Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ethane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Not all fugitives are bad: The case for using them to form low tortuosity - high porosity electrodes

This work focuses on the inclusion of an insoluble fugitive phase during slurry processing to form composite battery electrodes. The fugitive phases consist of natural derived products like alginic acid, sucrose, rice and potato starch, and carrageenans such as Irish Moss and synthetic pore-formers based on polymethyl methacrylate. The fugitive phases can be anaerobically thermally removed (350 °C) during binder crosslinking and electrode drying steps, resulting in electrodes with low tortuosities (approaching theoretical Bruggemann limits for spherical particles) and high porosities approaching 80%. The resulting ∼3 mg/cm 2 loaded electrodes suffer from poor electrical connectivity, lowering the effective material utilization, but represent an approach that could be utilized for the formation of solid-state batteries with infilling of materials into well-defined pores and optimized transport pathways.

25 ENERGY STORAGE↗
DOE OSTI2017

Testing the robustness of optimal access vessel fleet selection for operation and maintenance of offshore wind farms

Optimising the operation and maintenance (O&M) and logistics strategy of offshore wind farms implies the decision problem of selecting the vessel fleet for O&M. Different strategic decision support tools can be applied to this problem, but much uncertainty remains regarding both input data and modelling assumptions. Our paper aims to investigate and ultimately reduce this uncertainty by comparing four simulation tools, one mathematical optimisation tool and one analytic spreadsheet-based tool applied to select the O&M access vessel fleet that minimizes the total O&M cost of a reference wind farm. The comparison shows that the tools generally agree on the optimal vessel fleet, but only partially agree on the relative ranking of the different vessel fleets in terms of total O&M cost. The robustness of the vessel fleet selection to various input data assumptions was tested, and the ranking was found to be particularly sensitive to the vessels' limiting significant wave height for turbine access. Also the parameter with the greatest discrepancy between the tools, implies that accurate quantification and modelling of this parameter is crucial. The ranking is moderately sensitive to turbine failure rates and vessel day rates but less sensitive to electricity price and vessel transit speed.

17 WIND ENERGY↗
DOE OSTI2023

Mono-material product design with bio-based, circular, and biodegradable polymers

The traditional multi-material product design of plastic products significantly complicates both existing and emerging recycling processes. Here, we discuss the concept of mono-material product design, which is based on circular and biodegradable polymers made of a single monomer, delivering tailorable properties via molecular or macromolecular engineering without changing its chemical makeup or composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Recent advances in combustion science related to hydrogen safety

Hydrogen is a key pillar in the global Net Zero strategy. Rapid scaling up of hydrogen production, transport, distribution and utilization is expected. This entails that hydrogen, which is traditionally an industrial gas, will come into proximity of populated urban areas and in some situations handled by the untrained public. To realize all their benefits, hydrogen and its technologies must be safely developed and deployed. The specific properties of hydrogen involving wide flammability range, low ignition energy and fast flame speed implies that any accidental release of hydrogen can be easily ignited. Comparing with conventional fuels, combustion systems fueled by hydrogen are also more prone to flame instability and abnormal combustion. This paper aims to provide a comprehensive review about combustion research related to hydrogen safety. It starts with a brief introduction which includes some overview about risk analysis, codes and standards. The core content covers ignition, fire, explosions and deflagration to detonation transition (DDT). Considering that DDT leads to detonation, and that detonation may also be induced directly under special circumstances, the subject of detonation is also included for completeness. The review covers laboratory, medium and large-scale experiments, as well as theoretical analysis and numerical simulation results. While highlights are provided at the end of each section, the paper closes with some concluding remarks highlighting the achievements and key knowledge gaps.

