Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “equation of fluid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Navier-Stokes flowfield computation of wing/rotor interaction for a tilt rotor aircraft in hover

The download on the wing produced by the rotor-induced downwash of a tilt rotor aircraft in hover is of major concern because of its severe impact on payload-carrying capability. A method has been developed to help gain a better understanding of the fundamental fluid dynamics that causes this download, and to help find ways to reduce it. In particular, the method is employed in this work to analyze the effect of a tangential leading edge circulation-control jet on download reduction. Because of the complexities associated with modeling the complete configuration, this work focuses specifically on the wing/rotor interaction of a tilt rotor aircraft in hover. The three-dimensional, unsteady, thin-layer compressible Navier-Stokes equations are solved using a time-accurate, implicit, finite difference scheme that employs LU-ADI factorization. The rotor is modeled as an actuator disk which imparts both a radical and an azimuthal distribution of pressure rise and swirl to the flowfield. A momentum theory blade element analysis of the rotor is incorporated into the Navier-Stokes solution method. Solution blanking at interior points of the mesh has been shown here to be an effective technique in introducing the effects of the rotor and tangential leading edge jet. Results are presented both for a rotor alone and for wing/rotor interaction. The overall mean characteristics of the rotor flowfield are computed including the flow acceleration through the rotor disk, the axial and swirl velocities in the rotor downwash, and the slipstream contraction. Many of the complex tilt rotor flow features are captured including the highly three-dimensional flow over the wing, the recirculation fountain at the plane of symmetry, wing leading and trailing edge separation, and the large region of separated flow beneath the wing. Mean wing surface pressures compare fairly well with available experimental data, but the time-averaged download/thrust ratio is 20-30 percent higher than the measured value. The discrepancy is due to a combination of factors that are discussed. Leading edge tangential blowing, of constant strength along the wing span, is shown to be effective in reducing download. The jet serves primarily to reduce the pressure on the wing upper surface. The computation clearly shows that, because of the three-dimensionality of the flowfield, optimum blowing would involve a spanwise variation in blowing strength.

Fejtek, Ian G.↗
NASA NTRS2003

Experimental Study of Supercooled Large Droplet Impingement Effects

Typically, ice accretion results from small supercooled droplets (droplets cooled below freezing), usually 5 to 50 microns in diameter, which can freeze upon impact with an aircraft surface. Recently, ice accretions resulting from supercooled large droplet (SLD) conditions have become a safety concern. Current ice accretion codes have been extensively tested for Title 14 Code of Federal Regulations Part 25, Appendix C icing conditions but have not been validated for SLD icing conditions. This report presents experimental methods for investigating large droplet impingement dynamics and for obtaining small and large water droplet impingement data.

ICE ACCRETION CODE↗
NASA NTRS2015

A Summary of the Space-Time Conservation Element and Solution Element (CESE) Method

The space-time Conservation Element and Solution Element (CESE) method for solving conservation laws is examined for its development motivation and design requirements. The characteristics of the resulting scheme are discussed. The discretization of the Euler equations is presented to show readers how to construct a scheme based on the CESE method. The differences and similarities between the CESE method and other traditional methods are discussed. The strengths and weaknesses of the method are also addressed.

Fluid Dynamics↗
DOE OSTI2021

Embedding condition describing shearing, dissipative collapse

Highlights: • Perturbative approach to the time-dependent Karmarkar condition in shearing collapse. • Analysis of the (in)stability of the collapsing fluid using the TOV equation. • Study of the temperature profiles using a causal heat transport equation. In this work we employ the time-dependent Karmarkar condition to model dissipative gravitational collapse in the presence of shear which leads to a final static configuration. We believe that this is a first attempt at using the time-dependent Karmarkar condition describing a radiating star with shear in which the collapsing core dissipates energy in the form of a radial heat flux. The final static configuration which is described by an embedding class I spacetime was obtained by Hansraj and Moodly who showed that this solution satisfies all the physical requirements for a static compact object. As the collapse proceeds and the heat flux tends to zero the dynamical core evolves into a static compact core with the exterior spacetime being described by the vacuum Schwarzschild solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1983

