Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Coupling finite and boundary element methods for two-dimensional potential problems

A finite element-boundary element (FE-BE) coupling method based on a weighted residual variational method is presented for potential problems, governed by either the Laplace or the Poisson equations. In this method, a portion of the domain of interest is modeled by finite elements (FE) and the remainder of the region by boundary elements (BE). Because the BE fundamental solutions are valid for infinite domains, a procedure that limits the effects of the BE fundamental solution to a small region adjacent to the FE region, called the transition region (TR), is developed. This procedure involves a judicious choice of functions called the transition (T) functions that have unit values on the BE-TR interface and zero values on the FE-TR interface. The present FE-BE coupling algorithm is shown to be independent of the extent of the transition region and the choice of the transition functions. Therefore, transition regions that extend to only one layer of elements between FE and BE regions and the use of simple linear transition functions work well.

Krishnamurthy, T.↗

Digital receiver for on-board FM/FSK-FM/BPSK demodulation

An all-digital demodulator FM/FSK-FM/BPSK is presented. The proposed architecture allows the 1-bit IF down-sampling technique with the hardware simplification of receiver analog section. The receiver exhibits great flexibility both in terms of signal demodulation (FSK or BPSK, subcarrier/ tone frequency, data rate) and interface capability. The demodulator is going to be realized in a VLSI chip (20 Kgate complexity). This paper describes the demodulator structure and its demodulation performances obtained with a breadboard based on programmable logic devices. The choice of a simple and effective scheme for frequency detection (FM and FSK demodulators) is suggested by system design considerations as well. Signal processing algorithms include also a Costas carrier phase recovery scheme in the case of BPSK signal and data transition tracking loop for the bit clock recovery. Test results address this solution as one of the most suitable for TT&C space application.

Boscagli, G.↗

Nucleation and chiral symmetry breaking under controlled hydrodynamic flows

The effects of hydrodynamic convection on nucleation and broken chiral symmetry have been investigated for a simple inorganic molecule, sodium chlorate (NaClO3). Our experiment suggests that the symmetry breaking is a result of hydrodynamic amplification of rare nucleation events. The effect is more pronounced when the primary nucleation occurs on the solute-vapor interface, where mixing in the surface sublayer becomes important. The transition from the achiral to the chiral states appears to be smooth as the hydrodynamic parameters, such as flow rate, are varied.

Wu, Xiao-Lun↗

Direct Numerical Simulation of Acoustic Waves Interacting with a Shock Wave in a Quasi-1D Convergent-Divergent Nozzle Using an Unstructured Finite Volume Algorithm

Numerical simulation of a very small amplitude acoustic wave interacting with a shock wave in a quasi-1D convergent-divergent nozzle is performed using an unstructured finite volume algorithm with a piece-wise linear, least square reconstruction, Roe flux difference splitting, and second-order MacCormack time marching. First, the spatial accuracy of the algorithm is evaluated for steady flows with and without the normal shock by running the simulation with a sequence of successively finer meshes. Then the accuracy of the Roe flux difference splitting near the sonic transition point is examined for different reconstruction schemes. Finally, the unsteady numerical solutions with the acoustic perturbation are presented and compared with linear theory results.

Bui, Trong T.↗

Pulsed Plasma Acceleration Modeling in Detonation and Deflagration Modes

Gas-fed electromagnetic pulsed plasma accelerators discharge electrical energy into a gas to ionize and electromagnetically accelerate propellant in the domain. Efforts to model pulsed accelerators have either assumed that the discharge is short and completely transient, accelerating the gas by entraining it in a moving current sheet, or that the discharge is relatively long, establishing a stable quasi-steady current distribution pattern that accelerates a plasma flowing through it. There have been pulsed plasma accelerator tests that appear to fit somewhere between these two bounds, exhibiting some properties that are associated with the purely transient devices while also showing others that are associated with quasi-steady-state plasma acceleration. A model is presented based upon the premise that all pulsed plasma accelerators first form an accelerating current sheet (detonation mode accelerator). Depending upon the pulse length and the gas conditions in the dis- charge channel, the plasma sheet may reach the end of the accelerator before the discharge has completed a full half-cycle, wherein the proposed model transitions to a quasi-steady description of the acceleration process (deflagration mode accelerator). A review of the entire model is presented, highlighting improvements and upgrades implemented to aid in the stability of the numerical scheme used to model the gas flow in the channel and an improved treatment of current sheet mass shedding, which adds gas to the wake of the sheet. The assumptions employed to model the transition from detonation to deflagration mode are presented and used to generate solutions to the governing equations. The modeling of the deflagration-mode under the present assumptions results in very low deflagration impulse bits relative to those obtained at the end of the detonation mode, implying that the present assumptions and modeling of the deflagration mode may not represent a fruitful approach.

