Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractional diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Structural and electrophysical properties of In{sub 0.52}Al{sub 0.48}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As/InP HEMT nanoheterostructures with different combinations of InAs and GaAs inserts in quantum well

A complex investigation of structural and electrical properties of In{sub 0.52}Al{sub 0.48}As/In{sub y}Ga{sub 1−y}As/In{sub 0.52}Al{sub 0.48}As nanoheterostructures on InP substrates containing thin InAs and GaAs inserts in a quantum well (QW) has been performed. The GaAs nanolayers are grown at the QW boundaries between InGaAs and InAlAs layers, while the double InAs inserts are grown in InGaAs layers symmetrically with respect to the QW center. The layer and interface structures have been studied by transmission electron microscopy. It is shown that, when using the proposed epitaxial growth conditions, the introduction of ∼1.2-nm-thick InAs nanoinserts into the InGaAs QW and a ∼1-nm-thick GaAs nanobarrier at the QW boundaries does not induce structural defects. The diffusion of the InAlAs/InGaAs interface (2–3 monolayers) and InAs/InGaAs nanoinsert interface (1–2 monolayers) has been estimated. Measured Hall mobilities and electron concentrations in structures with different combinations of InAs and GaAs inserts have been analyzed using calculated energy band diagrams and electron density distributions. It is found that the photoluminescence spectra of the structures under study have differences caused by specific structural features of coupled QWs (specifically, the change in the In molar fraction due to InAs inserts and the change in the QW thickness due to GaAs transition barriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The ionization of the diffuse ionized gas

The diffuse ionized gas (DIG), responsible for producing the faint but pervasive H(sub alpha), requires 15% of the power of all Galactic O stars for its ionization. No other source of ionization seems practical. The spectrum is strong in low stages of ionization (N II, SII), weak in (O III), and very weak in (O I) lambda 6300, at least in one well-observed direction, all significantly different from denser H II regions. We give low-density, low-excitation photoionization models that explain the observed spectrum. The lambda 6300 observation eliminates the simplest models for the DIG (Mathis 1986), in which neutral H extends beyond the edge of the very dilute stellar radiation field. Our present models include two components. One, representing the edges of interstellar H I clouds, extends to the point where H becomes neutral. In the second, the fraction of H(sup o) is not allowed to exceed 0.05 to 0.1. Both have very low values of the ionization parameter, or ratio of the number densities of ionizing photons to electrons. The ionization parameter required by our models is shown to be compatible with observed values of photon and electron densities in the diffuse interstellar medium. Interstellar dust is not important in either model. Predictions of the model are that the Galaxy is leaking about 4% of the ionizing radiation of at least the local O stars into the intergalactic medium, that (O II) lambda 3727 approximately equals 1.1 H(sub alpha), and that He(sup +)/H (sup +)) approximately equals 0.6 He/H. A major difficul ty of this picture is having ionizing radiation propagate from the ionizing stars in the plane of the Galaxy to the DIG. We suggest, as do Miller & Cox (1993), that the ionizing radiation from O stars produces holes or tunnels in the distribution of neutral H as seen from their positions, while we see a sky covered with H I sheets or filaments because we are not near a source of ionizing radiation. With our models, several interfaces between ionized and neutral gas are allowed before the observational limit on lambda 6300 is exceeded. Another difficulty is the gas-phase N(S(sup +))/N(H(sup o)) ratio toward the high-latitude star HD 93521 (Spitzer & Fitzpatrick 1993). We require (S/H) to be somewhat lower than solar, either because of depletion onto grains or a Galactic abundance gradient, so that the S(sup +) can be produced in each of separate H(sup o) and H(sup +) regions.

