SEARCH · Engineering Papers

Results for “THICKNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Interpretation of spectral optical thickness observations of the El Chichon eruption cloud

It is pointed out that the recent El Chichon eruption has provided a unique opportunity to observe a short-term climate change event. In October 1982 and in May 1983 observation experiments were undertaken to determine the spectral optical thickness of the El Chichon eruption cloud during airborne latitudinal surveys. One of two basic objectives to the observation experiment was the conduction of direct measurements of the optical thickness for radiation and climate studies. In connection with the second objective, inferences of the physical characteristic of the volcanic cloud were to be obtained on the basis of an application of remote sensing techniques. The present paper is concerned with the second objective, taking into account questions regarding the feasibility to conduct a meaningful analysis of the variation of the aerosol size distribution with latitude on the basis of the accuracy of the measured data.

Spinhirne, J. D.↗

NASA NTRS1985

Latitude survey of aerosol optical thickness of the El Chichon eruption cloud in May 1983

The results of measurements of the latitudinal distribution of the El Chichon eruption cloud in May 1983 for the latitude range between 71 deg N and 56 deg S are presented. Aerosol optical thicknesses are calculated from solar spectral extinction measurements made with a sunphotometer on board the NASA Convair 990 aircraft. It is shown that the thicknesses vary in the range between 0.12 and 0.01, that a maximum of about 0.12 is found at middle latitudes, and that distinct minima of 0.01-0.02 are observed at 25-deg latitude in both hemispheres. The median radius of particles is found to be between 0.16 micron and 0.18 micron in the northern hemisphere and between 0.11 micron and 0.15 micron in the southern hemisphere. Rough estimates of aerosol mass indicate that about 1.5 megatonnes of aerosol still persisted in the stratosphere between the equator and 25-deg N one year after the eruption.

Shah, G. M.↗

NASA NTRS1985

An evaluation of the effects of stacking sequence and thickness on the fatigue life of quasi-isotropic graphite/epoxy laminates

Notched and unnotched geometries at 16, 32, and 64-ply thicknesses of a 90/45/0-45 (ns) laminate and a 45/0/-45/90 (ns) laminate were tested in compression-compression fatigue. The fatigue life and the initiation, type, and progression of damage were determined. Interlaminar stresses generated at straight, free edges of axially loaded laminates were used to interpret the test results. The fatigue lives of the notched specimens did not appear to be a strong function of laminate stacking sequence or specimen thickness. The stress concentration at the hole dominated over the interlaminar stresses at the straight free edge. The unnotched specimens of the 90/45/0/-45 (ns) laminate with tensile interlaminar normal stresses delaminated more readily than did the 45/0/-45/90 (ns) laminate with compressive interlaminar normal stress. The life of the 16-ply unnotched specimens was lower than the 32and 64-ply specimens. Delaminations were located at the interface where the maximum shear stress occurred regardless of the sense or magnitude of the interlaminar normal stress. An antibuckling fixture was effective in preventing out-of-plane motion without overconstraining the specimen.

Harris, C. E.↗

NASA NTRS1986

Capacitive Gauge Measures Film Thickness

Rugged capacitive transducer measures thickness of film of liquid flowing over wind-tunnel model or other object. Transducer mounted flush with surface of model to preserve model outline, thus minimally disturbing wind-tunnel and film flows. Additional uses include thickness control of paint or nonmetallic solid films.

Seegmiller, H. L.↗

NASA NTRS1986

Effects of thickness and ply orientation on buckling of laminated plates

The buckling loads of laminated plates are predicted using a new theory which takes into account transverse shearing effects. This new theory assumes trigonometric terms through-the-thickness in the displacements to take into account transverse shearing effects in thick plates. Buckling loads predicted by the new theory and by traditional theories are compared for isotropic and laminated plates. The effect of ply orientation on the buckling loads predicted by each theory is demonstrated.

Jegley, D. C.↗

NASA NTRS1985

Rings of Uranus - Not so thick, not so black

Regarding the optical thickness of the rings of Uranus (measured by stellar occultations), it is shown that the optical thickness so obtained is larger by an extinction efficiency factor of 2 than the fractional area physically filled by particles which is commonly used to infer both particle reflectivity and particle size. New estimates of particle reflectance are presented, which include this effect and an improved radiative transfer treatment. The ring particles, while still quite dark, are no longer mysteriously so. Particle sizes could easily lie in the macroscopic size range characteristic of other planetary rings.

