Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wave Power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Modification of the collective Thomson scattering radiometer in the search for parametric decay on TEXTOR

Strong scattering of high-power millimeter waves at 140 GHz has been shown to take place in heating and current-drive experiments at TEXTOR when a tearing mode is present in the plasma. The scattering signal is at present supposed to be generated by the parametric decay instability. Here we describe the heterodyne detection system used to characterize the newly discovered signal measured at TEXTOR, and we present spectral shapes in which the signal can appear under different conditions. The radiation is collected by the receiver through a quasi-optical transmission line that is independent of the electron cyclotron resonance heating transmission line, and so the scattering geometry is variable. The signal is detected with 42 frequency channels ranging from 136 to 142 GHz. We demonstrate that the large signal does not originate from gyrotron spurious radiation. The measured signal agrees well with independent backscattering radiometer data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Electro-optically responsive composites of gold nanospheres in 5CB liquid crystal under direct current and alternating current joint action

Direct current (DC) electro-optical (EO) control of transmitted laser beam intensity based on EO controlled coherent light scattering and diffraction by stationary longitudinal texture pattern (LTP) is achieved in planar-oriented cells with a composite mixture of polymer-coated gold spherical nanoparticles (Au-NPs) with a mean diameter of about 12 nm and the room-temperature nematic pentylcyanobiphenyl (5CB). At relatively low DC voltage of about 5 V, the effective scattering/diffraction by Au-NPs/5CB composites leads to a spatial spreading of transmitted coherent light from a low-power continuous wave laser beam, resulting in a drastic reduction of its local intensity. The effect is polarization dependent and is strongest when the polarization of the input laser beam is along the LTP. The EO response of Au-NPs/5CB mixtures is studied under DC and alternating current (AC) joint action with the aim of the potential use of these composite materials as EO controlled diffusers. The specific V-shaped sharp dip in the DC voltage-dependent coherent light transmittance of Au-NPs/5CB planar films, as well as the possibility for erasing the scattering/diffractive LTP in the films by joint low AC voltage, can be useful for EO applications in the field of process control and for detection of weak dynamic electric fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Properties of reactive oxygen species by quantum Monte Carlo

The electronic properties of the oxygen molecule, in its singlet and triplet states, and of many small oxygen-containing radicals and anions have important roles in different fields of chemistry, biology, and atmospheric science. Nevertheless, the electronic structure of such species is a challenge for ab initio computational approaches because of the difficulties to correctly describe the statical and dynamical correlation effects in presence of one or more unpaired electrons. Only the highest-level quantum chemical approaches can yield reliable characterizations of their molecular properties, such as binding energies, equilibrium structures, molecular vibrations, charge distribution, and polarizabilities. In this work we use the variational Monte Carlo (VMC) and the lattice regularized Monte Carlo (LRDMC) methods to investigate the equilibrium geometries and molecular properties of oxygen and oxygen reactive species. Quantum Monte Carlo methods are used in combination with the Jastrow Antisymmetrized Geminal Power (JAGP) wave function ansatz, which has been recently shown to effectively describe the statical and dynamical correlation of different molecular systems. In particular, we have studied the oxygen molecule, the superoxide anion, the nitric oxide radical and anion, the hydroxyl and hydroperoxyl radicals and their corresponding anions, and the hydrotrioxyl radical. Overall, the methodology was able to correctly describe the geometrical and electronic properties of these systems, through compact but fully-optimised basis sets and with a computational cost which scales as N{sup 3} − N{sup 4}, where N is the number of electrons. This work is therefore opening the way to the accurate study of the energetics and of the reactivity of large and complex oxygen species by first principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Continuous wave room temperature external ring cavity quantum cascade laser

An external ring cavity quantum cascade laser operating at ∼5.2 μm wavelength in a continuous-wave regime at the temperature of 15 °C is demonstrated. Out-coupled continuous-wave optical powers of up to 23 mW are observed for light of one propagation direction with an estimated total intra-cavity optical power flux in excess of 340 mW. The uni-directional regime characterized by the intensity ratio of more than 60 for the light propagating in the opposite directions was achieved. A single emission peak wavelength tuning range of 90 cm{sup −1} is realized by the incorporation of a diffraction grating into the cavity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Three stage cascade diode lasers generating 500 mW near 3.2 μm