Efficient computerized model for dynamic analysis of energy conversion systems

In searching for the optimum parameters that minimize the total life cycle cost of an energy conversion system, various combinations of components are examined and the resulting system performance and associated economics are studied. The systems performance and economics simulation computer program (SPECS) was developed to fill this need. The program simulates the fluid flow, thermal, and electrical characteristics of a system of components on a quasi-steady state basis for a variety of energy conversion systems. A unique approach is used in which the set of characteristic equations is solved by the Newton-Raphson technique. This approach eliminates the tedious iterative loops which are found in comparable programs such as TRNSYS or SOLTES-1. Several efficient features were also incorporated such as the centralized control and energy management scheme, and analogous treatment of energy flow in electrical and mechanical components, and the modeling of components of similar fundamental characteristics using generic subroutines. Initial tests indicate that this model can be used effectively with a relatively small number of time steps and low computer cost.

Hughes, R. D.↗
DOE OSTI2020

Coupling solidification kinetics with phase-behavior computations in hydrodynamic simulations of high-pressure, dynamic-compression processes

In this study, we report a numerical scheme to integrate models for the kinetics of solidification processes together with phase-behavior computations in the context of continuum-scale hydrodynamic simulations. The objective of the phase-behavior computations is to determine the pressure and temperature, given the following three sets of inputs: (1) an appropriate equation of state to describe our system, (2) the phase fraction(s) produced by the kinetic models, (3) and the volume and internal energy obtained by solving the conservation equations that govern the hydrodynamic behavior. The kinetics are assumed to be governed by the Kolmogorov–Johnson–Mehl–Avrami equation, and the nucleation and growth rates that enter into that equation are functions of the pressure and temperature produced by the phase-behavior computations. Our formulation allows for the fluid and solid phases to be at different temperatures (thermal nonequilibrium) and pressures (arising from surface-tension-induced Laplace contributions). The formulation is presented in a fairly general setting that is independent of any particular material, although we demonstrate it in some examples related to high-energy-density science applications where materials are rapidly compressed to pressures exceeding several gigapascals in less than a microsecond. We conclude with a critical evaluation of our approach and provide suggestions for future work to improve the predictive capabilities and generality of the models.

42 ENGINEERING↗
NASA NTRS1984

A convective model for turbulent mixing in rotating convection zones

The effects of rotation are included in an analytical model for the convective motions in a plane-parallel layer of an ideal fluid. The turbulent stress tensor, formed by taking products and averages of the various velocity components, is calculated for an arbitrary eddy size and shape. Heuristic formulae presented for determining the size and shape of the dominant eddy then give a fully specified stress tensor. Applications for this stress tensor in problems of stellar internal dynamics, heat flow, scalar diffusion, and dynamo theory are suggested. The resultant stresses tend to produce differential rotation profiles with rapidly rotating equators and interiors. The dynamo activity associated with these convective motions tends to occur near the lower boundary of the convection zone.

Hathaway, D. H.↗
NASA NTRS1988

Analytical study of the liquid phase transient behavior of a high temperature heat pipe

