Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Work Towards Experimental Evidence Of Hard X-Ray Photoionization In Highly Charged Krypton

Ions of almost any charge state can be produced through electron-impact ionization. Here we describe our first experiments designed to photoionize these highly charged ions with hard x-rays by pairing an electron and photon beam. A spectral line at 12.7(1) keV with an intensity corroborated by theory may be the first evidence of hard x-ray photoionization of a highly charged ion.

74 ATOMIC AND MOLECULAR PHYSICS↗

A high temperature apparatus for measurement of the Seebeck coefficient

A high temperature Seebeck coefficient measurement apparatus with various features to minimize typical sources of error is designed and built. Common sources of temperature and voltage measurement error are described and principles to overcome these are proposed. With these guiding principles, a high temperature Seebeck measurement apparatus with a uniaxial 4-point contact geometry is designed to operate from room temperature to over 1200 K. This instrument design is simple to operate, and suitable for bulk samples with a broad range of physical types and shapes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A high temperature high pressure cell for quasielastic neutron scattering

We present our recent development of a high temperature high pressure cell for neutron scattering. Combining a water cooled Nb1Zr pressure cell body with an internal heating furnace, the sample environment can reach temperatures of up to 1500 K at a pressure of up to 200 MPa at the sample position, with an available sample volume of about 700 mm{sup 3}. The cell material Nb1Zr is specifically chosen due to its reasonable mechanical strength at elevated temperatures and fairly small neutron absorption and incoherent scattering cross sections. With this design, an acceptable signal-to-noise ratio of about 10:1 can be achieved. This opens new possibilities for quasielastic neutron scattering studies on different types of neutron spectrometers under high temperature high pressure conditions, which is particularly interesting for geological research on, e.g., water dynamics in silicate melts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hard x-ray monochromator with milli-electron volt bandwidth for high-resolution diffraction studies of diamond crystals

We report on design and performance of a high-resolution x-ray monochromator with a spectral bandwidth of {Delta}E{sub X}{approx_equal} 1.5 meV, which operates at x-ray energies in the vicinity of the backscattering (Bragg) energy E{sub H} = 13.903 keV of the (008) reflection in diamond. The monochromator is utilized for high-energy-resolution diffraction characterization of diamond crystals as elements of advanced x-ray crystal optics for synchrotrons and x-ray free-electron lasers. The monochromator and the related controls are made portable such that they can be installed and operated at any appropriate synchrotron beamline equipped with a pre-monochromator.

43 PARTICLE ACCELERATORS↗

Simultaneous structure and elastic wave velocity measurement of SiO[subscript 2] glass at high pressures and high temperatures in a Paris-Edinburgh cell

An integration of multi-angle energy-dispersive x-ray diffraction and ultrasonic elastic wave velocity measurements in a Paris-Edinburgh cell enabled us to simultaneously investigate the structures and elastic wave velocities of amorphous materials at high pressure and high temperature conditions. We report the first simultaneous structure and elastic wave velocity measurement for SiO{sub 2} glass at pressures up to 6.8 GPa at around 500 C. The first sharp diffraction peak (FSDP) in the structure factor S(Q) evidently shifted to higher Q with increasing pressure, reflecting the shrinking of intermediate-range order, while the Si-O bond distance was almost unchanged up to 6.8 GPa. In correlation with the shift of FSDP position, compressional wave velocity (Vp) and Poisson's ratio increased markedly with increasing pressure. In contrast, shear wave velocity (Vs) changed only at pressures below 4 GPa, and then remained unchanged at {approx}4.0-6.8 GPa. These observations indicate a strong correlation between the intermediate range order variations and Vp or Poisson's ratio, but a complicated behavior for Vs. The result demonstrates a new capability of simultaneous measurement of structures and elastic wave velocities at high pressure and high temperature conditions to provide direct link between microscopic structure and macroscopic elastic properties of amorphous materials.

