficient to convert excess electricity into fuels, as well as the development of non-electricity based solar fuel technologies. As much as photovoltaic capacities have grown over the past 20 years, it is far from clear that current technologies and materials are up to the task to grow from here by yet another factor 100 until 2050. Therefore, sustained research efforts on emerging inorganic semiconductors for solar electricity and fuels are essential for facing the double challenge of climate change and energy security. Computational materials science can make important contributions, guiding and supporting research activities through both materials search and discovery and through detailed studies that help to develop a mechanistic understanding of materials performance and bottlenecks. This presentation will highlight three recent computational projects with relevance for photovoltaics and solar fuels (1) Defect graph neural networks (dGNN) for materials discovery in solar thermochemical hydrogen (STCH) [1]. The dGNN approach facilitates broad and fast materials screening for defect properties. (2) Modeling highly off-stoichiometric systems by evaluating the free energy of defect interaction [2]. This approach allows quantitative prediction of H2 production in complex STCH oxides. (3) First-principles atomic structure prediction for interfaces [3]. This work showed how an atomically thin CdCl2 interlayer phase enables in principle ideal electron transport across the incommensurate SnO2/CdTe interface. [1] M.D. Witman, A. Goyal, T. Ogitsu, A.H. McDaniel, S. Lany, Nat. Comput. Sci. (2023). https://doi.org/10.1038/s43588-023-00495-2. [2] A. Goyal, M.D. Sanders, R.P. O'Hayre, S. Lany, PRX Energy 3, 013008 (2024). https://doi.org/10.1103/PRXEnergy.3.013008. [3] A. Sharan, M. Nardone, D. Krasikov, N. Singh, S. Lany, Appl. Phys. Rev. 9, 041411 (2022). https://doi.org/10.1063/5.0104008.

density functional theory↗

Small Polarons and Surface Defects in Metal Oxide Photocatalysts Studied Using XUV Reflection–Absorption Spectroscopy

In photocatalytic transition metal oxides, the surface electronic structure and carrier kinetics are complicated by both charge trapping at defects and self-trapping by small polaron formation. These effects are specific to both the material and the type of defect or surface states involved. Here we review recent studies on ultrafast photoexcited charge carrier dynamics at the surfaces of alpha-Fe 2 O 3 (hematite) and NiO and at the interface of a alpha-Fe 2 O 3 /NiO heterojunction using extreme ultraviolet (XUV) reflection-absorption spectroscopy. We study dynamics of small polaron formation at hematite surfaces showing that the rate of carrier self-trapping is slower than in the bulk due to a greater lattice reorganization energy required for surface polaron formation. We also show that surface dynamics of hematite can be systematically tuned to control carrier transport properties through surface functionalization. To better understand the impact of defects on carrier events, we study charge carrier recombination of NiO. It is shown that O vacancies have no detrimental effect on carrier lifetime while grain boundaries cause fast recombination. Finally, we study a model heterojunction consisting of alpha-Fe 2 O 3 and NiO and find that interfacial charge transfer across these two materials occurs by a two-step mechanism where the interfacial electric field drives fast exciton dissociation followed by hole injection from alpha-Fe2O3 to NiO. Finally, these examples illustrate future opportunities to observe surface electron dynamics in photocatalytic materials with element and chemical state resolution using ultrafast XUV spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CDB-AP: An application for coincidence Doppler broadening spectroscopy analysis

Coincidence Doppler Broadening (CDB) Positron Annihilation Spectroscopy (PAS) is a material analysis technique that can be used to non-destructively measure characteristics of structural defects in samples. Analyzing and comparing large datasets obtained using this technique, however, can be complicated and time intensive. The Coincidence Doppler Broadening Analysis Program (CDB-AP) is a graphical user interface that facilitates rapid analysis of many data files while using transparent processes. It is already used in three laboratories at Idaho National Laboratory and can be used in laboratories worldwide.