Domgorgen, H.↗

Cosmic ray anisotropy as signature for the transition from galactic to extragalactic cosmic rays

We constrain the energy at which the transition from Galactic to extragalactic cosmic rays occurs by computing the anisotropy at Earth of cosmic rays emitted by Galactic sources. Since the diffusion approximation starts to loose its validity for E/Z∼>10{sup 16−17} eV, we propagate individual cosmic rays using Galactic magnetic field models and taking into account both their regular and turbulent components. The turbulent field is generated on a nested grid which allows spatial resolution down to fractions of a parsec. Assuming sufficiently frequent Galactic CR sources, the dipole amplitude computed for a mostly light or intermediate primary composition exceeds the dipole bounds measured by the Auger collaboration around E ≈ 10{sup 18} eV. Therefore, a transition at the ankle or above would require a heavy composition or a rather extreme Galactic magnetic field with strength ∼>10 μG. Moreover, the fast rising proton contribution suggested by KASCADE-Grande data between 10{sup 17} eV and 10{sup 18} eV should be of extragalactic origin. In case heavy nuclei dominate the flux at E∼>10{sup 18} eV, the transition energy can be close to the ankle, if Galactic CRs are produced by sufficiently frequent transients as e.g. magnetars.

79 ASTRONOMY AND ASTROPHYSICS↗

A model for the oxidative pyrolysis of wood

A generalized pyrolysis model (Gpyro) is applied to simulate the oxidative pyrolysis of white pine slabs irradiated under nonflaming conditions. Conservation equations for gaseous and solid mass, energy, species, and gaseous momentum (Darcy's law approximation) inside the decomposing solid are solved to calculate profiles of temperature, mass fractions, and pressure inside the decomposing wood. The condensed phase consists of four species, and the gas that fills the voids inside the decomposing solid consists of seven species. Four heterogeneous (gas/solid) reactions and two homogeneous (gas/gas) reactions are included. Diffusion of oxygen from the ambient into the decomposing solid and its effect on local reactions occurring therein is explicitly modeled. A genetic algorithm is used to extract the required material properties from experimental data at 25 kW/m{sup 2} and 40 kW/m{sup 2} irradiance and ambient oxygen concentrations of 0%, 10.5% and 21% by volume. Optimized model calculations for mass loss rate, surface temperature, and in-depth temperatures reproduce well the experimental data, including the experimentally observed increase in temperature and mass loss rate with increasing oxygen concentration. (author)

09 BIOMASS FUELS↗

Numerical approach of the injection molding process of fiber-reinforced composite with considering fiber orientation

One of the most important challenges in the injection molding process of the short-glass fiber/thermoplastic composite parts is being able to predict the fiber orientation, since it controls the mechanical and the physical properties of the final parts. Folgar and Tucker included into the Jeffery equation a diffusive type of term, which introduces a phenomenological coefficient for modeling the randomizing effect of the mechanical interactions between the fibers, to predict the fiber orientation in concentrated suspensions. Their experiments indicated that this coefficient depends on the fiber volume fraction and aspect ratio. However, a definition of the fiber interaction coefficient, which is very necessary in the fiber orientation simulations, hasn't still been proven yet. Consequently, this study proposed a developed fiber interaction model that has been introduced a fiber dynamics simulation in order to obtain a global fiber interaction coefficient. This supposed that the coefficient is a sum function of the fiber concentration, aspect ratio, and angular velocity. The proposed model was incorporated into a computer aided engineering simulation package C-Mold. Short-glass fiber/polyamide-6 composites were produced in the injection molding with the fiber weight concentration of 30 wt.%, 50 wt.%, and 70 wt.%. The physical properties of these composites were examined, and their fiber orientation distributions were measured by micro-computed-tomography equipment μ-CT. The simulation results showed a good agreement with experiment results.

