Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “equilibrium modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

EUVE spectroscopy of epsilon Canis Majoris (B2 II) from 70 to 730 A

We present spectra of the brightest stellar source of extreme ultraviolet (EUV) radiation longward of 400 A, the B2 II star, epsilon CMa. These data were taken with the three spectrometers aboard the NASA Extreme Ultraviolet Explorer satellite (EUVE) during the first cycle of pointed observations. We report on our initial studies of the continuum and line spectrum of the stellar photosphere in the 320 to 730 A region, and on the wind emission lines observed in the 170-375 A region. This is the first EUV spectrum of an early-type star, and thus makes epsilon CMa the most comprehensively observed B star from the X-ray to infrared regimes. The radiation in both the H Lyman continuum and He I continuum (shortward of 504 A) are found to be significantly greater than predicted by both Local Thermodynamic Equilibrium (LTE) and non-LTE model atmospheres. Since epsilon CMa also exhibits a mid-infrared excess, this points to the outer layers being warmer than the models indicate. The anomalously large Lyman continuum flux, combined with the very low column density measured in the direction toward this star implies that it is the dominant source of hydrogen ionization of the local interstellar medium in the immediate vicinity of the sun. All of the lines predicted to be strong from model atmospheres are present and several wind absorption features are also identified. We have detected emission lines from highly ionized iron that are consistent with the ROSAT Position Sensitive Proportional Counter (PSPC) observations if a multi-temperature emission model is used, and the assumption is made that there is significant absorption beyond that of the neutral phase of the ISM. The spectrum shows strong O III 374 A line emission produced by the Bowen flourescence mechanism, which has not previously been observed in the spectra of hot stars.

Cassinelli, J. P.↗
NASA NTRS1994

X-ray induced ionization in the winds of near-main-sequence O and B stars

We investigate the effects of X-rays on the ionization state of stellar winds for O and early-B stars along the main sequence. In our investigation, detailed statistical equilibrium, radiative transfer, and atomic physics models are used to compute ionization distributions for H, He, C, N, O, and Si. X-rays are modeled as a spatially distributed source within the wind, with parameters constrained by ROSAT and Einstein observations. Our results indicate that the ionization balance in the winds of stars with spectral type B0 V and later is significantly altered by the X-ray radiation field. Unlike the case of denser O star winds, where the X-rays tend to perturb the level of ionization, the ionization state of the bulk wind of early-B stars can be significantly increased by soft X-rays. We examine in detail the case of tau Sco (B0 V), which has been well-studied at UV and X-ray wavelengths. Comparisons are made between calculated ionization fractions and those deduced from UV observations. In addition, we address the sensitivity of our results to the X-ray source characteristics, the wind temperature, and the photospheric extreme ultraviolet (EUV) flux. Our results suggest the possibility that for early-B stars X-rays play a critical role in both influencing the radiation line driving force, as well as ionizing and heating the wind all the way down to the top of the photosphere.

Macfarlane, J. J.↗
NASA NTRS1999

AKN 564: An Unusual Component in the X-ray Spectra of NLSy1 Galaxies

We present an ASCA observation of the narrow-line Seyfert l (NLSyl) Arakelian 564. The X-ray light curve shows rapid variability, but no evidence for energy-dependence to these variations, within the 0.6 - 10 keV bandpass. A strong (EW approximately 70 eV) spectral feature is observed close to 1 keV. A similar feature has been observed in TON S180, another member of the NLSyl class of objects, but has not been observed in broad-line Seyfert galaxies. The feature energy suggests a large contribution from Fe L-shell lines but its intensity is difficult to explain in terms of emission and/or absorption from photoionized gas. The models which predict most emission at 1 keV are characterized by extreme values of column density, Fe abundance and ionization parameter. Models based on gas in thermal equilibrium with kT approximately l keV provide an alternative parameterization of the soft spectrum. The latter may be interpreted as the hot intercloud medium, undergoing rapid cooling and producing strong Fe L-shell recombination lines. In all cases the physical conditions are rather different from those observed in broad-line Seyferts. The hard X-ray spectrum shows a broad and asymmetric Fe K(alpha) line of large equivalent width (approximately 550 eV) suggestive of significant emission from the inner accretion disk. The profile can be explained by a neutral disk viewed at approximately 60 deg to the line-of-sight, contrary to the hypothesis that NLSyls are viewed pole-on. The large EW of this line, the strong 1 keV emission and the strong optical Fe emission lines all suggest an extreme Fe abundance in this and perhaps other NLSyls.