36 MATERIALS SCIENCE↗

Selective growth of Ni4Ti3 precipitate variants induced by complicated cyclic stress during laser additive manufacturing of NiTi-based composites

Highlights: • The NiTi-based composites were in-situ synthesized by SLM. • Ni{sub 4}Ti{sub 3} could tailor the phase transformation temperature of TiC/NiTi composites. • A three-dimensional stress field modeling of TiC/NiTi composites was established. • The relationship between growth of Ni{sub 4}Ti{sub 3} variants and cyclic stress was disclosed. - Abstract: NiTi-based composites were in-situ synthesized by selective laser melting (SLM) additive manufacturing technology with formation of a great many Ni{sub 4}Ti{sub 3} precipitates. The differential scanning calorimetry (DSC) were carried out to exhibit the similar phase transformation temperature (A{sub s} = 51.82 °C, A{sub f} = 94.02 °C, M{sub s} = 55.87 °C and M{sub f} = 18.93 °C) by comparing with that of SLM-fabricated equi-atomic NiTi alloy, which could be attributed to the compensation of Ni{sub 4}Ti{sub 3} precipitates for the effect of an addition of TiC particles. Three different Ni{sub 4}Ti{sub 3} precipitate variants ((111){sub R}//(1 1-bar 1-bar ){sub B2}, (111){sub R}//( 1-bar 1-bar 1){sub B2}, and (111){sub R}//( 1-bar 1 1-bar ){sub B2}) with various precipitate diameters were observed within SLM fabricated part, showing apparently selective growth behavior. By high-resolution transmission electron microscopy, severe lattice defects formed surrounding the smaller variant, while relatively intact lattice structure was found around the larger one, which indicated that high strain energy was produced in the interface between the matrix and the smaller variant. Furthermore, finite element simulation method was applied to disclose the evolution features of complicated cyclic stress during SLM processing of TiC/NiTi composites. By predicting, the main constraint mode within as-fabricated track was tensile stress effect. Based on the redistribution behavior of thermal stress and the coupling effect between the thermal stress and strain field induced by Ni{sub 4}Ti{sub 3} precipitate, the selective growth mechanism of Ni{sub 4}Ti{sub 3} variant was revealed.

36 MATERIALS SCIENCE↗

Effects of basal-plane thermal conductivity and interface thermal conductance on the hot spot temperature in graphene electronic devices

In this study, electrostatic force microscopy and scanning thermal microscopy are employed to investigate the electric transport and localized heating around defects introduced during transfer of graphene grown by chemical vapor deposition to an oxidized Si substrate. Numerical and analytical models are developed to explain the results based on the reported basal-plane thermal conductivity, κ, and interfacial thermal conductance, G , of graphene and to investigate their effects on the peak temperature. Irrespective of the κ values, increasing G beyond 4 × 10 7 W m –2 K –1 can reduce the peak temperature effectively for graphene devices made on sub-10 nm thick gate dielectric, but not for the measured device made on 300-nm-thick oxide dielectric, which yields a cross-plane thermal conductance ( G ox ) much smaller than the typical G of graphene. In contrast, for typical G values reported for graphene, increasing κ from 300 W m –1 K –1 toward 3000 W m –1 K –1 is effective in reducing the hot spot temperature for the 300-nm-thick oxide devices but not for the sub-10 nm gate dielectric case, because the heat spreading length (l) can be appreciably increased relative to the micron-scale localized heat generation spot size ( r 0 ) only when the oxide layer is sufficiently thick. As such, enhancement of κ increases the vertical heat transfer area above the gate dielectric only for the thick oxide case. In all cases considered, the hot spot temperature is sensitive to varying G and κ only when the G / G ox ratio and r 0 /l ratio are below about 5, respectively.

36 MATERIALS SCIENCE↗

Radiation-Induced Defect Formation Kinetics in Inconel–Cu Multimetallic Layered Composites

This study investigates the stability of Inconel–Cu Multimetallic Layered Composites (MMLCs) in nuclear reactor applications using Molecular Dynamics simulations. The focus is on understanding the underlying mechanisms governing the properties of MMLCs for advanced nuclear reactors, specifically, the mechanochemistry of the interface between Inconel and copper alloys. The selection of Inconel–Cu MMLCs is primarily due to copper’s superior thermal conductivity, enhancing heat management within reactors by preventing hotspots and ensuring uniform temperature distribution. This research examines Incoloy 800H and two Inconel variants (718 and 625), assessing their stability at 1000 K after exposure to 10 keV collision cascades up to 0.12 dpa. Notable findings include defect clustering on the {1 2 0} family of planes of Inconel and Cu, with Stacking Faults and Lomer–Cottrell locks on the Inconel side.