Polzin, Kurt A.↗

Pulsed Plasma Acceleration Modeling in Detonation and Deflagration Modes

Gas-fed electromagnetic pulsed plasma accelerators discharge electrical energy into a gas to ionize and electromagnetically accelerate propellant in the domain. Efforts to model pulsed accelerators have either assumed that the discharge is short and completely tran- sient, accelerating the gas by entraining it in a moving current sheet, or that the discharge is relatively long, establishing a stable quasi-steady current distribution pattern that accel- erates a plasma flowing through it. There have been pulsed plasma accelerator tests that appear to fit somewhere between these two bounds, exhibiting some properties that are associated with the purely transient devices while also showing others that are associated with quasi-steady-state plasma acceleration. A model is presented based upon the premise that all pulsed plasma accelerators first form an accelerating current sheet (detonation mode accelerator). Depending upon the pulse length and the gas conditions in the dis- charge channel, the plasma sheet may reach the end of the accelerator before the discharge has completed a full half-cycle, wherein the proposed model transitions to a quasi-steady description of the acceleration process (deflagration mode accelerator). A review of the entire model is presented, highlighting improvements and upgrades implemented to aid in the stability of the numerical scheme used to model the gas flow in the channel and an im- proved treatment of current sheet mass shedding, which adds gas to the wake of the sheet. The assumptions employed to model the transition from detonation to deflagration mode are presented and used to generate solutions to the governing equations. The modeling of the deflagration-mode under the present assumptions results in very low deflagration im- pulse bits relative to those obtained at the end of the detonation mode, implying that the present assumptions and modeling of the deflagration mode may not represent a fruitful approach.

Polzin, Kurt A.↗

Thermal Cycle and Capacitance Testing of Mezzo Industries Phase Changer Material Heat Capacitor

Effective Thermal management is essential for the safety and performance of human spacecraft, especially during long-duration missions with fluctuating heat loads. Phase Change Material (PCM) heat exchangers offer a compact, efficient solution by storing and releasing thermal energy through latent heat during phase transitions. This allows PCM systems to buffer transient thermal loads without immediate heat rejection, reducing the need for oversized radiators – particularly critical during ascent and re-entry when radiators are stowed. By maintaining stable temperatures in crew cabins and equipment bays, PCM technology enhances crew comfort, protects sensitive systems, and supports long-term mission sustainability with minimal mass and volume impact. A phase change material heat capacitor prototype, designed and built under a NASA Small Business Innovation Research grant by Mezzo Technologies, utilizes a laser welding microtube manufacturing process that promises increased reliability and performance over current manufacturing methods like brazing. This heat exchanger was tested through coolant thermal cycling within the expected flow rates and temperature range of the Orion spacecraft, the crewed spacecraft taking NASA astronauts to the moon under the Artemis Program. The useful heat storage capacitance was measured and compared to Orion spacecraft requirements.

Active Thermal Control Systems↗

Carbon material supported hollow metal oxide nanoparticles, methods and applications

A method for preparing a material composition comprising a hollow transition metal oxide nanoparticle supported upon a carbon material support includes a solution impregnation process step, followed by a thermal reduction process step and finally a thermal oxidation process step. The material composition, an electrode and an electrical component such as but not limited to a battery are all predicated at least in-part upon the material composition prepared in accord with the foregoing method. The foregoing material composition, electrode, battery and method may ultimately provide a LIB with enhanced performance.

36 MATERIALS SCIENCE↗

Carbon material supported hollow metal oxide nanoparticles, methods and applications

A method for preparing a material composition comprising a hollow transition metal oxide nanoparticle supported upon a carbon material support includes a solution impregnation process step, followed by a thermal reduction process step and finally a thermal oxidation process step. The material composition, an electrode and an electrical component such as but not limited to a battery are all predicated at least in-part upon the material composition prepared in accord with the foregoing method. The foregoing material composition, electrode, battery and method may ultimately provide a LIB with enhanced performance.

