Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Emerging applications: Neuromorphic computing and reservoir computing

The emergence of doped hafnium oxide (HfO 2 )-based ferroelectric films has enabled highly scalable and silicon-compatible ferroelectric devices, opening new frontiers in neuromorphic and reservoir computing. Among these, ferroelectric field-effect transistors (FeFETs) are particularly promising due to their analog memory characteristics and unique polarization dynamics. These properties make FeFETs ideal candidates for artificial synapses in neuromorphic architectures, supporting deep neural networks and spiking neural networks based on leaky-integrate-and-fire (LIF) mechanisms. Beyond neuromorphic computing, FeFETs also play a crucial role in physical reservoir computing, leveraging their intrinsic nonlinear and history-dependent behavior for efficient real-time learning. This approach offers significant advantages for time-series processing and edge artificial intelligence (AI) applications, addressing the growing need for energy-efficient computing. As a result, this article explores the principles, key demonstrations, and future potential of FeFET-based neuromorphic and reservoir computing, highlighting their impact on next-generation AI hardware.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of Microstructural Bands on the Localized Corrosion of Laser Surface-melted 316L Stainless Steel

The localized corrosion of laser surface melted (LSM) 316L stainless steel is investigated by a combination of potentiodynamic anodic polarization in 0.1M HCl and microscopic investigation of the initiation and propagation of localized corrosion. The pitting potential of LSM 316L is significantly lower than the pitting potential of wrought 316L. The LSM microstructure is highly banded as a consequence of the high laser power density and high linear energy density. The bands are composed of zones of changing modes of solidification, cycling between very narrow regions of primary austenite solidification and very wide regions of primary ferrite solidification. Pits initiate in the outer edge of each band where the mode of solidification is primary austenite plane front solidification and primary austenite cellular solidification. The primary austenite regions have low chromium concentration (and possibly low molybdenum concentration), which explains their susceptibility to pitting corrosion. The ferrite is enriched in chromium, which explains the absence of pitting in the primary ferrite regions. The presence of the low chromium regions of primary austenite solidification explains the lower pitting resistance of LSM 316L relative to wrought 316L. The influence of banding on localized corrosion is applicable to other rapidly solidified processes such as additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Final Technical Report for the SciDAC Center for the Study of Plasma Microturbulence

This final technical report for the SciDAC Center for the Study of Plasma Microturbulence documents contributions from MIT to the project over the period of the award (February 15, 2011 to February 14, 2020). This project focused on the development of neoclassical and gyrokinetic simulation capabilities relevant for the description of particle, momentum and energy transport in tokamak fusion plasmas. Extensive validation against experimental results from Alcator C-Mod and DIII-D experiments was performed. Overall areas of emphasis included gyrokinetic simulations, experiments, and observation of density gradient driven Trapped Electron Mode (TEM) turbulence relevant to burning plasmas; theory and gyrokinetic simulations of the parametric variation of the nonlinear upshift of the TEM critical density gradient; identification of a new mechanism for the isotope effect due to density gradient driven TEM turbulence; new synthetic diagnostics based on full-wave simulations which enabled unprecedented agreement between gyrokinetic simulations and measured fluctuation spectra with and without strong electron heating; development of new continuum pedestal neoclassical and turbulence codes; formulation and implementation of the first gyrokinetic exact Fokker-Planck collision operator in gyrokinetic turbulence simulations; development of new spectral approaches in velocity space for highly efficient treatments of collisions; new model collision operators implemented in the discontinuous Galerkin gyrokinetic edge turbulence code GKEYLL; and a new model and spectral code to study the interaction of ion- and electron-scale turbulence, which will serve as an efficient test-bed for multi-rate and multi-scale methods. These fundamental advances contribute to the development of a validated, predictive capability for turbulent and collisional particle, momentum and energy transport in both the core and edge of magnetically confined fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Giant energy-storage density with ultrahigh efficiency in lead-free relaxors via high-entropy design