GaSb-based type-I quantum well 3.1–3.2 μm diode lasers with two- and three-cascade heterostructures were designed, fabricated, and characterized. Devices with ∼100-μm-wide aperture, 3-mm-long cavity, and anti-/high-reflection coated mirrors demonstrated continuous wave output power of 500 mW, threshold current density of ∼200 A/cm{sup 2}, and peak power conversion efficiency of ∼7% at 17 °C. This corresponds to more than twofold improvement in terms of output power and efficiency as compared to standard diode lasers operating in the same spectral region. The experiment showed that the increase in the number of cascades from two to three led to critical enhancement of the differential gain and reduction of the threshold current density. Light p-doping of the AlGaAsSb graded section did not introduce extra optical loss but aided hole transport as required for realization of the efficient multi-stage cascade pumping scheme.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Preface to Special Topic: Marine Renewable Energy

Marine renewable energy (MRE) is generates from waves, currents, tides, and thermal resources in the ocean. MRE has been identified as a potential commercial-scale source of renewable energy. This special topic presents a compilation of works selected from the 3rd IAHR Europe Congress, held in Porto, Portugal, in 2014. Here, it covers different subjects relevant to MRE, including resource assessment, marine energy sector policies, energy source comparisons based on levelized cost, proof-of-concept and new-technology development for wave and tidal energy exploitation, and assessment of possible inference between wave energy converters (WEC).

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Modeling the spectral modification of lower hybrid wave in the presence of drift-wave type density fluctuation in the scrape-off-layer of the EAST tokamak

In this work, the spectrum change of the lower hybrid (LH) waves caused by a low-frequency density fluctuation in the scrape-off-layer is studied by applying the wave scattering model developed by Bonoli and Ott [Phys. Fluids 25, 359 (1982)] via a Monte Carlo method. A ray-tracing model specific to this purpose is developed to evaluate the probability distribution of both the poloidal refractive index (N θ ) and the parallel refractive index (N ∥ ) of the LH wave at the last closed flux surface (LCFS).The probability distributions of N ∥ and N θ at the LCFS are studied using the EAST parameters as a function of wave frequency, the initial N ∥ , and the polar injection position, which may influence the lower hybrid current drive efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Quasioptical modeling of wave beams with and without mode conversion. IV. Numerical simulations of waves in dissipative media

We report the first quasi-optical simulations of wave beams in a hot plasma using the quasi-optical code PARADE (PAraxial RAy DEscription) [K. Yanagihara, I. Y. Dodin, and S. Kubo, Phys. Plasmas 26, 072112 (2019)]. This code is unique in that it accounts for inhomogeneity of the dissipation-rate across the beam and mode conversion simultaneously. We show that the dissipation-rate inhomogeneity shifts beams relative to their trajectories in cold plasma and that the two electromagnetic modes are coupled via this process, an effect that was ignored in the past. Additionally, we propose a simplified approach to account for the dissipation-rate inhomogeneity. This approach is computationally inexpensive and simplifies the analysis of actual experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The rapid destruction of toroidal magnetic surfaces

The operation of ITER will require reliable simulations in order to avoid major damage to the device from disruptions. Disruptions are the sudden breakup of magnetic surfaces across the plasma volume—a fast magnetic reconnection. This reconnection can be caused by the growth of perturbations outside of the plasma core causing an ideal perturbation to the core. This causes an increasing ratio of the maximum to the minimum separation, Δmax/Δmin, between neighboring magnetic surfaces. Magnetic reconnection becomes a dominant process when magnetic field lines can quickly interchange connections over a spatial scale ar. This occurs when Δmax/Δmin≳ar/Δd, where Δd is the scale over which non-ideal effects make magnetic field lines indistinguishable. Traditional reconnection theory is fundamentally different. It is a study of the steady-state cancelation of oppositely directed magnetic field components across a thin layer. During more than sixty years, mathematical implications of Faraday's law have been derived that clarify and constrain the physics of fast magnetic reconnection. These are reviewed because they are not commonly known but are needed to understand and to place in context how an ideal magnetic evolution can cause reconnection to quickly become a dominant process no matter how small Δd/ar may be.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Evolution of coupled weakly driven waves in a dissipative plasma

The nonlinear collisional dynamics of coupled driven plasma waves in the presence of background dissipation is studied analytically within kinetic theory. Sufficiently near marginal stability, phase space correlations are poorly preserved and time delays become unimportant. The system is then shown to be governed by two first-order coupled autonomous differential equations of cubic order for the wave amplitudes and two complementary first-order equations for the evolution of their phases. That system of equations can be decoupled and further simplified to a single second-order differential equation of Liénard's type for each amplitude. Numerical solutions for this equation are obtained in the general case, while analytic solutions are obtained for special cases in terms of parameters related to the spacing of the resonances of the two waves in frequency space, e.g., wave lengths and oscillation frequencies. These parameters are further analyzed to find classes of quasi-steady saturation and pulsating scenarios. To classify equilibrium points, local stability analysis is applied, and bifurcation conditions are determined. When the two waves saturate at similar amplitude levels, their combined signal is shown to invariably exhibit amplitude beating and phase jumps of nearly π. In conclusion, the obtained analytical results can be used to benchmark simulations and to interpret eigenmode amplitude measurements in fusion experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Validity condition for the local sheath impedance boundary condition and a nonlocal generalization