36 MATERIALS SCIENCE↗

Novel challenges in tracking self-interacting dark matter subhalos

Cosmological N-body simulations are among the primary tools for studying structure formation in the Universe. Analyses of these simulations critically depend on accurately identifying and tracking dark matter subhalos over time. In recent years, several new algorithms have been developed to improve the accuracy and consistency of subhalo tracking in cold dark matter (CDM) simulations. These algorithms should be revisited in the context of new physics beyond gravity, which can modify the evolution and final properties of subhalo populations. In this work, we apply the particle-tracking-based subhalo finder Symfind to velocity-dependent self-interacting dark matter (SIDM) simulations with large cross section amplitudes to assess the performance of particle-tracking methods beyond the CDM paradigm. We find that the core-particle-tracking technique, which is key to the success of these algorithms in CDM, does not always yield accurate results in SIDM. In particular, the interplay between dark matter self-interactions and tidal stripping can cause the diffusion of core particles to larger radii, leading particle-tracking-based algorithms to prematurely lose track of SIDM subhalos. For massive core-expansion subhalos and core-collapse subhalos that experience close or repeated pericentric passages, a significant fraction of core particles can be lost, and particle-tracking-based finders such as Symfind offer no clear advantage over traditional methods that rely on identifying phase-space overdensities. On the other hand, for subhalos with large pericentric distances or fewer, more distant passages, Symfind tends to outperform. These differences depend sensitively on the cross section amplitude and turnover velocity of the underlying SIDM model. We therefore recommend a hybrid approach that leverages the strengths of both techniques to produce complete and robust catalogs of core-expansion and core-collapse SIDM subhalos.

cosmological simulations↗

Partitioning of Nanoparticles into Organic Phases and Model Cells

There is a recognized need to understand and predict the fate, transport and bioavailability of engineered nanoparticles (ENPs) in aquatic and soil ecosystems. Recent research focuses on either collection of empirical data (e.g., removal of a specific NP through water or soil matrices under variable experimental conditions) or precise NP characterization (e.g. size, degree of aggregation, morphology, zeta potential, purity, surface chemistry, and stability). However, it is almost impossible to transition from these precise measurements to models suitable to assess the NP behavior in the environment with complex and heterogeneous matrices. For decades, the USEPA has developed and applies basic partitioning parameters (e.g., octanol-water partition coefficients) and models (e.g., EPI Suite, ECOSAR) to predict the environmental fate, bioavailability, and toxicity of organic pollutants (e.g., pesticides, hydrocarbons, etc.). In this project we have investigated the hypothesis that NP partition coefficients between water and organic phases (octanol or lipid bilayer) is highly dependent on their physiochemical properties, aggregation, and presence of natural constituents in aquatic environments (salts, natural organic matter), which may impact their partitioning into biological matrices (bioaccumulation) and human exposure (bioavailability) as well as the eventual usage in modeling the fate and bioavailability of ENPs. In this report, we use the terminology "partitioning" to operationally define the fraction of ENPs distributed among different phases. The mechanisms leading to this partitioning probably involve both chemical force interactions (hydrophobic association, hydrogen bonding, ligand exchange, etc.) and physical forces that bring the ENPs in close contact with the phase interfaces (diffusion, electrostatic interactions, mixing turbulence, etc.). Our work focuses on partitioning, but also provides insight into the relative behavior of ENPs as either "more like dissolved substances" or "more like colloids" as the division between behaviors of macromolecules versus colloids remains ill-defined. Below we detail our work on two broadly defined objectives: (i) Partitioning of ENP into octanol, lipid bilayer, and water, and (ii) disruption of lipid bilayers by ENPs. We have found that the partitioning of NP reaches pseudo-equilibrium distributions between water and organic phases. The equilibrium partitioning most strongly depends on the particle surface charge, which leads us to the conclusion that electrostatic interactions are critical to understanding the fate of NP in the environment. We also show that the kinetic rate at which particle partition is a function of their size (small particles partition faster by number) as can be predicted from simple DLVO models. We have found that particle number density is the most effective dosimetry to present our results and provide quantitative comparison across experiments and experimental platforms. Cumulatively, our work shows that lipid bilayers are a more effective organic phase than octanol because of the definable surface area and ease of interpretation of the results. Our early comparison of NP partitioning between water and lipids suggest that this measurement can be predictive of bioaccumulation in aquatic organisms. We have shown that nanoparticle disrupt lipid bilayer membranes and detail how NP-bilayer interaction leads to the malfunction of lipid bilayers in regulating the fluxes of ionic charges and molecules. Our results show that the disruption of the lipid membranes is similar to that of toxin melittin, except single particles can disrupt a bilayer. We show that only a single particle is required to disrupt a 150 nm DOPC liposome. The equilibrium leakage of membranes is a function of the particle number density and particle surface charge, consistent with results from our partitioning experiments. Our disruption experiments with varying surface functionality show that positively charged particles (poly amine) are most disruptive, consistent with in in vitro toxicity panels using cell cultures. Overall, this project has resulted in 8 published or submitted archival papers and has been presented 12 times. We have trained five students and provided growth opportunities for a postdoc.