The transient operation of the liquid phase of a high temperature heat pipe is studied. The study was conducted in support of advanced heat pipe applications that require reliable transport of high temperature drops and significant distances under a broad spectrum of operating conditions. The heat pipe configuration studied consists of a sealed cylindrical enclosure containing a capillary wick structure and sodium working fluid. The wick is an annular flow channel configuration formed between the enclosure interior wall and a concentric cylindrical tube of fine pore screen. The study approach is analytical through the solution of the governing equations. The energy equation is solved over the pipe wall and liquid region using the finite difference Peaceman-Rachford alternating direction implicit numerical method. The continuity and momentum equations are solved over the liquid region by the integral method. The energy equation and liquid dynamics equation are tightly coupled due to the phase change process at the liquid-vapor interface. A kinetic theory model is used to define the phase change process in terms of the temperature jump between the liquid-vapor surface and the bulk vapor. Extensive auxiliary relations, including sodium properties as functions of temperature, are used to close the analytical system. The solution procedure is implemented in a FORTRAN algorithm with some optimization features to take advantage of the IBM System/370 Model 3090 vectorization facility. The code was intended for coupling to a vapor phase algorithm so that the entire heat pipe problem could be solved. As a test of code capabilities, the vapor phase was approximated in a simple manner.

Roche, Gregory Lawrence↗
NASA NTRS1991

Infrared imaging - A validation technique for computational fluid dynamics codes used in STOVL applications

The need for a validation technique for computational fluid dynamics (CFD) codes in STOVL applications has led to research efforts to apply infrared thermal imaging techniques to visualize gaseous flow fields. Specifically, a heated, free-jet test facility was constructed. The gaseous flow field of the jet exhaust was characterized using an infrared imaging technique in the 2 to 5.6 micron wavelength band as well as conventional pitot tube and thermocouple methods. These infrared images are compared to computer-generated images using the equations of radiative exchange based on the temperature distribution in the jet exhaust measured with the thermocouple traverses. Temperature and velocity measurement techniques, infrared imaging, and the computer model of the infrared imaging technique are presented and discussed. From the study, it is concluded that infrared imaging techniques coupled with the radiative exchange equations applied to CFD models are a valid method to qualitatively verify CFD codes used in STOVL applications.

Hardman, R. R.↗
NASA NTRS2005

Dynamic Deployment Simulations of Inflatable Space Structures

The feasibility of using Control Volume (CV) method and the Arbitrary Lagrangian Eulerian (ALE) method in LSDYNA to simulate the dynamic deployment of inflatable space structures is investigated. The CV and ALE methods were used to predict the inflation deployments of three folded tube configurations. The CV method was found to be a simple and computationally efficient method that may be adequate for modeling slow inflation deployment sine the inertia of the inflation gas can be neglected. The ALE method was found to be very computationally intensive since it involves the solving of three conservative equations of fluid as well as dealing with complex fluid structure interactions.

Wang, John T.↗
NASA NTRS2009

A CFD Approach to Modeling Spacecraft Fuel Slosh

Energy dissipation and resonant coupling from sloshing fuel in spacecraft fuel tanks is a problem that occurs in the design of many spacecraft. In the case of a spin stabilized spacecraft, this energy dissipation can cause a growth in the spacecrafts' nutation (wobble) that may lead to disastrous consequences for the mission. Even in non-spinning spacecraft, coupling between the spacecraft or upper stage flight control system and an unanticipated slosh resonance can result in catastrophe. By using a Computational Fluid Dynamics (CFD) solver such as Fluent, a model for this fuel slosh can be created. The accuracy of the model must be tested by comparing its results to an experimental test case. Such a model will allow for the variation of many different parameters such as fluid viscosity and gravitational field, yielding a deeper understanding of spacecraft slosh dynamics. In order to gain a better understanding of the dynamics behind sloshing fluids, the Launch Services Program (LSP) at the NASA Kennedy Space Center (KSC) is interested in finding ways to better model this behavior. Thanks to past research, a state-of-the-art fuel slosh research facility was designed and fabricated at Embry Riddle Aeronautical University (ERAU). This test facility has produced interesting results and a fairly reliable parameter estimation process to predict the necessary values that accurately characterize a mechanical pendulum analog model. The current study at ERAU uses a different approach to model the free surface sloshing of liquid in a spherical tank using Computational Fluid Dynamics (CFD) methods. Using a software package called Fluent, a model was created to simulate the sloshing motion of the propellant. This finite volume program uses a technique called the Volume of Fluid (VOF) method to model the interaction between two fluids [4]. For the case of free surface slosh, the two fluids are the propellant and air. As the fuel sloshes around in the tank, it naturally displaces the air. Using the conservation of mass, momentum, and energy equations, as well as the VOF equations, one can predict the behavior of the sloshing fluid and calculate the forces, pressure gradients, and velocity field for the entire liquid as a function of time.