08 HYDROGEN↗
DOE OSTI2011

Dark Forces At The Tevatron

A simple explanation of the W + dijet excess recently reported by the CDF collaboration involves the introduction of a new gauge boson with sizable couplings to quarks, but with no or highly suppressed couplings to leptons. Anomaly-free theories which include such a leptophobic gauge boson must also include additional particle content, which may include a stable and otherwise viable candidate for dark matter. Based on the couplings and mass of the Z` required to generate the CDF excess, we predict such a dark matter candidate to possess an elastic scattering cross section with nucleons on the order of σ ~ 10 -40 cm 2 , providing a natural explanation for the signals reported by the CoGeNT and DAMA/LIBRA collaborations. In this light, CDF may be observing the gauge boson responsible for the force which mediates the interactions between the dark and visible matter of our universe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Review of neutral naturalness

The hierarchy between the mass parameter of the Higgs boson and larger mass scales becomes ever more puzzling as experiments explore higher energies. Neutral naturalness is the umbrella term for symmetry-based explanations for these hierarchies whose quark symmetry partners are not charged under the SU(3) c color gauge group of the Standard Model. Though the first manifestations of this idea predate the physics runs of the Large Hadron Collider, since the Higgs discovery this paradigm has grown and developed to include a wide variety of concrete realizations with connections to intriguing collider signals. Determining the phenomenology of such models often requires the characterization—typically relying on lattice calculations—of a new confining gauge symmetry. This presents additional motivation to further develop our understanding of nonperturbative field theory as well as to pursue specific lattice studies. The wide range of suggested hidden sectors also produces a variety of dark matter candidates, intersections with astrophysics and cosmology, and ties to neutrinos and flavor. In this review, we orient the reader within both this growing collection of specific models and the physical phenomena they produce. We also survey the often less familiar dynamics of hidden-sector glueballs and quirks. In addition to providing a guide to past efforts, we reveal interesting directions for further study.

Batell, Brian [Univ. of Pittsburgh, PA (United Sta↗
DOE OSTI2023

Direct measurement and calculation of rubber bulk modulus by piston-cylinder method using conventional mechanical testing equipment

This article describes a method to directly measure the bulk modulus of rubber using a piston-cylinder type apparatus. The function of the testing apparatus is to reliably transfer load to the water inside the vessel and allow for the accurate and continuous measurement of volumetric displacement as the contents are compressed. During the test, load is applied to a piston-cylinder containing the rubber test sample and water using a conventional mechanical testing load frame. Load and the travel of the piston are recorded by a load cell and extensometer, respectfully. A brass or stainless steel plug of the same dimensions as the test sample is tested as a control sample to isolate the compliance of the system, including the compressibility of water and compliance of the piston-cylinder. The results from this control test are used to disincorporate the compliance of the system from the sample test results. Load-linear displacement data are mathematically converted to pressure-volumetric displacement data, from which bulk modulus is calculated. The test apparatus and method are validated using the known bulk modulus of water. Finally, the bulk modulus for two similar rubbers is evaluated. The validity of the results and limitations of the device are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Functional group activation and coupling agent migration induced by plasma treatment in adhesive for enhanced toughness of metal-composite joints

Commercial adhesive paste was additionally activated using low-power oxygen plasma with different plasma exposure durations to investigate its interfacial bonding contribution in adhesively-bonded Aural-5/CFRP-PA6 double cantilever beam (DCB) joints with plasma-treated adherends. The plasma-treated adhesive showed enhanced functional peak intensities in Fourier transfer infrared spectroscopy (FTIR) as plasma exposure time was increased, and some degree of oxidation was also detected via X-ray photoelectron spectroscopy (XPS). A small molecule, dicyandiamde (coupling agent) in adhesive was migrated to adhesive layer, where double concentration of coupling agent was detected after 10 minutes of plasma treatment. As a result, characterization of the adhesive/CFRP-PA6 interface after DCB fracture showed additional chemical bonds formed through amine-initiated epoxy ring opening polymerization, as well as amide bonds and ester bonds. In conclusion, these additional bonds at the adhesive/CFRP-PA6 interfaces led to significantly increased failure extensions and fracture energies of the joints as the plasma exposure time on the adhesive increased, compared to the joints with plasma-treated adherends but non-plasma-treated adhesive as commonly seen in the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of dilution and pressure on combustion characteristics within externally heated micro-tubes