Next-generation advanced high/pulsed power capacitors rely heavily on dielectric ceramics with high energy storage performance. However, thus far, the huge challenge of realizing ultrahigh recoverable energy storage density (W rec ) accompanied by ultrahigh efficiency (η) still existed and has become a key bottleneck restricting the development of dielectric materials in cutting-edge energy storage applications. Here, we propose a high-entropy strategy to design “local polymorphic distortion” including rhombohedral-orthorhombic-tetragonal-cubic multiphase nanoclusters and random oxygen octahedral tilt, resulting in ultrasmall polar nanoregions, an enhanced breakdown electric field, and delayed polarization saturation. A giant W rec ~10.06 Jcm –3 is realized in lead-free relaxor ferroelectrics, especially with an ultrahigh η ~90.8%, showing breakthrough progress in the comprehensive energy storage performance for lead-free bulk ceramics. This work opens up an effective avenue to design dielectric materials with ultrahigh comprehensive energy storage performance to meet the demanding requirements of advanced energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Spatial control of perilacunar canalicular remodeling during lactation

Abstract Osteocytes locally remodel their surrounding tissue through perilacunar canalicular remodeling (PLR). During lactation, osteocytes remove minerals to satisfy the metabolic demand, resulting in increased lacunar volume, quantifiable with synchrotron X-ray radiation micro-tomography (SRµCT). Although the effects of lactation on PLR are well-studied, it remains unclear whether PLR occurs uniformly throughout the bone and what mechanisms prevent PLR from undermining bone quality. We used SRµCT imaging to conduct an in-depth spatial analysis of the impact of lactation and osteocyte-intrinsic MMP13 deletion on PLR in murine bone. We found larger lacunae undergoing PLR are located near canals in the mid-cortex or endosteum. We show lactation-induced hypomineralization occurs 14 µm away from lacunar edges, past a hypermineralized barrier. Our findings reveal that osteocyte-intrinsic MMP13 is crucial for lactation-induced PLR near lacunae in the mid-cortex but not for whole-bone resorption. This research highlights the spatial control of PLR on mineral distribution during lactation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Inverse metal-assisted chemical etching of germanium with gold and hydrogen peroxide

Abstract Metal-assisted chemical etching (MACE) is a flexible technique for texturing the surface of semiconductors. In this work, we study the spatial variation of the etch profile, the effect of angular orientation relative to the crystallographic planes, and the effect of doping type. We employ gold in direct contact with germanium as the metal catalyst, and dilute hydrogen peroxide solution as the chemical etchant. With this catalyst-etchant combination, we observe inverse-MACE, where the area directly under gold is not etched, but the neighboring, exposed germanium experiences enhanced etching. This enhancement in etching decays exponentially with the lateral distance from the gold structure. An empirical formula for the gold-enhanced etching depth as a function of lateral distance from the edge of the gold film is extracted from the experimentally measured etch profiles. The lateral range of enhanced etching is approximately 10–20 μ m and is independent of etchant concentration. At length scales beyond a few microns, the etching enhancement is independent of the orientation with respect to the germanium crystallographic planes. The etch rate as a function of etchant concentration follows a power law with exponent smaller than 1. The observed etch rates and profiles are independent of whether the germanium substrate is n-type, p-type, or nearly intrinsic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Federated Deep Reinforcement Learning for Decentralized VVO of BTM DERs

The future of grid control requires a hybrid approach combining centralized and decentralized methods to fully utilize the potential of smart edge devices with artificial intelligence (AI) capabilities. This paper aims to develop and evaluate a federated deep reinforcement learning (FDRL) framework for decentralized adaptive volt-var optimization (VVO) of behind-the-meter (BTM) distributed energy resources (DERs). First, this paper models a single deep reinforcement learning (DRL) agent using the Markov Decision Process (MDP) framework for decentralized adaptive VVO of BTM DERs. Two DRL algorithms, soft actor-critic (SAC) and twin-delayed deep deterministic policy gradient (TD3), are compared for their effectiveness in optimizing VVO. Results show that TD3 outperforms SAC, achieving a 71.3% improvement in mean reward. Finally, the DRL agent is deployed within the FDRL framework, using the Flower platform, to enhance learning, provide adaptive control, and ensure data privacy for BTM DERs.

Ravi, Abhijith↗
DOE OSTI2024

Portable Soft X-Ray Diagnostics for Transformative Fusion-Energy Concepts (Final Scientific/Technical Report)

