Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “input data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Analysis of tipping-curve measurements performed at the DSS-13 beam-waveguide antenna at 32.0 and 8.45 GigaHertz

This article reports on the analysis of the Ka-band Antenna Performance Experiment tipping-curve data acquired at the DSS-13 research and development beam-waveguide (BWG) antenna. By measuring the operating system temperatures as the antenna is moved form zenith to low-elevation angles and fitting a model to the data, one can obtain information on how well the overall temperature model behaves at zenith and approximate the contribution due to the atmosphere. The atmospheric contribution estimated from the data can be expressed in the form of (1) atmospheric noise temperatures that can provide weather statistic information and be compared against those estimated from other methods and (2) the atmospheric loss factor used to refer efficiency measurements to zero atmosphere. This article reports on an analysis performed on a set of 68 8.4-GHz and 67 32-GHz tipping-curve data sets acquired between December 1993 and May 1995 and compares the results with those inferred from a surface model using input meteorological data and from water vapor radiometer (WVR) data. The general results are that, for a selected subset of tip curves, (1) the BWG tipping-curve atmospheric temperatures are in good agreement with those determined from WVR data (the average difference is 0.06 +/- 0.64 K at 32 GHz) and (2) the surface model average values are biased 3.6 K below those of the BWG and WVR at 32 GHz.

Morabito, D. D.↗
NASA NTRS2020

Titan Global Reference Atmospheric Model (Titan-GRAM): User Guide

This Technical Memorandum summarizes the atmospheric data model in Titan-GRAM and provides a guide for the user to obtain, set up, and run the code in various configurations. Section 2 describes the input atmospheric data files and how they are used in Titan-GRAM. Section 3 explains the process to obtain the Titan-GRAM code and data files and how to set up and run the program. Appendices A through E provide additional details regarding the Titan-GRAM input and output files. Appendix F provides a history of Titan-GRAM revisions.

Titan Global Reference Atmospheric Model,↗
NASA NTRS1985

Dynamic and static initialization of a mesoscale model using VAS satellite data

Various mesoscale weather forecast model initialization procedures were tested in seven simulation forecasts for a 12 hr period in July 1981. Attention was given to the impacts of using as input radiosonde data, VISSR Atmospheric Sounder (VAS) data and a combination of VAS and data from a smoothed global analysis. The data were assimilated with successive correction objective analysis procedures. The model had a 60 km horizontal grid-length resolution, 14 layers in the vertical, and accounted for short- and long-wave energy in the surface energy budget but not in the atmosphere. Conventional data were used for the mass and moisture fields. The trials showed that VAS data enhanced the predictions of the temperature and mass variables, while winds were least accurately predicted when VAS data were entered in the initializations. Finally, statically initialized precipitation forecasts from radiosonde and/or VAS data exhibited equal skill.

Beauchamp, J. G.↗
NASA NTRS2006

Thermal Band Atmospheric Correction Using Atmospheric Profiles Derived from Global Positioning System Radio Occultation and the Atmospheric Infrared Sounder

This Rapid Prototyping Capability study explores the potential to use atmospheric profiles derived from GPS (Global Positioning System) radio occultation measurements and by AIRS (Atmospheric Infrared Sounder) onboard the Aqua satellite to improve surface temperature retrieval from remotely sensed thermal imagery. This study demonstrates an example of a cross-cutting decision support technology whereby NASA data or models are shown to improve a wide number of observation systems or models. The ability to use one data source to improve others will be critical to the GEOSS (Global Earth Observation System of Systems) where a large number of potentially useful systems will require auxiliary datasets as input for decision support. Atmospheric correction of thermal imagery decouples TOA radiance and separates surface emission from atmospheric emission and absorption. Surface temperature can then be estimated from the surface emission with knowledge of its emissivity. Traditionally, radiosonde sounders or atmospheric models based on radiosonde sounders, such as the NOAA (National Oceanic & Atmospheric Administration) ARL (Air Resources Laboratory) READY (Real-time Environmental Application and Display sYstem), provide the atmospheric profiles required to perform atmospheric correction. Unfortunately, these types of data are too spatially sparse and too infrequently taken. The advent of high accuracy, global coverage, atmospheric data using GPS radio occultation and AIRS may provide a new avenue for filling data input gaps. In this study, AIRS and GPS radio occultation derived atmospheric profiles from the German Aerospace Center CHAMP (CHAllenging Minisatellite Payload), the Argentinean Commission on Space Activities SAC-C (Satellite de Aplicaciones Cientificas-C), and the pair of NASA GRACE (Gravity Recovery and Climate Experiment) satellites are used as input data in atmospheric radiative transport modeling based on the MODTRAN (MODerate resolution atmospheric TRANsmittance) radiative transport software to separate out the atmospheric component of measured top of atmosphere radiance. Simulated water bodies across a variety of MODTRAN model atmospheres including desert, mid-latitude, tropical and sub-artic conditions provide test bed conditions. Atmospherically corrected radiance and surface temperature results were compared to those obtained using traditional radiosonde balloon data and models. In general, differences between the different techniques were less than 2 percent indicating the potential value satellite derived atmospheric profiles have to atmospherically correct thermal imagery.

