Baseline data studies on germfree, associated and conventional Charles River CD (Registered)-1 mice
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Preliminary Apollo 14 (Mission H-3) trajectory data for the July 1970 launch window are presented in this document. A general mission profile is presented, and approximate variations of selected mission parameters are indicated. Note that the information in this document is preliminary and will be updated in the Apollo 14 (Mission H-3) operational trajectory documents.
The characteristics of the Michelson/Pease stellar interferometer are discussed. An analog of the interferometer using radio waves is described. The use of a conventional hard-wired interferometer with very long base line interferometry (VLBI) is analyzed. Mathematical models are developed to analyze the VLBI techniques. A summary of VLBI geodetic experiments is tabulated. The concept and application of the astronomical radio interferometric earth surveys (ARIES) are reported. A schematic diagram of ARIES implementation is provided.
A wind tunnel force and moment test of the space shuttle launch vehicle was conducted. The wind tunnel model utilized a triple balance such that component aerodynamics of the orbiter, external tank, and solid rocket booster was obtained. The test was conducted at an angle of attack range from -10 deg to 10 deg, and angle of sideslip range from -10 deg to 10 deg, and a Mach number range from 0.6 to 4.96. Simulation parameters to be used in future launch vehicle wind tunnel tests were investigated. The following were included: (1) effect of orbiter -ET attach hardware; (2) model attachment (spacer) effects; (3) effects of grit on model leading surfaces; and (4) model misalignment effects. The effects of external tank nose shape was studied by investigating five different nose configurations. Plotted and tabulated data is reported.
Data were obtained for Mach numbers from 0.6 to 3.48, angles of attack from -10 to 10 degrees, and angles of sideslip from -10 to 10 degrees at zero angle of attack. Also, -4 and 4 degrees sideslip were run for an angle of attack of -5 and 5 degrees. Aerodynamic configurations of the solid rocket motors, external tank, and orbiter are shown. Graphs of plotted pressure data (pressure coefficients) for the external tank and solid rocket motors are given. A description of the test facility is included.
Meteorological soundings representative of the atmospheric environment at the Kennedy Space Center, Florida and Vandenberg Air Force Base, California, are presented. Synthetic meteorological soundings at Kennedy Space Center, including fall, spring, and a sea breeze, and at Vandenberg Air Force Base (sea breeze with low and high level inversion and stationary upper level troughs) are shown. Soundings of frontal passages are listed. The Titan launch soundings at Kennedy Space Center present a wide range of meteorological conditions, both seasonal and time of day variations. The meteorological data input of altitude, wind speed, wind direction, temperature, and pressure may be used as meteorological inputs for the NASA/MSFC Multilayer Diffusion Model or other models to obtain quantitative estimates of effluent concentrations associated with the potential emission of major combustion products in the lower atmosphere to simulate actual launches of space vehicles. The Titan launch soundings are also of value in terms of rocket effluent measurements for analysis purposes.
The advanced supersonic technology configuration, AST-100, is described. The combination of wing thickness reduction, nacelle recontouring for minimum drag at cruise, and the use of the horizontal tail to produce lift during climb and cruise resulted in an increase in maximum lift-to-drag ratio. Lighter engines and lower fuel weight associated with this resizing result in a six percent reduction in takeoff gross weight. The AST-100 takeoff maximum effective perceived noise at the runway centerline and sideline measurement stations was 114.4 decibels. Since 1.5-decibels tradeoff is available from the approach noise, the required engine noise supression is 4.9 decibels. The AST-100 largest maximum overpressure would occur during transonic climb acceleration when the aircraft was at relatively low altitude. Calculated standard +8 C day range of the AST-100, with a 292 passenger payload, is 7348 km (3968 n.mi). Fuel price is the largest contributor to direct operating cost. However, if the AST-100 were flown subsonically (M = 0.9), direct operating costs would increase approximately 50 percent because of time related costs.
A dispersion analysis considering 3 beta uncertainties in platform, vehicle, and environmental parameters is described. Powered explicit guidance used to develop closed loop steering commands, the nominal profile, and entry interface conditions are discussed. The groundrules and assumptions for the analysis are reviewed. The results presented include dispersion data at specific time slices from liftoff to entry interface, covariance matrices, summary data, and exchange ratios.
Regional relationships between river hydrology, sediment transport, circulation and coastal processes were analyzed utilizing aircraft, ERTS-1 and N.O.A.A. -2 and -3 imagery and corroborative ground truth data. The use of satellite and aircraft imagery provides a means of acquiring synoptic information for analyzing the dynamic processes of Cook Inlet in a fashion not previously possible.
The Lucas Limousine, an electric vehicle, was tested to assess the state-of-the-art of electric vehicles. All tests were made without the regenerative braking system and were conducted at the gross vehicle weight of 7,700 pounds. Over a 30 mph stop and go driving cycle the vehicle went 48.4 miles. The vehicle was able to accelerate to 30 mph in about 15 seconds with a gradeability limit of 16.5 percent. As determined by coast down tests the road power and road energy consumption for the vehicle were 2.92 kilowatts and 0.146 kWh/mi, respectively, at 20 mph. At 40 mph the road power requirement was 11.12 kilowatts and the road energy requirement was 0.278 kWh/mi. The maximum energy economy measured 0.45 kilowatt hours per mile at 30 mph and increased to 0.76 kilowatt hours per mile at 50 mph. Over the 30 mph stop and go driving cycle the energy economy was 0.92 kilowatt hours per mile.
Five electric vehicles were tested at vehicle test tracks using the SAE. The tests provide range data at steady speeds and for several driving cycles. Most tests were conducted with lead-acid traction batteries. The Otis Van and the Copper Electric Town Car were also tested with lead-acid and nickel-zinc batteries. The tests showed a range increase of from 82 to 101 percent depending on vehicle, speed, and test cycle.
Two electric vehicles from Electric Vehicle Associates were evaluated for ERDA at the Transportation Research Center of Ohio. The vehicles, loaded to a gross vehicle weight of 3750 pounds, had a range of 56.3 miles at a steady speed of 25 mph and a 27.4 miles range during acceleration-deceleration tests to a top speed of 30 mph. Energy consumption varied from 0.48 kw-hr/mi. to 0.59 kw-hr/mi.
Results of extended VLBI observations at two epochs 15 months apart are compared for several sources suspected of showing decimetric flux variations. No evidence is obtained for changes in fringe amplitudes greater than 5%.
Explore the source record for details and available documents.