Here this study investigates the impact of pressure and dilution on combustion behavior of of C 2H6/air/N2 mixtures within an externally heated micro-tube using both experimental and analytical techniques. Experiments are conducted for pressures up to 10 bar at multiple dilution levels and document three flame regimes, i.e. weak flames, FREI and normal flames. Characteristic temperatures for flame stabilization, as well as and ignition and extinction are obtained by applying a novel thin filament pyrometry method (TFP), which uses a thin silicon carbide (SiC) filament that enables temperature measurements for both reacting and non-reacting cases. Results show a decrease of characteristic temperatures with increasing pressure, which can be which can be partially compensated by a decrease of O2 content. Further, regime transitions occur at lower velocity as the pressure increases, whereas weak flame positions are insensitive to dilution at a given pressure. Predictions from the analytical model compare favorably with experimental results. The most prominent finding is that as dilution increases, the transition from weak flame to FREI becomes less abrupt and is completely lost for high dilution levels (i.e. low O2 content). Both experimental and analytical results indicate that the unstable FREI combustion regime does not exist at high dilution levels, i.e. weak flame and normal flame regimes are no longer clearly separated. As FREI are interpreted as a cyclic transition from an ignition zone to a propagating flame, results for highly diluted conditions are interpreted as a combustion regime where classical flame propagation ceases to exist.

42 ENGINEERING↗
DOE OSTI2014

Mesh infrastructure for coupled multiprocess geophysical simulations

We have developed a sophisticated mesh infrastructure capability to support large scale multiphysics simulations such as subsurface flow and reactive contaminant transport at storage sites as well as the analysis of the effects of a warming climate on the terrestrial arctic. These simulations involve a wide range of coupled processes including overland flow, subsurface flow, freezing and thawing of ice rich soil, accumulation, redistribution and melting of snow, biogeochemical processes involving plant matter and finally, microtopography evolution due to melting and degradation of ice wedges below the surface. In addition to supporting the usual topological and geometric queries about the mesh, the mesh infrastructure adds capabilities such as identifying columnar structures in the mesh, enabling deforming of the mesh subject to constraints and enabling the simultaneous use of meshes of different dimensionality for subsurface and surface processes. The generic mesh interface is capable of using three different open source mesh frameworks (MSTK, MOAB and STKmesh) under the hood allowing the developers to directly compare them and choose one that is best suited for the application's needs. We demonstrate the results of some simulations using these capabilities as well as present a comparison of the performance of the different mesh frameworks.

58 GEOSCIENCES↗
DOE OSTI2022

Synthetic biodegradable polyhydroxyalkanoates (PHAs): Recent advances and future challenges

This article reviews the advances made over the past five decades of research in developing effective chemocatalytic pathways to synthesize polyhydroxyalkanoates (PHAs), a prominent class of biodegradable polyesters found in nature and considered as sustainable alternatives to petroleum-based non-degradable plastics. Focused in this review are recent efforts that seek to address the key challenges facing the biosynthetic routes by taking advantage of precision in synthesis, expedient tunability in polymer stereomicrostructures and structures of monomers and molecular catalysts, as well as scalability and speed in polymer production that chemical catalysis can offer. This article is organized by poly(3-hydroxybutyrate) (P3HB) stereomicrostructures (tacticities), from isotactic to syndiotactic to atactic P3HB materials, followed by other PHA homopolymers and copolymers. Under each type of stereochemically defined PHAs, monomers, catalysts, and polymerizations employed for the synthesis, as well as mechanistic aspects when possible, are described. Next, recent advances in expanding the PHA scope and developing functionalized, uncommon or unnatural PHAs, inaccessible by biological methods, especially block and stereoblock or stereosequenced PHAs, are highlighted in their synthetic methods and advanced materials properties. As a result, four key remaining challenges, and thus corresponding future directions directed at addressing those challenges, are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Physics model validation of propane and methane for Hydrogen Plus Other Alternative Fuels Risk Assessment Models (HyRAM+)

HyRAM+ is a toolkit that includes fast-running models for the unconstrained (i.e., no wall interactions) dispersion and flames for non-premixed fuels. The models were developed for use with hydrogen, but the toolkit was expanded to include propane and methane in a recent release. Here, in this work we validate the dispersion and flame models for these additional fuels, based on reported literature data. The validation efforts spanned a range of release conditions, from subsonic to underexpanded jets and flames for a range of mass flow rates. In general, the dispersion model works well for both propane and methane although the width of the jet/plume is predicted to be wider than observed in some cases. The flame model tends to over-predict the induced buoyancy for low-momentum flames, while the radiative heat flux agrees with the experimental data reasonably well, for both fuels. The models could be improved but give acceptable predictions for propane and methane behavior for the purposes of risk assessment.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Multi-level optimization with the koopman operator for data-driven, domain-aware, and dynamic system security