ICRF sheaths can cause unwanted interactions of high-power RF waves with material surfaces in magnetic fusion devices. In previous work, a local RF sheath impedance boundary condition (BC) was derived for use in ICRF codes together with a microscale (i.e., Debye or sheath width scale) model for obtaining the sheath impedance used in that BC. This local RF sheath BC matches the normal component of current and electrostatic potential across the sheath-plasma interface. Collapsing the matching conditions at the sheath-plasma interface to a BC depends on the assumption of scale separation, which can be violated when conditions along the local radius of curvature of the surface vary sufficiently rapidly. The validity condition is explored in this contribution, with special attention to the case where the magnetic field approaches being tangent to the surface. When the local sheath BC no longer applies, a non-local sheath BC is developed under the assumption of a more relaxed scale separation assumption. It is shown that the non-local sheath BC reduces to the previous local sheath BC under appropriate conditions. Furthermore, a surface-integrated sheath admittance parameter describes the 2D physics in the new BC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Full-wave simulations on helicon and parasitic excitation of slow waves near the edge plasma

Helicon waves are thought to be promising in various tokamaks, such as DIII-D, because they can penetrate reactor-grade high-density cores and drive the off-axis current with higher efficiency. In the frequency regime ~476 MHz, both slow electrostatic and fast electromagnetic helicon waves can coexist in DIII-D. If the antenna parasitically excites the slow mode, these waves can propagate along the magnetic field line into the scrape-off layer (SOL). Although the importance of the misalignment of the Faraday screen and the electron density in the SOL on the excitation and propagation of slow modes is well known, the conditions for minimizing slow mode excitation have yet to be optimized. Using the Petra-M simulation code in the 2D domain, we analyze the effects of the misalignment of the antenna in the poloidal direction, the misalignment of the Faraday screen in the toroidal direction, and the density in front of the antenna on slow mode generation. Our results suggest that the misalignment of the Faraday screen is a critical factor in reducing the slow mode and that the misalignment angle should be below ~5° to minimize the slow wave excitation. When the electron density is higher than 3.5 x 10 18 m –3 in the SOL, the generation of the slow mode from the antenna is minimized and unaffected by the misalignment of the Faraday screen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Anomalous resistivity and electron heating by lower hybrid drift waves inside reconnecting current sheets

Inside an electron diffusion region of laboratory reconnection experiments, the quasi-electrostatic lower hybrid drift wave (ES-LHDW) is observed when a significant guide field component is present. Through direct measurement of the anomalous drag term and quasilinear analysis, it is shown that ES-LHDW can account for approximately 20% of the mean reconnection electric field in a case with moderate guide field. This value exceeds the contribution from classical resistivity, which is around 10%. The effects of the Lorentz force term, often neglected for electrostatic waves, are crucial for the observed correlation between electric field and density fluctuations. Anomalous electron heating by the perturbed current and resistivity (2.6 MW/m 3 ) also surpasses the classical Ohmic heating, which is about 2.0 MW/m 3 . For the case with a high guide field, significantly higher local electron temperatures were observed during periods of strong ES-LHDW activity. A statistical analysis further supports electron heating by LHDW, showing a larger increase in electron temperature with a high guide field. Finally, data from the Magnetospheric Multiscale mission provide evidence of Landau damping of ES-LHDW, suggesting that ES-LHDW may contribute to the generation of nonthermal electrons along the direction parallel to the magnetic field.

Magnetic reconnection↗
DOE OSTI2014

Anchor selection study for ocean current turbines

This paper compares anchoring systems suitable for ocean current turbines, specifically those proposed to be installed off the coast of Southeast Florida near latitude 26° 5’ N. This location boasts one of the most energy dense ocean current resources, with a mean kinetic energy flux of approximately 2.34 kW/m2. Seafloor types ranging from unconstrained sediment to high relief ledges were observed during regional benthic surveys for which applicable anchor types would include deadweight, plate, pile, and drag embedment. Numerical simulations of single point moored marine hydrokinetic devices were used to extract anchor loading at a likely deployment location for mooring scopes from 1.25 to 2.0 and turbine rotor diameters between 3–50m. These anchor loading data were used for preliminary sizing of deadweight and driven plate anchors on both cohesionless and cohesive soils. Finally, the capabilities of drag embedment and pile anchors relevant to ocean current turbines are discussed. Multiple types of drag embedment anchors can support all of the predicted loads if adequate sediment exists and the loading is horizontal, while pile and H-type anchors can support all of the evaluated loading scenarios and chain-in-hole anchors can support turbines with rotor diameters up to 30m.