47 OTHER INSTRUMENTATION↗

R and D toward a compact high-brilliance X-ray source based on channeling radiation

X-rays have been valuable to a large number of fields including Science, Medicine, and Security. Yet, the availability of a compact high-spectral brilliance X-ray sources is limited. A technique to produce X-rays with spectral brilliance B{approx} 10{sup 12} photons.(mm-mrd){sup -2}. (0.1% BW){sup -1}.s{sup -1} is discussed. The method is based on the generation and acceleration of a low-emittance field-emitted electron bunches. The bunches are then focused on a diamond crystal thereby producing channeling radiation. In this paper, after presenting the overarching concept, we discuss the generation, acceleration and transport of the low-emittance bunches with parameters consistent with the production of high-brilliance X-rays through channeling radiation. We especially consider the example of the Advanced Superconducting Test Accelerator (ASTA) currently in construction at Fermilab where a proof-of-principle experiment is in preparation.

43 PARTICLE ACCELERATORS↗

High-resolution and high-sensitivity phase-contrast imaging by focused hard x-ray ptychography with a spatial filter

We demonstrate high-resolution and high-sensitivity x-ray phase-contrast imaging of a weakly scattering extended object by scanning coherent diffractive imaging, i.e., ptychography, using a focused x-ray beam with a spatial filter. We develop the x-ray illumination optics installed with the spatial filter to collect coherent diffraction patterns with a high signal-to-noise ratio. We quantitatively visualize the object with a slight phase shift ({approx}{lambda}/320) at spatial resolution better than 17 nm in a field of view larger than {approx}2 Multiplication-Sign 2{mu}m{sup 2}. The present coherent method has a marked potential for high-resolution and wide-field-of-view observation of weakly scattering objects such as biological soft tissues.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Designing high power targets with computational fluid dynamics (CFD)

High power liquid hydrogen (LH2) targets, up to 850 W, have been widely used at Jefferson Lab for the 6 GeV physics program. The typical luminosity loss of a 20 cm long LH2 target was 20% for a beam current of 100 μA rastered on a square of side 2 mm on the target. The 35 cm long, 2500 W LH2 target for the Qweak experiment had a luminosity loss of 0.8% at 180 μA beam rastered on a square of side 4 mm at the target. The Qweak target was the highest power liquid hydrogen target in the world and with the lowest noise figure. The Qweak target was the first one designed with CFD at Jefferson Lab. A CFD facility is being established at Jefferson Lab to design, build and test a new generation of low noise high power targets.

43 PARTICLE ACCELERATORS↗

The high-energy-density counterpropagating shear experiment and turbulent self-heating

The counterpropagating shear experiment has previously demonstrated the ability to create regions of shock-driven shear, balanced symmetrically in pressure, and experiencing minimal net drift. This allows for the creation of a high-Mach-number high-energy-density shear environment. New data from the counterpropagating shear campaign is presented, and both hydrocode modeling and theoretical analysis in the context of a Reynolds-averaged-Navier-Stokes model suggest turbulent dissipation of energy from the supersonic flow bounding the layer is a significant driver in its expansion. A theoretical minimum shear flow Mach number threshold is suggested for substantial thermal-turbulence coupling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High efficiency off-axis current drive by high frequency fast waves

Modeling work shows that current drive can be done off-axis with high efficiency, as required for FNSF and DEMO, by using very high harmonic fast waves (“helicons” or “whistlers”). The modeling indicates that plasmas with high electron beta are needed in order for the current drive to take place off-axis, making DIII-D a highly suitable test vehicle for this process. The calculations show that the driven current is not very sensitive to the launched value of n{sub ∥}, a result that can be understood from examination of the evolution of n{sub ∥} as the waves propagate in the plasma. Because of this insensitivity, relatively large values (∼3) of n{sub ∥} can be launched, thereby avoiding some of the problems with mode conversion in the boundary found in some previous experiments. Use of a traveling wave antenna provides a very narrow n{sub ∥} spectrum, which also helps avoid mode conversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High thermoelectric performance in the multi-valley electronic system Zr{sub 3}Ni{sub 3−x}Co{sub x}Sb{sub 4} and the high-mobility Zr{sub 3}Ni{sub 3−x}Cu{sub x}Sb{sub 4}