Yu, Yingchao↗

Structural characterization of the FeTiO{sub 3}-MnTiO{sub 3} solid solution

We have synthesized the (Mn{sub 1-x}Fe{sub x})TiO{sub 3} (0.0{<=}x{<=}1.0) solid solution compounds by high-temperature sintered methods, and characterized their crystal structures by combining X-ray diffraction, Moessbauer spectroscopy and Raman spectroscopy. Lattice constants and volumes show a linear decrease with increase in FeTiO{sub 3} content. All experimental results illustrate a decreasing distortion of TiO{sub 6} (or FeO{sub 6}/MnO{sub 6}) octahedra with increase in FeTiO{sub 3} content. The vibrational frequency of O---Ti---O bending motions presents a direct dependence on the corresponding bond angle (the <O---Ti---O). - Graphical abstract: Raman spectra of the (Mn{sub 1-x}Fe{sub x})TiO{sub 3} (0.0{<=}x{<=}1.0) system. Inset: the enlarged view from 310 to 390 cm{sup -1}. E{sub g(3)} shifts to high frequency and the remaining shifts to low frequency as xFeTiO{sub 3} content increases

36 MATERIALS SCIENCE↗

SRNL Nuclear Material Management Strategy

Savannah River National Laboratory (SRNL) is a multidisciplinary laboratory located on the Savannah River Site (SRS) that specializes in applying state-of-the-art science to provide practical solutions to complex technical problems. In 2021 SRNL went through a contract transition to become an independent Federally Funded Research and Development center which kicked off a period of rapid growth in research and an increased demand for the limited nuclear material capacity. A systematic process was developed for analyzing nuclear material holdings to optimize retention and streamline efforts to disposition legacy material without jeopardizing program execution. This process focused on utilizing the expertise of researchers to identify materials for disposition and retention while creating the visibility of tracking metrics for management to monitor material utilization. This resulted in a ~20% reduction in the powder Material At Risk (MAR) and identified additional candidates that could reduce transuranic holdings by an additional ~30% without endangering future program growth.

Ramsey, Catherine M.↗

Dissipation in thin superconducting current biased films due to vortex motion

Recently, the problem of dissipation in thin superconducting films with thickness d on the order of the coherence length {zeta}, and width {omega} much narrower than the Pearl length, {Lambda} >> {omega} >> {zeta}, was discussed as the main cause for the behavior of I-V characteristics observed in thin high-temperature superconducting films. In thin and narrow films or strips with width w >> {zeta} the barrier for phase slips by creation of temporary normal regions across the entire film width is too big, thus phase slips become highly improbable. Instead, we consider a vortex crossing the strip from one edge to the other, perpendicular to the bias current, as the dominant mechanism for generalized phase slips resulting in detectable voltage pulses. We derive the rate of vortex crossings using the general theory of transition rates between metastable states. In mean field theory, the saddle point solution of the rate equation gives the vortex position inside the strip, where the kinetic energy of supercurrents is maximum. However, the free energy barrier derived in such an approach is strongly renormalized by superconducting fluctuations and this effect was not accounted for previously. They drastically reduce the rate of vortex crossings and, consequently, dissipation. We present results for the amplitude and duration of voltage pulses induced by vortex motion and their consequences on I-V characteristics, when heating due to vortex crossings is negligible. We found ohmic behavior at low bias currents, power law behavior at intermediate currents and exponential I-V characteristics at currents close to the critical one. The impact of vortex motion in superconducting strips on the observation of so-called dark counts (voltage pulses) in superconducting nanowire single-photon detectors is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of {beta}-nickel hydroxide plate-like structures under mild conditions and their optical properties

