Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

A Bayesian Approach to Regional Decadal Predictability: Sparse Parameter Estimation in High-Dimensional Linear Inverse Models of High-Latitude Sea Surface Temperature Variability

Stochastic reduced models are an important tool in climate systems whose many spatial and temporal scales cannot be fully discretized or underlying physics may not be fully accounted for. One form of reduced model, the linear inverse model (LIM), has been widely used for regional climate predictability studies—typically focusing more on tropical or midlatitude studies. However, most LIM fitting techniques rely on point estimation techniques deriving from fluctuation–dissipation theory. In this methodological study we explore the use of Bayesian inference techniques for LIM parameter estimation of sea surface temperature (SST), to quantify the skillful decadal predictability of Bayesian LIM models at high latitudes. We show that Bayesian methods, when compared to traditional point estimation methods for LIM-type models, provide better calibrated probabilistic skill, while simultaneously providing better point estimates due to the regularization effect of the prior distribution in high-dimensional problems. We compare the effect of several priors, as well as maximum likelihood estimates, on 1) estimating parameter values on a perfect model experiment and 2) producing calibrated 1-yr SST anomaly forecast distributions using a preindustrial control run of the Community Earth System Model (CESM). Finally, we employ a host of probabilistic skill metrics to determine the extent to which an LIM can forecast SST anomalies at high latitudes. We find that the choice of prior distribution has an appreciable impact on estimation outcomes, and priors that emphasize physically relevant properties enhance the model’s ability to capture variability of SST anomalies.

54 ENVIRONMENTAL SCIENCES↗

Analysis of condensates formed at the Viking 2 lander site - The first winter

Relative surface albedo, spectral reflectance estimates and a limited photometric function are reduced from Viking 2 lander data obtained during a 249 Mars day period, in the lander's first year, when a light ground covering appeared on the surface. During the deposition, surface broadband albedo more than doubled and blue reflectance increased by a factor of 4.0. Comparison of lander data with earlier laboratory measurements of CO2 and H2O frosts and snows shows that reflectance estimates do not resemble either of those solids. The condensate reflectance resembles that of the surface after the covering disappeared. The covering may have been colored by dust which fell before it, by dust mixed with it, or by dust on top of it; but the data strongly support a mixture of dust with H2O and CO2 solids. The covering thickness is estimated to be between 0.5 and a few millimeters.

Wall, S. D.↗

Resonant decay of global MHD modes at 'thick' interfaces

A global surface mode can exist on a 'surface' which is not a true discontinuity, but without sufficient dissipation it is not a normal mode and it decays in time via resonance absorption. The decay rate can be calculated analytically when the 'surface' is thin. The goal of this paper is to numerically estimate the decay rate when the surface is not thin. A cold plasma in a uniform magnetic field is considered in which density varies linearly across the 'surface'. In this linearized calculation, the global surface mode is driven in steady state by an antenna located in one of the uniform regions external to the surface. The frequency is a free parameter, and resonance curves are computed numerically without approximations. The widths of the resonance curves are used to estimate the free decay times of undriven surface modes, via the uncertainty principle. When applied to the active solar corona, the decay rates are large enough to account for the coronal heating, but it should be kept in mind that the role of nonlinearity in resonance absorption is still undetermined.

Hollweg, Joseph V.↗

Code for paper "Reconstructing an Implosion with Space-Time Smoothing of Velocimetry Traces"

New diagnostics to obtain high-temporal resolution observation of surface velocity provide a rich collection of data from high-explosive (HE) experiments. Using this data to estimate the temporal evolution of an imploding, HE-driven surface is of great interest for validating simulation of the physical system and for design of future experiments. This is the code for a paper in which we propose a method for using a Gaussian process to estimate the surface position over time and provide uncertainty estimates on that reconstruction accounting for measurement error, uncertainty to sparse spatial sampling velocity data, and robustness to outlying observations. In the paper, the code is applied on data from a hemispherical HE implosion experiment. This code is for release with the paper for peer-review, replicating the results and making the figures from the paper.

Grosskopf, Michael↗

A new method for estimating the turbulent heat flux at the bottom of the daily mixed layer

Temperature data in the mixed layer and net solar irradiance data at the sea surface are used to estimate the vertical turbulent heat flux at the bottom of the daily mixed layer. The method is applied to data obtained in the eastern tropical Pacific, where the daily cycle in the temperature field is confined to the upper 10-25 m. Equatorial turbulence measurements indicate that the turbulent heat flux is much greater during nighttime than daytime.

