Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Phase field modeling of discontinuous dynamic recrystallization in hot deformation of magnesium alloys

We have developed a quantitative phase field model of discontinuous dynamic recrystallization (PF-DDRX) for investigating grain structure evolution and its impact on mechanical response in magnesium alloy during hot deformation. A set of isothermal compression tests were conducted by Gleeble thermo-mechanical simulator and used to determine PF-DDRX model parameters such as critical stresses of recrystallization, activation energies of dislocation, grain boundaries and recrystallization grain nucleation. In the simulations, the experimentally measured average grain size and distribution were used to generate initial microstructures. The results show that the typical ‘necklace’ microstructures observed in DDRX forms at the earlier stage of recrystallization. The inhomogeneity of microstructures first increases rapidly and then decreases gradually and reaches a constant with the increase of dynamic recrystallization volume fraction. Both predicted grain structure and mechanical response are in good agreement with experimental results. This demonstrates that the model parameters determined by experimental data are reliable for the developed PF-DDRX model to predict the grain structure evolution and flow behavior of AZ80 magnesium alloy under hot deformation. This work presents a path to combine experiments and modeling to give quantitative prediction and minimize experimental cost.

magnesium alloy, Phase field method, dynamic recry↗
DOE OSTI2022

Investigation of γ - ( U , Z r ) structural properties and its interfacial properties with liquid sodium using ab initio molecular dynamics

In this study, the elastic properties, structural parameters, sound velocity, and Debye temperature of γ–(U,Zr) were computed using ab initio molecular dynamics (AIMD) at temperatures between 1000 K and 1400 K and for Zr content between 0 at. % and 100 at. %. UZr is used as a metallic fuel for Sodium Fast Reactors (SFRs). The study of the mechanical and thermal behavior of these alloys leads to a better data-informed fuel design. The bulk modulus, shear modulus, Young's modulus, and Poisson's ratio were calculated from the elastic constants and their dependence on Zr content and temperature was investigated, comparing the results with previous computational work and the available experimental data in the literature. Interfacial properties between UZr (up to 32 at. % which typically exists in nuclear fuel) and liquid sodium are also of interest due to the presence of a sodium bond between the fuel and the cladding in metallic nuclear fuel. The interfacial energy between γ–(U,Zr) and liquid sodium, the surface tension of liquid sodium, and the work of adhesion were computed at different temperatures and Zr concentrations. It was demonstrated that γ–(U,Zr) is completely wetted by liquid sodium at all the investigated temperatures and Zr concentrations. Finally, this work provides the basis for the determination of interfacial resistances in SFRs and their implementation into heat transfer fuel performance simulations, which will be the subject of future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Toward Realistic Models of the Electrocatalytic Oxygen Evolution Reaction

The electrocatalytic oxygen evolution reaction (OER) supplies the protons and electrons needed to transform renewable electricity into chemicals and fuels. However, the OER is kinetically sluggish; it operates at significant rates only when the applied potential far exceeds the reversible voltage. The origin of this overpotential is hidden in a complex mechanism involving multiple electron transfers and chemical bond making/breaking steps. Our desire to improve catalytic performance has then made mechanistic studies of the OER an area of major scientific inquiry, though the complexity of the reaction has made understanding difficult. While historically, mechanistic studies have relied solely on experiment and phenomenological models, over the past twenty years ab initio simulation has been playing an increasingly important role in developing our understanding of the electrocatalytic OER and its reaction mechanisms. In this Review we cover advances in our mechanistic understanding of the OER, organized by increasing complexity in the way through which the OER is modeled. We begin with phenomenological models built using experimental data before reviewing early efforts to incorporate ab initio methods into mechanistic studies. We go on to cover how the assumptions in these early ab initio simulations-no electric field, electrolyte, or explicit kinetics-have been relaxed. Through comparison with experimental literature, we explore the veracity of these different assumptions. We summarize by discussing the most critical open challenges in developing models to understand the mechanisms of the OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Oxygen Defect Configurations in Single-Phase UO 2.15