Nanostructural {beta}-nickel hydroxide ({beta}-Ni(OH){sub 2}) plates were prepared using the microwave-hydrothermal (MH) method at a low temperature and short reaction times. An ammonia solution was employed as the coordinating agent, which reacts with [Ni(H{sub 2}O){sub 6}]{sup 2+} to control the growth of {beta}-Ni(OH){sub 2} nuclei. A trigonal {beta}-Ni(OH){sub 2} single phase was observed by X-ray diffraction (XRD) analyses, and the crystal cell was constructed with structural parameters and atomic coordinates obtained from Rietveld refinement. Field emission scanning electron microscopy (FE-SEM) images revealed that the samples consisted of hexagonal-shaped nanoplates with a different particle size distribution. Broad absorption bands assigned as transitions of Ni{sup 2+} in oxygen octahedral sites were revealed by UV-vis spectra. Photoluminescence (PL) properties observed with a maximum peak centered in the blue-green region were attributed to different defects, which were produced during the nucleation process. We present a growth process scheme of the {beta}-Ni(OH){sub 2} nanoplates. - Graphical abstract: Nanostructural {beta}-Ni(OH){sub 2} crystalline powders were prepared by rapid microwave-hydrothermal method for 1, 8 and 32 min. The hexagonal-shaped nanoplates obtained presented PL emission in the blue-green region and each decomposed component represents a different type of electronic transition, which can be linked to the structural arrangement or surface defects. Highlights: > Ammonia solution to control the growth of {beta}-Ni(OH){sub 2} nuclei. > Regular plates-shape related to crystallization-dissolution-recrystallization. > The surface states and lattice defects generated in growth mechanism of crystals. > Different defects produced in the growth process responsible by photoluminescence. > Each component of photoluminescence curve linked to structural arrangement or surface defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

OR-AGENT framework – Architecting electrified heavy-duty drayage applications

The widespread adoption of zero-emission vehicles in heavy-duty (HD) commercial freight transportation faces considerable technoeconomic challenges. For heavy-duty trucks, ensuring high uptime, cost parity with diesel, and safety standards is especially critical as these vehicles operate over long distances with heavy loads, where any downtime or off-nominal behaviors significantly impacts logistics, productivity, and the total cost of ownership. Unlike traditional diesel refueling, BEV charging infrastructure must be co-optimized with vehicle deployment, operational demands, and grid capacity to ensure cost-effective and reliable freight operations. However, the lack of a standardized ownership and service model has led to a fragmented approach—where commercial vehicle operators may invest in, own, and maintain both vehicle/batteries and charging/energy infrastructure. This disconnect may exclude energy service providers from the equation, forcing fleet operators to explore ‘behind-the-fence’ energy solutions that increase capital investment, operational downtime, overhead costs, and, in some cases, net carbon emissions. To address these issues, this study introduces OR-AGENT (Optimal Regional Architecture Generation for Efficient National Transport), a comprehensive modeling framework that integrates powertrain architectures, charging infrastructures, and energy backbone systems into a cohesive strategy. In this paper, OR-AGENT is applied to develop an interconnected systems architecture for energy efficiency and resiliency enhancement of heavy-duty drayage vehicles at the Port of Savannah, GA. This framework showcases an interconnected systems approach to electrifying heavy-duty drayage vehicles at the Port of Savannah, GA. The study assessed BEVs with 400–1200 kWh battery capacities, accounting for seasonal variations in weather and freight routing. A diverse charging mix (150 kW–1250 kW) was evaluated alongside grid capacity constraints, cost, and carbon intensity analysis, leading to the development of a strategic microgrid/Distributed Energy Resources (DER) deployment architecture to ensure a reliable and sustainable transition. However, the findings also highlight the need for alternative zero-emission solutions for remaining trips, such as larger batteries, electrified roadways, hydrogen powertrains, or net-zero emission fuels. In conclusion, the findings are incorporated into a Total Cost of Ownership (TCO) model to identify optimal architectures for an interconnected electrified ecosystem.

Commercial vehicles↗

Laminar-Turbulent Transition in High Mach-Number Flows

Accurate prediction of laminar-turbulent transition is critical for the design and characterization of high-speed flight systems. Presently, laminar-turbulent transition prediction in computational fluid dynamics (CFD) is accomplished using PDE-based models coupled to the governing equations of the flow system. Current industrial models suffer significant performance issues when analyzing high-speed systems because they were developed for lower speed flows. Current research focuses on multiple solutions to this problem. The coupling of physics-based stability analysis tools which produce quality transition predictions for high-speed flows to NASA’s OVERFLOW CFD solver is being pursued, as well as the implementation and improvement of emerging models developed specifically for high-speed flow.