Imawaki, Shiro↗

Radar investigation of asteroids

Radar investigations were conducted of selected minor planets, including: (1) observations during 1981-82 of 10 potential targets (2 Pallas, 8 Flora, 12 Victoria, 15 Eunomia, 19 Fortuna, 22 Kalliope, 132 Aethra, 219 Thusnelda, 433 Eros, and 2100 Ra-Shalom); and (2) continued analyses of observational data obtained during 1980-81 for 10 other asteroids (4 Vesta, 7 Iris, 16 Psyche, 75 Eurydike, 97 Klotho, 216 Kleopatra, 1685 Toro, 1862 Apollo, 1865 Cerberus, and 1915 Quetzalcoatl). Scientific objectives include estimation of echo strength, polarization, spectral shape, spectral bandwidth, and Doppler shift. These measurements: (1) yield estimates of target size, shape, and spin vector; (2) place constraints on topography, morphology, and composition of the planetary surface; (3) yield refined estimates of target orbital parameters; (4) reveal the presence of asteroidal satellites.

Ostro, S. J.↗

Snow thermal conductivity and conductive flux in the Central Arctic: Estimates from observations and implications for models

During the Arctic winter, the conductive heat flux through the sea ice and snow balances the radiative and turbulent heat fluxes at the surface. Snow on sea ice is a thermal insulator that reduces the magnitude of the conductive flux. The thermal conductivity of snow, that is, how readily energy is conducted, is known to vary significantly in time and space from observations, but most forecast and climate models use a constant value. This work begins with a demonstration of the importance of snow thermal conductivity in a regional coupled forecast model. Varying snow thermal conductivity impacts the magnitudes of all surface fluxes, not just conduction, and their responses to atmospheric forcing. Given the importance of snow thermal conductivity in models, we use observations from sea ice mass balance buoys installed during the Multidisciplinary drifting Observatory for the Study of Arctic Climate expedition to derive the profiles of thermal conductivity, density, and conductive flux. From 13 sites, median snow thermal conductivity ranges from 0.33 W m −1 K −1 to 0.47 W m −1 K −1 with a median from all data of 0.39 W m −1 K −1 from October to February. In terms of surface energy budget closure, estimated conductive fluxes are generally smaller than the net atmospheric flux by as much as 20 W m −2 , but the average residual during winter is −6 W m −2 , which is within the uncertainties. The spatial variability of conductive heat flux is highest during clear and cold time periods. Higher surface temperature, which often occurs during cloudy conditions, and thicker snowpacks reduce temporal and spatial variability. These relationships are compared between observations and the coupled forecast model, emphasizing both the importance and challenge of describing thermodynamic parameters of snow cover for modeling the Arctic as a coupled system.

54 ENVIRONMENTAL SCIENCES↗

Assessment of ICESat-2 Sea Ice Surface Classification with Sentinel-2 Imagery: Implications for Freeboard and New Estimates of Lead and Floe Geometry

NASA's Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) mission launched in September 2018 and is now providing high-resolution surface elevation profiling across the entire globe, including the sea ice cover of the Arctic and Southern Oceans. For sea ice applications, successfully discriminating returns between sea ice and open water is key for accurately determining freeboard (the extension of sea ice above local sea level) and new information regarding the geometry of sea ice floes and leads. We take advantage of near-coincident optical imagery obtained from the European Space Agency (ESA) Sentinel-2 (S-2) satellite over the Western Weddell Sea of the Southern Ocean in March 2019 and the Lincoln Sea of the Arctic Ocean in May 2019 to evaluate the surface classification scheme in the ICESat-2 ATL07 and ATL10 sea ice products. We find a high level of agreement between the ATL07 (specular) lead classification and visible leads in the S-2 imagery in these two coincident images across all six ICESat-2 beams, increasing our confidence in the freeboard products and deriving new estimates of the sea ice state. The S-2 overlays provide additional, albeit limited, evidence of the misclassification of dark leads due to clouds. Dark leads are no longer used to derive sea surface and thus freeboard as of the third release (r003) of the ICESat-2 sea ice products. We show estimates of lead fraction and more preliminary estimates of chord length (a proxy for floe size) using two metrics for classifying sea surface (lead) segments across both the Arctic and Southern Ocean for the first winter season of data collection.

