Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distribution function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Hypervelocity impact effects on solar cells

One of the space hazards of concern is the problem of natural matter and space debris impacting spacecraft. In addition to mechanical damage, impact velocities greater than 5 km/sec can produce shock induced ionization effects with resultant surface charging and complex chemical interactions. The upper limit of the velocity distribution for these particles is on the order of 70 km/sec. The second source of particulate matter is due to the presence of man and the machinery needed to place satellites in orbit. This 'man made' component of the space debris consists of waste, rocket exhaust, and debris caused by satellite break-up. Most of the particles are small. However as the size increases, debris purposefully thrown overboard such as garbage and human waste, combined with paint chips, plastic, wire fragments, bolts, etc., become formidable hazards which completely dominate the distribution function for some orbits. These larger fragments can produce penetration and spalling of the thick metallic structures associated with spacecraft. The particles most often encountered are aluminum oxide, associated with fuel residue, and paint chips. These debris types can have a wide range of particle sizes. It has been stated that the design of spacecraft will have to take the debris evolution into account and provide additional suitable armor for key components in the near future. The purpose of this work was to subject samples from solar power arrays, one of the key components of any spacecraft, to a debris flux typical of what might be found in space, and measure the degradation of the power panels after impact.

Rose, M. Frank↗

The kappa distribution as a variational solution for an infinite plasma

Pangia postulated that the preferred state of a single component infinite plasma is the one that will change the least when perturbed. The plasma distribution of such a state would maximize the plasma wave damping rate, or minimizing gamma where negative gamma is the damping rate. The present study continues from the idea developed by Pangia to determine what distribution function maximizes the damping rate.

Pangia, Michael J.↗

A modular, programmable measurement system for physiological and spaceflight applications

The NASA-Ames Sensors 2000! Program has developed a small, compact, modular, programmable, sensor signal conditioning and measurement system, initially targeted for Life Sciences Spaceflight Programs. The system consists of a twelve-slot, multi-layer, distributed function backplane, a digital microcontroller/memory subsystem, conditioned and isolated power supplies, and six application-specific, physiological signal conditioners. Each signal condition is capable of being programmed for gains, offsets, calibration and operate modes, and, in some cases, selectable outputs and functional modes. Presently, the system has the capability for measuring ECG, EMG, EEG, Temperature, Respiration, Pressure, Force, and Acceleration parameters, in physiological ranges. The measurement system makes heavy use of surface-mount packaging technology, resulting in plug in modules sized 125x55 mm. The complete 12-slot system is contained within a volume of 220x150x70mm. The system's capabilities extend well beyond the specific objectives of NASA programs. Indeed, the potential commercial uses of the technology are virtually limitless. In addition to applications in medical and biomedical sensing, the system might also be used in process control situations, in clinical or research environments, in general instrumentation systems, factory processing, or any other applications where high quality measurements are required.

Hines, John W.↗

Galaxy tracers in N-body simulations

Using the method of smoothed particle hydrodynamics, we have modeled the formation of a compact group of galaxies with sufficient resolution to trace galaxies. Radiative cooling allows the baryons to dissipate their thermal energy and collapse to overdensities characteristic of real galaxies. With their cross section greatly reduced, these galaxy tracers remain distinct during cluster formation while their dark matter halos merge. In addition, the number density, the mass distribution function, and even the morphology of these objects are similar to those of observed galaxies. A viable population of galaxy tracers can be unambiguously defined.

Summers, F. J.↗

Electron cyclotron thruster new modeling results preparation for initial experiments

The following topics are discussed: a whistler-based electron cyclotron resonance heating (ECRH) thruster; cross-field coupling in the helicon approximation; wave propagation; wave structure; plasma density; wave absorption; the electron distribution function; isothermal and adiabatic plasma flow; ECRH thruster modeling; a PIC code model; electron temperature; electron energy; and initial experimental tests. The discussion is presented in vugraph form.

Hooper, E. Bickford↗

Distribution of photons in squeezed polymode light

The distribution functions of photons in squeezed and correlated light for one-mode and multimode cases are obtained based on the method of integrals of motion. Correlation coefficient and squeezing parameter are calculated. The possibility to generate squeezed light using nonstationary Casimir effect is discussed. Quantum parametric Josephson junction is proposed as quantum vacuum generator of electrical vibrations.

Manko, V. I.↗

Microflares observed with UVSP and HXIS

A review of an analysis of SMM (Solar Maximum Mission) microflare observations is presented. The data, from the UVSP (Ultraviolet Spectrometer and Polarimeter) and HXIS (Hard X-ray Imaging Spectrometer) instruments, show that there are counterparts to UV microflares in x-ray emission characteristic of 10(exp 7) K plasma. Implications of the x-ray/UV relationship for flare distribution functions and coronal heating are discussed, and examples of similar events in SMM quiet Sun data are shown.