A time-gated extreme-ultraviolet spectrometer was fielded on a transformative fusion-energy device, FuZE-Q at Zap Energy, Inc. (ZEI), a sheared-flow-stabilized z-pinch. Plasma emission spectra were collected in the 5–40 nm wavelength (30–250 eV) range. This was the first time a direct-vacuum-coupled, high-voltage, deposition-sensitive diagnostic was fielded on this type of dense-plasma fusion device. To overcome the special challenges of such a coupling, a unique, highly effective implementation was developed, with fast (10-ns risetime) pulsed high-voltage electronics and a multi-stage differential pumping system. This enabled the UNR spectrometer to collect three independently timed spectra per FuZE-Q shot while also protecting sensitive internal components. Analysis of line emission identified oxygen (N-, C-, B-, Be-, Li-, and He-like O), peaking in intensity shortly after maximum current (>500 kA). Spectral databases and collisional-radiative modeling have been used to identify impurities and estimate edge-plasma temperatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Direction-optimizing Label Propagation and its Application for Community Detection

Label Propagation is a machine learning algorithm typically used for classification. It has also been found to be an effective method for detecting communities in networks. It has two attractive features as a community detection method: it has nearly linear runtime and it requires no \textit{a priori} community information. We propose a new Direction Optimizing Label Propagation Algorithm (DOLPA) that relies on the use of {\em frontiers} and alternates between label {\em push} and label {\em pull} operations to enhance the performance of LPA. Specifically, DOLPA has parameters for tuning the processing order of vertices in a graph. This reduces the number of edges visited and improves the quality of solution. We apply DOLPA to community detection and present the design and implementation of the algorithm as well as its shared-memory parallelization using OpenMP. Empirically, we evaluate our algorithm using synthetic graphs as well as real-world networks. Compared with the state-of-art \textit{Parallel Label Propagation} algorithm, we achieve at least two times the F-Score while reducing the runtime by 50\% for synthetic graphs with overlapping communities. We also compare DOLPA against the state-of-art parallel implementation of the Louvain method using the same graphs and show that DOLPA achieves about three times the F-Score at 10\% the runtime. On real-world graphs, we get a speedup of up to $10\times$ using 64 threads.

Liu, X↗
DOE OSTI2020

Surface Effects on Pyrene Luminescence Excitation

Pyrene is a polycyclic aromatic hydrocarbon with fluorescence in the 370-400 nm range. The optical properties of pyrene deposited on different substrates were investigated from experimental and theoretical points of view. In contrast to prior studies of surface-enhanced fluorescence, in this work all substrates were semiconductors or insulators. Experimentally, the intensity of photoluminescence (PL) and PL excitation (PLE) spectra were investigated. PLE spectra of pyrene’s monomer emission show that the intensities of the two main absorption peaks vary according to the chosen substrate. Here, calculations for pyrene on zinc sulfide (ZnS) and surface-oxidized diamond suggest that this connection arises from the alignment of the pyrene electronic levels relative to the band edges of the substrate. The absorption peak at 272 nm (4.56 eV) is shown to depend on the HOMO-1→LUMO orbital contribution while the 335 nm (3.70 eV) peak depends upon the HOMO→LUMO transition. When the HOMO-1 level falls inside the substrate valence band, as in the case of ZnS, there is significant hybridization of the molecular state with surface states that causes an enhancement of the 272 nm peak. For pyrene on diamond, however, the HOMO-1 level falls in the substrate bandgap, leading to negligible hybridization and thus no enhancement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effects of Photovoltaic Module Materials and Design on Module Deformation Under Load

Quasi-static structural finite-element models of an aluminum-framed crystalline silicon photovoltaic module and a glass-glass thin-film module were constructed and validated against experimental measurements of deflection under uniform pressure loading. Specific practices in the computational representation of module assembly were identified as influential to matching experimental deflection observations. Additionally, parametric analyses using Latin hypercube sampling were performed to propagate input uncertainties related to module materials, dimensions, and tolerances into uncertainties in simulated deflection. Sensitivity analyses were performed on the uncertainty quantification datasets using linear correlation coefficients and variance-based sensitivity indices to elucidate key parameters influencing module deformation. Results identified edge tape and adhesive material properties as being strongly correlated to module deflection, suggesting that optimization of these materials could yield module stiffness gains at par with the conventionally structural parameters, such as glass thickness. This exercise verifies the applicability of finite-element models for accurately predicting mechanical behavior of solar modules and demonstrates a workflow for model-based parametric uncertainty quantification and sensitivity analysis. Finally, applications of this capability include the assessment of field environment loads, derivation of representative loading conditions for reduced-scale testing, and module design optimization, among others.

