Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

VGOS VLBI Intensives Between MACGO12M and WETTZ13S for the Rapid Determination of UT1-UTC

In this work, we present a status update and preliminary results of the designated research and development VLBI Intensive program VGOS-INT-S, observed between MACGO12M and WETTZ13S for the rapid determination of the Earth’s phase of rotation, expressed via UT1-UTC. Since 2021, 27 Intensive sessions have been observed successfully utilizing a special observation strategy alternating between high- and low-elevation scans for improved determination of delays caused by the neutral atmosphere. Between the end of January and mid of March 2022, VGOS-INT-S was among the most accurate Intensive programs. During this time, eight sessions were observed with an average formal error of 3.1 µs and a bias w.r.t. IERS C04 of 1.1 µs. Later, the session performance decreased due to multiple technical difficulties.

VLBI↗
NASA NTRSDate not supplied

Determination of Interfacial Energy for Solid-State Precipitation

Precipitation of strengthening phases from solid state is a critical process for many materials. For example, the high-temperature creep resistance of Ni-based superalloys is governed by ’ precipitates. However, the interfacial energy which controls the precipitation is expensive to determine experimentally. For simulations, the atomic nature of precipitation events necessitates using Molecular Dynamics (MD) so relying on fitting to a-priori experimental behavior is not required. However, the solid-state precipitation takes orders of magnitude longer time than is accessible for traditional MD simulation. Taking inspiration from Kinetic Monte-Carlo (KMC) methods for simulating diffusion on a rigid lattice, we have developed a hybrid KMC-MD approach to enable simulation of solid-state precipitation (and determination of the interfacial energy). Implementing these methods in LAMMPS, we calculated the interfacial energy for the ’ precipitation out of a super-saturated  phase in Ni-based superalloys. The resulting interfacial energy value for the Ni-Al system is well within the accuracy of experimental values, demonstrating the capability of this method. Enabling the calculation of the interfacial energy without a-priori experimental knowledge of the precipitation unlocks a more efficient ICME-based approach for guiding annealing protocols in Ni-based superalloys and other solid-state precipitation systems.

Precipitation↗
NASA NTRSDate not supplied

Camera Exposure Time Determination for Artemis I Lunar Flyby

During Artemis I, a flight test was conducted using the Optical Navigation Camera to image Lunar terrain at low altitude prior to the Return Powered Flyby (RPF) burn. The vehicle descended rapidly toward the surface and transitioned over the Lunar Terminator during the time frame in which the images were to be gathered, creating challenging lighting conditions which required the development of a novel technique for exposure time determination to gather imagery of appropriate quality for post flight analysis. The resulting technique leveraged simple photometric models and simulations, as well as the spacecrafts altitude and pointing direction to determine the necessary change in exposure times over the course of the flyby, resulting in a successful flight test.

Terrain Relative Navigation↗
NASA NTRSDate not supplied

Using Thermal Desktop to Determine Equivalent Solar Hours on Spacecraft Surfaces

Equivalent solar hours (ESH) are the duration of exposure of a surface to solar radiation, particularly ultraviolet (UV) radiation. Since UV light causes degradation to optical properties of thermal control surfaces, the determination of ESH is important to calculate end of life (EOL) optical properties for spacecraft external surfaces. A higher ESH value generally correlates to greater UV degradation experienced by the surface, resulting in an increase in solar absorptivity. This paper details a novel approach for calculating ESH using Thermal Desktop. Since the ESH value is useful for thermal analysts, this technique is beneficial to quickly perform the analysis internally with tools readily available without relying on external support and funding. The example presented in this paper shows how this method was developed and used for NASA's lunar Gateway spacecraft. This method of analysis is used to calculate ESH for the transit, assembly in orbit, and operational phases for Gateway, utilizing each of the program’s planned configurations throughout its 15-year lifetime. ESH values were calculated using the Monte-Carlo ray tracing capability of Thermal Desktop using both direct solar heating and indirect solar heating due to reflections from other surfaces. The output of this analysis includes an ESH gradient map across the spacecraft. Post-processing of these results enabled identification of the average and maximum ESH on critical surfaces such as radiators. The final ESH values for each surface are then used for determination of EOL optical properties.

