Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effective diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Water reactive polyurethane grouting for deep vadose zone contaminant immobilization

Contaminants in the deep vadose zone (DVZ) pose a long-term threat to groundwater, human health, and the environment. Polyurethane grouting is a type of chemical grouting that is potentially advantageous in immobilizing contaminants in DVZs. Polyurethane resin has low viscosity that makes it feasible to penetrate and fill the pore space between fine particles. Here, in this study a series of laboratory pressure grouting and leaching tests were conducted to simulate and assess the effectiveness of polyurethane grouting for immobilizing contaminants in DVZs. Soil with fine particles was prepared with 127 I (as iodide) that served as a non-radioactive surrogate for radioactive 129 I. After grouting and curing, leaching tests were used to measure and compare contaminant diffusivity and leachability index values. Additionally, changes in porosity and saturated hydraulic conductivity of grouted soil were measured. X-Ray Computer Tomography (XCT) results showed that the cured polyurethane was distributed nearly homogeneously and approximately half of the voids were filled with cured polyurethane. Grouting reduced the saturated hydraulic conductivity of soil by 37 %. The effective diffusivity decreased by more than 80 % as compared with the ungrouted soil. The leachability index of the grouted soil was 6.5; meeting the criteria established by the U.S. Nuclear Regulatory Commission (NRC) standard. The results obtained in this study provide a valuable assessment of polyurethane grouting for iodide immobilization in the DVZ and indicate this approach may be a viable method for contaminant remediation in DVZ soils.

Contaminant Diffusion↗
NASA NTRS1980

Proposed method for degassing metals for extreme low pressures

Metal outgassing currently limits the pressures attained in vacuum chambers. The dominant residual gas in a carefully degassed metal system is usually hydrogen. The atomic hydrogen within bulk metals could be removed by diffusion processes if surface effects did not interfere. It is proposed that removing the surface hydrogen during vacuum bakeout by continuous electron bombardment (or similar irradiation) would allow the diffusion to proceed and lead to lower outgassing rates and operating pressures.

Moore, B. C.↗
DOE OSTI2019

Complete the Design of Benchtop Fiber-Optic Based Photo-Thermal Radiometry System

Thermal transport properties of nuclear fuels, i.e., thermal conductivity and diffusivity, are critical parameters in the thermal design of a nuclear reactor. It is well known that thermal transport properties change temporally and spatially due to dynamic microstructural evolution as a result of neutron irradiation. A real-time instrument to monitor the local thermal property change, which can survive the harsh in-pile environment, will give researchers unprecedented access to fuel behavior during irradiation. Laser-based photothermal techniques are an ideal candidate to accomplish this specific task, because of the remote, non-contact, and non-destructive features. In this report, we present the progress in the development of a bench-top photothermal radiometry (PTR) system to measure the thermal diffusivity of solid samples, and the preliminary design of a fiber-based PTR instrument to measure the real-time, in-pile thermal diffusivity of nuclear fuels. The PTR technique measures the local temperature response from a modulated heat source by detecting the sample radiation heat flux. Initially a well-developed thermal wave analytical model was fit to the data to obtain the thermal diffusivity. However, systematic errors from the diffraction effect and non-linearity issues resulted in thermal diffusivity measurements higher than literature values. These effects have been studied and an improved analytical model has been developed, and the physics behind the phenomena are still under investigation. A procedure for optimizing measurements from the bench-top system has been provided. The experiences from the bench top measurement were then used to guide the fiber-based system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1936

A turbulence indicator utilizing the diffusion of heat

This report describes a method of determining the turbulence in wind tunnels. The effect of turbulence upon the diffusion of heat from a small electrically heated wire in an air stream was investigated. The turbulence of the stream was introduced by a series of geometrically similar screens placed one at a time across the upstream section of the tunnel. With the wire set at various distances from the screens, curves of temperature distribution were obtained by traversing the heated wake at a distance of 2 inches behind the wire with a small thermocouple.

Schubauer, G B↗
NASA NTRS2000

Transitional Gas Jet Diffusion Flames in Microgravity

Drop tower experiments were performed to identify buoyancy effects in transitional hydrogen gas jet diffusion flames. Quantitative rainbow schlieren deflectometry was utilized to optically visualize the flame and to measure oxygen concentration in the laminar portion of the flame. Test conditions consisted of atmospheric pressure flames burning in quiescent air. Fuel from a 0.3mm inside diameter tube injector was issued at jet exit Reynolds numbers (Re) of 1300 to 1700. Helium mole percentage in the fuel was varied from 0 to 40%. Significant effects of buoyancy were observed in near field of the flame even-though the fuel jets were momentum-dominated. Results show an increase of breakpoint length in microgravity. Data suggest that transitional flames in earth-gravity at Re<1300 might become laminar in microgravity.

