Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic transformers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Auxiliary matrix formalism for interaction representation transformations, optimal control, and spin relaxation theories

Auxiliary matrix exponential method is used to derive simple and numerically efficient general expressions for the following, historically rather cumbersome, and hard to compute, theoretical methods: (1) average Hamiltonian theory following interaction representation transformations; (2) Bloch-Redfield-Wangsness theory of nuclear and electron relaxation; (3) gradient ascent pulse engineering version of quantum optimal control theory. In the context of spin dynamics, the auxiliary matrix exponential method is more efficient than methods based on matrix factorizations and also exhibits more favourable complexity scaling with the dimension of the Hamiltonian matrix.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of irradiation tolerance of two MAX phases-Ti 4 AlN 3 and Ti 2 AlN

The microstructures of two MAX phases, Ti 2 AlN and Ti 4 AlN 3 , irradiated at room temperature with 70 keV He ions over a wide fluence range have been studied to reveal the dependence of MAX phase irradiation tolerance on structure. Grazing incident x-ray diffraction (GIXRD) reveals that a new set of diffraction peaks appears after ion irradiation for both MAX phases and the positions of diffraction peaks gradually shift towards lower 2θ values with increasing fluence. Transmission electron microscope characterizations show both MAX phases experience a similar structure transformation at low fluences, forming an intermediate structure. The d-spacings derived from electron diffraction analysis of intermediate structures are basically consistent with that of new peaks in GIXRD. At high fluences a nano-twinned microstructure is found in Ti 2 AlN, but no such microstructure is observed in Ti 4 AlN 3 . Based on the simulation results of electron diffractions and the irradiation responses of other MAX phases, the structure characteristics and formation mechanisms of the intermediate structure are derived and the discrepancy in the phase stability of both MAX phases at high fluences is discussed.

36 MATERIALS SCIENCE↗

Titanium-incorporated organic–inorganic hybrid adsorbent for improved CO{sub 2} adsorption performance

Highlights: • Titanium-incorporated organic–inorganic hybrid adsorbent was prepared. • The incorporation of Ti to the adsorbent showed significant effect. • The sorbent shows high CO{sub 2} capture capacity both in pure and diluted CO{sub 2} at RT. • The sorbent exhibits a high recycling stability after 15 cycling runs. - Abstract: The CO{sub 2} adsorption performance of acrylonitrile (AN)–tetraethylenepentamine (TEPA) adduct (hereafter referred to as TN) impregnated adsorbent was greatly enhanced by introduction of Titanium atom into the silica matrix. The adsorbents were characterized by X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), transmission electron microscopy (TEM), N{sub 2} adsorption/desorption, UV–vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy. The adsorption experiments together with the physicochemical characterization demonstrated that these adsorbents containing an optimal amount of Titanium (Ti/Si ≈ 0.1) remarkably reinforced the CO{sub 2} adsorption capacity and recycling stability. The highest CO{sub 2} uptakes reached 4.65 and 1.80 mmol CO{sub 2}/g adsorbent at 25 °C under 90% CO{sub 2} (CO{sub 2}/N{sub 2}, 90:10 V/V) and 1% CO{sub 2} (CO{sub 2}/N{sub 2}, 1:99 V/V) conditions for sample Ti(0.1)-DMS-TN, respectively. Repeated adsorption/desorption cycles revealed that the Ti-incorporated adsorbent showed only a tiny decrease in adsorption capacity (1.778 mmol CO{sub 2}/g adsorbent after 15 cycles, decreased by 0.95%), significantly enhanced the adsorbent recycling stability.

