SEARCH · Engineering Papers

Results for “impulse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Lightning location relative to storm structure in a supercell storm and a multicell storm

Relationships between lightning location and storm structure are examined for one radar volume scan in each of two mature, severe storms. One of these storms had characteristics of a supercell storm, and the other was a multicell storm. Data were analyzed from dual-Doppler radar and dual-VHF lightning-mapping systems. The distributions of VHF impulse sources were compared with radar reflectivity, vertical air velocity, and their respective gradients. In the supercell storm, lightning tended to occur along streamlines above and down-shear of the updraft and reflectivity cores; VHF impulse sources were most concentrated in reflectivities between 30 and 40 dBZ and were distributed uniformly with respect to updraft speed. In the multicell storm, on the other hand, lightning tended to coincide with the vertical reflectivity and updraft core and with the diverging streamlines near the top of the storm. The results suggest that the location of lightning in these severe storms were most directly associated with the wind field structure relative to updraft and reflectivity cores. Since the magnitude and vertical shear of the environmental wind are fundamental in determining the reflectivity and wind field structure of a storm, it is suggested that these environmental parameters are also fundamental in determining lightning location.

Ray, Peter S.↗

NASA NTRS1986

Time-dependent mixed convection heat transfer from a sphere in a micro-gravity environment

A fundamental problem of interest for crystal growth in micro-gravity applications involves the mixed convection heat transfer from a sphere in a uniform flow of fluid at a differing temperature. Under the combined influence of the imposed free stream as well as an induced buoyancy force due to thermal expansion of the fluid, the heat transfer from the sphere will be different from that of either the pure forced convection flow or the pure free convection flow. For the present study, the method of matched asymptotic expansions is applied to the laminar flow problem of an impulsively heated, impulsively started sphere in an originally quiescent fluid. Time series expansions are developed for the dependent variables by acknowledging the existence of two distinct regions: one, an inner region, near the sphere, in which viscous effects are significant; and two, an outer region in which the fluid may be treated as inviscid. The time series expansions are developed in terms of the Reynolds number and Richardson number (Buoyancy Parameter), and the relevant heat transfer and drag coefficients are calculated and plotted.

Hommel, Mark J.↗

NASA NTRS1987

Transport vehicle for manned Mars missions powered by inertial confinement fusion

Inertial confinement fusion (ICF) is an ideal engine power source for manned spacecraft to Mars because of its inherently high power-to-mass ratios and high specific impulses. In this paper a concept is produced for a vehicle powered by ICF and utilizing a magnetic thrust chamber to avoid plasma thermalization with wall structures and the resultant degradation of specific impulse, that are unavoidable with the use of mechanical thrust chambers. This vehicle is capable of 100-day manned Mars missions with a 100-metric-ton payload and a total vehicle launch mass near 6000 metric tons, based on advanced technology assumed to be available by A.D. 2020.

Orth, Charles D.↗

NASA NTRS1987

A theoretical evaluation of laser-sustained plasma thruster performance

An extensive numerical experiment has been conducted to evaluate rocket thruster performance using a laser-sustained hydrogen plasma as the propellant. The plasma was sustained using a 30 kW CO2 laser beam operated at 10.6 microns focused inside the thruster. The steady-state Navier-Stokes equations coupled with the laser power absorption process have been solved numerically. A pressure based Navier-Stokes solver using body-fitted coordinate was used to calculate the laser-supported rocket flow which included both recirculating and transonic flow regions. The local thermodynamic equilibrium (LTE) assumption was used for the plasma thermophysical and optical properties. Geometric ray tracing was adopted to describe the laser beam. Several different throat size thrusters operated at 150 and 300 kPa chamber stagnation pressure were studied. It was found that the thruster performance (vacuum specific impulse) was highly dependent on the operating conditions, and a properly designed laser supported thruster can attain a specific impulse around 1500 secs. The heat loading on the thruster wall was also estimated and was in the range of that for a conventional chemical rocket.

Jeng, San-Mou↗

NASA NTRS1987

Hydrogen scramjet with sidewall injection - Shock tunnel simulations

A free-piston shock tunnel has been used to obtain test data on a scramjet combustion chamber with sidewall injection. The results obtained indicate that combustion was strongly influenced by a region of fuel whose temperature was held below its ignition temperature by wall-cooling effects; this increased the fraction of unburned fuel and resulted in a significant loss of specific impulse. Aerodynamic heating would keep the walls above hydrogen ignition temperature in an actual scramjet powerplant, however. Maximum specific impulse was obtained with a combination of parallel and transverse injection in a long combustion chamber, followed by a dual stage expansion.