Cyber-Physical Systems (CPSs) like the power grid are critically important but also increasingly vulnerable; ensuring reliable system operation in the face of disruptions is becoming more and more challenging. Multi-Level Optimization (MLO) is a powerful way to model adversarial interactions, which naturally makes it applicable to studying CPS security. However, MLO typically does not address underlying system dynamics, and incorporating nonlinear dynamics is generally infeasible. In this paper, we show how to combine MLO with the Koopman Operator (KO) to remedy this. The KO maps nonlinear dynamics to a lifted space in which those dynamics are linear, thus making it ideal for use with MLO. Moreover, the structure of the KO also provides convenient ways to incorporate domain knowledge into the data-driven process of learning the KO representation of a given system. Here we then demonstrate the use of MLO-KO on a small example problem taken from the power grid domain, discuss the scalability and computational cost of MLO-KO, and identify future research directions for this work.

42 ENGINEERING↗
DOE OSTI2019

Comparison of biofuel life-cycle GHG emissions assessment tools: The case studies of ethanol produced from sugarcane, corn, and wheat

The use of alternative fuels, particularly bio-based fuels, has been an important strategy to achieve greenhouse gas (GHG) emission reductions compared to petroleum-based fuels. However, discrepancies between results obtained by using different attributional life-cycle assessment (LCA) tools have challenged the credibility of the individual assessments, and as result, the progress towards or compliance with GHG mitigation targets. The objective of this study was to identify the main differences and commonalities in methodological structures, calculation procedures, and assumptions for the major commercial biofuel, ethanol, across three public LCA tools, BioGrace (EU), GHGenius (Canada), and GREET (U.S.), and a research-oriented fourth, the Virtual Sugarcane Biorefinery (VSB), a Brazilian platform for sugarcane ethanol assessments. The calculated emissions across models ranged from 16 to 45 for sugarcane, 43-62 for corn, and 45-68 g CO 2 eq MJ -1 for wheat ethanol. Harmonizing the three public models with VSB assumptions for sugarcane ethanol produced in Brazil, the range was reduced to 16-17 g CO 2 eq MJ -1 for sugarcane ethanol. Agricultural production (e.g., N 2 O emissions from fertilizers; energy and fuel use; straw field-burning; and limestone application) and ethanol shipping were found to be the major causes for variations for differences calculated for sugarcane ethanol. Similarly, harmonizing BioGrace and GHGenius calculations using GREET assumptions for U.S. corn ethanol generated nearly identical results (models varied within a 3% range). The coproduct treatment method was found to be the most influential parameter in the variations calculated for both corn and wheat ethanol. The application of the tools as part of GHG emissions accounting requirements is often defined via regulations and differences and/or conflicting assumptions set-forth in these models lead to most differences observed. Our study provides recommendations for promoting transparency in LCA calculations and assumptions across the tools used in research and development or for regulatory tools regarding biofuels.

09 BIOMASS FUELS↗
DOE OSTI2025

Low embodied energy and carbon, high lifetime silicon boules via a combined chemical vapor deposition/float zone process

This work evaluates a new process route to making float zone (Fz)-quality silicon wafers using a combination of computational fluid dynamics (CFD) modeling and technoeconomic analysis. Our analysis finds that the new process competes with Czochralski (Cz)-grown wafers on a levelized cost of energy system level. The new process also decreases embodied energy and carbon of silicon photovoltaics (PV) by ~6x circumventing the energy-costly Siemens process used in polycrystalline silicon (poly-Si) production plants to generate feedstock for Fz and Cz boules. Instead of using poly-Si from the Siemens process to feed crystallization, the new process uses the high-purity, trichlorosilane (TCS) precursor gas to grow a poly-Si feed rod in-situ during a modified Fz1,2 boule growth process. The gas-to-boule float zone process enables opportunity to produce high-purity (low metals and oxygen content), uniformly doped single crystal silicon boules and wafers with high bulk lifetimes (τ bulk > 15 ms) to enable higher efficiency cells (>27 %) with fewer known degradation mechanisms than Czochralski (Cz)-grown wafers. These benefits reduce the levelized cost of electricity (LCOE) of PV-produced electricity. Here we show the results of our CFD and chemical modeling of the process to prove feasibility and economic viability.

14 SOLAR ENERGY↗