Turner, T. J.↗
NASA NTRS1998

Development of Numerical Extended Hydrodynamics for Transition-Regime Non-Equilibrium Flows Encountered in Semiconductor Manufacturing Processes

Six months of funding was received for the proposed three year research program (funding for the period from March 1, 1997 to August 31, 1997). Although the official starting date for the project was March 1, 1997, no funding for the project was received until July 1997. In the funded research period, considerable progress was made on Phase I of the proposed research program. The initial research efforts concentrated on applying the 10-, 20-, and 35-moment Gaussian-based closures to a series of standard two-dimensional non-reacting single species test flow problems, such as the flat plate, couette, channel, and rearward facing step flows, and to some other two-dimensional flows having geometries similar to those encountered in chemical-vapor deposition (CVD) reactors. Eigensystem analyses for these systems for the case of two spatial dimensions was carried out and efficient formulations of approximate Riemann solvers have been formulated using these eigenstructures. Formulations to include rotational non-equilibrium effects into the moment closure models for the treatment of polyatomic gases were explored, as the original formulations of the closure models were developed strictly for gases composed of monatomic molecules. The development of a software library and computer code for solving relaxing hyperbolic systems in two spatial dimensions of the type arising from the closure models was also initiated. The software makes use of high-resolution upwind finite-volumes schemes, multi-stage point implicit time stepping, and automatic adaptive mesh refinement (AMR) to solve the governing conservation equations for the moment closures. The initial phase of the code development was completed and a numerical investigation of the solutions of the 10-moment closure model for the simple two-dimensional test cases mentioned above was initiated. Predictions of the 10-moment model were compared to available theoretical solutions and the results of direct-simulation Monte Carlo (DSMC) calculations. The first results of this study were presented at a meeting last year.

Groth, Clinton P. T.↗
NASA NTRS2001

The Isothermal Dendritic Growth Experiment (IDGE)

Dendritic solidification is one of the simplest examples of pattern formation where a structureless melt evolves into a ramified crystalline microstructure; it is a common mode of solidification in many materials, but especially so in metals and alloys. There is considerable engineering interest in dendrites because of the role dendrites play in the determination of microstructure, and thereby in influencing the physical properties of cast metals and alloys. Dendritic solidification provides important examples of non-equilibrium physics, pattern formation dynamics, and models for computational condensed matter and material physics. Current theories of dendritic growth generally couple diffusion effects in the melt with the physics introduced by the interface. Unfortunately, in terrestrial based experiments, convective effects in the melt alter the growth process in such a manner as to prevent definitive analysis of convective, diffusive or interfacial effects. Thus, the effective elimination of convection in the melt by operating experiments on orbit were required to produce high-fidelity data needed for achieving further progress. This simple fact comprised the scientific justification for the IDGE.

Glicksman, M. E.↗
NASA NTRS2001

The Diffuse EUV and X-Ray Background as a Probe of the Interstellar Medium

We have used the Deep Survey telescope of the Extreme Ultraviolet Explorer to investigate shadows in the diffuse EUV/soft X-ray background that are cast by clouds in the interstellar medium. We confirm the existence of a shadow previously reported and provide evidence for two new shadows. We used IRAS data to identify the clouds producing these shadows and to determine their optical depth to EUV radiation. The EUV-absorbing clouds are optically thick in the EUV, and all EUV emission detected in the direction of these shadows must be produced from material in front of the clouds. We obtained new optical data to determine the distance to these clouds. We use a new differential cloud technique to obtain the pressure of the interstellar medium. These results do not depend on any zero-level calibration of the data. Our results provide evidence that the pressure of the hot interstellar gas is the same in three different directions in the local interstellar medium and is at least 8 times higher than that derived for the Local Cloud surrounding our Sun. This provides new evidence for large thermal pressure imbalances in the local ISM and directly contradicts the basic assumption of thermal pressure equilibrium used in almost all present models of the interstellar medium.

Lieu, Richard↗
NASA NTRS2004

Mass Anomalies on Ganymede

Radio Doppler data from two Ganymede encounters (G1 and G2) on the first two orbits in the Galileo mission have been analyzed previously for gravity information . For a satellite in hydrostatic equilibrium, its gravitational field can be modeled adequately by a truncated spherical harmonic series of degree two. However, a fourth degree field is required in order to fit the second Galileo flyby (G2). This need for a higher degree field strongly suggests that Ganymede s gravitational field is perturbed by a gravity anomaly near the G2 closest approach point (79.29 latitude, 123.68 west longitude). In fact, a plot of the Doppler residuals , after removal of the best-fit model for the zero degree term (GM) and the second degree moments (J2 and C22), suggests that if an anomaly exists, it is located downtrack of the closest approach point, closer to the equator.