Morgan, R. G.↗

NASA NTRS1987

Results of the 1986 NASA/FAA/DFVLR main rotor test entry in the German-Dutch wind tunnel (DNW)

An acoustics test of a 40%-scale MBB BO-105 helicopter main rotor was conducted in the Deutsch-Niederlandischer Windkanal (DNW). The research, directed by NASA Langley Research Center, concentrated on the generation and radiation of broadband noise and impulsive blade-vortex interaction (BVI) noise over ranges of pertinent rotor operational envelopes. Both the broadband and BVI experimental phases are reviewed, along with highlights of major technical results. For the broadband portion, significant advancement is the demonstration of the accuracy of prediction methods being developed for broadband self noise, due to boundary layer turbulence. Another key result is the discovery of rotor blade-wake interaction (BWI) as an important contributor to mid frequency noise. Also the DNW data are used to determine for full scale helicopters the relative importance of the different discrete and broadband noise sources. For the BVI test portion, a comprehensive data base documents the BVI impulsive noise character and directionality as functions of rotor flight conditions. The directional mapping of BVI noise emitted from the advancing side as well as the retreating side of the rotor constitutes a major advancement in the understanding of this dominant discrete mechanism.

Brooks, Thomas F.↗

NASA NTRS1987

Analysis of photopole data reduction models

An analysis of the total impulse obtained from a buried explosive charge can be calculated from displacement versus time points taken from successive film frames of high speed motion pictures of the explosive event. The indicator of that motion is a pole and baseplate (photopole), which is placed on or within the soil overburden. Here, researchers are concerned with the precision of the impulse calculation and ways to improve that precision. Also examined here is the effect of each initial condition on the curve fitting process. It is shown that the zero initial velocity criteria should not be applied due to the linear acceleration versus time character of the cubic power series. The applicability of the new method to photopole data records whose early time motions are obscured is illustrated.

Cheek, James B.↗

NASA NTRS1988

Recursive inversion of externally defined linear systems

The approximate inversion of an internally unknown linear system, given by its impulse response sequence, by an inverse system having a finite impulse response, is considered. The recursive least squares procedure is shown to have an exact initialization, based on the triangular Toeplitz structure of the matrix involved. The proposed approach also suggests solutions to the problems of system identification and compensation.

Bach, Ralph E., Jr.↗

NASA NTRS1988

Advancing-side directivity and retreating-side interactions of model rotor blade-vortex interaction noise

Acoustic data are presented from a 40 percent scale model of the four-bladed BO-105 helicopter main rotor, tested in a large aerodynamic wind tunnel. Rotor blade-vortex interaction (BVI) noise data in the low-speed flight range were acquired using a traversing in-flow microphone array. Acoustic results presented are used to assess the acoustic far field of BVI noise, to map the directivity and temporal characteristics of BVI impulsive noise, and to show the existence of retreating-side BVI signals. The characterics of the acoustic radiation patterns, which can often be strongly focused, are found to be very dependent on rotor operating condition. The acoustic signals exhibit multiple blade-vortex interactions per blade with broad impulsive content at lower speeds, while at higher speeds, they exhibit fewer interactions per blade, with much sharper, higher amplitude acoustic signals. Moderate-amplitude BVI acoustic signals measured under the aft retreating quadrant of the rotor are shown to originate from the retreating side of the rotor.

Martin, R. M.↗

NASA NTRS1986

Acoustic characteristics of 1/20-scale model helicopter rotors

A wind tunnel test to study the effects of geometric scale on acoustics and to investigate the applicability of very small scale models for the study of acoustic characteristics of helicopter rotors was conducted in the United Technologies Research Center Acoustic Research Tunnel. The results show that the Reynolds number effects significantly alter the Blade-Vortex-Interaction (BVI) Noise characteristics by enhancing the lower frequency content and suppressing the higher frequency content. In the time domain this is observed as an inverted thickness noise impulse rather than the typical positive-negative impulse of BVI noise. At higher advance ratio conditions, in the absence of BVI, the 1/20 scale model acoustic trends with Mach number follow those of larger scale models. However, the 1/20 scale model acoustic trends appear to indicate stall at higher thrust and advance ratio conditions.

Shenoy, Rajarama K.↗

NASA NTRS1987

A detailed description of the uncertainty analysis for high area ratio rocket nozzle tests at the NASA Lewis Research Center

A preliminary uncertainty analysis was performed for the High Area Ratio Rocket Nozzle test program which took place at the altitude test capsule of the Rocket Engine Test Facility at the NASA Lewis Research Center. Results from the study establish the uncertainty of measured and calculated parameters required for the calculation of rocket engine specific impulse. A generalized description of the uncertainty methodology used is provided. Specific equations and a detailed description of the analysis is presented. Verification of the uncertainty analysis model was performed by comparison with results from the experimental program's data reduction code. Final results include an uncertainty for specific impulse of 1.30 percent. The largest contributors to this uncertainty were calibration errors from the test capsule pressure and thrust measurement devices.

Davidian, Kenneth J.↗

NASA NTRS1987

Experimental observations of two dimensional blade-vortex interaction

Blade-vortex interaction (BVI) is the source mechanism for a prominent impulsive noise created by rotorcraft. An experimental study of two dimensional BVI, a simplified case representing the most intense and impulsive noise generation condition, was performed to explore the fundamental physics associated with the blade-vortex interaction process. The purpose of this paper is to report cumulative results from this experimental study. The interaction process is shown to involve a combination of effects on the vortex including changes in trajectory and distortion of the vortex core shape. The blade involved undergoes significant transient loading. The effects of the interaction process on the blade and the vortex are shown to be increased by both reduction of blade-to-vortex spacing and increase in blade loading. Calculations of the acoustic field produced by the interaction using measured unsteady blade surface pressure data are presented and show acoustic waveforms similar to those obtained from model helicopter acoustic tests.

