Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high temperature superconducting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Optimization of the deposition conditions and structural characterization of Y1Ba2Cu3O(7-x) thin superconducting films

Two series of Y1Ba2Cu3O(z) thin films deposited on (001) LaAl03 single crystals by excimer laser ablation under two different protocols have been investigated. The research has yielded well defined deposition conditions in terms of oxygen partial pressure p(O2) and substrate temperature of the deposition process Th, for the growth of high quality epitaxial films of YBCO. The films grown under conditions close to optimal for both j(sub c) and T(sub c) exhibited T(sub c) greater than or equal to 91 K and j(sub c) greater than or equal to 4 x 106 A/sq cm, at 77 K. Close correlations between the structural quality of the film, the growth parameters (p(O2), T(sub h)) and j(sub c) and T(sub c) have been found.

Chrzanowski, J.↗
DOE OSTI2023

Trapped flux in pure and Mn-substituted CaKFe 4 As 4 and MgB 2 superconducting single crystals

Abstract Measurements of temperature dependent magnetization associated with trapped magnetic flux in single crystals of CaKFe 4 As 4 , CaK(Fe 0.983 Mn 0.017 ) 4 As 4 and MgB 2 using zero-field-cooled and field-cooled protocols are presented. The results allow for the determination of the values of superconducting transition temperature, lower critical field and self-field critical current density. These are compared with the literature data. Possible experimental concerns are briefly outlined. Our results, on these known superconductors at ambient pressure, are qualitatively similar to those recently measured on superhydrides at megabar pressures (Minkov et al 2023 Nat. Phys. https://doi.org/10.1038/s41567-023-02089-1 ) and, as such, hopefully serve as a baseline for the interpretation of high pressure, trapped flux measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

cm 2 -Scale Synthesis of MoTe 2 Thin Films with Large Grains and Layer Control

Owing to the small energy differences between its polymorphs, MoTe 2 can access a full spectrum of electronic states from the 2H semiconducting state to the 1T' semimetallic state and from the T d Weyl semimetallic state to the superconducting state in the 1T' and T d phase at low temperature. Thus, it is a model system for phase transformation studies as well as quantum phenomena such as the quantum spin Hall effect and topological superconductivity. Careful studies of MoTe 2 and its potential applications require large-area MoTe 2 thin films with high crystallinity and thickness control. Here, we present cm 2 -scale synthesis of 2H-MoTe 2 thin films with layer control and large grains that span several microns. Layer control is achieved by controlling the initial thickness of the precursor MoO x thin films, which are deposited on sapphire substrates by atomic layer deposition and subsequently tellurized. Despite the van der Waals epitaxy, the precursor–substrate interface is found to critically determine the uniformity in thickness and grain size of the resulting MoTe 2 films: MoTe 2 grown on sapphire show uniform films while MoTe 2 grown on amorphous SiO 2 substrates form islands. Furthermore, this synthesis strategy decouples the layer control from the variabilities of growth conditions for robust growth results and is applicable to growing other transition-metal dichalcogenides with layer control.

2D materials↗
DOE OSTI2021

Unconventional chiral charge order in kagome superconductor KV 3 Sb 5

Intertwining quantum order and non-trivial topology is at the frontier of condensed matter physics. A charge-density-wave-like order with orbital currents has been proposed for achieving the quantum anomalous Hall effect in topological materials and for the hidden phase in cuprate high-temperature superconductors. However, the experimental realization of such an order is challenging. Here we use high-resolution scanning tunnelling microscopy to discover an unconventional chiral charge order in a kagome material, KV 3 Sb 5 , with both a topological band structure and a superconducting ground state. Through both topography and spectroscopic imaging, we observe a robust 2 × 2 superlattice. Spectroscopically, an energy gap opens at the Fermi level, across which the 2 × 2 charge modulation exhibits an intensity reversal in real space, signalling charge ordering. At the impurity-pinning-free region, the strength of intrinsic charge modulations further exhibits chiral anisotropy with unusual magnetic field response. Therefore theoretical analysis of our experiments suggests a tantalizing unconventional chiral charge density wave in the frustrated kagome lattice, which can not only lead to a large anomalous Hall effect with orbital magnetism, but also be a precursor of unconventional superconductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis and electronic characterization of Nd2−xSrxNiO4 thin films (0≤x≤1.4)