Schubert, G.↗
NASA NTRS2009

Boundary Layer Protuberance Simulations in Channel Nozzle Arc Jet

Various protuberance heights and shapes were modeled in the channel nozzle of the NASA Johnson Space Center Atmospheric Reentry Materials and Strictures Facility with the Data- Parallel Line Relaxation computational fluid dynamics code. The heating on the protuberance was compared to baseline (no protuberance) heating at a single fixed arc jet condition in order to obtain heating augmentation factors that will be used for flight traceability in the Boundary Layer Transition Flight Experiment on Space Shuttle Orbiter flights STS-119 (completed) and STS-128 (future flight). The arc jet simulations were performed in conjunction with the actual ground tests performed on the flight version (selected height and shape) of the protuberance. Thearc jet simulations for the final (flight version) protuberance included non-uniform inflow conditions beginning at the channel nozzle throat. The 2D inflow condition was modeled based on the current best practices methodology and used variable enthalpy and mass flow rate across the throat. Channel walls were modeled as fully catalytic isothermal surfaces, while the test section (consisting of Reaction Cured Glass tiles) was modeled as a partially catalytic radiative equilibrium wall. The results of the protuberance and baseline simulations were compared to the applicable ground test results. In addition, the obtained heating augmentation factors were compared to the factors derived from the STS-119 flight data. The effects of the protuberance shock on the opposite channel wall were also investigated.

Larin, M. E.↗
NASA NTRS2010

Boundary Layer Protuberance Simulations in Channel Nozzle Arc-Jet

Two protuberance designs were modeled in the channel nozzle of the NASA Johnson Space Center Atmospheric Reentry Materials and Structures Facility with the Data-Parallel Line Relaxation computational fluid dynamics code. The heating on the protuberance was compared to nominal baseline heating at a single fixed arc-jet condition in order to obtain heating augmentation factors for flight traceability in the Boundary Layer Transition Flight Experiment on Space Shuttle Orbiter flights STS-119 and STS-128. The arc-jet simulations were performed in conjunction with the actual ground tests performed on the protuberances. The arc-jet simulations included non-uniform inflow conditions based on the current best practices methodology and used variable enthalpy and constant mass flow rate across the throat. Channel walls were modeled as fully catalytic isothermal surfaces, while the test section (consisting of Reaction Cured Glass tiles) was modeled as a partially catalytic radiative equilibrium wall. The results of the protuberance and baseline simulations were compared to the applicable ground test results, and the effects of the protuberance shock on the opposite channel wall were investigated.

Marichalar, J. J.↗
NASA NTRS2010

Nonlinear Dynamics of Cantilever-Sample Interactions in Atomic Force Microscopy

The interaction of the cantilever tip of an atomic force microscope (AFM) with the sample surface is obtained by treating the cantilever and sample as independent systems coupled by a nonlinear force acting between the cantilever tip and a volume element of the sample surface. The volume element is subjected to a restoring force from the remainder of the sample that provides dynamical equilibrium for the combined systems. The model accounts for the positions on the cantilever of the cantilever tip, laser probe, and excitation force (if any) via a basis set of set of orthogonal functions that may be generalized to account for arbitrary cantilever shapes. The basis set is extended to include nonlinear cantilever modes. The model leads to a pair of coupled nonlinear differential equations that are solved analytically using a matrix iteration procedure. The effects of oscillatory excitation forces applied either to the cantilever or to the sample surface (or to both) are obtained from the solution set and applied to the to the assessment of phase and amplitude signals generated by various acoustic-atomic force microscope (A-AFM) modalities. The influence of bistable cantilever modes of on AFM signal generation is discussed. The effects on the cantilever-sample surface dynamics of subsurface features embedded in the sample that are perturbed by surface-generated oscillatory excitation forces and carried to the cantilever via wave propagation are accounted by the Bolef-Miller propagating wave model. Expressions pertaining to signal generation and image contrast in A-AFM are obtained and applied to amplitude modulation (intermittent contact) atomic force microscopy and resonant difference-frequency atomic force ultrasonic microscopy (RDF-AFUM). The influence of phase accumulation in A-AFM on image contrast is discussed, as is the effect of hard contact and maximum nonlinearity regimes of A-AFM operation.