We report synthesis and thermoelectric performance of the p-type Zr{sub 3}Ni{sub 3−x}Co{sub x}Sb{sub 4} and the n-type Zr{sub 3}Ni{sub 3−x}Cu{sub x}Sb{sub 4}, which are derived from the same parent semiconductor Zr{sub 3}Ni{sub 3}Sb{sub 4}. We found a high thermoelectric performance for both the p-type compound (the figure-of-merit ZT is 0.52 at 760 K) and the n-type compound (ZT = 0.41 at 670 K). ZT of the p-type compound exceeded the value of the p-type half-Heusler compounds consisting of similar elements. The Hall-coefficient measurements indicate that the high ZT in the n-type compounds is a consequence of the high electron mobility of 52.4 cm{sup 2}/Vs. In contrast, the p-type compounds showed higher ZT in spite of much lower mobility. We discuss the mechanism for the high ZT in the p-type compound from the viewpoint of the multi-valley band structure.

36 MATERIALS SCIENCE↗

Note: Efficient generation of optical sidebands at GHz with a high-power tapered amplifier

Two methods using a laser-diode tapered amplifier to produce high-power, high-efficiency optical frequency sidebands over a wide tunable frequency range are studied and compared. For a total output of 500 mW at 811 nm, 20% of the power can be placed in each of the first-order sidebands. Functionality and characterization are presented within the sideband frequency region of 0.8–2.3 GHz, and it is shown that both methods can be applied beyond this frequency range. These methods provide a versatile and effective tool for atomic physics experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High temperature measurement using very high shutter speed to avoid image saturation

This paper explores the adaptation of the two-colour principle to develop a high-speed colour temperature correlation system, which is able to cover a range of temperature that is challenging to achieve before. A colour digital camera has built in RGB filters. It is possible to measure the temperature from the ratio of intensity of the green and red pixels using the two-colour principle based on the expansion of the Plank’s radiation law. In this study, experiments were carried out using a temperature calibrated tungsten ribbon lamp which can be tuned to vary from 1300 to 2200°C. Using very high shutter speed and small aperture, the high-speed camera successfully captured the tungsten ribbon without image saturation at the full temperature scale. Tests have been carried out at different temperature and camera settings. The sensitivity and errors have been analysed, and experiment results demonstrate the potential of using very high shutter speed is available for measuring the temperature even beyond 2200°C.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High performance TiN gate contact on AlGaN/GaN transistor using a mechanically strain induced P-doping

High performance titanium nitride sub-100 nm rectifying contact, deposited by sputtering on AlGaN/GaN high electron mobility transistors, shows a reverse leakage current as low as 38 pA/mm at V{sub GS} = −40 V and a Schottky barrier height of 0.95 eV. Based on structural characterization and 3D simulations, it is found that the polarization gradient induced by the gate metallization forms a P-type pseudo-doping region under the gate between the tensile surface and the compressively strained bulk AlGaN barrier layer. The strain induced by the gate metallization can compensate for the piezoelectric component. As a result, the gate contact can operate at temperatures as high as 700 °C and can withstand a large reverse bias of up to −100 V, which is interesting for high-performance transistors dedicated to power applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental verification of the high pressure crystal structures in NH{sub 3}BH{sub 3}