Florida Current↗
DOE OSTI2014

NEAR-IR STUDIES OF RECURRENT NOVA V745 SCORPII DURING ITS 2014 OUTBURST

The recurrent nova V745 Scorpii underwent its third known outburst on 2014 February 6. Infrared monitoring of the eruption on an almost daily basis, starting from 1.3 days after discovery, shows the emergence of a powerful blast wave generated by the high velocity nova ejecta exceeding 4000 km s{sup –1} plowing into its surrounding environment. The temperature of the shocked gas is raised to a high value exceeding 10{sup 8} K immediately after outburst commencement. The energetics of the outburst clearly surpass those of similar symbiotic systems like RS Oph and V407 Cyg which have giant secondaries. The shock does not show a free-expansion stage but rather shows a decelerative Sedov-Taylor phase from the beginning. Such strong shock fronts are known to be sites for γ-ray generation. V745 Sco is the latest nova, apart from five other known novae, to show γ-ray emission. It may be an important testbed to resolve the crucial question of whether or not all novae are generically γ-ray emitters by virtue of having a circumbinary reservoir of material that is shocked by the ejecta rather than γ-ray generation being restricted to only symbiotic systems with a shocked red giant (RG) wind. The lack of a free-expansion stage favors V745 Sco to have a density enhancement around the white dwarf (WD), above that contributed by a RG wind. Our analysis also suggests that the WD in V745 Sco is very massive and a potential progenitor for a future SN Ia explosion.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Transient Relativistic Plasma Grating to Tailor High-Power Laser Fields, Wakefield Plasma Waves, and Electron Injection

In this work, we show the first experiment of a transverse laser interference for electron injection into the laser plasma accelerators. Simulations show such an injection is different from previous methods, as electrons are trapped into later acceleration buckets other than the leading ones. With optimal plasma tapering, the dephasing limit of such unprecedented electron beams could be potentially increased by an order of magnitude. In simulations, the interference drives a relativistic plasma grating, which triggers the splitting of relativistic-intensity laser pulses and wakefield. Consequently, spatially dual electron beams are accelerated, as also confirmed by the experiment.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Pulse-by-pulse transient thermal deformation in crystal optics under high-repetition-rate FEL

Time-domain modeling of the thermal deformation of crystal optics can help define acceptable operational ranges across the pulse-energy repetition-rate phase space. In this paper, we have studied the transient thermal deformation of a water-cooled diamond crystal for a cavity-based X-ray free-electron laser (CBXFEL), either an X-ray free-electron laser oscillator (XFELO) or a regenerative amplifier X-ray free-electron laser (RAFEL), by numerical simulations including finite-element analysis and advanced data processing. Pulse-by-pulse transient thermal deformation of a 50 µm-thick diamond crystal has been performed with X-ray pulse repetition rates between 50 kHz and 1 MHz. Results for temperature and thermal deformation have been compared with the results of transient analysis using a continuous wave (CW) power loading. Temperature and thermal deformation results from pulse-by-pulse transient analysis vary with time about the results for the CW case for the same average power. The variation amplitude increases with pulse energy and decreases with repetition rate. When the repetition rate increases to infinity, both temperature and thermal deformation converge to the results for the CW case. Two critical time scales for the operation of crystal optics in a CBXFEL are (1) first-turn time, i.e. the time for the XFEL pulse to complete the first turn around the cavity so that the crystal sees the recirculated XFEL pulse, and (2) period-end time, i.e. the time that the next electron bunch arrives for the amplification, so that the crystal outcouples the amplified FEL power. For the same average power, simulation results show that the crystal thermal deformation seen by the XFEL beam decreases with repetition rate at the first-turn time of a 300 m-long cavity and increases with repetition rate at the period-end time. For the wavefront preservation requirement of the crystal optics, a pulse-energy versus repetition-rate phase space has been established. The upper bounds of the pulse energy at both first-turn and period-end times decreases with repetition rate, especially at the period-end time. The upper bound of the thermal deformation of the crystal at the period-end time for any repetition frequency can be estimated from the CW case. For a water-cooled diamond crystal of dimension 5 mm × 5 mm × 0.05 mm, the time to reach a quasi steady-state is about 50 ms for temperature and 50 µs for thermal deformation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