Ramesh, Rajesh↗

High resolution simulations of ignition capsule designs for the National Ignition Facility

Ignition capsule designs for the National Ignition Facility (NIF) [G. H. Miller, E. I. Moses, and C. R. Wuest, Opt. Eng. 443, 2841 (2004)] have continued to evolve in light of improved physical data inputs, improving simulation techniques, and - most recently - experimental data from a growing number of NIF sub-ignition experiments. This paper summarizes a number of recent changes to the cryogenic capsule design and some of our latest techniques in simulating its performance. Specifically, recent experimental results indicated harder x-ray drive spectra in NIF hohlraums than were predicted and used in previous capsule optimization studies. To accommodate this harder drive spectrum, a series of high-resolution 2-D simulations, resolving Legendre mode numbers as high as two thousand, were run and the germanium dopant concentration and ablator shell thicknesses re-optimized accordingly. Simultaneously, the possibility of cooperative or nonlinear interaction between neighboring ablator surface defects has motivated a series of fully 3-D simulations run with the massively parallel HYDRA code. These last simulations include perturbations seeded on all capsule interfaces and can use actual measured shell surfaces as initial conditions. 3-D simulations resolving Legendre modes up to two hundred on large capsule sectors have run through ignition and burn, and higher resolution simulations resolving as high as mode twelve hundred have been run to benchmark high-resolution 2-D runs. Finally, highly resolved 3-D simulations have also been run of the jet-type perturbation caused by the fill tube fitted to the capsule. These 3-D simulations compare well with the more typical 2-D simulations used in assessing the fill tube's impact on ignition. Coupled with the latest experimental inputs from NIF, our improving simulation capability yields a fuller and more accurate picture of NIF ignition capsule performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Band alignment and chemical bonding at the GaAs/Al{sub 2}O{sub 3} interface: A hybrid functional study

The band alignment at the interface between GaAs and amorphous Al{sub 2}O{sub 3} is studied through the use of hybrid functionals. For the oxide component, a disordered model is generated through density-functional molecular dynamics. The achieved structure shows good agreement with the experimental characterization. The potential line-up across the interface is obtained for two atomistic GaAs/Al{sub 2}O{sub 3} interface models, which differ by the GaAs substrate termination. The calculated valence band offset amounts to 3.9 eV for an interface characterized by the occurrence of Ga–O bonds as dominant chemical bonding, favoring the high-energy side in the range of experimental values (2.6–3.8 eV). The effect of As antisite and As–As dimer defects on the band alignment is shown to be negligible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth and Properties of Vapor Diffused Nb3Sn Coating for Superconducting Radiofrequency Accelerator Cavity Applications

The desire to reduce construction and operating costs of future SRF accelerators motivates the search for higher-performing alternative materials. Nb3Sn (Tc ~ 18.3 K and Hsh ~ 425 mT) is the front runner. The tin vapor diffusion process is currently the technique of choice to produce promising Nb3Sn-coated cavities. Understanding Nb3Sn nucleation and growth in this process is essential to progress. Samples representing different stages of Nb3Sn formation have been produced and studied to elucidate the effects of nucleation, growth, process conditions, and impurities. Nb3Sn films with thickness from a few hundred nm up to ~15 µm were grown and characterized. The microscopic examination of samples suggests the mechanisms of thin film nucleation and growth. Broadly, nucleation deposits tin as a thin surface phase and, under some conditions, a few hundred nanometer sized particles as well. Conditions that impair nucleation promote the formation of defects, such as ?patches?, in subsequent coating growth. Analysis of coated samples is consistent with the model of Nb3Sn grown in which tin diffuses via grain boundaries to Nb3Sn-Nb interface, where the growth Nb3Sn into the niobium bulk takes place. Similar scaling laws are found for grain growth and layer thickness. Non-parabolic layer growth is consistent with significant grain growth, which reduces the number of Sn-transport channels. Examination of patchy region in Nb3Sn coating revealed it to be large single crystalline grains, pointing to impeded Nb3Sn layer growth due to low grain boundary density, resulting in a significantly thin coating in those areas. Examination of RF loss regions from a coated cavity, identified with a thermometry mapping system showed patchy regions and carbonus defects were associated with strong local field-dependent surface resistance. RF measurements of coated cavities were combined with material characterization of witness samples and coated-cavity cutouts to improve the coating process. Understanding obtained and applied to cavity coatings, resulted in single-cell Nb3Sn cavities with a quality factor of ~2 ×1010 up to 15 MV/m accelerating gradient at 4 K, without "Wuppertal" Q-slope. We have also produced Nb3Sn-coated CEBAF 5-cell cavities with accelerating gradients useful for accelerator cryomodules. This dissertation will discuss the genesis of the Nb3Sn coating in a typical tin vapor diffusion process, effects of different process parameters, and its consequences to the coating of single-cell and multi-cell SRF cavities.