Porter, Jason G.↗

Nonlinear dynamics of charged particles in the magnetotail

An important region of the earth's magnetosphere is the nightside magnetotail, which is believed to play a significant role in energy storage and release associated with substorms. The magnetotail contains a current sheet which separates regions of oppositely directed magnetic field. Particle motion in the collisionless magnetotail has been a long-standing problem. Recent research from the dynamical point of view has yielded considerable new insights into the fundamental properties of orbits and of particle distribution functions. A new framework of understanding magnetospheric plasma properties is emerging. Some novel predictions based directly on nonlinear dynamics have proved to be robust and in apparent good agreement with observation. The earth's magnetotail may serve as a paradigm, one accessible by in situ observation, of a broad class of boundary regions with embedded current sheets. This article reviews the nonlinear dynamics of charged particles in the magnetotail configuration. The emphasis is on the relationships between the dynamics and physical observables. At the end of the introduction, sections containing basic material are indicated.

Chen, James↗

An axisymmetric magnetohydrodynamic model for the Crab pulsar wind bubble

We extend Kennel and Coroniti's (1984) spherical magnetohydrodynamic models for the Crab Nebula to include the pinching effect of the toroidal magnetic field. Since the bulk nebular flow is likely to be very submagnetosonic, a quasi-static treatment is possible. We show that the pinching effect can be responsible for the observed elongation of the pulsar wind bubble, as indicated by the surface brightness contours of optical synchrotron radiation. From the observed elongation we estimate a value for sigma, the ratio of Poynting flux to plasma kinetic energy flux in the free pulsar wind, which is consistent with previous results from spherical models. Using the inferred magnetic field configuration inside the pulsar wind bubble, combined with the observed dimensions of the X-ray nebula, we are able to constrain the particle distribution function. We conclude that, for a power-law injection function, the maximum energy has to be much larger in the pulsar equatorial region than in the polar region.

Begelman, Mitchell C.↗

Methods of periodicity analysis - Relationship between the Rayleigh analysis and a maximum likelihood method

For periodicity analysis of occurrence rates of discrete events, one can use the maximum likelihood method or the 'Rayleigh analysis'. In a maximum likelihood analysis using a sinusoidal distribution, one tries various values of amplitude A and phase angle Theta(0) of the distribution function. We show that these two methods are essentially equivalent to one another in spite of their different mathematical origins. Using the Rayleigh analysis, therefore, we can simply calculate A and Theta(0) which maximize the likelihood. Using the cumulative nature of the logarithmic likelihood, we can identify time intervals during which the periodicity is in operation. When a periodicity operates only in certain time intervals, it is important to identify these intervals. Mathematically, the above technique is applicable only to discrete events. However, with slight modifications we can apply this technique to general cases - periodicity analysis of measurements of continuously varying quantities.

Bai, T.↗

On the inclination of photospheric solar magnetic fields

We analyze the Kitt Peak magnetograms and find that the distribution function of magnetic field strengths is given by a power law, with an index that depends on the mean absolute magnetic flux. We also find that weak (measured) magnetic fields - but not strong ones - are significantly inclined to the vertical. We argue that this inclination is produced by convective motions at the top of the convection zone.

Murray, Norman↗

Probabilistic structural analysis of space truss structures for nonuniform thermal environmental effects

A three-bay, space, cantilever truss is probabilistically evaluated to quantify the range of uncertainties of vibration frequencies and truss free end vertical displacements due to nonuniform thermal loads, applied loads and moments (mechanical loads), and combination of both. The truss members are assumed to be made from (1) aluminum tubes or (2) high modulus graphite-fiber/intermediate modulus epoxy-matrix composite tubes. Cumulative distribution function results show that certain combination of thermal loads with mechanical loads reduce the probabilistic vibration frequencies and increase the magnitude of the truss free end vertical displacements for the aluminum truss. However, for the composite truss, the thermal effects on the probabilistic vibration frequencies are not as substantial as that for an aluminum truss. This can be attributed to the large differences in the values of coefficient of thermal expansion. Finally, the sensitivities associated with the uncertainties in the structural, material and load variables (primative variables) are investigated. Results indicate that vibration frequencies and truss free end vertical displacements are sensitive to the uncertainties in spacial (geometry) variables as well as member modulus.