54 ENVIRONMENTAL SCIENCES↗

Radar observations of the icy Galilean satellites

It is shown that when combined with previous observations, 12.6 cm radar observations of Europa, Ganymede and Callisto made at the Arecibo Observatory in November 1977 and February 1979 firmly establish the distinguishing radar properties of the satellites: (1) high geometric albedos, (2) circular polarization ratios which anomalously exceed unity, (3) linear polarization ratios of approximately 0.5, and (4) diffuse scattering, which varies with the cosine of the angle of incidence. The weighted-mean values of these properties are tabulated, and it is found that although significant albedo and/or polarization features are common in the radar spectra, the fractional root mean square fluctuations in disk-integrated properties is only about 10%.

Ostro, S. J.↗

Electric thruster research

It has been customary to assume that ions flow nearly equally in all directions from the ion production region within an electron-bombardment discharge chamber. In general, the electron current through a magnetic field can alter the electron density, and hence the ion density, in such a way that ions tend to be directed away from the region bounded by the magnetic field. When this mechanism is understood, it becomes evident that many past discharge chamber designs have operated with a preferentially directed flow of ions. Thermal losses were calculated for an oxide-free hollow cathode. At low electron emissions, the total of the radiation and conduction losses agreed with the total discharge power. At higher emissions, though, the plasma collisions external to the cathode constituted an increasingly greater fraction of the discharge power. Experimental performance of a Hall-current thruster was adversely affected by nonuniformities in the magnetic field, produced by the cathode heating current. The technology of closed-drift thrusters was reviewed. The experimental electron diffusion in the acceleration channel was found to be within about a factor of 3 of the Bohm value for the better thruster designs at most operating conditions. Thruster efficiencies of about 0.5 appear practical for the 1000 to 2000 s range of specific impulse. Lifetime information is limited, but values of several thousands of hours should be possible with anode layer thrusters operated or = to 2000 s.

Kaufman, H. R.↗

On recontamination and directional-bias problems in Monte Carlo simulation of PDF turbulence models

Turbulent combustion can not be simulated adequately by conventional moment closure turbulent models. The probability density function (PDF) method offers an attractive alternative: in a PDF model, the chemical source terms are closed and do not require additional models. Because the number of computational operations grows only linearly in the Monte Carlo scheme, it is chosen over finite differencing schemes. A grid dependent Monte Carlo scheme following J.Y. Chen and W. Kollmann has been studied in the present work. It was found that in order to conserve the mass fractions absolutely, one needs to add further restrictions to the scheme, namely alpha(sub j) + gamma(sub j) = alpha(sub j - 1) + gamma(sub j + 1). A new algorithm was devised that satisfied this restriction in the case of pure diffusion or uniform flow problems. Using examples, it is shown that absolute conservation can be achieved. Although for non-uniform flows absolute conservation seems impossible, the present scheme has reduced the error considerably.