Pagnutti, Mary↗
NASA NTRS1978

A method for predicting full scale buffet response with rigid wind tunnel model fluctuating pressure data. Volume 1: Prediction method development and assessment

The method requires unsteady aerodynamic forces, natural airplane modes, and the measured pressure data as input. A gust response computer program is used to calculate buffet response due to the forcing function posed by the measured pressure data. By calculating both symmetric and antisymmetric solutions, upper and lower bounds on full-scale buffet response are formed. Comparisons of predictions with flight test results are made and the effects of horizontal tail loads and static aeroelasticity are shown. Discussions are also presented on the effects of primary wing torsion modes, chordwise and spanwise phase angles, and altitude.

Cunningham, A. M., Jr.↗
NASA NTRS1988

Data Transport Subsystem - The SFOC glue

The design and operation of the Data Transport Subsystem (DTS) for the JPL Space Flight Operation Center (SFOC) are described. The SFOC is the ground data system under development to serve interplanetary space probes; in addition to the DTS, it comprises a ground interface facility, a telemetry-input subsystem, data monitor and display facilities, and a digital TV system. DTS links the other subsystems via an ISO OSI presentation layer and an LAN. Here, particular attention is given to the DTS services and service modes (virtual circuit, datagram, and broadcast), the DTS software architecture, the logical-name server, the role of the integrated AI library, and SFOC as a distributed system.

Parr, Stephen J.↗
NASA NTRS1989

Satellite observation and mesoscale cloud modeling of St. Anthony, Minnesota storm clouds

Both rawinsonde data and geosynchronous satellite imagery were used to study the life cycles of St. Anthony, Minnesota's severe convective storms. Cloud modeling, with input sounding data from Saint Cloud, Minnesota, and rapid-scan imagery from GOES were used to investigate storm cloud formation, development and dissipation. Comparisons were made among the seven groups of severe storms which produced an outbreak of 30 tornadoes across the United States.

Hung, R. J.↗
NASA NTRS2003

Ocean Color and Evidence of Chlorophyll Signature in the TOMS Minimum Reflectivity Data

Analysis of the TOMS minimum reflectivity data for 380 nm channel (R380) show regions of high reflectivity values (approx. 7 to 8%) over Sargasso Sea in the Northern Atlantic, anti-cyclonic region in the Southern Atlantic, and a large part of the ocean in the Southern Pacific, and low values (5 approx. 6 %) over the rest of the open ocean. Through radiative transfer simulations we show that these features are highly correlated with the distribution of chlorophyll in the ocean. Theoretical minimum reflectivity values derived with the help of CZCS chlorophyll concentration data as input into a vector ocean-atmosphere radiative transfer code developed by Ahmad and Fraser show very good agreement with TOMS minimum reflectivity data for the winter season of year 1980. For the summer season of year 1980, good qualitative agreement is observed in the equatorial and northern hemisphere but not as good in the southern hemisphere. Also, for cloud-free conditions, we find a very strong correlation between R340 minus R380 values and the chlorophyll concentration in the ocean. Results on the possible effects of absorbing and non-absorbing aerosols on the TOMS minimum reflectivity will also be presented. The results also imply that ocean color will affect the aerosol retrieval over oceans unless corrected.