Cuzzi, J. N.↗

NASA NTRS1985

Cloud optical thickness feedbacks in the CO2 climate problem

A radiative-convective equilibrium model is developed and applied to study cloud optical thickness feedbacks in the CO2 climate problem. The basic hypothesis is that in the warmer and moister CO2-rich atmosphere, cloud liquid water content will generally be larger than at present, so that cloud optical thickness will be larger too. For clouds other than thin cirrus, the result is to increase the albedo more than to increase the greenhouse effect. Thus the sign of the feedback is negative: cloud optical properties alter in such a way as to reduce the surface and tropospheric warming caused by the addition of CO2. This negative feedback can be substantial. When observational estimates of the temperature dependence of cloud liquid water content are employed in the model, the surface temperature change due to doubling CO2 is reduced by about one half.

Somerville, R. C. J.↗

NASA NTRS1985

High-spatial-resolution studies of young stellar objects. II - A thick disk surrounding Lynds 1551, IRS 5

Heavily oversampled, small (2 arcsec) beam 2 micron maps of the region surrounding Lynds 1551, IRS 5 provide the basis for reconstructing maximum-entropy 'images' which have an effective spatial resolution of about 0.6 arcsec. These images reveal an extended, cusp-like structure surrounding IRS 5. This structure most likely results as light from IRS 5 is scattered in our direction by dust grains located in a thick disk of diameter 1000 AU. The disk is viewed nearly edge-on and has a mass in dust grains of 2 to 5 x 10 to the -5th solar masses. Its polar axis lies along the observed direction of the bipolar mass outflow inferred from molecular line observations of the L1551 cloud. It is possible that the observed infrared disk may represent the inner regions of a much larger thick-disk structure, whose shape derives from the combined effects of disk rotation and the gravitational field of IRS 5.

Strom, S. E.↗

NASA NTRS1986

Fast approach for calculating film thicknesses and pressures in elastohydrodynamically lubricated contacts at high loads

The film thicknesses and pressures in elastohydrodynamically lubricated contacts have been calculated for a line contact by using an improved version of Okamura's approach. The new approach allows for lubricant compressibility, the use of Roelands' viscosity, a general mesh (nonconstant step), and accurate calculations of the elastic deformation. The new approach is described, and the effects on film thickness, pressure, and pressure spike of each of the improvements are discussed. Successful runs have been obtained at high pressure (to 4.8 GPa) with low CPU times.

Houpert, L. G.↗

NASA NTRS1986

An equilibrium method for prediction of transverse shear stresses in a thick laminated plate

First two equations of equilibrium are utilized to compute the transverse shear stress variation through thickness of a thick laminated plate after in-plane stresses have been computed using an assumed quadratic displacement triangular element based on transverse inextensibility and layerwise constant shear angle theory (LCST). Centroid of the triangle is the point of exceptional accuracy for transverse shear stresses. Numerical results indicate close agreement with elasticity theory. An interesting comparison between the present theory and that based on assumed stress hybrid finite element approach suggests that the latter does not satisfy the condition of free normal traction at the edge. Comparison with numerical results obtained by using constant shear angle theory suggests that LCST is close to the elasticity solution while the CST is closer to classical (CLT) solution. It is also demonstrated that the reduced integration gives faster convergence when the present theory is applied to a thin plate.

Chaudhuri, R. Z.↗

NASA NTRS1986

Input impedance of a probe-fed circular microstrip antenna with thick substrate

A method of computing the input impedance for the probe fed circular microstrip antenna with thick dielectric substrate is presented. Utilizing the framework of the cavity model, the fields under the microstrip patch are expanded in a set of modes satisfying the boundary conditions on the eccentrically located probe, as well as on the cavity magnetic wall. A mode-matching technique is used to solve for the electric field at the junction between the cavity and the coaxial feed cable. The reflection coefficient of the transverse electromagnetic (TEM) mode incident in the coaxial cable is determined, from which the input impedance of the antenna is computed. Measured data are presented to verify the theoretical calculations. Results of the computation of various losses for the circular printed antenna as a function of substrate thickness are also included.