Hyperstoichiometric UO 2.15 was characterized by neutron total scattering at high temperature in the single-phase UO 2+x region of the U/O phase diagram. The diffraction data confirmed a single-phase fluorite structure at high temperature. Analysis of the short-range data showed that the same structural model does not fit the pair distribution functions well. Instead, structural models containing specific configurations of oxygen defect clusters best represent the local atomic arrangement. In conclusion, prevalent defect clusters previously proposed were fit to the experimental data, and moderately distorted oxygen cuboctahedra hypothesized by recent molecular dynamics simulations fit the data most accurately.

neutron pair-distribution function analysis↗
DOE OSTI2020

Strength of porous α-SiO 2 in a shock loaded environment: Calibration via Richtmyer–Meshkov instability and validation via Mach lens

The strength of brittle porous media is of concern in numerous applications, for example, earth penetration, crater formation, and blast loading. Thus, it is of importance to possess techniques that allow for constitutive model calibration within the laboratory setting. The goal of the current work is to demonstrate an experimental technique allowing for strength assessment of porous media subjected to shock loading, which can be implemented into pressure-dependent yield surfaces within numerical simulation schemes. As a case study, the deviatoric response of distended α-SiO 2 has been captured in a tamped Richtmyer–Meshkov instability (RMI) environment at a pressure regime of 4–10 GPa. Hydrocode simulations were used to interpret RMI experimental data, and a resulting pressure-dependent yield surface akin to the often employed modified Drucker–Prager model was calibrated. Simulations indicate that the resulting jet length generated by the RMI is sensitive to the porous media strength, thereby providing a feasible experimental platform capable of capturing the pressurized granular deviatoric response. Furthermore, in efforts to validate the RMI-calibrated strength model, a set of Mach-lens experiments was performed and simulated with the calibrated pressure-dependent yield surface. Excellent agreement between the resulting Mach-lens length in experiment and simulation provides additional confidence to the RMI yield-surface calibration scheme.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Double-pion electroproduction off protons in deuterium: Quasifree cross sections and final-state interactions

Here, the single-differential and fully integrated cross sections for quasi-free $π^+π^-$ electroproduction off protons bound in deuterium have been extracted for the first time. The experimental data were collected at Jefferson Laboratory with the CLAS detector. The measurements were performed in the kinematic region of the invariant mass W from 1.3 GeV to 1.825 GeV and photon virtuality Q 2 from 0.4 GeV2 to 1.0 GeV 2 . Sufficient experimental statistics allow for narrow binning in all kinematic variables, while maintaining a small statistical uncertainty. The extracted cross sections were compared with the corresponding cross sections off free protons, which allowed us to obtain an estimate of the contribution from events in which interactions between the final-state hadrons and the spectator neutron took place.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Electromagnetic and two-photon transition form factors of the pseudoscalar mesons: An algebraic model computation

We compute electromagnetic and two-photon transition form factors of ground-state pseudoscalar mesons: π , K , η c , η b . To this end, we employ an algebraic model based upon the coupled formalism of Schwinger-Dyson and Bethe-Salpeter equations. Within this approach, the dressed quark propagator and the relevant Bethe-Salpeter amplitude encode the internal structure of the corresponding meson. Electromagnetic properties of the meson are probed via the quark-photon interaction. The algebraic model employed by us unifies the treatment of all ground-state pseudoscalar mesons. Its parameters are carefully fitted performing a global analysis of existing experimental data including the knowledge of the charge radii of the mesons studied. We then compute and predict electromagnetic and two-photon transition form factors for a wide range of probing photon momentum-squared which is of direct relevance to the experimental observations carried out thus far or planned at different hadron physics facilities such as the Thomas Jefferson National Accelerator Facility (JLab) and the forthcoming Electron-Ion Collider. We also present comparisons with other theoretical models and approaches and lattice quantum chromodynamics. Published by the American Physical Society 2024

Higuera-Angulo, I. M. (ORCID:0000000256008875)↗
DOE OSTI2020

Physically Based Modeling of PEMFC Cathode Catalyst Layers: Effective Microstructure and Ionomer Structure–Property Relationship Impacts