Booth, E. R., Jr.↗

NASA NTRS1987

Geometrical acoustics and transonic helicopter sound

A new method is presented for predicting the impulsive noise generated by a transonic rotor blade. The method is a combined approach involving computational fluid dynamics and geometrical acoustics. A full-potential finite-difference method is used to obtain the pressure field close to the blade. A Kirchhoff integral formulation is then used to extend these finite-difference results into the far field. This Kirchhoff formula is based on geometrical acoustics approximations. It requires initial data across a plane at the sonic radius in a blade-fixed coordinate system. This data is provided by the finite-difference solution. Acoustic pressure predictions show good agreement with hover experimental data for cases with hover tip Mach numbers of 0.88 through 0.96. The cases above 0.92 tip Mach number are dominated by non-linear transonic effects seen as strong shocks on and off the blade tip. This paper gives the first successful predictions of far-field acoustic pressures for high-speed impulsive noise over a range of Mach numbers after delocalization.

Isom, Morris↗

NASA NTRS1987

Imaging observations of the evolution of meter-decameter burst emission during a major flare

The results of a study of the evolution of the February 3, 1986 flare at meter-decameter wavelengths are presented, using the two-dimensional imaging observations made with the Clark Lake multifrequency radioheliograph. The flare was complex and produced various types of meter-decameter bursts. The preflare activity was observed in the form of type III bursts some tens of minutes prior to the impulsive onset. From the positional analysis of the preflare and impulsive phase type III bursts and other measured characteristics, the characteristics of energy release and possible magnetic field configurations in the vicinity of the energy release region are discussed. From positional and temporal studies of the flare continuum and type II burst in relation to the microwave and hard X-ray emissions, the possible magnetic field structures in which the accelerated particles are confined or along which they propagate are discussed; a schematic model of the flaring region is developed, based upon this study.

Gopalswamy, N.↗

NASA NTRS1988

Explosive plasma flows in a solar flare

Solar Maximum Mission soft X-ray data and Sacramento Peak Observatory H-alpha observations are combined in a study of the impulsive phase of a solar flare. A blue asymmetry, indicative of upflows, was observed in the coronal Ca XIX line during the soft X-ray rise phase. A red asymmetry, indicative of downflows, was observed simultaneously in chromospheric H-alpha emitted from bright flare kernels during the period of hard X-ray emission. Combining the velocity data with a measurement of coronal electron density, it is shown that the impulsive phase momentum of upflowing soft X-ray-emitting plasma equalled that of the downflowing H-alpha-emitting plasma to within one order of magnitude. In particular, the momentum of the upflowing plasma was 2 x 10 to the 21st g cm/s while that of the downflowing plasma was 7 x 10 to the 21st g cm/s, with a factor of 2 uncertainty on each value. This equality supports the explosive chromospheric evaporation model of solar flares, in which a sudden pressure increase at the footprint of a coronal loop produces oppositely directed flows in the heated plasma.

Zarro, Dominic M.↗

NASA NTRS1988

Temporal and spatial relationships between O V and Fe XXI emissions in solar flares

The temporal-spatial structure of simple solar flares observed with the Ultraviolet Spectrometer and Polarimeter of the Solar Maximum mission satellite has been studied in order to investigate the relationships between the impulsive O V and the gradual Fe XXI emissions. The point-like flares are characterized by the cotemporal evolution of the O V and Fe XXI emissions. The simple loop flares have a much larger spatial extent and show two distinctive phases: an initial impulsive phase with its emission localized in loop footpoints, and a gradual phase with its emission distributed in the loop. The temporal evolution of the Fe XXI and O V emissions in a flare is found to be closely related to its spatial structure.

Cheng, Chung-Chieh↗

NASA NTRS1988

Employing analogies for ducted MHD waves in dense coronal structures

Analogies of fast MHD waves propagating along a dense coronal structure are exploited to examine how the size and shape of the inhomogeneity affect the properties of the Love- and Pekeris-type waves. The profile's shape determines the dispersive nature of the waves. Excited impulsively, magnetic Love and Pekeris waves give rise to quasi-periodic oscillations with a duration and time scale that depend on the cross-sectional area and strength of the inhomogeneity. More diffuse coronal inhomogeneities support impulsively generated periodic oscillations, with the quasi-periodic signature being absent.

Edwin, P. M.↗

NASA NTRS1988

On the analytical treatment of impact in finite element modeling

Two simplified impact models which could be used in conjunction with finite element modeling of impacted structures are considered. The two methods are: a previously developed localized finite element impulse-momentum procedure for nondissipative impacts, and a simple gap element consisting of a parallel linear spring and damper useful in dissipative impacts. Results are presented for axial impact of an initially stationary rod. Impulse-momentum theory used in conjunction with finite element modeling was found to result in energy variations unrelated to physical behavior; these variations are reduced as the finite element model is refined.

Jeffrey, Glenda L.↗