Layered nickelates have been studied extensively over the last three decades due to their structural similarities to the high-Tc superconducting cuprates. Using reactive oxide molecular beam epitaxy (MBE), we synthesize Nd2−xSrxNiO4 thin films for x=0−1.4 to probe the properties and electronic structure as a function of hole doping. The samples with lower doping show semiconducting behavior across the temperatures probed with an onset of metallic conductivity at x=1.4. We also present polarization-dependent O K and Ni L2,3 x-ray absorption spectra to track the evolution of the oxygen-nickel hybridization, distribution of holes between O 2p and Ni 3d states and the nickel oxidation state across the series. Angle-resolved photoemission spectroscopy (ARPES) measurements reveal a Fermi surface that comprises a cupratelike hole pocket of dx2−y2 character with an additional electron pocket of d3z2−r2 character at Γ. The emergence of a quasiparticle peak at the Fermi vector for x=1.4 corroborates the insulator-to-metal transition at x∼1. Finally, observe a fully two-dimensional Fermi surface with no momentum-dependent pseudogap, in contrast to measurements of the related bulk compound, Eu0.9Sr1.1NiO4.

Taylor, Nicole K↗
DOE OSTI2021

Stacking-engineered ferroelectricity in bilayer boron nitride

Stacking a ferroelectric Properties of layered van der Waals structures can depend sensitively on the stacking arrangement of constituent layers. This phenomenon has been exploited to engineer superconducting, correlated insulator, and magnetic states. Two groups now show that ferroelectricity can also be engineered through stacking: Parallel-stacked bilayers of hexagonal boron nitride exhibit ferroelectric switching even though the bulk material is not ferroelectric (see the Perspective by Tsymbal). To explore these phenomena, Yasuda et al. used transport measurements, whereas Vizner Stern et al. focused on atomic force microscopy. Science , abd3230 and abe8177, this issue p. 1458 and p. 1462 ; see also abi7296, p. 1389

Science & Technology - Other Topics↗
NASA NTRS1968

Rectangular configuration improves superconducting cable

Superconducting cable for a cryogenic electromagnet with improved mechanical and thermal properties consists of a rectangular cross-sectioned combination of superconductor and normal conductor. The conductor cable has superconductors embedded in a metallic coating with high electrical and mechanical conductivity at liquid helium temperatures.

Foss, M.↗
DOE OSTI2020

Coulomb blockade effects in a topological insulator grown on a high- T c cuprate superconductor

The evidence for proximity-induced superconductivity in heterostructures of topological insulators and high- T c cuprates has been intensely debated. We use molecular-beam epitaxy to grow thin films of topological insulator Bi 2 Te 3 on a cuprate Bi 2 Sr 2 CaCu 2 O 8+x , and study the surface of Bi 2 Te 3 using low-temperature scanning tunneling microscopy and spectroscopy. In few unit-cell thick Bi 2 Te 3 films, we find a V-shaped gap-like feature at the Fermi energy in d I /d V spectra. By reducing the coverage of Bi 2 Te 3 films to create nanoscale islands, we discover that this spectral feature dramatically evolves into a much larger hard gap, which can be understood as a Coulomb blockade gap. This conclusion is supported by the evolution of d I /d V spectra with the lateral size of Bi 2 Te 3 islands, as well as by topographic measurements that show an additional barrier separating Bi 2 Te 3 and Bi 2 Sr 2 CaCu 2 O 8+x . We conclude that the prominent gap-like feature in d I /d V spectra in Bi 2 Te 3 films is not a proximity-induced superconducting gap. Instead, it can be explained by Coulomb blockade effects, which take into account additional resistive and capacitive coupling at the interface. Our experiments provide a fresh insight into the tunneling measurements of complex heterostructures with buried interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Light quantum control of persisting Higgs modes in iron-based superconductors