36 MATERIALS SCIENCE↗

Adsorption of Nickel Ion in Aqueous Using Rubber-Based Hydrogel

This work reports about a rubber-based hydrogel from liquid natural rubber (LNR) and acrylic acid (AAc) by using potassium persulfate (KPS) as an initiator and N,N-methylenebisacrylamide (MBA) as a crosslinking agent. The structure, stability, and morphology of the hydrogel were confirmed by using Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscope. The optimisation of the swelling capacity and Ni{sup 2+} removal percentage by the rubber-based hydrogel was conducted by using 5-level-2-factor response surface methodology. The effect of AAc:LNR ratio (0.59–3.41 g/g) and MBA concentration (0.02–0.23 M) parameters was studied with constant KPS concentration (0.05 M) used. Quadratic models for both responses (swelling and Ni{sup 2+} removal percentage) were successfully developed by using statistical analysis. The swelling degree and Ni{sup 2+} removal percentage of hydrogel were improved when high AAc:LNR ratio and lower MBA concentration were used. The R{sup 2} values for these quadratic models were 0.9891 and 0.9939 (swelling and Ni{sup 2+} removal percentage), respectively, which showed that the models were well-fitted with the experimental data. From the analysis, the optimum conditions for maximum swelling capacity (1181.90%) and Ni{sup 2+} removal percentage (26.74%) were hydrogel with AAc:LNR ratio 3.00 g/g and 0.05 M of MBA.

36 MATERIALS SCIENCE↗

Effect of ausforming on the anisotropy of low temperature bainitic transformation

Ausforming is the process by which austenite is plastically deformed prior to bainitic or martensitic transformation. The advantages of such a process on the kinetics of the bainitic transformations have already been reported, but little is found about the effect on the morphology and crystallography of the final microstructure, and in most cases the studies deal with high C steels. Since ausforming has been suggested to be an alternative to transfer the concept of nanostructured bainite to medium carbon contents, the necessity to study the effect of prior plastic deformation on the subsequent bainitic transformation in those steels arises. By means of techniques such as high-resolution dilatometry, scanning electron microscopy, electron backscatter diffraction and X-Ray diffraction, it has been proven that, in a medium carbon steel (0.4 wt%), the macroscopic isotropy that characterizes the bainitic transformation can be altered, under certain conditions, by plastically deforming austenite prior to transformation. The alteration is such that, at low temperatures, the interpretation of the dilatometric response or the plate thickness measurements can be hindered. In addition, the final microstructure is also affected, presenting highly ordered bainitic ferrite plates, most of them correspondent to specific crystallographic variants.

36 MATERIALS SCIENCE↗

The pure rotational spectra of the open-shell diatomic molecules PbI and SnI

Pure rotational spectra of the ground electronic states of lead monoiodide and tin monoiodide have been measured using a chirped pulsed Fourier transform microwave spectrometer over the 7-18.5 GHz region for the first time. Each of PbI and SnI has a X {sup 2}Π{sub 1/2} ground electronic state and may have a hyperfine structure that aids the determination of the electron electric dipole moment. For each species, pure rotational transitions of a number of different isotopologues and their excited vibrational states have been assigned and fitted. A multi-isotopologue Dunham-type analysis was carried out on both species producing values for Y{sub 01}, Y{sub 02}, Y{sub 11}, and Y{sub 21}, along with Λ-doubling constants, magnetic hyperfine constants and nuclear quadrupole coupling constants. The Born-Oppenheimer breakdown parameters for Pb have been evaluated and the parameter rationalized in terms of finite nuclear field effects. Analysis of the bond lengths and hyperfine interaction indicates that the bonding in both PbI and SnI is ionic in nature. Equilibrium bond lengths have been evaluated for both species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control, Fault Management, and Grid Support Functionality of an MV AC-DC Solid State Transformer based EV Extreme Fast Charging Station