Marsell, Brandon↗
NASA NTRS1990

A phase-space fluid simulation of a two-component narrow planetary ring - Particle size segregation, edge formation, and spreading rates

The Krook kinetic equation for identical planetary ring particles is presently generalized for the case of two-component systems, and the equations are numerically solved on the basis of Brophy and Esposito's (1989) phase-space CFD method. Attention is given to the simulation results obtained for a two-component narrow ring, in which the large particles are eight times as massive as the small particles. This ring's unconstrained edge dynamics are resolved by the simulation, and are found to exhibit a sharpening that would not have been expected in single-component rings.

Brophy, Thomas G.↗
DOE OSTI2020

Overset meshes for incompressible flows: On preserving accuracy of underlying discretizations

This study on overset meshes for incompressible-flow simulations is motivated by accurate prediction of wind farm aerodynamics involving large motions and deformations of components with complex geometry. Specifically, using first-order hyperbolic and elliptic equation proxies for the incompressible Navier-Stokes (NS) equations, we investigate the influence of information exchange between overset meshes on numerical performance where the underlying discretization is second-order accurate. The first aspect of information exchange surrounds interpolation of solution where we examine Lagrange and point-cloud-based interpolation for creating constraint equations between overset meshes. To maintain overall second-order accuracy, higher-order interpolation is required for elliptic problems, but linear interpolation is sufficient for hyperbolic problems in first-order form. Higher-order point-cloud-based interpolation provides a pathway to maintaining accuracy in unstructured meshes, but at higher complexity. The second aspect of information exchange focuses on comparing the approaches of overset single system (OSS) and overset Additive Schwarz (OAS) for coupling the linear systems of the overlapping meshes. While the former involves a single linear system, in the latter the discrete linear systems are solved separately, and solving the global system is accomplished through outer iterations and sequential information exchange in a Jacobi fashion. For the test cases studied, accuracy for hyperbolic problems is maintained by performing two outer iterations, whereas many outer iterations are required for elliptic systems. The order-of-accuracy studies explored here are critical for verifying the overset-mesh coupling algorithms used in engineering simulations. Accuracy of these simulations themselves is, however, quantified using engineering quantities of interest such as drag, power, etc. Consequently, we conclude with numerical experiments using NS equations for incompressible flows where we show that linear interpolation and few outer iterations are sufficient for achieving asymptotic convergence of engineering quantities of interest.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Degradation of performance in ICF implosions due to Rayleigh–Taylor instabilities: A Hamiltonian perspective

The Rayleigh–Taylor instability (RTI) is an ubiquitous phenomenon that occurs in inertial-confinement-fusion (ICF) implosions and is recognized as an important limiting factor of ICF performance. To analytically understand the RTI dynamics and its impact on ICF capsule implosions, we develop a first-principle variational theory that describes an imploding spherical shell undergoing RTI. The model is based on a thin-shell approximation and includes the dynamical coupling between the imploding spherical shell and an adiabatically compressed fluid within its interior. Using a quasilinear analysis, we study the degradation trends of key ICF performance metrics (e.g., stagnation pressure, residual kinetic energy, and areal density) as functions of initial RTI parameters (e.g., the initial amplitude and Legendre mode), as well as the 1D implosion characteristics (e.g., the convergence ratio). We compare analytical results from the theory against nonlinear results obtained by numerically integrating the governing equations of this reduced model. Our findings emphasize the need to incorporate polar flows in the calculation of residual kinetic energy and demonstrate that higher convergence ratios in ICF implosions lead to significantly greater degradation of key performance metrics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Motion of Air Bubbles in a Cement Slurry