A detailed high-pressure study on NH{sub 3}BH{sub 3} has been carried out using in situ synchrotron X-ray diffraction (XRD) and Raman scattering with a diamond anvil cell up to 20 and 33 GPa, respectively. The Rietveld refinement based on the XRD pattern and analysis of Raman data indicate two first-order phase transitions from the ambient pressure I4 mm structure (α-NH{sub 3}BH{sub 3}) to a high pressure Cmc2{sub 1} phase (β-NH{sub 3}BH{sub 3}) at 2.14 GPa, and further into a monoclinic P2{sub 1} (Z = 2) phase (γ-NH{sub 3}BH{sub 3}) at 9.67 GPa. Fitting the measured volumetric compression data to the third order Birch-Murnaghan equation of state reveals a bulk modulus of B{sub 0} = 9.9 ± 0.5 and 17.0 ± 3.0 GPa (with fixed B{sub 0}{sup ′} = 4) for the β-NH{sub 3}BH{sub 3} below and above 5 GPa, respectively. Still, with the splitting of the NBH rock mode in Raman experiment, it is concluded that a second-order isostructural phase transition occurs at 5 GPa. By analyzing the dihydrogen bonding framework, the origin of the isostructural phase transition is attributed to the number of dihydrogen bondings per molecule in the Cmc2{sub 1} phase increasing from 12 to 14 at 5 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

C-H surface diamond field effect transistors for high temperature (400 °C) and high voltage (500 V) operation

By forming a highly stable Al{sub 2}O{sub 3} gate oxide on a C-H bonded channel of diamond, high-temperature, and high-voltage metal-oxide-semiconductor field-effect transistor (MOSFET) has been realized. From room temperature to 400 °C (673 K), the variation of maximum drain-current is within 30% at a given gate bias. The maximum breakdown voltage (V{sub B}) of the MOSFET without a field plate is 600 V at a gate-drain distance (L{sub GD}) of 7 μm. We fabricated some MOSFETs for which V{sub B}/L{sub GD} > 100 V/μm. These values are comparable to those of lateral SiC or GaN FETs. The Al{sub 2}O{sub 3} was deposited on the C-H surface by atomic layer deposition (ALD) at 450 °C using H{sub 2}O as an oxidant. The ALD at relatively high temperature results in stable p-type conduction and FET operation at 400 °C in vacuum. The drain current density and transconductance normalized by the gate width are almost constant from room temperature to 400 °C in vacuum and are about 10 times higher than those of boron-doped diamond FETs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equations of state of ice VI and ice VII at high pressure and high temperature

High-pressure H{sub 2}O polymorphs among which ice VI and ice VII are abundant in the interiors of large icy satellites and exo-planets. Knowledge of the elastic properties of these pure H{sub 2}O ices at high-temperature and high-pressure is thus crucial to decipher the internal structure of icy bodies. In this study we assess for the first time the pressure-volume-temperature (PVT) relations of both polycrystalline pure ice VI and ice VII at high pressures and temperatures from 1 to 9 GPa and 300 to 450 K, respectively, by using in situ synchrotron X-ray diffraction. The PVT data are adjusted to a second-order Birch-Murnaghan equation of state and give V{sub 0} = 14.17(2) cm{sup 3} mol{sup −1}, K{sub 0} = 14.05(23) GPa, and α{sub 0} = 14.6(14) × 10{sup −5} K{sup −1} for ice VI and V{sub 0} = 12.49(1) cm{sup 3} mol{sup −1}, K{sub 0} = 20.15(16) GPa, and α{sub 0} = 11.6(5) × 10{sup −5} K{sup −1} for ice VII.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An interface facet driven Rayleigh instability in high-aspect-ratio bimetallic nanolayered composites

One limitation hindering the structural and electrical applications of nanostructured metals is the loss of their nanostructure and strength under elevated temperatures. Nanostructured metals often have grain structures that contain a high density of triple junctions, where thermally induced instabilities commonly initiate. Prior work has resulted in fabrication of nanolayered two-phase composites that possess high-aspect ratio grains, a scarcity of triple junctions, and a thermally stable microstructure. In this work, transmission electron microscopy is used to investigate how these composites could eventually breakdown during heating. We reveal an unconventional thermal instability mechanism in this class of materials, which operates without the assistance of triple junctions. The mechanism can be rationalized by that thermally induced pinch off occurs as the result of bimetal interface faceting and can trigger a classic Rayleigh instability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