The Higgs mechanism, i.e., spontaneous symmetry breaking of the quantum vacuum, is a cross-disciplinary principle, universal for understanding dark energy, antimatter and quantum materials, from superconductivity to magnetism. Unlike one-band superconductors (SCs), a conceptually distinct Higgs amplitude mode can arise in multi-band, unconventional superconductors via strong interband Coulomb interaction, but is yet to be accessed. Here we discover such hybrid Higgs mode and demonstrate its quantum control by light in iron-based high-temperature SCs. Using terahertz (THz) two-pulse coherent spectroscopy, we observe a tunable amplitude mode coherent oscillation of the complex order parameter from coupled lower and upper bands. The nonlinear dependence of the hybrid Higgs mode on the THz driving fields is distinct from any known SC results: we observe a large reversible modulation of resonance strength, yet with a persisting mode frequency. Together with quantum kinetic modeling of a hybrid Higgs mechanism, distinct from charge-density fluctuations and without invoking phonons or disorder, our result provides compelling evidence for a light-controlled coupling between the electron and hole amplitude modes assisted by strong interband quantum entanglement. Such light-control of Higgs hybridization can be extended to probe many-body entanglement and hidden symmetries in other complex systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1993

TlCaBaCuO high Tc superconducting microstrip ring resonators designed for 12 GHz

Microwave properties of sputtered Tl-Ca-Ba-Cu-O thin films were investigated by designing, fabricating, and testing microstrip ring resonators. Ring resonators designed for 12 GHz fundamental resonance frequency, were fabricated and tested. From the unloaded Q values for the resonators, the surface resistance was calculated by separating the conductor losses from the total losses. The penetration depth was obtained from the temperature dependence of resonance frequency, assuming that the shift in resonance frequency is mainly due to the temperature dependence of penetration depth. The effective surface resistance at 12 GHz and 77 K was determined to be between 1.5 and 2.75 mOmega, almost an order lower than Cu at the same temperature and frequency. The effective penetration depth at 0 K is approximately 7000 A.

Subramanyam, G.↗
DOE OSTI2022

Strongly correlated itinerant magnetism near superconductivity in NiTa 4 Se 8

Metallic ferromagnets with strongly interacting electrons often exhibit remarkable electronic phases such as ferromagnetic superconductivity, complex spin textures, and nontrivial topology. Here, in this report, we discuss the synthesis of a layered magnetic metal NiTa 4 Se 8 (or Ni 1/4 TaSe 2 ) with a Curie temperature of 58 Kelvin. Magnetization data and density functional theory calculations indicate that the nickel atoms host uniaxial ferromagnetic order of about 0.7µ B per atom, while an even smaller moment is generated in the itinerant tantalum conduction electrons. Strong correlations are evident in flat bands near the Fermi level, a high heat capacity coefficient, and a high Kadowaki-Woods ratio. Density functional theory calculations suggest that electron and hole Fermi surfaces in the ferromagnetic phase are associated with opposite spin polarization. When the system is diluted of magnetic ions, the samples become superconducting below about 2 Kelvin. We discuss possible mechanisms for superconductivity in this family.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2019

Photonic Band Gap Properties of One-dimensional Generalized Fibonacci Photonic Quasicrystal Containing Superconductor Material

In this work, we theoretically investigate the transmission properties of one-dimensional (1D) Fibonacci photonic quasicrystal (PQC) by using the transfer matrix modeling (TMM) method. The PQC structure is composed of alternated layers of isotropic dielectric (SiO{sub 2}) and a high-T{sub c} superconductor (YBCO). Frequency-dependent dispersion formula according to the two-fluid Gorter–Casimir theory has been adopted to describe the optical response of the superconducting material. Within the framework of the TMM method, we studied the effect of many parameters such as the thicknesses of the dielectric and superconductor layers, Fibonacci lattice parameters, and the operating temperature on the transmission behaviors of the PQC structure. Our numerical results reveal the transmission cutoff frequency can be tuned efficiently by the operating temperature as well as by the thicknesses of the constituent materials. We found that increasing the temperature and the angle of incidence, maintaining materials thicknesses constant, there is a shift of the cutoff frequency to lower frequency values. Nevertheless, this cutoff frequency is shifted to higher values with increasing the superconductor layer thickness. Moreover, we found that the width and the number of the photonic bandgaps can be controlled by order of Fibonacci sequence. Our results are promising for the design of tunable filtering devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Novel Experimental Approach to Obtain the Oxygen-Deficient LaBaCaCu{sub 3}O{sub y} Superconductor Compound