A. A. Petty↗

Precipitation observed by the airborne advanced microwave moisture sounder (AMMS)

Airborne radiometric measurements at frequencies near 92 GHz and 183 GHz were conducted over two precipitation events near Wallops Island, Virginia during February, 1986. The measured brightness temperatures are compared with those from calculations to estimate the snowfall and rainfall rates for both events. The estimated rates over water surface are within a factor of two of those derived from the concurrent measurements by the SPANDAR radar at the NASA Wallops Flight Facility. These estimated rates, however, suggest that both snowfall events are light and close to the threshold of radiometric detection especially over land surface. Observations of additional snowfall events with lower frequency channels are needed to demonstrate the approach and to account for cloud effects.

Chang, A. T. C.↗

Estimate of Top-of-Atmosphere Albedo for a Molecular Atmosphere over Ocean using Clouds and the Earth's Radiant Energy System (CERES) Measurements

The shortwave broadband albedo at the top of a molecular atmosphere over ocean between 40deg N and 40deg S is estimated using radiance measurements from the Clouds and the Earth's Radiant Energy System (CERES) instrument and the Visible Infrared Scanner (VIRS) aboard the Tropical Rainfall Measuring Mission (TRMM) satellite. The albedo monotonically increases from 0.059 at a solar zenith angle of 10deg to 0.107 at a solar zenith angle of 60deg. The estimated uncertainty in the albedo is 3.5 x 10(exp -3) caused by the uncertainty in CERES-derived irradiances, uncertainty in VIRS-derived aerosol optical thicknesses, variations in ozone and water vapor, and variations in surface wind speed. The estimated uncertainty is similar in magnitude to the standard deviation of 0.003 that is derived from 72 areas divided by 20deg latitude by 20deg longitude grid boxes. The empirically estimated albedo is compared with the modeled albedo using a radiative transfer model combined with an ocean surface bidirectional reflectivity model. The modeled albedo with standard tropical atmosphere is 0.061 and 0.111 at the solar zenith angles of 10deg and 60deg, respectively. This empirically estimated albedo can be used to estimate the direct radiative effect of aerosols at the top of the atmosphere over oceans.

Kato, S.↗

Bounding Extreme Spacecraft Charging in the Lunar Environment

Robotic and manned spacecraft from the Apollo era demonstrated that the lunar surface in daylight will charge to positive potentials of a few tens of volts because the photoelectron current dominates the charging process. In contrast, potentials of the lunar surface in darkness which were predicted to be on the order of a hundred volts negative in the Apollo era have been shown more recently to reach values of a few hundred volts negative with extremes on the order of a few kilovolts. The recent measurements of night time lunar surface potentials are based on electron beams in the Lunar Prospector Electron Reflectometer data sets interpreted as evidence for secondary electrons generated on the lunar surface accelerated through a plasma sheath from a negatively charged lunar surface. The spacecraft potential was not evaluated in these observations and therefore represents a lower limit to the magnitude of the lunar negative surface potential. This paper will describe a method for obtaining bounds on the magnitude of lunar surface potentials from spacecraft measurements in low lunar orbit based on estimates of the spacecraft potential. We first use Nascap-2k surface charging analyses to evaluate potentials of spacecraft in low lunar orbit and then include the potential drops between the ambient space environment and the spacecraft to the potential drop between the lunar surface and the ambient space environment to estimate the lunar surface potential from the satellite measurements.

Minow, Joseph I.↗

Diagnosing Bias in Modeled Soil Moisture/runoff Coefficient Correlation Using the SMAP Level 4 Soil Moisture Product

The physical parameterization of key processes in land surface models (LSMs) remains uncertain, and new techniques are required to evaluate LSM accuracy over coarse spatial scales. Given the role of soil moisture in the partitioning of surface water fluxes (between infiltration, runoff and evapotranspiration), surface soil moisture (SSM) estimates represent an important observational benchmark for such evaluations. Here, we apply SSM estimates from the NASA Soil Moisture Active Passive Level 4 product (SMAP_L4) to diagnose bias in the coupling between SSM and surface runoff for multiple Noah-Multiple Physics (Noah-MP) LSM parameterization cases. Results demonstrate that Noah-MP surface runoff parameterizations often underestimate the coupling strength between pre-storm SSM and the event-scale runoff coefficient (RC; defined as the ratio between event-scale streamflow and precipitation volumes). This bias squanders RC information contained in pre-storm SSM and reduces RC estimation skill. Such bias can be quantified against an observational benchmark calculated using streamflow observations and SMAP_L4 SSM and applied to explain a substantial fraction of the observed basin-to-basin (and case-to-case) variability in the skill of event-scale Noah-MP RC estimates. Based on this concept, a novel case selection strategy for ungauged basins is introduced and demonstrated to successfully identify poorly performing Noah-MP parameterization cases.