The dynamics of air (gas) bubbles in a column of cement slurry is examined numerically. The air injected at the bottom of a laboratory-scale column through a porous distributor plate spatially distributes and migrates as a swarm of bubbles throughout the slurry toward the freeboard. The two-phase system of the cement slurry and the air bubbles is modeled using the conservation equations of mass and linear momentum in the framework of the volume-of-fluid (VOF) approach. The cement slurry is modeled using the Herschel–Bulkley and Bingham fluid models. Results show that the mean Sauter diameter and the mean rise velocity of the bubbles decrease with the gas flow rate. Meanwhile, it is found that the rising of the bubbles is controlled by breakup events, along with relatively weak path instabilities of the bubbles resulting in relatively straight trajectories, independent of the gas flow rate. The extent of the yielded region appears larger for the Herschel–Bulkley model compared to the Bingham fluid model (by approximately 10%).

36 MATERIALS SCIENCE↗
NASA NTRS1986

Vortical Flows Research Program of the Fluid Dynamics Research Branch

The research interests of the staff of the Fluid Dynamics Research Branch in the general area of vortex flows are summarized. A major factor in the development of enchanced maneuverability and reduced drag by aerodynamic means is the use of effective vortex control devices. The key to control is the use of emerging computational tools for predicting viscous fluid flow in close coordination with fundamental experiments. In fact, the extremely complex flow fields resulting from numerical solutions to boundary value problems based on the Navier-Stokes equations requires an intimate relationship between computation and experiment. The field of vortex flows is important in so many practical areas that a concerted effort in this area is justified. A brief background of the research activity undertaken is presented, including a proposed classification of the research areas. The classification makes a distinction between issues related to vortex formation and structure, and work on vortex interactions and evolution. Examples of current research results are provided, along with references where available. Based upon the current status of research and planning, speculation on future research directions of the group is also given.

Source record↗
NASA NTRS1994

Validation of the RPLUS3D Code for Supersonic Inlet Applications Involving Three-Dimensional Shock Wave-Boundary Layer Interactions

A three-dimensional computational fluid dynamics code, RPLUS3D, which was developed for the reactive propulsive flows of ramjets and scramjets, was validated for glancing shock wave-boundary layer interactions. Both laminar and turbulent flows were studied. A supersonic flow over a wedge mounted on a flat plate was numerically simulated. For the laminar case, the static pressure distribution, velocity vectors, and particle traces on the flat plate were obtained. For turbulent flow, both the Baldwin-Lomax and Chien two-equation turbulent models were used. The static pressure distributions, pitot pressure, and yaw angle profiles were computed. In addition, the velocity vectors and particle traces on the flat plate were also obtained from the computed solution. Overall, the computed results for both laminar and turbulent cases compared very well with the experimentally obtained data.

Kapoor, Kamlesh↗
NASA NTRS1997

On the Use of Vortex-Fitting in the Numerical Simulation of Blade-Vortex Interaction

The usefulness of vortex-fitting in the computational fluid dynamics (CFD) methods to preserve the vortex strength and structure while convecting in a uniform free stream is demonstrated through the numerical simulations of two- and three-dimensional blade-vortex interactions. The fundamental premise of the formulation is the velocity and pressure field of the interacting vortex are unaltered either in the presence of an airfoil or a rotor blade or by the resulting nonlinear interactional flowfield. Although, the governing Euler and Navier-Stokes equations are nonlinear and independent solutions cannot be superposed, the interactional flowfield can be accurately captured by adding and subtracting the flowfield of the convecting vortex at each instant. The aerodynamics and aeroacoustics of two- and three-dimensional blade-vortex interactions have been calculated in Refs. 1-6 using this concept. Some of the results from these publications and similar other published material will be summarized in this paper.

Srinivasan, G. R.↗