Cantrell, John H.↗
NASA NTRS2011

A Nonlinear Dynamic Model and Free Vibration Analysis of Deployable Mesh Reflectors

This paper presents a dynamic model of deployable mesh reflectors, in which geometric and material nonlinearities of such a space structure are fully described. Then, by linearization around an equilibrium configuration of the reflector structure, a linearized model is obtained. With this linearized model, the natural frequencies and mode shapes of a reflector can be computed. The nonlinear dynamic model of deployable mesh reflectors is verified by using commercial finite element software in numerical simulation. As shall be seen, the proposed nonlinear model is useful for shape (surface) control of deployable mesh reflectors under thermal loads.

mesh reflectors↗
NASA NTRS2012

Multiscale Modeling of Grain Boundaries in ZrB2: Structure, Energetics, and Thermal Resistance

A combination of ab initio, atomistic and finite element methods (FEM) were used to investigate the structures, energetics and lattice thermal conductance of grain boundaries for the ultra high temperature ceramic ZrB2. Atomic models of idealized boundaries were relaxed using density functional theory. Information about bonding across the interfaces was determined from the electron localization function. The Kapitza conductance of larger scale versions of the boundary models were computed using non-equilibrium molecular dynamics. The interfacial thermal parameters together with single crystal thermal conductivities were used as parameters in microstructural computations. FEM meshes were constructed on top of microstructural images. From these computations, the effective thermal conductivity of the polycrystalline structure was determined.

Lawson, John W.↗
NASA NTRS2014

X-Ray Observations of VY Scl-Type Nova-Like Binaries in the High and Low State

Four VY Scl-type nova-like systems were observed in X-rays during both the low- and the high-optical states. We examined Chandra, ROSAT, Swift and Suzaku archival observations of BZ Cam, MV Lyr, TT Ari and V794 Aql. The X-ray flux of BZ Cam is higher during the low state, but there is no supersoft X-ray source (SSS) as hypothesized in previous articles. No SSS was detected in the low state of the any of the other systems, with the X-ray flux decreasing by a factor between 2 and 50. The best fit to the Swift X-ray spectra is obtained with a multicomponent model of plasma in collisional ionization equilibrium. The high-state high-resolution spectra of TT Ari taken with Chandra Advanced CCD Imaging Spectrometer (ACIS-S) and the Chandra High Energy Transmission Grating (HETG) shows a rich emission line spectrum, with prominent lines of Mg, Si, Ne and S. The complexity of this spectrum seems to have origin in more than one region, or more than one single physical mechanism. While several emission lines are consistent with a cooling flow in an accretion stream, there is at least an additional component. We discuss the origin of this component, which is probably arising in a wind from the system. We also examine the possibility that the VY Scl systems may be intermediate polars, and that while the boundary layer of the accretion disc emits only in the extreme ultraviolet, part of the X-ray flux may be due to magnetically driven accretion.

accretion↗
NASA NTRS2019

An Analytic Model for Estimating the First Contact Resistance Needed to Avoid Damaging ESD During Spacecraft Docking in GEO

NASA’s Gateway program will involve spacecraft (s/c) docking in the outer radiation belt in order to transfer Gateway elements between s/c for transport to lunar orbit. The charging of these s/c to different potentials prior to docking raises the possibility of a damaging electrostatic discharge (ESD) at the time of first contact between the s/c. A proposed mitigation strategy is for first contact to occur prior to docking through a resistor with resistance R that would lower the potential difference at an optimal rate to a sufficiently low value to prevent ESD damage. The coupling of s/c by a resistor can be modeled by SPIS, but for realistic two s/c models SPIS can take hours to simulate the evolution of the s/c surface charges and potentials to an equilibrium state. Our objective is to develop a simpler model of s/c resistive coupling that runs orders of magnitude faster while providing useful first design estimates of the time variation of the s/c potentials, current through the resistor, and how these vary with R and s/c configuration This configuration is defined by the relative separation and orientation of the s/c, and their solar illumination. The configuration and geometry of the s/c determine their capacitive coupling. The s/c capacitances are computed using Nascap-2K. This poster presents the first version of such a model, and initial tests.