Thermal Control↗
NASA NTRSDate not supplied

Camera Exposure Time Determination for Artemis I Lunar Flyby

During Artemis I, a flight test was conducted using the Optical Navigation Camera to image Lunar terrain at low altitude prior to the Return Powered Flyby (RPF) burn. The vehicle descended rapidly toward the surface and transitioned over the Lunar Terminator during the time frame in which the images were to be gathered, creating challenging lighting conditions which required the development of a novel technique for exposure time determination to gather imagery of appropriate quality for post flight analysis. The resulting technique leveraged simple photometric models and simulations, as well as the spacecrafts altitude and pointing direction to determine the necessary change in exposure times over the course of the flyby, resulting in a successful flight test.

Terrain Relative Navigation↗
NASA NTRS2003

Autonomous landmark tracking orbit determination strategy

In this paper, an orbit determination strategy is described that is fully autonomous and relies on a computer-based crater detection and identification algorithm that is suitable for both automation of the ground based navigation system and autonomous spacecraft based navigation.

landmark tracking orbit determination↗
NASA NTRS1998

Determining Fault Insertion Rates for Evolving Software Systems

In developing a software system, we would like to be able to estimate the way in which the fault content changes during its development, as well as determining the locations, having the highest concentration of faults.

faults incremental code enhancements↗
NASA NTRS1996

Single Frequency GPS Orbit Determination for Low Earth Orbiters

A number of missions in the future are planning to use GPS for precision orbit determination. Cost considerations and receiver availability make single frequency GPS receivers attractive if the orbit accuracy requirements can be met.

GPS global positioning satellite GPS/MET orbit det↗
NASA NTRS1993

Automated Precision Orbit Determination for TOPEX/Poseidon with GPS

A highly automated GPS data processing system for the orbit determination of TOPEX/Poseidon is described. The orbit is recovered to an estimated accuracy of better than 4 cm in altitude, 6 cm crosstrack, and 11 cm down track. The RMS postfit residuals on the ionospherically calibrated carrier phase observable are less than 5 mm. The RMS difference over a 4.5-hour overlap period between two 30-hour data arcs is 1 cm in altitude, 5 cm cross track, and 4 cm down track. These results can be obtained within two days of onboard GPS data collection. Most of the data processing for a 30-hour arc of GPS data can be performed on a single workstation in less than 6 hours of CPU time. The estimation scenarios are explained, the automated data processing steps are described, and means to assess solution quality are discussed.

automation GPS data processing orbit determination↗
NASA NTRS1994

Galileo Orbit Determination During the Ida Encounter

As the time of the Ida encounter by Galileo approached, some unfortunate circumstances occurred, causing a very worrisome but exciting encounter, especially with regards to navigation. This paper reports on Galileo's orbit determination stratagy during the period after the last Earth encounter through the Ida flyby. Details in the modeling of Galileo's orbit, and in the use of various navigation tools, will be explained and the results of several key orbit solutions will be given.

Galileo Ida encounter orbit determination navigati↗
NASA NTRS2005

Cassini orbit determination performance during the first eight orbits of the Saturn satellite tour

From June 2004 through July 2005, the Cassini/Huygens spacecraft has executed nine successful close-targeted encounters by three major satellites of the Saturnian system. Current results show that orbit determination has met design requirements for targeting encounters, Hugens descent, and predicting science instrument pointing for targetd satellite encounters. This paper compares actual target dispersion against, the predicte tour covariance analyses.

navigation↗
NASA NTRS2004

Improved DORIS accuracy for precise orbit determination and geodesy

In 2001 and 2002, 3 more DORIS satellites were launched. Since then, all DORIS results have been significantly improved. For precise orbit determination, 20 cm are now available in real-time with DIODE and 1.5 to 2 cm in post-processing. For geodesy, 1 cm precision can now be achieved regularly every week, making now DORIS an active part of a Global Observing System for Geodesy through the IDS.

IDS↗
NASA NTRS2004

Mars Exploration Rover cruise orbit determination

This paper will describe the results of the orbit determination process for each mission, MER-A and MER-B, during their cruise phase to Mars ending with there final approach to Mars atmospheric entry.

navigation↗