Ahmad, Z.↗
NASA NTRS2005

Fault Diagnosis in HVAC Chillers

Modern buildings are being equipped with increasingly sophisticated power and control systems with substantial capabilities for monitoring and controlling the amenities. Operational problems associated with heating, ventilation, and air-conditioning (HVAC) systems plague many commercial buildings, often the result of degraded equipment, failed sensors, improper installation, poor maintenance, and improperly implemented controls. Most existing HVAC fault-diagnostic schemes are based on analytical models and knowledge bases. These schemes are adequate for generic systems. However, real-world systems significantly differ from the generic ones and necessitate modifications of the models and/or customization of the standard knowledge bases, which can be labor intensive. Data-driven techniques for fault detection and isolation (FDI) have a close relationship with pattern recognition, wherein one seeks to categorize the input-output data into normal or faulty classes. Owing to the simplicity and adaptability, customization of a data-driven FDI approach does not require in-depth knowledge of the HVAC system. It enables the building system operators to improve energy efficiency and maintain the desired comfort level at a reduced cost. In this article, we consider a data-driven approach for FDI of chillers in HVAC systems. To diagnose the faults of interest in the chiller, we employ multiway dynamic principal component analysis (MPCA), multiway partial least squares (MPLS), and support vector machines (SVMs). The simulation of a chiller under various fault conditions is conducted using a standard chiller simulator from the American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE). We validated our FDI scheme using experimental data obtained from different types of chiller faults.

Choi, Kihoon↗
NASA NTRS1981

High temperature cyclic oxidation furnace testing at NASA Lewis Research Center

A standardized method of testing the cyclic oxidation resistance of various alloys in static air to 1200 C was developed and is routinely used at NASA Lewis Research Center. Test samples are automatically raised and lowered into a resistance wound furnace for a series of fixed interval heating and cooling cycles. Spall catchers collect the accumulated spall from each sample. The samples are weighed intermittently to generate specific weight change/time data. At various test times the samples and the accumulated spall are analyzed by X-ray diffraction. A computer program uses this gravimetric and X-ray data as input to print out the oxidation curves and specific weight change/time and X-ray results in a published format, organizes, and indexes the data. So far, several hundred Fe, Ni, and Co base alloys were tested using this same basic procedure and results form the basis of a series of cyclic oxidation handbooks to be published by NASA. Such specific weight change/time data were used to estimate the oxidative metal consumption by several computer modeling techniques to rank alloys and for use in life testing estimates.

Barrett, C. A.↗
NASA NTRS1989

Continental shelf fish production estimation from CZCS chlorophyll data

A method for ocean fish production estimation was proposed for development. The method was to use data acquired with the Coastal Zone Color Scanner, and processed into chlorophyll concentrations by the GSFC ocean Sciences Division, in combination with fish production and primary production data acquired from different ocean areas. A linear relation exits between annual fish production and annual phytoplankton carbon production for a wide range of coastal ocean environments. The uses of several existing algorithms which relate primary production to CZCS chlorophyll data as input to the fish production regression model is proposed. A question relating phytoplankton production to CZCS chlorophyll was obtained by Eppley (1984) using chlorophyll data obtained from field samples, equivalent to chlorophyll data obtained from CZCS imagery, and primary production data obtained from ship-board observations on a wide variety of coastal and open ocean environments. This equation was modified with additional data and was successfully tested using CZCS data and field chlorophyll and phytoplankton production data obtained from northeastern North American continental shelf waters and Atlantic open ocean waters. The modified Eppley (1984) relation also estimated phytoplankton annual carbon production in the Sargasso Sea within the confidence limits of a mean value obtained from the Eppley (1984) equation for oceanic waters that provide about 90 percent of total ocean primary production. The modified Eppley production formula applied to CZCS chlorophyll data obtained from several northeastern North American coastal environments gave phytoplankton annual carbon production values similar to the values used in the fish production regression equation.

Iverson, Richard L.↗
NASA NTRS1992

Model validation - A connection between robust control and identification

The gap between the models used in control synthesis and those obtained from identification experiments is considered by investigating the connection between uncertain models and data. The model validation problem addressed is: given experimental data and a model with both additive noise and norm-bounded perturbations, is it possible that the model could produce the observed input-output data? This problem is studied for the standard H-infinity/mu framework models. A necessary condition for such a model to describe an experimental datum is obtained. For a large class of models in the robust control framework, this condition is computable as the solution of a quadratic optimization problem.