Agrawal, Ajay K.↗
DOE OSTI2020

Se diffusion in CdTe thin films for photovoltaics

Manipulating CdSeTe bandgrading to enhance photocurrent and carrier lifetime is an essential part of high-performance CdTe photovoltaics (PVs). Here, we examine Se diffusion kinetics in single-crystal and polycrystalline CdTe during deposition, thermal annealing, and CdCl 2 treatments. Se distributions are determined by dynamic secondary-ion-mass spectroscopy and Auger electron spectroscopy depth profiling and coupled with electron backscatter diffraction images of the crystalline structure. Effective bulk and grain boundary diffusion coefficients are determined by analytical models and discussed in the context of processing and film morphology. Se is found to diffuse in CdTe at much higher rates during CdCl 2 treatments than with thermal processing alone. GB diffusion also occurs at a significantly faster rate than bulk diffusion. As a result of these two effects, the near interface bulk and GB Se diffusion during CdCl 2 treatments dominates the bandgrading profiles in CdTe PVs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Diffusion of cesium in oxidized and unoxidized IG-110 nuclear graphite

Time-release diffusion measurements of cesium have been conducted over the temperature range 1073 K – 1973 K on oxidized and unoxidized IG-110 graphite. Four cesium concentrations were tested to investigate the concentration dependence of the diffusion coefficient. Two levels of oxidation were tested and compared to unoxidized concentration-matched sets to explore the effects of graphite oxidation. Here, the results demonstrate that cesium diffusion coefficient in unoxidized IG-110 graphite is independent of concentration within the range 34 – 163 µg Cs/g graphite . Above this, the effective cesium diffusion coefficient changes with concentration. The diffusion coefficient was increased by a factor of 2–12 in the oxidized set with 7.8% mass loss. These results can be used to aid predictive modeling of cesium diffusion in HTGR cores.

36 MATERIALS SCIENCE↗
DOE OSTI2018

On the Relationship Between Fault Permeability Increases, Induced Stress Perturbation, and the Growth of Aseismic Slip During Fluid Injection

Fluid injections into the deep subsurface can, at times, generate earthquakes, but often, they only produce aseismic deformations. Here we analyze the influence of fault hydromechanical properties on the growth of injection-induced aseismic slip. Using hydromechanical modeling, we show how permeability enhancement in addition to the background stress and frictional weakening has an important effect on the pressure diffusion and slip growth during injection. We find that the more pronounced the fault permeability enhancement, the stronger is the growth of the aseismic slip zone. The effect of enhanced permeability is more pronounced when the fault is initially close to failure. Our results show that aseismic slip grows beyond the pressurized zone when the fault permeability increases, while slip remains behind the pressurized zone when permeability does not vary from its initial preslip value. Furthermore, fault permeability increases should be considered as complementary mechanism to current models of fluid-induced aseismic slip.

58 GEOSCIENCES↗
DOE OSTI2024

Theoretical examination of nuclear spin diffusion in light-induced spin coherences in photosystem I

Microsecond coherence times are predicted in spin dynamics calculations of a donor–acceptor electron spin pair P + A 1A - created upon light excitation of photosystem I (PSI). The effects of nuclear spin diffusion (NSD) due to the anisotropic protein environment on the predicted coherence times T M are studied. Closely positioned pairs and triples of protons located 5–8 Å from the electron spin are shown to largely control T M . Additionally, knowledge of the crystal structure of PSI allows for spin dynamics calculations where specific cofactors and amino acid residues are removed or replaced and the identification of anisotropic environmental features controlling electronic decoherence. Finally, we show that NSD alone cannot explain the >3× shorter experimentally observed coherence times and suggest that methyl groups at key protein sites may explain this discrepancy.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2019

Effects of MnS Inclusions on the Banded Microstructure in Non-quenched and Tempered Steel

The effects of MnS inclusions in a non-quenched and tempered steel on banded ferrite/pearlite (F/P) microstructure have been studied in this investigation. The results show that the banded microstructure is mainly caused by fluctuations in the concentration of alloying elements such as Mn and Cr, which were determined by energy dispersive spectroscopy. As a manganese-rich precipitate, MnS inclusions might produce extra effects on the banded microstructure and diffusion behavior of alloying elements depending on their size and distribution. Large-sized MnS inclusions distributed within pearlite bands retard the diffusion process of alloying elements, and accordingly, aggregate the degree of banding. On the contrary, small-sized MnS inclusions are much smaller than average grain size, which have little effects on the diffusion of alloying elements on a large scale, and they can promote the nucleation of ferrite and lead to a uniform distribution of ferrite and pearlite. An extended homogenization treatment at high temperatures can convert large-sized MnS inclusions into evenly dispersed smaller inclusions, and accordingly reduce the effect of MnS inclusions on the final microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Suppression of vacancy cluster growth in concentrated solid solution alloys

