Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “construction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

A three-dimensional turbulent compressible subsonic duct flow analysis for use with constructed coordinate systems

An approximate analysis, applicable to nonorthogonal coordinate systems having a curved centerline and planar transverse coordinate surfaces normal to the centerline, is presented for computation of three-dimensional subsonic flow in straight and curved diffusers. The formulation is intended to facilitate the use of constructed coordinates in circumstances where it is difficult to maintain smooth behavior in higher derivatives; the use of local Cartesian variables and fluxes leads to governing equations which require only first derivatives of the coordinate transformation. The analysis is applied to a particular family of duct and diffuser geometries having curved centerlines and superelliptic cross sections. Qualitative agreement with experimental measurements is observed with regard to streamwise vortices and distortion of the primary flow.

Levy, R.↗
NASA NTRS1981

Structural tests on space shuttle thermal protection system constructed with nondensified and densified Li 900 and LI 2200 tile

Structural tests were conducted on thermal protection systems (TPS) LI 900 and LI 2200 tiles and .41 cm and .23 cm thick strain isolation pads. The bond surface of selected tiles was densified to obtain improved strength. Four basic types of experiments were conducted including tension tests, substrate mismatch (initial imperfection) tests, tension loads eccentrically applied, and pressure loads applied rapidly to the tile top surface. A small initial imperfection mismatch (2.29 m spherical radius on the substrate) did not influence significantly the ultimate failure strength. Densification of the tile bond region improved the strength of TPS constructed both of LI 900 tile and of LI 2200 tile. Pressure shock conditions studied did not significantly affect the TPS strength.

Williams, J. G.↗
NASA NTRS1981

Construction assembly and overview

The graphite composite forming and welding technologies for the beam builder concept are discussed. Testing of the prototype truss segment and requirements for orbiter based construction equipment concepts are briefly addressed.

Jenkins, L. M.↗
NASA NTRS1981

A three-dimensional turbulent compressible subsonic duct flow analysis for use with constructed coordinate systems

An approximate analysis is presented which is applicable to nonorthogonal coordinate systems having a curved centerline and planar transverse coordinate surfaces normal to the centerline. The primary flow direction is taken to coincide with the local direction of the duct centerline and is hence normal to transverse coordinate planes. The formulation utilizes vector components (velocity, vorticity, transport equations) defined in terms of local Cartesian directions aligned with the centerline tangent, although the governing equations themselves are expressed in general nonorthogonal coordinates. For curved centerlines, these vector quantities are redefined in new local Cartesian directions at each streamwise location. The use of local Cartesian variables and fluxes leads to governing equations which require only first derivatives of the coordinate transformation, and this provides for the aforementioned ease in using constructed coordinates.

Levy, R.↗
NASA NTRS1980

Aircraft wing weight build-up methodology with modification for materials and construction techniques

An aircraft wing weight estimating method based on a component buildup technique is described. A simplified analytically derived beam model, modified by a regression analysis, is used to estimate the wing box weight, utilizing a data base of 50 actual airplane wing weights. Factors representing materials and methods of construction were derived and incorporated into the basic wing box equations. Weight penalties to the wing box for fuel, engines, landing gear, stores and fold or pivot are also included. Methods for estimating the weight of additional items (secondary structure, control surfaces) have the option of using details available at the design stage (i.e., wing box area, flap area) or default values based on actual aircraft from the data base.

York, P.↗
NASA NTRS1981

The self-consistent calculation of pseudo-molecule energy levels, construction of energy level correlation diagrams and an automated computation system for SCF-X(Alpha)-SW calculations

The self consistent calculation of the electronic energy levels of noble gas pseudomolecules formed when a metal surface is bombarded by noble gas ions is discussed along with the construction of energy level correlation diagrams as a function of interatomic spacing. The self consistent field x alpha scattered wave (SCF-Xalpha-SW) method is utilized. Preliminary results on the Ne-Mg system are given. An interactive x alpha programming system, implemented on the LeRC IBM 370 computer, is described in detail. This automated system makes use of special PROCDEFS (procedure definitions) to minimize the data to be entered manually at a remote terminal. Listings of the special PROCDEFS and of typical input data are given.

Schlosser, H.↗
NASA NTRS1980

Analytic construction of periodic orbits about the collinear points

A third-order analytical solution for halo-type periodic motion about the collinear points of the circular-restricted problem is presented. The three-dimensional equations of motion are obtained by a Lagrangian formulation. The solution is constructed using the method of successive approximations in conjunction with a technique similar to the Lindstedt-Poincare method. The theory is applied to the sun-earth system.

Richardson, D. L.↗
NASA NTRS1981

Space operations center construction, flight support, and satellite servicing

The Space Operations Center will have 3 primary missions: (1) construction of large satellites and platforms, (2) flight support of orbital transfer vehicles, including manned and unmanned vehicles, and (3) satellite servicing, including tending of attached payload modules, spacecraft stationkeeping with the SOC, and remotely located satellites. This paper describes some of the facilities, equipment, and operations involved in conducting these missions. The data described in this paper are from an on-going system analysis study and therefore should not be considered as final.

Miller, K. H.↗
NASA NTRS1980

Materials of construction for silicon crystal growth

The performance of materials for construction and in contact with molten silicon for crystal growth is presented. The basis for selection considers physical compatibility, such as thermal expansion and strength, as well as chemical compatibility as indicated by contamination of the silicon. A number of new high technology materials are included as well as data on those previously used. Emphasis is placed on the sources and processing of such materials in that results are frequently dependent on the way a material is prepared as well as its intrinsic constituents.