High-Speed Flow↗

Crystal and electronic structures of CaAl{sub 2}Si{sub 2}-type rare-earth copper zinc phosphides RECuZnP{sub 2} (RE=Pr, Nd, Gd-Tm, Lu)

The quaternary rare-earth phosphides RECuZnP{sub 2} (RE=Pr, Nd, Gd-Tm, Lu) have been prepared by reaction of the elements at 900 {sup o}C, completing this versatile series which forms for nearly all RE metals. They adopt the trigonal CaAl{sub 2}Si{sub 2}-type structure (Pearson symbol hP5, space group P3-bar m1, Z=1), as confirmed by single-crystal X-ray diffraction analysis on ErCuZnP{sub 2} and powder X-ray diffraction analysis on the remaining members. The Cu and Zn atoms are assumed to be disordered over the single transition-metal site. Band structure calculations on a hypothetically ordered YCuZnP{sub 2} model suggest a semimetal, with a zero band gap between the valence and conduction bands. This electronic structure is supported by XPS valence band spectra for RECuZnP{sub 2} (RE=Gd-Er), in which the intensity drops off smoothly at the Fermi edge. The absence of a band gap permits the electron count to deviate from the precise value of 16 e{sup -} per formula unit, as demonstrated by the formation of a solid solution in GdCu{sub x}Zn{sub 2-x}P{sub 2} (1.0{<=}x{<=}1.3), while still retaining the CaAl{sub 2}Si{sub 2}-type structure. Because the Cu 2p XPS spectra indicate that the Cu atoms are always monovalent, the substitution of Cu for Zn leads to a decrease in electron count and a lowering of the Fermi level in the valence band. The magnetic susceptibility of RECuZnP{sub 2} (RE=Gd-Er), which obeys the Curie-Weiss law, confirms the presence of trivalent RE atoms. -- Graphical abstract: The absence of a band gap in the semimetallic quaternary rare-earth phosphides RECuZnP{sub 2} permits the formation of a solid solution such as GdCu{sub x}Zn{sub 2-x}P{sub 2} through hole-doping of the valence band. Display Omitted

36 MATERIALS SCIENCE↗

Outflow Boundary Conditions for Turbine-Integrated Rotating Detonation Combustors

This study examines outflow boundary conditions (BCs) in computational fluid dynamics (CFD) simulations of a transition duct with and without guide vanes that converts supersonic flow exiting a rotating detonation combustor (RDC) to subsonic flow to drive a turbine. Since the flow exiting the transition duct has swirling shock waves with significant spatial and temporal variations in pressure, temperature, and Mach number, imposing proper BCs poses a challenge. To ensure all swirling shock waves exit the transition duct without creating non-physical reflected waves at its outlet, this study examined three outflow BCs: (1) the average pressure imposed at the duct’s outlet, (2) a nonreflecting BC (NRBC) with a specified average pressure imposed at the duct’s outlet, (3) the average pressure imposed at the outlet of an extension duct made up of a buffer layer and a sponge layer. This study is based on the three-dimensional, unsteady density-weighted-ensemble-averaged continuity, Navier–Stokes, and energy equations for a thermally perfect gas closed by the realizable k–ε model and “enhanced” wall functions. The results obtained show that imposing an average pressure at the transition duct’s outlet produces spurious waves that degrade the physical meaningfulness of the solution. When the NRBC was applied, swirling shock waves exited the duct’s outlet without creating spurious waves. However, its usage requires the gas to be thermally, as well as calorically, perfect, which this study shows could be a concern. By imposing the average pressure at the outlet of an extension duct, the gas does not need to be calorically perfect. The results obtained show the effects of the sponge layer’s length and coarsening ratio on damping nonuniformities in non-physical reflected waves to ensure the flow exiting the transition duct’s outlet can do so as if there are no boundaries present and has the desired average pressure—even though the BC is applied at the extension duct’s outlet.

gas turbines↗

Catch and Release: Orbital Symmetry Guided Reaction Dynamics from a Freed “Tension Trapped Transition State”

The dynamics of reactions at or in the immediate vicinity of transition states are critical to reaction rates and product distributions, but direct experimental probes of those dynamics are rare. In this paper, s-trans, s-trans 1,3-diradicaloid transition states are trapped by tension along the backbone of purely cis-substituted gem-difluorocyclopropanated polybutadiene using the extensional forces generated by pulsed sonication of dilute polymer solutions. Once released, the branching ratio between symmetry-allowed disrotatory ring closing (of which the trapped diradicaloid structure is the transition state) and symmetry-forbidden conrotatory ring closing (whose transition state is nearby) can be inferred. Finally, net conrotatory ring closing occurred in 5.0 ± 0.5% of the released transition states, in excellent agreement with ab initio molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