42 ENGINEERING↗
DOE OSTI2026

Site specific porosity-thermal performance correlations in neutron irradiated U-10Zr fuel

In this work, we present a site-specific three-dimensional analysis of porosity evolution in neutron-irradiated U–10Zr metallic fuel using high-resolution synchrotron X-ray tomography. Focused ion beam cubic lift-outs from four radial positions—fuel center, middle, edge, and fuel-cladding interaction (FCCI) zones—were imaged, reconstructed, and segmented to quantify pore volume, density, morphology, and pore connectivity. Porosity increased modestly from 5.5% at the center to 10.5% at the edge, yet pore number density increased by over two orders of magnitude in the fuel portion near the FCCI interface (from 4.8 x 10 4 to 6.0 x 10 6 pores/mm 3 ). Morphological classification revealed a progression from small spherical pores at the center to equiaxed and tortuous networks at the periphery, with enhanced orientation along the radial direction. Connectivity and permeability analysis reveal that the FCCI region maintains dense, highly interconnected pores despite a moderate volume fraction, enabling rapid fission gas transport and lanthanide migration. Effective thermal conductivity models incorporating sodium logging confirm that these site-specific pore features critically influenced heat transport during reactor irradiation. These findings demonstrate that pore topology—not just porosity fraction—controls thermal performance and thermal pathways in U–10Zr fuels, impacting fuel thermal performance in a reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Operando X-ray Absorption Spectroscopy Study of SnO 2 Nanoparticles for Electrochemical Reduction of CO 2 to Formate

Tin–based electrocatalysts exhibit a remarkable ability to catalyze CO 2 to formate selectively. Understanding the size-property relationships and exploring the evolutions of active size still lack complete understanding. Herein, we prepared SnO 2 nanoparticles (NPs) with controllable size supported on commercial carbon spheres (SnO 2 /C–n, n=1,2,3) by a simple low-temperature annealing method. The transmission electron microscopy(TEM)/scanning transmission electron microscope (STEM) images and fitting results of the small angle X-ray scattering (SAXS) profile confirm the increased size of SnO 2 NPs as the increase of SnO 2 loading. The catalytic performance of SnO 2 has proved the size-dependent effect during CO 2 reduction reaction process. The as-prepared SnO 2 /C–1 displayed the maximum Faradic efficiency of formate (FE HCOO– ) of 82.7% at –1.0 V vs. RHE. In contrast, SnO 2 /C–2 and SnO 2 /C–3 with larger particle sizes achieved lower maximum FE HCOO– and larger overpotential. Moreover, we employed operando XAS to study the evolution of the oxidation state and local coordination environment of SnO 2 under working conditions. In addition to the observed the shifts of rising edge of Sn K-edge X-ray absorption near edge structure (XANES) spectra to lower energy side as the applied voltage decreases, the decreased coordination number of Sn in the Sn-O scattering path and the presence of Sn mental contribution in extended X-ray absorption fine structure (EXAFS) spectra verify the reduction of SnO 2 to SnO x and metallic Sn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Symmetry-resolved CO desorption and oxidation dynamics on O/Ru(0001) probed at the C K-edge by ultrafast X-ray spectroscopy

In this work, we report on carbon monoxide desorption and oxidation induced by 400 nm femtosecond laser excitation on the O/Ru(0001) surface probed by time-resolved X-ray absorption spectroscopy (TR-XAS) at the carbon K-edge. The experiments were performed under constant background pressures of CO (6x10 -8 Torr) and O 2 (3x10 -8 Torr). Under these conditions, we detect two transient CO species with narrow 2π* peaks, suggesting little 2π* interaction with the surface. Based on polarization measurements, we find that these two species have opposing orientations: (1) CO favoring a more perpendicular orientation and (2) CO favoring a more parallel orientation with respect to the surface. We also directly detect gas-phase CO 2 using a mass spectrometer and observe weak signatures of bent adsorbed CO 2 at slightly higher X-ray energies than the 2π* region. These results are compared to previously reported TR-XAS results at the O K-edge where the CO background pressure was three times lower (2x10 -8 Torr) while maintaining the same O 2 pressure. At the lower CO pressure, in the CO 2π* region, we observed adsorbed CO and a distribution of OC-O bond lengths close to the CO oxidation transition state, with little indication of gas-like CO. The shift towards 'gas-like' CO species may be explained by the higher CO exposure, which blocks O adsorption, decreasing O coverage and increasing CO coverage. These effects decrease the CO desorption barrier through dipole-dipole interaction, while simultaneously increasing the CO oxidation barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Network Anomaly Detection in Distributed Edge Computing Infrastructure