Large vacancy clusters, such as stacking-fault tetrahedra, are detrimental vacancy-type defects in ion-irradiated structural alloys. Suppression of vacancy cluster formation and growth is highly desirable to improve the irradiation tolerance of these materials. In this paper, we demonstrate that vacancy cluster growth can be inhibited in concentrated solid solution alloys by modifying cluster migration pathways and diffusion kinetics. The alloying effects of Fe and Cr on the migration of vacancy clusters in Ni concentrated alloys are investigated by molecular dynamics simulations and ion irradiation experiment. While the diffusion coefficients of small vacancy clusters in Ni-based binary and ternary solid solution alloys are higher than in pure Ni, they become lower for large clusters. This observation suggests that large clusters can easily migrate and grow to very large sizes in pure Ni. In contrast, cluster growth is suppressed in solid solution alloys owing to the limited mobility of large vacancy clusters. Finally, the differences in cluster sizes and mobilities in Ni and in solid solution alloys are consistent with the results from ion irradiation experiments.

36 MATERIALS SCIENCE↗
NASA NTRS1989

A theoretical study of fluid forces on a centrifugal impeller rotating and whirling in a vaned diffuser

The fluid forces on a centrifugal impeller rotating and whirling in a vaned diffuser are analyzed on the assumption that the number of impeller and diffuser vanes is so large that the flows are perfectly guided by the vanes. The flow is taken to be two dimensional, inviscid, and incompressible, but the effects of impeller and diffuser losses are taken into account. It is shown that the interaction with the vaned diffuser may cause destabilizing fluid forces. From these discussions, it is found that the whirling forces are closely related to the steady head-capacity characteristics of the impeller. This physical understanding of the whirling forces can be applied also to the cases with volute casings. At partial capacities, it is shown that the impeller forces change greatly when the flow rate and whirl velocity are near to the impeller or vaned diffuser attributed rotating stall onset capacity, and the stall propagation velocity, respectively. In such cases the impeller forces may become destabilizing for impeller whirl.

Tsujimoto, Yoshinobu↗
NASA NTRS1995

Dynamic response of a pulsed Burke-Schumann diffusion flame

Turbulent flames are often envisioned as an ensemble of random vortices interacting with the combustion process. A better understanding of the vortex-flame interactions therefore would be useful in improving the modeling of turbulent diffusion flames. Substantial simplification may be made by investigating controlled interactions in a laminar flame, as opposed to random interactions in a turbulent flame. The general goals of the research project are to improve our understanding of (1) the influence of buoyancy on co-flow diffusion flames and (2) the effects of buoyancy on vortex-flame interactions in co-flow diffusion flames. As a first step toward objective (2), we conducted a joint experimental and numerical investigation of the vortex-flame interaction. Vortices were produced by mechanically pulsing the fuel flow at a low frequency, e.g., 10 Hz. Experiments were conducted using a nonflickering Burke-Schumann flame in both microgravity (mu-g) and normal gravity (1g) as a means of varying the buoyant force without modification of the pressure (i.e., density). The effects of buoyant convection may then be determined by a comparison of the mu-g and 1g results. The mu-g results may also reveal the important mechanisms which are masked or overwhelmed by buoyant convection in 1g. A numerical investigation was conducted using a validated, time-accurate numerical code to study the underlying physics during the flame interaction and to assist the interpretation of the experimental results.

Sheu, Jyh-Cherng↗
DOE OSTI2019

Hydrogen diffusion across interfaces in zirconium

In order to study the effects of Ni oxidation barriers on H diffusion in Zr, a Ni-Zr-H potential was developed based on an existing Ni-Zr potential. Using this and existing binary potentials H diffusion characteristics were calculated and some limited findings for the performance of Ni on Zr coatings are made.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Earth radiation pressure effects on satellites

A diffuse-earth radiation force model is presented, which includes a latitudinally varying representation of the shortwave and longwave radiation of the terrestrial sphere. Applications to various earth satellites indicate that this force, in particular the shortwave component, can materially affect the recovery of estimated parameters. Earth radiation pressure cannot explain the anomalous deceleration of LAGEOS, but can produce significant along track accelerations on satellites with highly eccentric orbits. Analyses of GEOS-1 tracking data confirm this result.

Knocke, P. C.↗
NASA NTRS1990

Low-frequency angular broadening and diffuse interstellar plasma turbulence

The effect of turbulence in the interplanetary medium (IPM) on measurements of a low-frequency interferometer is discussed. It is concluded that scattering by IPM will limit the effective sensitivity of a low-frequency interferometer to far above its theoretical value. If the limitations imposed by the IPM can be overcome, a low-frequency interferometer could be used to search for turbulence near supernova remnants, which has been hypothesized to play an important role in the acceleration of the cosmic rays.

Spangler, Steven R.↗