Leipold, M. H.↗
NASA NTRS1981

Construction of composite three dimensional grids from subregion grids generated by elliptic systems

A technique is presented for constructing a boundary-conforming grid throughout a general three-dimensional flow region as a composite of subregion grids. Each subregion grid is generated numerically by solving a nonlinear system of elliptic equations. The boundary values represent nodal points in a quasi-two-dimensional grid that covers the curved surface bounding the subregion, and are generated numerically by a modified elliptic system. A primary feature of the technique is that the composite three-dimensional grid remains both continuous and smooth across the surface of juncture between any two adjoining subregions. Sample results are given for a wing-body combination.

Thomas, P. D.↗
NASA NTRS1982

Attitude control of the space construction base: A modular approach

A planar model of a space base and one module is considered. For this simplified system, a feedback controller which is compatible with the modular construction method is described. The systems dynamics are decomposed into two parts corresponding to base and module. The information structure of the problem is non-classical in that not all system information is supplied to each controller. The base controller is designed to accommodate structural changes that occur as the module is added and the module controller is designed to regulate its own states and follow commands from the base. Overall stability of the system is checked by Liapunov analysis and controller effectiveness is verified by computer simulation.

Oconnor, D. A.↗
NASA NTRS1982

Orbiter based construction equipment

Many orbiter based activities need equipment to hold a payload steady while it is being worked on. This work may be construction, updating, repair, services, check out, or refueling operations in preparation for return to Earth. The Handling and Positioning Aid (HPA) is intended for use as general purpose equipment. The HPA provides a wide choice of work station positions, both immediately above the orbiter cargo bay and beyond. It can act in a primary docking role and, if required, can assist actively in the berthing process. From an analysis of ten reference missions, it was determined that two types of HPA mobility are needed; a tilt table, which simply swings out of the cargo bay, pivoting about an athwartships y axis, and an articulated arm. Illustration of the aid are provided.

Goodwin, C. J.↗
NASA NTRS1980

Specific SPS construction studies: Operations and maintenance

Surface as well as in-space operations of the solar power satellite program are addressed. The primary end products of SPS industrial enterprise are shown SPS and its ground receiving antenna every six months; and (3) construction of electric cargo orbital transfer vehicles. The production of photovoltaic cells and solar blankets is also considered.

Miller, K. H.↗
NASA NTRS1982

Space Construction Experiment Definition Study (SCEDS), part 2. Volume 2: Study results

The Space Construction Experiment (SCE) was defined for integration into the Space Shuttle. This included development of flight assignment data, revision and update of preliminary mission timelines and test plans, analysis of flight safety issues, and definition of ground operations scenarios. New requirements for the flight experiment and changes for a large space antenna feed mask test article were incorporated. The program plan and cost estimates were updated. Revised SCE structural dynamics characteristics were provided for simulation and analysis of experimental tests to define and verify control limits and interactions effects between the SCE and the Orbiter digital automatic pilot.

Source record↗
NASA NTRS1982

The metallurgical structure and mechanical properties at low temperature of Nitronic 40 with particular reference to its use in the construction of models for cryogenic wind tunnels

Nitronic 40 was chosen for the construction of Pathfinder I, an R & D model for use in the National Transonic Facility, because of its good mechanical properties at cryogenic temperatures. Nitronic 40 contains delta ferrite and is in a sensitized condition. Heat treatments carried out to remove residual stresses also caused further sensitization. Experiments showed that heat treatment followed by cryoquenching removed the sensitization without creating residual stresses. Heat treatment at temperatures of 2200 F was used to remove the delta ferrite but with little success and at the cost of massive grain growth. The implications of using degraded Nitronic 40 for cryogenic wind tunnel models are discussed, together with possible acceptance criteria.

Wigley, D. A.↗
NASA NTRS1982

Space environmental effects: Construction and utilization of a system to measure low thermal strain in one meter graphite epoxy tubes

A system for measuring the expansion of low coefficient of thermal expansion (CTE) materials was constructed around a H.P. 5526-A laser measuring system. The vacuum CTE measurements in the -150 F to +120 F range were made over a 6 month period on a graphite epoxy tube yielding CTE values of 2.5 to one fifty-millionth/F above ambient and 2 + or - one ten-millionth F below ambient temperature. To assure that the below ambient, approximately 10 microns high open loop nature of the delta L/L vs. T curves was not apparatus related, similar size quartz tubes (A and B) were checked and found to have only a 2 micron (negligable for quartz) open loop component. These two quartz tubes, A and B, had ambient CTE values 20% and 45% respectively higher than the average handbook value. The overnight microcreep diminished an order of magnitude during the first several cycles after the system had been reopened.

Davis, J. H.↗
NASA NTRS1982

Construction of solutions for some nonlinear two-point boundary value problems

Constructive existence and uniqueness results for boundary value problems associated with some simple special cases of the second order equation y'' = f(x,y,y') 0 or = x or = 1, are sought. The approach considered is to convert the differential equation and boundary conditions to an integral equation via Green's functions, and then to apply fixed point and contraction map principles to a sequence of successive approximations. The approach is tested on several applied problems. Difficulties in trying to prove general theorems are discussed.

Pennline, J. A.↗