Hsu, Andrew T.↗

Numerical modeling of flame-balls in fuel-air mixtures

At low gravity, when buoyancy effects are small, flame-balls can be generated. These are stationary spherical structures whose existence appears to require a near-limit mixture, a small Lewis number and heat losses from radiation. It is our goal to combine computational modeling with existing experimental and theoretical studies (NASA) of these structures so that an improved understanding of flammability limits and near-limit phenomena will occur. The question of flammability limits is of fundamental importance and has long been examined. It is of great practical importance to predict, from first principles, a limit mixture strength that agrees with experimental values for the configuration at hand. Flame-balls provide an excellent configuration in which convective losses can be eliminated and the resulting stable solutions are produced from a diffusive, reactive and radiative balance. Although analytical modeling provides convincing evidence that the key physical ingredients of flame-balls have been identified, quantitative confirmation can only come from detailed numerical simulations. Our goal is to predict theoretically the mass fractions of the species and the temperature as functions of the independent coordinate r.

Smooke, Mitchell D.↗

Molecular dynamics simulations of ionic aggregates in a coarse%3CU%2B2010%3Egrained ionomer melt.

Ionomers--polymers containing a small fraction of covalently bound ionic groups--have potential application as solid electrolytes in batteries. Understanding ion transport in ionomers is essential for such applications. Due to strong electrostatic interactions in these materials, the ions form aggregates, tending to slow counterion diffusion. A key question is how ionomer properties affect ionic aggregation and counterion dynamics on a molecular level. Recent experimental advances have allowed synthesis and extensive characterization of ionomers with a precise, constant spacing of charged groups, making them ideal for controlled measurement and more direct comparison with molecular simulation. We have used coarse-grained molecular dynamics to simulate such ionomers with regularly spaced charged beads. The charged beads are placed either in the polymer backbone or as pendants on the backbone. The polymers, along with the counterions, are simulated at melt densities. The ionic aggregate structure was determined as a function of the dielectric constant, spacing of the charged beads on the polymer, and the sizes of the charged beads and counterions. The pendant ion architecture can yield qualitatively different aggregate structures from those of the linear polymers. For small pendant ions, roughly spherical aggregates have been found above the glass transition temperature. The implications of these aggregates for ion diffusion will be discussed.

36 MATERIALS SCIENCE↗

Radiological and Clinical Pneumonitis After Stereotactic Lung Radiotherapy: A Matched Analysis of Three-Dimensional Conformal and Volumetric-modulated Arc Therapy Techniques

Purpose: Lung fibrosis is common after stereotactic body radiotherapy (SBRT) for lung tumors, but the influence of treatment technique on rates of clinical and radiological pneumonitis is not well described. After implementing volumetric modulated arc therapy (RapidArc [RA]; Varian Medical Systems, Palo Alto, CA) for SBRT, we scored the early pulmonary changes seen with arc and conventional three-dimensional SBRT (3D-CRT). Methods and Materials: Twenty-five SBRT patients treated with RA were matched 1:2 with 50 SBRT patients treated with 3D-CRT. Dose fractionations were based on a risk-adapted strategy. Clinical pneumonitis was scored using Common Terminology Criteria for Adverse Events version 3.0. Acute radiological changes 3 months posttreatment were scored by three blinded observers. Relationships among treatment type, baseline factors, and outcomes were assessed using Spearman's correlation, Cochran-Mantel-Haenszel tests, and logistic regression. Results: The RA and 3D-CRT groups were well matched. Forty-three patients (57%) had radiological pneumonitis 3 months after treatment. Twenty-eight patients (37%) had computed tomography (CT) findings of patchy or diffuse consolidation, and 15 patients (20%) had ground-glass opacities only. Clinical pneumonitis was uncommon, and no differences were seen between 3D-CRT vs. RA patients in rates of grade 2/3 clinical pneumonitis (6% vs. 4%, respectively; p = 0.99), moderate/severe radiological changes (24% vs. 36%, respectively, p = 0.28), or patterns of CT changes (p = 0.47). Radiological severity scores were associated with larger planning target volumes (p = 0.09) and extended fractionation (p = 0.03). Conclusions: Radiological changes after lung SBRT are common with both approaches, but no differences in early clinical or radiological findings were observed after RA. Longer follow-up will be required to exclude late changes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