As networks continue to grow in complexity and scale, detecting anomalies has become increasingly challenging, particularly in diverse and geographically dispersed environments. Traditional approaches often struggle with managing the computational burden associated with analyzing large-scale network traffic to identify anomalies. This paper introduces a distributed edge computing framework that integrates federated learning with Apache Spark and Kubernetes to address these challenges. We hypothesize that our approach, which enables collaborative model training across distributed nodes, significantly enhances the detection accuracy of network anomalies across different network types. We show that by leveraging distributed computing and containerization technologies, our framework not only improves scalability and fault tolerance but also achieves superior detection performance compared to state-of-the-art methods. Extensive experiments on the UNSW-NB15 and ROAD datasets validate the effectiveness of our approach, demonstrating statistically significant improvements in detection accuracy and training efficiency over baseline models, as confirmed by MannWhitney U and Kolmogorov-Smirnov tests (p<0.05).

Marfo, William [University of Texas at El Paso,Dep↗
DOE OSTI2025

Enabling Real-Time Communication in Multi-Agent Systems: A Graph Neural Network Based Approach

Global connectivity enables effective coordination in Multi-Agent Systems (MAS). Solving these connection problems under hardware constraints is an NP-hard non-Euclidean Degree Constrained Minimum Spanning Tree (DCMST) problem. Prior MAS controllers coordinate team movement for task completion and collision avoidance; some considering Line-of-Sight (LOS) maintenance but prioritizing flexibility over guarantees. Evolutionary Algorithms (EA) have been shown to find good solutions for DCMST, but their performance degrades with larger populations required to support a large MAS. We present a method based on edge graph attention networks, trained offline to reduce online computation times. Empirical comparisons with greedy polynomial-time solvers and EA show that our method leverages latent graph information to consistently find constraint-satisfying solutions in less time.

connectivity maintenance↗
DOE OSTI2020

Time-variable Radio Recombination Line Emission in W49A

We present new Jansky Very Large Array (VLA) images of the central region of the W49A star-forming region at 3.6 cm and at 7 mm at resolutions of 0.″15 (1650 au) and 0.″04 (440 au), respectively. The 3.6 cm data reveal new morphological detail in the ultracompact H ii region population, as well as several previously unknown and unresolved sources. In particular, source A shows elongated, edge-brightened bipolar lobes, indicative of a collimated outflow, and source E is resolved into three spherical components. We also present VLA observations of radio recombination lines at 3.6 cm and 7 mm, and IRAM Northern Extended Millimeter Array (NOEMA) observations at 1.2 mm. Three of the smallest ultracompact H ii regions (sources A, B2, and G2) all show broad kinematic linewidths, with ΔV {sub FWHM} ≳ 40 km s{sup −1}. A multi-line analysis indicates that broad linewidths remain after correcting for pressure broadening effects, suggesting the presence of supersonic flows. Substantial changes in linewidth over the 21 yr time baseline at both 3.6 cm and 7 mm are found for source G2. At 3.6 cm, the linewidth of G2 changed from 31.7 ± 1.8 km s{sup −1} to 55.6 ± 2.7 km s{sup −1}, an increase of +23.9 ± 3.4 km s{sup −1}. The G2 source was previously reported to have shown a 3.6 cm continuum flux density decrease of 40% between 1994 and 2015. This source sits near the center of a very young bipolar outflow whose variability may have produced these changes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Synergy of carbonyl and azo chemistries for wide-temperature-range rechargeable aluminum organic batteries

Rechargeable aluminum organic batteries (RAOBs) are promising for developing cost-effective and sustainable energy storage devices due to the low cost, abundance, and high sustainability of aluminum and organic resources. In this study, we designed and synthesized a redox-active polymer bearing carbonyl and azo groups as a cathode material for RAOBs. The polymeric cathode exhibits a high reversible specific capacity, superior cyclic stability, fast charging capability, and a wide operation temperature range (₋40°C to 100°C). X-ray photoelectron spectroscopy (XPS), pair distribution function (PDF) analysis, and soft X-ray absorption near edge structure (XANES) were employed to gain fundamental insight into the carbonyl and azo chemistries in RAOBs, as well as the cathode electrolyte interphase (CEI) structure. We demonstrated a step-by-step alumination/de-alumination reaction for carbonyl and azo groups in the polymer cathode and unraveled a Al 2 O 3⁻ and AlN-rich CEI, which is critical for the impressive performance of RAOBs.

25 ENERGY STORAGE↗