This work presents a novel approach based on the nitrate decomposition method for the preparation the oxygen-deficient LaBaCaCu{sub 3}O{sub y} (La1113) compound. The XRD results reveal the presence of the triple perovskite structure LaBaCaCu{sub 3}O{sub y} as a dominant phase crystallizing in the tetragonal system with the space group P4/mmm. The SEM observation shows a low porosity and EDAX data indicates the presence of the basic elements of the phase. The superconducting character of the compound is confirmed by AC susceptibility measurements with T{sub c} = 63 K even if the samples are not treated under oxygen atmosphere.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Single-Layer Dititanium Oxide Ti 2 O MOene: Multifunctional Promises for Electride, Anode Materials, and Superconductor

Using the first-principles calculations, we report the existence of the single-layer (SL) dititanium oxide Ti 2 O (labeled as MOene) that constructs a novel family of MXene based on transition-metal oxides. This MOene material strongly contrasts the conventional ones consisting of transition-metal carbides and/or nitrides. SL Ti 2 O has high thermal and dynamical stabilities because of the strong Ti–O ionic bonding interactions. Moreover, this material is an intrinsic electride and exhibits extremely low diffusion barriers of ~12.0 and 6.3 meV for Li and Na diffusion, respectively. When applied as anode materials in lithium-ion batteries and sodium-ion batteries, it possesses a high energy storage capacity (960.23 mAhg –1 ), surpassing the traditional MXenes-based anodes. The superb electrochemical performance stems from the existing anionic electron on Ti 2 O surface. Astonishingly, SL Ti 2 O is also determined to be a superconductor with a superconducting transition temperature (T c ) of ~9.8 K, which originates from the soft-mode of the first acoustic phonon branch and enhanced electron–phonon coupling in the low-frequency region. Furthermore, this soft-mode behaves much softer upon applying a compressive strain of 2%, leading to a higher T c of 11.9 K. Furthermore, our finding broadens the family of MXenes and could facilitate more experimental efforts toward future nanodevices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Three-dimensional Fermi surface and small effective masses in Mo 8 Ga 41

We report Fermi surface characteristics of Mo 8 Ga 41 , a two-gap superconductor with critical temperature T c ~10 K, obtained from quantum oscillation measurements. Four major frequencies have been observed with relatively small quastiparticle masses. Angular dependence of major frequencies indicates three-dimensional Fermi surface sheets. This argues for a relatively isotropic superconducting state and, given its relatively high T c , shows that a search for new materials in this class could be of interest for superconducting wire applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Magnetic anisotropy and entropy change in trigonal Cr 5 Te 8

We present a comprehensive investigation of the anisotropic magnetic and magnetocaloric properties of quasi-two-dimensional weak itinerant ferromagnet trigonal Cr 5 Te 8 single crystals. Magnetic-anisotropy-induced satellite transition T * is observed at low fields applied parallel to the ab plane below the Curie temperature ( T c ~ 230K). T * is featured by an anomalous magnetization downturn, similar to that in structurally related CrI 3 , which possibly stems from an in-plane antiferromagnetic alignment induced by out-of-plane ferromagnetic spins canting. Magnetocrystalline anisotropy is also reflected in magnetic entropy change Δ S M ( T , H ) and relative cooling power. Furthermore, given the high Curie temperature, Cr 5 Te 8 crystals are materials of interest for nanofabrication in basic science and applied technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Quench Protection Study of Superconducting Magnets for the Materials Plasma Exposure Experiment

To advance the understanding of plasma material interactions, the Material Plasma Exposure eXperiment (MPEX) is a new linear plasma device that will generate and deliver plasma relevant to future fusion reactor divertors. The operation of MPEX is planned to be steady-state in order to facilitate high fluence exposures of plasma facing materials and components. The desire for steady-state operation along with the magnetic field requires the utilization of superconducting coils. The superconducting magnet system for MPEX has been developed. The baseline model has six superconducting magnet and one room-temperature magnet subsystems. In order to protect multiple superconducting magnet systems, quench analysis was carried out to determine the best protection approach for each magnet type. Because the mutual inductance accounts for approximately 35% of the stored energy in the entire system, this must be considered when determining the peak voltages and temperatures during a quench. Two approaches for passive quench protection are considered: (1) self-protecting magnets and (2) use of diodes to sub-divide the coils. For both approaches, active quench detection will be used to ensure all coils are de-energized in the event of a quench. Results of the quench analysis for several quench scenarios are presented.

Burkhardt, Earle↗