NMR spin relaxation in proteins: The patterns of motion that dissipate power to the bath

We developed in recent years the two-body coupled-rotator slowly relaxing local structure (SRLS) approach for the analysis of NMR relaxation in proteins. The two bodies/rotators are the protein (diffusion tensor D{sub 1}) and the spin-bearing probe, e.g., the {sup 15}N−{sup 1}H bond (diffusion tensor, D{sub 2}), coupled by a local potential (u). A Smoluchowski equation is solved to yield the generic time correlation functions (TCFs), which are sums of weighted exponentials (eigenmodes). By Fourier transformation one obtains the generic spectral density functions (SDFs) which underlie the experimental relaxation parameters. The typical paradigm is to characterize structural dynamics in terms of the best-fit values of D{sub 1}, D{sub 2}, and u. Additional approaches we pursued employ the SRLS TCFs, SDFs, or eigenmodes as descriptors. In this study we develop yet another perspective. We consider the SDF as function of the angular velocity associated with the fluctuating fields underlying NMR relaxation. A parameter called j-fraction, which represents the relative contribution of eigenmode, i, to a given value of the SDF function at a specific frequency, ω, is defined. j-fraction profiles of the dominant eigenmodes are derived for 0 ≤ ω ≤ 10{sup 12} rad/s. They reveal which patterns of motion actuate power dissipation at given ω-values, what are their rates, and what is their relative contribution. Simulations are carried out to determine the effect of timescale separation, D{sub 1}/D{sub 2}, axial potential strength, and local diffusion axiality. For D{sub 1}/D{sub 2} ≤ 0.01 and strong local potential of 15 k{sub B}T, power is dissipated by global diffusion, renormalized (by the strong potential) local diffusion, and probe diffusion on the surface of a cone (to be called cone diffusion). For D{sub 1}/D{sub 2} = 0.1, power is dissipated by mixed eigenmodes largely of a global-diffusion-type or cone-diffusion-type, and a nearly bare renormalized-local-diffusion eigenmode. For D{sub 1}/D{sub 2} > 0.1, most eigenmodes are of a mixed type. The analysis is affected substantially by reducing the potential strength from 15 to 5 k{sub B}T, and/or allowing for axial D{sub 2} with D{sub 2,∥}/D{sub 2,⊥} = 10. The scheme developed is applied to {sup 15}N−{sup 1}H relaxation from the β-sheet residue K19 and the α-helix residue A34 of the third immunoglobulin-binding domain of streptococcal protein G. Previous studies revealed rhombic local potentials with different rhombicity around C{sub i−1}{sup α}−C{sub i}{sup α}, and different timescale separation (0.047 for K19 and 0.102 for A34). Here, we find that K19 and A34 dissipate power to the bath through global diffusion, mixed cone-diffusion-related and mixed renormalized-local-diffusion-related motions. At small ω-values, A34 is more effective than K19 in dissipating power. In general, it executes faster cone-diffusion-type, and slower renormalized-local-diffusion-type and local-probe-fluctuation-type motions. K19 experiences faster N−H fluctuations than A34. Eigenmode clustering, experienced by K19 to a larger extent, is observed in the fast-probe-fluctuation regime. New information on the effect of the structural context on N−H bond dynamics has been obtained. The patterns of motion that dissipate NMR-relaxation-related power illuminate protein dynamics from a new perspective. They constitute yet another qualifier of N−H bond dynamics. This study sets the stage for developing ways for enhancing the contribution of desired pathways for power dissipation at selected angular velocities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical Modeling Studies of The Dissolution-Diffusion-Convection ProcessDuring CO2 Storage in Saline Aquifers