Electric vehicles (EVs) have become increasingly popular in recent times while revolutionizing the consumer and commercial transportation market. The development of charging infrastructure has become one of the priorities for increasing the adoption of EVs. Extreme fast charging (XFC) technology can reduce the so-called ’range anxiety’ of consumers as they significantly reduce the charging time. With the advent of wide band-gap (WBG) power devices and improvement in power electronic converters, medium voltage (MV) solid state transformer (SST) based XFC system has the potential to replace the traditional XFC stations because of the lower footprint, ease of installation, enhanced control feature, and better system efficiency. The control system design is one of the critical aspects of the SST development process. Careful consideration and detailed analysis are required to find out suitable control method for the SST based on its topology among different centralized and decentralized control architectures. Also, the control parameters selection and potential improvement to the transient response of the controller ought to be investigated. Another major concern of the SST is different types of internal fault which reduces the overall reliability of the XFC system. As a result, designing a robust protection system is essential. Among different fault modes, open circuit switch faults have received significant attention as an active research area because of their likelihood and severe effects on converters. Therefore, the power stages used in the XFC system require functional and accurate open circuit switch fault management methods. An equally significant aspect of this SST based XFC is its compatibility in a microgrid where there is no synchronous generator present. When the grid is not available, the XFC SSTs can provide grid forming capability and continue supplying the critical loads in islanded mode. The transition between grid connected and islanded mode, especially the grid resynchronization process has to be carefully performed for the safety of the microgrid components. The challenges posed by the aforementioned issues have inspired the work done in this dissertation. Here, a 13.2 kV, 1 MVA, AC/DC SST for the XFC system is examined and a comparative analysis is conducted to select the control architecture based on feasibility of implementation and performance. A detailed control parameter design process is demonstrated considering the sensor dynamics and delay. The selected decentralized control method is augmented by introducing a novel sensor-less load current feedforward method to provide better voltage regulation at the DC bus during a change of load. Next, in the fault management section, a hierarchical failure mode effect analysis (FMEA) is proposed to enable a systematic design of the internal fault protection of the XFC SST as there are limited examples in the literature regarding the analysis of the safety and design of the protection of a power electronic converter system. Novel open circuit switch fault management methods for the converters in the system are presented. Finally, XFC SST based MV microgrid operations in grid connected mode and islanded mode are explored. A secondary control method for grid resynchronization is presented and a design process of control parameters is shown to ensure the stability of the secondary voltage and frequency regulation.

30 DIRECT ENERGY CONVERSION↗

Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples' structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N{sub 2} adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation f{sub t}=kt{sup n} was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties. - Graphical abstract: Loading (A) and release profiles (B) of aspirin in N-BMMs and N-MCM-41 indicated that BMMs have more drug loading capacity and faster release rate than that MCM-41. Highlights: > Bimodal mesoporous silicas (BMMs) and MCM-41 modified with amino group via post-treatment procedure. > Loading and release profiles of aspirin in modified BMMs and MCM-41. > Modified BMMs have more drug loading capacity and faster release rate than that modified MCM-41.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deformation and Failure Mechanisms of Shape Memory Alloys

The goal of this research was to understand the fundamental mechanics that drive the deformation and failure of shape memory alloys (SMAs). SMAs are difficult materials to characterize because of the complex phase transformations that give rise to their unique properties, including shape memory and superelasticity. These phase transformations occur across multiple length scales (one example being the martensite-austenite twinning that underlies macroscopic strain localization) and result in a large hysteresis. In order to optimize the use of this hysteretic behavior in energy storage and damping applications, we must first have a quantitative understanding of this transformation behavior. Prior results on shape memory alloys have been largely qualitative (i.e., mapping phase transformations through cracked oxide coatings or surface morphology). The PI developed and utilized new approaches to provide a quantitative, full-field characterization of phase transformation, conducting a comprehensive suite of experiments across multiple length scales and tying these results to theoretical and computational analysis. The research funded by this award utilized new combinations of scanning electron microscopy, diffraction, digital image correlation, and custom testing equipment and procedures to study phase transformation processes at a wide range of length scales, with a focus at small length scales with spatial resolution on the order of 1 nanometer. These experiments probe the basic connections between length scales during phase transformation. In addition to the insights gained on the fundamental mechanisms driving transformations in shape memory alloys, the unique experimental methodologies developed under this award are applicable to a wide range of solid-to-solid phase transformations and other strain localization mechanisms.

36 MATERIALS SCIENCE↗

Proton-Coupled Electron Transfer to a Molybdenum Ethylene Complex Yields a β-Agostic Ethyl: Structure, Dynamics and Mechanism