Davidovitz, M.↗

NASA NTRS1987

Measuring Thicknesses of Wastewater Films

Sensor determines when thickness of film of electrically conductive wastewater on rotating evaporator drum exceeds preset value. Sensor simple electrical probe that makes contact with liquid surface. Made of materials resistant to chemicals in liquid. Mounted on shaft in rotating cylinder, liquid-thickness sensor extends toward cylinder wall so tip almost touches. Sensor body accommodates probe measuring temperature of evaporated water in cylinder.

Schubert, F. H.↗

NASA NTRS1987

Performance of two 10-lb/sec centrifugal compressors with different blade and shroud thicknesses operating over a range of Reynolds numbers

Centrifugal compressors often cannot be directly scaled to very small flow sizes because of structural and manufacturing limitations. The inability to directly scale all design parameters leads to a performance loss other than that which can be associated with the lower Reynolds number. A 10-lb/sec centrifugal compressor was scaled down to 2-lb/sec where adjustments to blade and shroud thickness and fillet radii were required. The modified 2-lb/sec compressor was then directly scaled back up to 10 lb/sec so that the effect of the modifications could be determined. The performance of the two 10-lb/sec compressors is compared over a range of speed and mass flow. The effect of variations in Reynolds number, impeller tip clearance, and shroud thickness on compressor performance is also presented.

Skoch, Gary J.↗

NASA NTRS1987

Measurement of opaque film thickness

The theoretical and experimental framework for thickness measurements of thin metal films by low frequency thermal waves is described. Although it is assumed that the films are opaque and the substrates are comparatively poor thermal conductors, the theory is easily extended to other cases of technological interest. A brief description is given of the thermal waves and the experimental arrangement and parameters. The usefulness of the technique is illustrated for making absolute measurements of the thermal diffusivities of isotropic substrate materials. This measurement on pure elemental solids provides a check on the three dimensional theory in the limiting case of zero film thickness. The theoretical framework is then presented, along with numerical calculations and corresponding experimental results for the case of copper films on a glass substrate.

Thomas, R. L.↗

NASA NTRS1987

Performance of two 10-lb/sec centrifugal compressors with different blade and shroud thicknesses operating over a range of Reynolds numbers

Skoch, Gary J.↗

NASA NTRS1988

The ratio of microwaves to X-rays in solar flares: The case for the thick target model

The expected ratio of synchrotron microwave radiation to bremsstrahlung X-rays for thick target, thin target, and multithermal solar flare models is calculated. The calculations take into account the variation of the microwave to X-ray ratio with X-ray spectral index. The theoretical results are compared with observed ratios of a sample of 51 solar flares with well known spectral index. From this it is concluded that the nonthermal thick target model with a loop length of and order of 10 to the 9th power cm and a magnetic field of 500 + or - 200 G provides the best fit to the data. The thin target and multithermal models require unreasonably large density or pressure and/or low magnetic field to match the data.

Lu, Edward T.↗

NASA NTRS1988

Liquid thickness gauge

A method and apparatus are developed to measure the thickness of a liquid on a surface independent of liquid conductivity. Two pairs of round, corrosion resistant wires are mounted in an insulating material such that the cross-sectional area of each wire is flush with and normal to the surface. The resistance between each pair of wires is measured using two ac resistance measuring circuits, in which the ratio of the outputs of the two resistance measuring circuits is indicative of the thickness of the liquid on the surface.

Weinstein, Leonard M.↗

NASA NTRS1987

Progress in determining the thickness and distribution of volcanic materials on Mars

Volcanic plains and constructs comprise over half the surface of Mars. Volume estimates require sensible estimates of the thickness of volcanic materials. The completion of the 1:2 M Viking photomosaics and a refined geologic map based on Viking photography set the stage for improved thickness studies and volume estimates. Currently, a revised (but incomplete) data base of 740 partially buried craters was compiled using Mars photomosaics at 1:2 M for initial identification and measurement.

Dehon, R. A.↗