Abstract This work presents a pseudo-two-dimensional proton exchange membrane fuel cell (PEMFC) model incorporating Nafion ionomer structure–property relationships in the cathode catalyst layer (CL) to capture and explain losses at low Pt loading. Structural data from neutron reflectometry and thin film Nafion conductivity measurements predict variations in the oxygen diffusion coefficient and ionic conductivity with changing CL ionomer thickness and Pt loading. By including these structure–property relationships, predicted polarization curves agree closely with previously published experimental data from cells with Pt loadings between 0.025 and 0.2 mg/cm2. Results demonstrate that structure–property relationships based on physically measurable ionomer and CL properties provide a feasible interpretation of PEMFC CL phenomena for a range of Pt loadings and help explain previously unaccounted-for losses at low Pt. Results also show that simulations must account for surface species coverage variations in order to properly capture the kinetic losses. Finally, results suggest that an increase in ionomer thickness surrounding the C/Pt surfaces may lead to improved cell performance due to improved ionic conductivity.

Electrochemistry↗
DOE OSTI2020

Beam Hardening Artifact Reduction in X-Ray CT Reconstruction of 3D Printed Metal Parts Leveraging Deep Learning and CAD Models

Nondestructive evaluation (NDE) of additively manufactured (AM) parts is important for understanding the impacts of various process parameters and qualifying the built part. X-ray computed tomography (XCT) has played a critical role in rapid NDE and characterization of AM parts. However, XCT of metal AM parts can be challenging because of artifacts produced by standard reconstruction algorithms as a result of a confounding effect called “beam hardening.” Beam hardening artifacts complicate the analysis of XCT images and adversely impact the process of detecting defects, such as pores and cracks, which is key to ensuring the quality of the parts being printed. In this work, we propose a novel framework based on using available computer-aided design (CAD) models for parts to be manufactured, accurate XCT simulations, and a deep-neural network to produce high-quality XCT reconstructions from data that are affected by noise and beam hardening. Using extensive experiments with simulated data sets, we demonstrate that our method can significantly improve the reconstruction quality, thereby enabling better detection of defects compared with the state of the art. We also present promising preliminary results of applying the deep networks trained using CAD models to experimental data obtained from XCT of an AM jet-engine turbine blade.

Ziabari, Amir↗
DOE OSTI2020

Computationally efficient evaluation of optimum homogeneous charge compression ignition operating range with accelerated multizone engine cycle simulation

The very intensive calculations necessary to define a performance map requiring evaluation of over a hundred individual operating points can be efficiently conducted with accelerated multizone for engine cycle simulation, leading to a definition of regions of acceptable and optimum homogeneous charge compression ignition operation. Accelerated multizone for engine cycle simulation has the virtue of enabling accurate evaluation of many operating conditions based on thermal stratification data from a single fluid mechanics run at motored conditions. This is possible because thermal stratification is more sensitive to engine geometry than to operating conditions. In this article, accuracy of accelerated multizone for engine cycle simulation is demonstrated by comparison with experimental data for iso-octane homogeneous charge compression ignition operation over a broad range of lean equivalence ratios (0.14–0.28). The validated accelerated multizone for engine cycle simulation model is then applied to generating a performance map for an engine controlled by appropriately adjusting equivalence ratio and internal exhaust gas recirculation. Regions of acceptable and optimum combustion are identified. It is finally demonstrated that while indicated mean effective pressure remains low for optimum homogeneous charge compression ignition operation (1–4 bar), this is sufficient for a large fraction of typical driving in light-duty vehicles. Much driving including idle can therefore be done in homogeneous charge compression ignition mode at high efficiency and low (essentially zero) NOx and particulate matter emissions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Preliminary Design of Engineering-Scale Salt Accident Analysis Facility to Support Molten Salt Reactor Licensing

Systems-level nuclear accident analysis codes for reactor licensing must be validated using experimental data that represent behaviors expected during actual full-scale accidents. Some behaviors may arise from coupled processes and only manifest at large scales. This report presents the preliminary design of the Salt Accident Analysis Facility (SAAF, pronounced “safe”), which is an experimental test facility to be constructed at Argonne that can be used to conduct integrated salt accident tests at an engineering scale. The measurement capabilities of the SAAF are based on previously developed methods and will provide the representative datasets that are needed to support molten salt reactor (MSR) licensing. Details of the design, the processes to be quantified, the measurement techniques for quantifying the processes, the variables that can be adjusted to simulate different accident scenarios, and operational considerations are presented herein. This report provides stakeholders the opportunity to give feedback on the test facility capabilities and planned analyses before it is constructed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