In this paper, the interconversion of molybdenum ethylene and ethyl complexes by proton-coupled electron transfer (PCET) is described, an unusual transformation in organometallic chemistry. The cationic molybdenum ethylene complex [( Ph Tpy)(PPh 2 Me) 2 Mo(C 2 H 4 )][BArF 24 ] ([1-C 2 H 4 ] + ; Ph Tpy = 4'-Ph-2,2',6',2"-terpyridine, ArF 24 = [C 6 H 3 -3,5-(CF 3 ) 2 ] 4 ) was synthesized, structurally characterized, and its electronic structure established by a combination of spectroscopic and computational methods. The overall electronic structure is best described as a molybdenum(III) complex with a metallacyclopropane and a redox neutral terpyridine ligand. Addition of the nonclassical ammine complex [( Ph Tpy)(PPh 2 Me) 2 Mo(NH 3 )][BArF 24 ] ([1-NH 3 ] + ) to [1-C 2 H 4 ] + resulted in a net C–H bond-forming PCET reaction to yield the molybdenum ethyl [( Ph Tpy)(PPh 2 Me) 2 Mo(CH 2 CH 3 )][BArF 24 ] ([1-CH 2 CH 3 ] + ) and amido [( Ph Tpy)(PPh 2 Me) 2 Mo(NH 2 )][BArF 24 ] ([1-NH 2 ] + ) compounds. The reaction was reversed by addition of 2,4,6-tritert-butylphenoxyl radical to [1-CH 2 CH 3 ] + . The solid-state structure of [1-CH 2 CH 3 ] + established a β-agostic ethyl ligand that is maintained in solution as judged by variable temperature 1 H and 13 C NMR experiments. A combination of variable-temperature NMR experiments and isotopic labeling studies were used to probe the dynamics of [1-CH 2 CH 3 ] + and established restricted β-agostic -CH 3 rotation at low temperature (ΔG ‡ = 9.8 kcal mol –1 at -86 °C) as well as ethyl isomerization by β-hydride elimination-olefin rotation-reinsertion (ΔH ‡ = 19.3 ± 0.6 kcal mol –1 ; ΔS ‡ = 3.4 ± 1.7 cal mol –1 K –1 ). The β-(C–H) bond-dissociation free energy (BDFE) in [1-CH 2 CH 3 ] + was determined experimentally as 57 kcal mol –1 (THF) supported by a DFT-computed value of 52 kcal/mol –1 (gas phase). Comparison of pK a and electrochemical data for the complexes [1-C 2 H 4 ] + and [1-NH 3 ] + in combination with a deuterium kinetic isotope effect (k H /k D ) of 3.5(2) at 23 °C support a PCET process involving initial electron transfer followed by protonation leading to the formation of [1-CH 2 CH 3 ] + and [1-NH 2 ] + or a concerted pathway. Lastly, the data presented herein provides a structural, thermochemical and mechanistic foundation for understanding the PCET reactivity of organometallic complexes with alkene and alkyl ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cysteine Substitutions on the Structural and Magnetic Properties of Fe{sub 3}O{sub 4}–Cysteine/RGO and Fe{sub 3}O{sub 4}/RGO–Cysteine Nanocomposites

We synthesized by electrostatic self-assembly route in basic solution Fe{sub 3}O{sub 4}–cysteine/RGO and Fe{sub 3}O{sub 4}/RGO–cysteine nanocomposites. In this method, electrostatic interaction was created via negatively charged surface of the reduced graphene oxide and reduced graphene oxide–cysteine sheets and positively charged surface of the Fe{sub 3}O{sub 4} and Fe{sub 3}O{sub 4}–Cys nanoparticles in aqueous solution. The structural and magnetic properties of the prepared samples were analyzed by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM), respectively. The dependences of magnetization as a function of applied field using a vibrating sample magnetometer exhibit S-like curves, indicating a magnetic hysteresis behavior for all samples. It clearly showed that, the nanocomposites showed a reduction of saturation magnetization to the Fe{sub 3}O{sub 4} nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of NiCuZn-ferrite powders by means of mechanochemical treatment