Pai, Shantaram S.↗

Quantifying reflectance anisotropy of photosynthetically active radiation in grasslands

Quantifying the vegetative surface's reflectance anisotropy was an important part of the First ISLSCP Field Experiment, as its major objectives focused on retrieval of surface parameters from satellite-derived reflectances. The explicit remote measurements for approximating the bidirectional reflectance distribution function (BRDF) of photosynthetically active radiation had not been previously undertaken. In this paper the proper expression of reflectance for BRDFs for retrieval of canopy parameters is assessed.

Middleton, Elizabeth M.↗

Ballistic transport in planetary ring systems due to particle erosion mechanisms. II - Theoretical models for Saturn's A- and B-ring inner edges

The present numerical simulations and analytic arguments show that many of the common morphological features of the Saturn A- and B-ring inner-edge regions are due to 'ballistic transport', or the net radial transport of mass and angular momentum generated by exchanges of meteoroid impact ejecta. It is suggested that the observed 100-km undulatory structure of the inner B-ring arises from ballistic transport echoing of the inner edge. A strongly prograde ejecta-distribution function is used to fit the edge-region features.

Durisen, Richard H.↗

Chemical-release mission of CRRES

The CRRES satellite was a dual-mission spacecraft to perform active experiments in the Earth's magnetosphere and ionosphere and to study the natural space environment and its effects on spacecraft electronics. The NASA chemical-release mission experiments were motivated by the need to address scientific questions in the areas of coupling between the ionosphere and magnetosphere, response of the magnetosphere system to injections of artificial ion clouds, and instabilities and structuring of the ionosphere in response to perturbations. The initial science results from the chemical-release experiments performed to date are (1) demonstration of critical velocity ionization over a narrow range of parameter space; (2) production of diamagnetic cavities by barium and lithium releases over a wide range of parameters; (3) demonstration of the chemical-release technique to study magnetosphere-ionosphere coupling; (4) modification of energetic electron distribution functions with barium injections; (5) stimulation of magnetospheric waves with barium injections; and (6) possible inducement of enhanced auroral activity.

Reasoner, David L.↗

Infrared image analysis of volcanic thermal features - Lascar Volcano, Chile, 1984-1992

Fifteen Landsat TM images of Lascar volcano (Chile), recorded between December 1984 and April 1992, document the evolution of a lava dome within the summit crater. In every image, the two short-wavelength infrared bands, 5 and 7, have detected thermal radiation from the volcano. As a consequence of the Planck distribution function, the relative response of these two channels depends on the proportions of very hot surfaces occupying tiny pixel areas and broader regions at moderate temperatures. Intercomparison of bands 5 and 7 thereby provides a means for interpreting TM thermal anomalies even in the absence of ground observations. Pronounced changes in the configuration and intensity of the Lascar anomaly suggest that the volcano has experienced at least two cycles of lava dome activity since 1984. The first of these progressed through a 'cooling' period, possibly reflecting a reduced flux of magmatic volatiles at the surface, and culminated in an explosive eruption on September 16, 1986, which appears to have completely destroyed the inferred lava dome.

Oppenheimer, Clive↗

Evidence for ion jets in the high-speed solar wind

Results of an investigation of shapes of proton and alpha particle velocity distribution functions in the high-speed solar wind for the time period from 1973 to 1987 are presented. It is suggested that a modest amount of heating results from the damping of waves, whereas additional heating and the bulk of the acceleration is associated with the direct conversion of magnetic energy flux to plasma convection and enthalpy flux through the process of magnetic reconnection. The present two-component model of heating and acceleration predicts that the ambient flow of plasma from coronal holes is characterized by a low-speed and a low-mass flux. The proton flux is insufficient to drag alpha particles out of the solar gravitational potential well.

Feldman, W. C.↗

Global/local methods for probabilistic structural analysis

A probabilistic global/local method is proposed to reduce the computational requirements of probabilistic structural analysis. A coarser global model is used for most of the computations with a local more refined model used only at key probabilistic conditions. The global model is used to establish the cumulative distribution function (cdf) and the Most Probable Point (MPP). The local model then uses the predicted MPP to adjust the cdf value. The global/local method is used within the advanced mean value probabilistic algorithm. The local model can be more refined with respect to the g1obal model in terms of finer mesh, smaller time step, tighter tolerances, etc. and can be used with linear or nonlinear models. The basis for this approach is described in terms of the correlation between the global and local models which can be estimated from the global and local MPPs. A numerical example is presented using the NESSUS probabilistic structural analysis program with the finite element method used for the structural modeling. The results clearly indicate a significant computer savings with minimal loss in accuracy.

Millwater, H. R.↗