The AXEAP2 program for K β X-ray emission spectra analysis using artificial intelligence

The processing and analysis of synchrotron data can be a complex task, requiring specialized expertise and knowledge. Our previous work addressed the challenge of X-ray emission spectrum (XES) data processing by developing a standalone application using unsupervised machine learning. However, the task of analyzing the processed spectra remains another challenge. Although the non-resonant K β XES of 3 d transition metals are known to provide electronic structure information such as oxidation and spin state, finding appropriate parameters to match experimental data is a time-consuming and labor-intensive process. Here, a new XES data analysis method based on the genetic algorithm is demonstrated, applying it to Mn, Co and Ni oxides. This approach is also implemented as a standalone application, Argonne X-ray Emission Analysis 2 ( AXEAP2 ), which finds a set of parameters that result in a high-quality fit of the experimental spectrum with minimal intervention. AXEAP2 is able to find a set of parameters that reproduce the experimental spectrum, and provide insights into the 3 d electron spin state, 3 d –3 p electron exchange force and K β emission core-hole lifetime.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Controls on Barite (BaSO 4 ) Precipitation in Unconventional Reservoirs

Barite (BaSO 4 ) precipitation is one of the most ubiquitous examples of secondary sulfate mineral scaling in shale oil and gas reservoirs. Often, a suite of chemical additives is used during fracturing operations to inhibit the accumulation of mineral scales, though their efficacy is widely varied and poorly understood. This study combines experimental data and multi-component numerical reactive transport modeling to offer a more comprehensive understanding of the geochemical behavior of barite accumulation in shale matrices under conditions typical of fracturing operations. A variety of additives and conditions are individually tested in batch reactor experiments to identify the factors controlling barite precipitation. Our experimental results demonstrate a pH dependence in the rate of barite precipitation, which we use to develop a predictive model including a pH-dependent term that satisfactorily reproduces our observations. Further, this model is then extended to consider the behavior of three major shale samples of highly variable mineralogy (Eagle Ford, Marcellus, and Barnett). This data-validated model offers a reliable tool to predict and ultimately mitigate against secondary mineral accumulation in unconventional shale reservoirs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Unpacking model inadequacy: The quantification of silver release from TRISO fuel by considering empirical and mechanistic approaches

Increasing adoption of the proposed tristructural isotropic (TRISO) particle fuel for both advanced and existing reactors makes it critical to assess and address any uncertainties and inadequacies of TRISO fission product release models. Model inadequacy stems from simplifications made to the computational model when compared to the experiments. The modeling and simulation efforts conducted using the BISON fuel performance code, along with the experimental campaigns carried out under the Advanced Gas Reactor Fuel Development and Qualification Program, afford a unique opportunity to conduct a rigorous modeling inadequacy assessment within the Bayesian uncertainty quantification (UQ) framework. Here, this study compares the standard Bayesian framework against the Kennedy-O'Hagan (KOH) framework, which explicitly represents modeling inadequacy, in regard to UQ for TRISO silver release models. For this purpose, both the traditional Arrhenius equation fitted to experimental data and the more advanced lower-length-scale (LLS)-informed model, which considers microstructure information, are independently considered. Applying the inverse UQ process on the AGR-2 and -3/4 datasets revealed modeling inadequacy to be the most dominant source of uncertainty. Experimental noise uncertainty is also significant; however, model parameter uncertainty can be considered negligible. Interestingly, both the Arrhenius equation and the LLS-informed model demonstrated similar levels of modeling inadequacy. For the forward predictive UQ, the KOH framework improved both the accuracy and quality of quantified uncertainties in comparison to the standard Bayesian framework. This is true for both the Arrhenius equation and the LLS-informed model. In comparing these modeling approaches, both demonstrated similar performance at the engineering scale, while the LLS-informed model expectedly outperformed the Arrhenius equation at the mesoscale. These conclusions highlight the importance of explicitly accounting for modeling inadequacy in the UQ process, and reinforce the need for continuous refinement of physics-based models in order to address the modeling inadequacy.