Graphical abstract: The peak intensity for the product calcined at 500 °C is relatively weak, but it gradually increases with increasing the temperature. This implies that the temperature up to 700 °C leads to well crystallization of the spinel type of Ni{sub 0.45}Cu{sub 0.05}Zn{sub 0.5}Fe{sub 2}O{sub 4} phase. - Highlights: • NiCuZn-ferrite powders were obtained at a low temperature by mechanochemical activation. • The effects of the mechanical and thermal treatments on the mixtures were analyzed. • The mechanochemical method benefited achieving the lower M{sub s} and μ{sub i}. - Abstract: NiCuZn-ferrite powders were synthesized by mechanochemical treatments using NiCO{sub 3}⋅2Ni(OH){sub 2}⋅4H{sub 2}O, CuO, ZnO and Fe{sub 2}O{sub 3} as raw materials. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometer (VSM) were employed to evaluate the morphologies and structures of samples. The results indicated that the mechanochemical treatment produced several structural and chemical effects on reactants of the powder mixtures, and single phase Ni{sub 0.45}Cu{sub 0.05}Zn{sub 0.5}Fe{sub 2}O{sub 4} could be obtained after annealed at 700 °C for 2 h. In comparison with the traditional firing method, the mechanochemical method benefited achieving the lower M{sub s} and μ{sub i}, which indicated that the sample had better magnetic properties.

36 MATERIALS SCIENCE↗

Improvement of the titanium implant biological properties by coating with poly (ε-caprolactone)-based hybrid nanocomposites synthesized via sol-gel

When bioactive coatings are applied to medical implants by means of sol-gel dip coating technique, the biological proprieties of the implant surface can be modified to match the properties of the surrounding tissues. In this study organo-inorganic nanocomposites materials were synthesized via sol-gel. They consisted of an inorganic zirconium-based and silica-based matrix, in which a biodegradable polymer (the poly-ε-caprolactone, PCL) was incorporated in different weight percentages. The synthesized materials, in sol phase, were used to dip-coat a substrate of commercially pure titanium grade 4 (CP Ti gr. 4) in order to improve its biological properties. A microstructural analysis of the obtained films was carried out by scanning electron microscopy (SEM) and attenuated total reflectance (ATR) Fourier transform infrared spectroscopy (FT-IR). Biological proprieties of the coated substrates were investigated by means of in vitro tests.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Deciphering Extreme Mineral Records; Microstructural Phase Heritage of Shocked Materials

High-pressure minerals such as coesite, stishovite, and reidite are often used as indicators of shock metamorphism. However, high-pressure and high-temperature phases are metastable at ambient conditions and, therefore, often revert to a more energetically favorable phase. During solid-state transformations, the crystallographic orientations of the stable polymorph are controlled by the transformation pathway from the parent. Microstructural orientation analysis using electron backscatter diffraction (EBSD) of the stable phase can reveal systematic intercrystalline orientation relationships (OR) diagnostic of solid-state transformations from these high-pressure or high-temperature polymorph phases (Cayron et al., 2006). Knowledge of polymorph stability fields for a given system can thus be used to infer minimum shock P and/or T conditions that rocks have experienced, which are otherwise unavailable using traditional thermobarometers such as element partition coefficients. Using orientation relationships to infer the former presence of mineral phases has been termed microstructural “phase heritage”, and has successfully been used to probe for evidence of extreme pressures and temperatures resulting from hypervelocity impacts. The reconstruction of polymorphs of ZrSiO4 (zircon, reidite) and ZrO2 (baddeleyite) have further elucidated the behavior of these phases under hypervelocity impact conditions (Timms et al., 2017a; White et al., 2018), and OR analysis of shocked monazite has identified a previously unrecognized tetragonal high-P polymorph (Erickson et al., 2019). Zircon will convert to the low tetragonal polymorph reidite at shock stresses above ~21 GPa. However, upon decompression at temperatures above 1200 °C reidite will revert to zircon (Kusaba et al., 1985). Recrystallized zircon neoblasts encased in impact melt often show systematic misorientation relationships of 90° about <110> indicative of reversion from the reidite (Fig. 1), and preserving cryptic evidence of the high-P history that is often erased by the post shock thermal spike (Cavosie et al., 2016). Microstructural OR analysis of a dissociated zircon corona composed of baddeleyite (monoclinic-ZrO2) has identified the former presence of cubic zirconia within impact melt glass from the Mistastin Lake impact structure, Labrador, CA. Based on stability fields in the ZrO2-SiO2 binary phase diagram, cubic zirconia records thermal conditions in excess of 2370 °C at ambient P, indicating that the Mistastin impact melt is the hottest rock identified on Earth’s surface (Timms et al., 2017b). Shock-deformed monazite (monoclinic La,Ce,ThPO4) containing lamellae comprised of interlocking laths has been identified from the Haughton Dome impact structure, Nunavut, Canada and Nördlinger-Ries Crater, southern Germany. The lath-structured lamellae are composed of four systematic orientation variants, which OR analyses indicate originate from a tetragonal parent whereby the [010]monoclinic aligns with either [100] or [010]tetragonal (Erickson et al., 2019). These results highlight utility of microstructural phase heritage analyses for the identification of unstable high-P or high-T polymorphs that uniquely record the extremely transient shock conditions produced by hypervelocity impacts.