For purposes of geologic storage, CO2 would be injected into saline formations at supercritical temperature and pressure conditions, and would form a separate phase that is immiscible with the aqueous phase (brine). At typical subsurface temperature and pressure conditions, supercritical CO2 (scCO2) has lower density than the aqueous phase and would experience an upward buoyancy force. Accordingly, the CO2 is expected to accumulate beneath the caprock at the top of the permeable interval, and could escape from the storage formation wherever (sub-)vertical pathways are available, such as fractures or faults through the caprock, or improperly abandoned wells. Over time, an increasing fraction of CO2 may dissolve in the aqueous phase, and eventually some of the aqueous CO2 may react with rock minerals to form poorly soluble carbonates. Dissolution into the aqueous phase and eventual sequestration as carbonates are highly desirable processes as they would increase permanence and security of storage. Dissolution of CO2 will establish phase equilibrium locally between the overlying CO2 plume and the aqueous phase beneath. If the aqueous phase were immobile, CO2 dissolution would be limited by the rate at which molecular diffusion can remove dissolved CO2 from the interface between CO2-rich and aqueous phases. This is a slow process. However, dissolution of CO2 is accompanied by a small increase in the density of the aqueous phase, creating a negative buoyancy force that can give rise to downward convection of CO2-rich brine, which in turn can greatly accelerate CO2 dissolution. This study explores the process of dissolution-diffusion-convection (DDC), using high-resolution numerical simulation. We find that geometric features of convection patterns are very sensitive to small changes in problem specifications, reflecting self-enhancing feedbacks and the chaotic nature of the process. Total CO2 dissolution rates on the other hand are found to be quite robust against modest changes in problem parameters, and are essentially constant as long as no dissolved CO2 reaches the lower boundary of the system.

54 ENVIRONMENTAL SCIENCES↗

On propagators of nonlocal relativistic diffusion of galactic cosmic rays

This report discusses a new model of cosmic ray propagation in the Galaxy. In contrast to the known models based on the principles of Brownian motion, the proposed model agrees with the relativistic principle of speed limitation and takes into account the large-scale turbulence of the interstellar medium, justifying introduction of fractional differential operators.

79 ASTRONOMY AND ASTROPHYSICS↗

Blowing in the Wind: II. Creation and Redistribution of Refractory Inclusions in a Turbulent Protoplanetary Nebula

Ca-A1 rich refractory mineral inclusions (CAIs) found at 1-6% mass fraction in primitive chondrites appear to be 1-3 million years older than the dominant (chondrule) components which were accreted into the same parent bodies. A prevalent concern is that it is difficult to retain CAIs for this long against gas-drag-induced radial drift into the sun. We reassess the situation in terms of a hot inner (turbulent) nebula context for CAI formation, using analytical models of nebula evolution and particle diffusion. We show that outward radial diffusion in a weakly turbulent nebula can overwhelm inward drift, and prevent significant numbers of CAI-size particles from being lost into the sun for times on the order of 10(exp 6) years. CAIs can form early, when the inner nebula was hot, and persist in sufficient abundance to be incorporated into primitive planetesimals at a much later time. Small (less than or approximately 0.1 mm diameter) CAIs persist for longer times than large (greater than or approximately 5mm diameter ones. To obtain a quantitative match to the observed volume fractions of CAIs in chondrites, another process must be allowed for: a substantial enhancement of the inner hot nebula in silicate-forming material, which we suggest was caused by rapid inward drift of meter-sized objects. This early in nebula history, the drifting rubble would have a carbon content probably an order of magnitude larger than even the most primitive (CI) carbonaceous chondrites. Abundant carbon in the evaporating material would help keep the nebula oxygen fugacity low, plausibly solar; as inferred for the formation environment of CAIs. The associated production of a larger than canonical amount of CO2 might also play a role in mass-independent fractionation of oxygen isotopes, leaving the gas rich in O-16 as inferred from CAIs and other high temperature condensates.

Cuzzi, Jeffrey N.↗