Pudasaini, Uttar↗

Strain relaxation in short-period polar GaN/AlN superlattices

We have investigated the strain relaxation mechanisms in short-period polar GaN/AlN superlattices deposited by plasma-assisted molecular-beam epitaxy, and designed to display intersubband transitions at 1.55 mum. In a first stage, we have identified the growth conditions to minimize strain relaxation, using a Ga excess to reduce the (0001) surface free energy of both GaN and AlN. Under these growth conditions, crack propagation is not observed, even for the tensile-strained superlattices grown on GaN templates. The initial misfit relaxation in the vicinity of the buffer occurs by the formation of a-type dislocations. The final strain state of the superlattice, reached after 10-20 periods, is independent of the substrate (either GaN or AlN templates). Once the steady-state conditions are reached, we observe a periodic partial relaxation of quantum wells and barriers. High-resolution transmission electron microscopy indicates that the periodic relaxation can be related to the presence of basal and prismatic stacking faults creating clusters with an in-plane length of tens of nanometers. The effect of these defects on the optical performance of the superlattices is discussed by simulation of electronic structure using an 8x8kcentre dotp Schroedinger-Poisson solver. In the presence of basal stacking faults at the quantum well interfaces, the deviation of the e{sub 1}-e{sub 2} intersubband transition with respect to the nominal value is expected to be smaller than the measured absorption line width.

36 MATERIALS SCIENCE↗

Insights into the mechanism of Rad51 recombinase from the structure and properties of a filament interface mutant

Rad51 protein promotes homologous recombination in eukaryotes. Recombination activities are activated by Rad51 filament assembly on ssDNA. Previous studies of yeast Rad51 showed that His352 occupies an important position at the filament interface, where it could relay signals between subunits and active sites. To investigate, we characterized yeast Rad51 H352A and H352Y mutants, and solved the structure of H352Y. H352A forms catalytically competent but salt-labile complexes on ssDNA. In contrast, H352Y forms salt-resistant complexes on ssDNA, but is defective in nucleotide exchange, RPA displacement and strand exchange with full-length DNA substrates. The 2.5 {angstrom} crystal structure of H352Y reveals a right-handed helical filament in a high-pitch (130 {angstrom}) conformation with P61 symmetry. The catalytic core and dimer interface regions of H352Y closely resemble those of DNA-bound Escherichia coli RecA protein. The H352Y mutation stabilizes Phe187 from the adjacent subunit in a position that interferes with the {gamma}-phosphate-binding site of the Walker A motif/P-loop, potentially explaining the limited catalysis observed. Comparison of Rad51 H352Y, RecA-DNA and related structures reveals that the presence of bound DNA correlates with the isomerization of a conserved cis peptide near Walker B to the trans configuration, which appears to prime the catalytic glutamate residue for ATP hydrolysis.

36 MATERIALS SCIENCE↗

Oxide– and Silicate–Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by “anomalies” or “non-idealities” such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide– and silicate–water interfaces. This critical review discusses how science progresses from understanding ideal solid–water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. Further, we anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin Polarized Conductance in Hybrid Graphene Nanoribbons Using 5-7 Defects

We present a class of intramolecular graphene heterojunctions and use first-principles density functional calculations to describe their electronic, magnetic, and transport properties. The hybrid graphene and hybrid graphene nanoribbons have both armchair and zigzag features that are separated by an interface made up of pentagonal and heptagonal carbon rings. Contrary to conventional graphene sheets, the computed electronic density of states indicates that all hybrid graphene and nanoribbon systems are metallic. Hybrid nanoribbons are found to exhibit a remarkable width-dependent magnetic behavior and behave as spin polarized conductors.

36 MATERIALS SCIENCE↗