Timmons Erickson↗

Molecular-Resolution Electron Imaging of Defects and Dynamics at the Ice-Water Interface

Water crystallization into hexagonal ice (type I h ) is one of the most critical processes relevant to the Earth’s environment and human activities. However, despite recent breakthroughs in imaging non-equilibrium condensed ice structures, the ice-water interface has never been imaged at a molecular resolution. This is primarily due to the low stability of the hydrogen bonds in ice under high-resolution microscopy conditions and a lack of methods to prepare compatible samples. Here, this presentation describes the first molecular-resolution imaging of ice crystallized from liquid water and the ice-water interface using high-resolution transmission electron microscopy (HRTEM). By encapsulating deionized (DI) water between two amorphous carbon (a-C) TEM grids and subsequently freezing it with liquid N 2 on a cryo sample stage, we generated two types of ice: non-equilibrium, condensed ice from the atmosphere and encapsulated ice from the DI water (Fig. 1A). Condensed ice usually shows irregular, spherulitic shapes (Fig. 1B). Selected area electron diffraction (SAED) shows that they are a mixture of cubic and hexagonal crystals (Fig. 1C). On the contrary, encapsulated ice forms thin films that contain large-area single-crystalline regions of hexagonal ice oriented along the [0001] zone axis (Fig. 1D). Differential electron energy-loss spectroscopy (EELS) confirmed the high purity of the encapsulated ice free from organic contaminations that are common in other encapsulation methods for HRTEM such as graphene liquid cells. These single-crystalline areas are robust under the electron beam up to ~100 e/Å 2 s. Aberration-corrected HRTEM imaging in these areas achieved a line resolution of ~1.3 Å (Fig. 1E and F). This platform allows us to study near-equilibrium ice structures and dynamics at an unprecedented spatial resolution (Fig. 2). For example, we discovered subdomain-rich regions near the defective crystal edges despite the structure appearing single-crystalline according to diffraction criteria. These subdomains connect via low-angle grain boundaries with flat energy landscapes as a function of tilt angles (according to simulations), showing the high tolerance of ice to defect structures. When we tuned the sample temperature and electron flux rate, we observed radiolysis-controlled bubble generation and dissolution in ice single crystals near a steady state of bubble dynamics. Furthermore, rich beam-induced melting and recrystallization dynamics were observed at the ice-water interface with lattice resolution. These data represent the first observation of the ice-water phase transformation at the sub-nanometer level. In summary, the methods developed in this work enabled molecular-resolution observations of ice and the ice-water interface and shed light on the microstructures and phase transformation pathways. Finer control on the temperature, electron irradiation profile, and imaging detector could eventually lead to real-time observation of ice nucleation in water and address long-standing questions in the nucleation pathways.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electronic structure simulations in the cloud computing environment

The transformative impact of modern computational paradigms and technologies, such as high-performance computing, quantum computing, and cloud computing, has opened up profound new opportunities for scientific simulations. Scalable computational chemistry is one beneficiary of this technological progress. The main focus of this paper is on the performance of various quantum chemical formulations, ranging from low-order methods to high-accuracy approaches, implemented in different computational chemistry packages, such as NWChem, NWChemEx, SPEC, ExaChem, and FLOSIC codes on the Azure Quantum Element (AQE) Microsoft cloud services. We pay particular attention to the intricate workflows for performing composite chemistry simulations, associated data curation, and mechanisms for accuracy assessment, as defined by the enabling cloud Computational Chemistry as a Service (CCaaS). Our focus also extends to Arrows' automated workflow for high throughput simulations. Finally, we provide a perspective on the role of cloud computing in supporting the mission of leadership computational facilities (LCFs).