Goodman, Michael L.↗
NASA NTRS2019

An Analytic Model for Estimating the First Contact Resistance Needed to Avoid Damaging ESD During Spacecraft Docking in GEO

NASA’s Gateway program is to involve spacecraft (s/c) docking in the outer radiation belt in order to transfer Gateway elements between s/c for transport to lunar orbit. The charging of these s/c to different potentials prior to docking raises the possibility of a damaging electrostatic discharge (ESD) at the time of first contact between the s/c. A proposed mitigation strategy is for first contact to occur prior to docking through a resistor with resistance R that would lower the potential difference at an optimal rate to a sufficiently low value to prevent a damaging ESD. The coupling of s/c by a resistor can be modeled by SPIS (Spacecraft Plasma Interaction System), but for realistic two s/c models SPIS can take hours to simulate the evolution of the s/c surface charges and potentials to an equilibrium state. Our objective is to develop a simpler model of s/c resistive coupling that runs orders of magnitude faster while providing useful first design estimates of the time variation of the s/c potentials, current through the resistor, and how these vary with R and s/c configuration. This configuration is defined by the relative separation and orientation of the s/c, and their solar illumination. The configuration and geometry of the s/c determine their capacitive coupling. The s/c capacitances are computed using Nascap-2K. This abstract and the associated poster describe the first version of such a model, and initial tests.

Goodman, Michael L.↗
NASA NTRS2023

Coupled Fluid Dynamics and Material Response Simulations for Nitrogen High Enthalpy Flows

The study focuses on the interaction of nitrogen flows with thermal protection systems during atmospheric re-entry for NASA flight missions. The Ares multiphysics coupling tool is employed to investigate the coupling between the fluid (US3D) and material response (Icarus) solvers using various modeling approaches. These approaches include the equilibrium thin-film coefficients approach, a weakly coupled approach with temperature coupling, and an approach considering the full chemical composition of the surface and the transfer of pyrolysis gases. The objective is to understand and accurately represent the mechanisms of nitrogen interaction with the surface, such as nitridation and catalytic recombination. The study aims to assess the accuracy of the different approaches by comparing them to experimental results obtained from NASA arc-jet facilities. By addressing these challenges and improving the understanding of nitrogen-surface interactions, it is expected to enhance the design and performance analysis of thermal protection systems for future missions.

Ablation↗
NASA NTRS2023

Universal Two-Phase Convection Heat Transfer Correlations for Cryogenic Pipe Chilldown

This paper presents a set of universal two-phase convection heat transfer correlations for modeling boiling heat transfer during pipe chilldown fit over the widest available range of cryogenic fluids and thermodynamic conditions. The correlations improve upon prior correlations that were developed separately for liquid nitrogen (LN2) and liquid hydrogen (LH2) pipe quenching datasets. The new correlations include equations to calculate the single-phase vapor heat transfer, film boiling heat transfer, transition boiling heat transfer, nucleate boiling heat transfer, single-phase liquid heat transfer, bulk vapor temperature during high quality film boiling, Leidenfrost temperature, critical heat flux, critical heat flux temperature, and the onset of nucleate boiling temperature. The correlations were validated against LH2, LN2, liquid methane, liquid oxygen, and liquid argon pipe quenching datasets. The eight datasets cover the following parameter ranges: pipe lengths of 0.1 to 6.5m; outer pipe diameters of 12.7 to 25.4 mm; pipe wall thicknesses from 0.51 to 1.64 mm; flow directions of upward, downward, and horizontal; gravity levels of 1g and 0g±0.01g. A numerical model assumes homogeneous mixing between the vapor and liquid and implicitly integrates the coupled energy equations for the pipe and fluid, as well as continuity for the fluid. The model was used to estimate the equilibrium quality and fluid mass accumulation along the pipes during chilldown from estimates of the fluid-pipe heat transfer extracted from temperature measurements. The correlations can be implemented in lumped parameter codes such as SINDA/FLUINT and the Generalized Fluid System Simulation Program (GFSSP) to improve the accuracy of chilldown time and chilldown boiloff mass predictions. Such predictions are useful for designing ground or in-space cryogenic liquid transfer systems.

Universal Correlations↗
NASA NTRS1982

Model atmospheres, predicted spectra, and colors

Theoretical models of stellar atmospheres and the process of forming a spectrum are reviewed with particular reference to the spectra of B stars. In the case of classical models the stellar atmosphere is though to consist of plane parallel layers of gas in which radiative and hydrostatic equilibrium exists. No radiative energy is lost or gained in the model atmosphere, but the detailed shape of the spectrum is changed as a result of the interactions with the ionized gas. Predicted line spectra using statistical equilibrium local thermodynamic equilibrium (LTE), and non-LTE physics are compared and the determination of abundances is discussed. The limitations of classical modeling are examined. Models developed to demonstrate what motions in the upper atmosphere will do to the spectrum and to explore the effects of using geometries different from plane parallel layer are reviewed. In particular the problem of radiative transfer is addressed.

Source record↗