Smith, Roy S.↗
NASA NTRS1993

Thermodynamics of nickel-cadmium and nickel-hydrogen batteries

Thermodynamic parameters for Nickel-Cadmium (NiCad) and Nickel-Hydrogen (NiH2) batteries are calculated for temperatures ranging from 273.15K (0 C) to 373.15K (100 C). For both systems, we list equilibrium and thermoneutral voltages for the cells, and in the case of the NiH2 battery, these data are provide for hydrogen fugacities ranging from 0.01 to 100 (atm) to simulate the full discharged and charged states. The quality of the input thermodynamic data are assessed and the effect of assuming different cell reactions is analyzed.

Macdonald, Digby D.↗
NASA NTRS2009

Data Management Applications for the Service Preparation Subsystem

These software applications provide intuitive User Interfaces (UIs) with a consistent look and feel for interaction with, and control of, the Service Preparation Subsystem (SPS). The elements of the UIs described here are the File Manager, Mission Manager, and Log Monitor applications. All UIs provide access to add/delete/update data entities in a complex database schema without requiring technical expertise on the part of the end users. These applications allow for safe, validated, catalogued input of data. Also, the software has been designed in multiple, coherent layers to promote ease of code maintenance and reuse in addition to reducing testing and accelerating maturity.

Luong, Ivy P.↗
NASA NTRSDate not supplied

Space Launch System Artemis I Ascent Loads Reconstruction Summary

On November 16, 2022, NASA successfully launched the Space Launch System (SLS) rocket and Orion spacecraft for the first SLS mission, Artemis 1. This first flight was outfitted with Developmental Flight Instrumentation (DFI) such as accelerometers, pressure sensors, and strain gauges. The DFI supports many post-flight activities, one of which is the ascent loads reconstruction effort. The integrated vehicle ascent loads spans both boost phase and Core phase and often produces the largest loads experienced by the vehicle during flight. One of the primary goals of the ascent loads reconstruction is to evaluate applicable Coupled Loads Analysis (CLA) design math models, assumptions, and analysis methodologies. To achieve this goal, all significant ascent subevents have been reconstructed through the use of flight data, reconstructed inputs, and existing CLA simulations. Resulting responses have been compared to available flight measurements. Additionally, reconstructed subevent loads were combined and compared to appropriate flight data and pre-flight predictions.

SLS↗
NASA NTRS2006

Computing Fault Displacements from Surface Deformations

Simplex is a computer program that calculates locations and displacements of subterranean faults from data on Earth-surface deformations. The calculation involves inversion of a forward model (given a point source representing a fault, a forward model calculates the surface deformations) for displacements, and strains caused by a fault located in isotropic, elastic half-space. The inversion involves the use of nonlinear, multiparameter estimation techniques. The input surface-deformation data can be in multiple formats, with absolute or differential positioning. The input data can be derived from multiple sources, including interferometric synthetic-aperture radar, the Global Positioning System, and strain meters. Parameters can be constrained or free. Estimates can be calculated for single or multiple faults. Estimates of parameters are accompanied by reports of their covariances and uncertainties. Simplex has been tested extensively against forward models and against other means of inverting geodetic data and seismic observations. This work

Lyzenga, Gregory↗
NASA NTRS1967

Data retrieval system provides unlimited hardware design information

Data is input to magnetic tape on a single format card that specifies the system, location, and component, the test point identification number, the operators initial, the date, a data code, and the data itself. This method is efficient for large volume data storage and retrieval, and permits output variations without continuous program modifications.

Rawson, R. D.↗
NASA NTRS1978

Orbiter multiplexer-demultiplexer (MDM)/Space Lab Bus Interface Unit (SL/BIU) serial data interface evaluation, volume 2

Tests were performed to evaluate the operating characteristics of the interface between the Space Lab Bus Interface Unit (SL/BIU) and the Orbiter Multiplexer-Demultiplexer (MDM) serial data input-output (SIO) module. This volume contains the test equipment preparation procedures and a detailed description of the Nova/Input Output Processor Simulator (IOPS) software used during the data transfer tests to determine word error rates (WER).

Tobey, G. L.↗