computational chemistry, electronic structure, Clo↗

General study on the crystal, electronic and band structures, the morphological characterization, and the magnetic properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite

A comprehensive investigation of the general properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite was undertaken. Crystal structure characterization performed by X-ray diffraction measurements and Rietveld analysis allowed establishing that the material crystallizes in a distorted monoclinic perovskite-like structure belonging to the P2{sub 1}/n (#14) space group, with alternating distribution of Dy{sup 3} {sup +} (2c: 0, 0.5, 0) and Ru{sup 5} {sup +} (2d: 0.5, 0, 0). Because of the mismatch in the ionic radii, the DyO{sub 6} and RuO{sub 6} octahedra are forced to tilt around the cubic directions so as to optimize the Sr–O inter-atomic bond lengths. Morphological characterization carried out by scanning electron microscopy indicated a particle size D = 37.17 nm and an activation energy Q = 109.8 kJ/mol. Semi-quantitative compositional study, performed through energy-dispersive X-ray experiments, corroborated that the pure phase of the Sr{sub 2}DyRuO{sub 6} was correctly obtained. Magnetic properties determined from the fit of the Curie–Weiss law to the curves of magnetic susceptibility as a function of temperature showed that Sr{sub 2}DyRuO{sub 6} exhibits an antiferromagnetic-like behavior at low temperatures as a consequence of a magnetic transition at T = 38 K. Data collected with respect to the field dependence of the magnetization showed the existence of a weak ferromagnetic moment relationship with antiferromagnetic-like behavior. Density functional theory allowed establishing the optimum electronic structure for Sr{sub 2}DyRuO{sub 6}, and the study of the density of states showed that Dy{sup 3} {sup +} and Ru{sup 5} {sup +} are responsible for the magnetic character of the compound, with the prediction that at T = 0 K it behaves as a half-metallic material. The spin magnetic moment of the cell is close to 16 μ{sub B}, and the integer number of Bohr magneton is a signature of half-metallic character. Evolution of crystal structure at high temperature revealed that Sr{sub 2}DyRuO{sub 6} does not undergo any structural phase transitions, since the Bragg reflections [hkl] do not undergo changes, and the structure is preserved. - Highlights: • General properties of the Sr{sub 2}DyRuO{sub 6} complex perovskite are widely discussed. • Structural description of octahedral distortions from X-ray diffraction analysis is performed. • Morphological and compositional characteristics are related with the physical properties reported. • Antiferromagnetic response is discussed form experimental results. • Theoretical calculations reveal the possible half-metallic character of material.

36 MATERIALS SCIENCE↗

Facile preparation of CuO/g-C3N4 with enhanced photocatalytic degradation of salicylic acid

Highlights: • CuO /g-C{sub 3}N{sub 4} sheets were prepared by using a novel one-pot method. • CuO/g-C{sub 3}N{sub 4} exhibited higher catalytic activity than the parent g-C{sub 3}N{sub 4} material. • The increased photocatalytic activity was proposed. - Abstract: CuO particles supported on graphitic carbon nitride (g-C{sub 3}N{sub 4}) nanosheeets were prepared using a novel one-pot method. In the presence of ammonium nitrate, different mass ratios of copper nitrate/melamine were used to fabricate these catalysts, which were characterized using XRD, N{sub 2}-physisorption, FT-IR, TEM, XPS and UV–vis analysis. The catalytic performance of CuO/g-C{sub 3}N{sub 4} was evaluated by photodegrading salicylic acid under visible-light irradiation. Among these novel catalysts, CuO(1.0)/g-C{sub 3}N{sub 4} was found to exhibit the highest catalytic activity, which was more than 100% greater than the parent g-C{sub 3}N{sub 4} material. The improved photocatalytic properties of CuO/g-C{sub 3}N{sub 4} may be ascribed to the formation of p-n heterojunctions between CuO and g-C{sub 3}N{sub 4}, resulting in the effective separation of photogenerated electron-hole pairs and the enhanced absorption of visible light. Furthermore, the CuO/g-C{sub 3}N{sub 4} composites had excellent stability and reused for five times without obvious loss of activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