Advanced reactors↗
DOE OSTI2025

Detecting thermodynamic phase transition via explainable machine learning of photoemission spectroscopy

Identifying thermodynamic signatures of electronic phases, such as superconductivity, is challenging in low-dimensional materials due to strong fluctuations and low probing volume. Spectroscopic methods are often used to identify new bulk phases, but their main measurable quantity—electronic energy gaps—is no longer an effective order parameter in low-dimensional and fluctuating systems. Combining angle-resolved photoemission with a domain-adversarial neural network, we report a data-driven method to identify thermodynamic phase transitions solely based on single-particle spectra. We demonstrate 97.6% accuracy in cuprate superconductor Bi 2 Sr 2 CaCu 2 O 8+δ with strong superconducting fluctuations. This model notably compensates for the scarcity of experimental data by leveraging virtually inexhaustible simulated data. Further, its explainability reveals the crucial role of in-gap spectral weight in detecting phase fluctuations and thermodynamic transitions. Our work pinpoints the spectroscopic signatures of fluctuating orders and enables using spectroscopy for machine-learning-assisted material discovery for low-dimensional and strong coupling systems.

2D materials↗
DOE OSTI2020

Recreating Giants Impacts in the Laboratory: Shock Compression of MgSiO 3 Bridgmanite to 14 Mbar

Understanding giant impacts requires accurate description of how extreme pressures and temperatures affect the physical properties of the constituent materials. Here, we report shock experiments on two polymorphs of MgSiO 3 : enstatite and bridgmanite (perovskite) crystals.We obtain pressure-density shock equation of state to 14 Mbar and more than 9 g/cm 3 , a 40% increase in density from previous data on MgSiO 3 . Density-functional-theory molecular dynamics (DFT-MD) simulations provide predictions for the shock Hugoniot curves for bridgmanite and enstatite and suggest that the Grüneisen parameter decreases with increasing density. The good agreement between the simulations and the experimental data, including for the shock temperature along the enstatite Hugoniot reveals that DFT-MD simulations reproduce well the behavior of dense fluid MgSiO 3 .We also reveal a high optical reflectance indicative of a metal-like electrical conductivity which supports the hypothesis that magma oceans may contribute to planetary magnetic field generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Morphological descriptors of nanoparticles: The link between atomistic structures and x-ray absorption spectra

Understanding and quantifying the morphology of nanoparticles are essential for linking their atomic structure to diverse applications and verifying theoretical models. While experimental information on the structure of nanoparticles in the size range below ∼5 nm can be extracted from x-ray absorption spectroscopy using a small number of descriptors—most commonly coordination numbers—developing an understanding of morphology descriptors from experimental data remains a challenge. Here, in this study, we introduce NanoGene, a genetic algorithm-based method for generating structurally diverse nanoparticle models guided by user-defined descriptors. We establish correlations among structural, size-related, and morphological descriptors and demonstrate how experimentally accessible parameters, such as coordination numbers, can be leveraged to infer otherwise inaccessible ones, such as the generalized coordination number or particle oblateness. Principal component and clustering analyses reveal the relative importance of descriptors, with the number of atoms emerging as a key discriminant of the nanoparticle structure. By providing both the methodology and an extensive dataset of nanoparticle geometries, this work offers a practical foundation for descriptor-based analysis and interpretation of experimental observations, bridging the gap between local atomic coordinates and global morphological characterization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

High-Fidelity Modeling and Experiments to Inform Safety Analysis Codes for Heat Pipe Microreactors

Heat pipe microreactors are reactor designs that primarily use liquid-metal heat pipes to cool the core. The main interest in heat pipes is the fact that they can remove heat passively. This, along with the use of liquid metal, allows the reactor to operate at higher temperatures. Although the use of heat pipes in nuclear reactors is new, liquid-metal heat pipe technology is mature. Nevertheless, experimental data on heat pipes are scarce, and very little is known about their behavior during abnormal operations and close to their thermal limits. Therefore, new experiments and accurate heat pipe simulations are needed to develop reliable closure models. This work describes a joint experimental and numerical investigation into heat pipes that attempts an initial closure of this gap. Further, the numerical and experimental efforts are currently proceeding in parallel, aimed at different aspects of heat pipes. The numerical part is focused on gaps in local closures, and the experiments capture the overall heat pipe behavior.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