SSM↗

Classification of simple vegetation types using POLSAR image data

Mapping basic vegetation or land cover types is a fairly common problem in remote sensing. Knowledge of the land cover type is a key input to algorithms which estimate geophysical parameters, such as soil moisture, surface roughness, leaf area index or biomass from remotely sensed data. In an earlier paper, an algorithm for fitting a simple three-component scattering model to POLSAR data was presented. The algorithm yielded estimates for surface scatter, double-bounce scatter and volume scatter for each pixel in a POLSAR image data set. In this paper, we show how the relative levels of each of the three components can be used as inputs to simple classifier for vegetation type. Vegetation classes include no vegetation cover (e.g. bare soil or desert), low vegetation cover (e.g. grassland), moderate vegetation cover (e.g. fully developed crops), forest and urban areas. Implementation of the approach requires estimates for the three components from all three frequencies available using the NASA/JPL AIRSAR, i.e. C-, L- and P-bands. The research described in this paper was carried out by the Jet Propulsion Laboratory, California Institute of Technology under a contract with the National Aeronautics and Space Administration.

Freeman, A.↗

Estimation of Aerosol Optical Depth, Pressure Elevation, Water Vapor and Calculation of Apparent Surface Reflectance from Radiance Measured by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) Using a Radiative Transfer Code

The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) is an imaging spectrometer that measures spatial images of the total up welling spectral radiance from 400 to 2500 nm at 10 nm spectral intervals. Quantitiative research and application objectives for surface investigations require conversion of the measured radiance to surface reflectance or surface leaving radiance. In this paper we describe a set of algorithms to estimate aerosol optical depth, atmospheric water vapor, and surface pressure height from the AVIRIS measured radiance.

infrared↗

The impact of multi-sensor land data assimilation on river discharge estimation

River discharge is one of the most critical renewable water resources. Accurately estimating river discharge with land surface models (LSMs) remains challenging due to the difficulty in estimating land water storages such as snow, soil moisture, and groundwater. While data assimilation (DA) ingesting optical, microwave, and gravity measurements from space can help constrain theses storage states, its impacts on runoff and eventually river discharge are not fully understood. In this study, by taking advantage of recently published land DA results that jointly assimilate eight different combinations of observations from the Moderate Resolution Imaging Spectroradiometer (MODIS), Gravity Recovery and Climate Experiment (GRACE), and Advanced Microwave Scanning Radiometer for EOS (AMSR-E), we quantify to what degree multi-sensor land DA improves the river discharge simulation skills over 40 global river basins, and investigate the complementary strengths of different satellite measurements on river discharge. To be more specific, river discharge is updated by feeding gridded runoff from the eight multi-sensor DA simulations into a vector-based river routing model named the Routing Application for Parallel computatIon of Discharge (RAPID). Our modeling results, including 7-year simulations at 177,458 river reaches globally, are used to study the seasonal to interannual variability of river discharge. It is found that assimilating GRACE has the greatest impact on global runoff patterns, leading to the most pronounced improvements in spatial river discharge in the middle and high latitudes with the R 2 increased by 0.16. The seasonal variation of spatial discharge is most skillful during the boreal summer. However, our evaluation also shows model and DA still struggle to generate reasonable variability and averaged discharge over permafrost regions. Finally, by assessing how different satellites add value to discharge forecasts, this study paves the way for more advanced multi-sensor satellite data assimilation to predict the terrestrial hydrological cycle.

54 ENVIRONMENTAL SCIENCES↗

Estimating Vegetation Parameters from Interferometric and Polarimetric Radar Using Physical Scattering Models

Radar data from vegetated land surfaces depend on many structural and compositional parameters describing the terrain. Because early, noninterferometric radar systems usually constituted an insufficient observation set from which to estimate parameters of the terrain, statistical regression techniques were used which incorporated some level of apriori knowledge or field measurements. With the advent of radar interferometry and polarimetric interferometry, potentially at multiple baselines, the observation set is now approaching that required to quantitatively estimate the parameters describing a vegetated land surface. Quantitative estimation entails formulating a physical scattering model relating the radar observations to the vegetation and surface parameters on which they depend. This paper describes the physics of candidate scattering models, and shows how the models determine the estimable parameter set. It also indicates the measurement accuracy of parameters such as vegetation height, height-to-base-of-live-crown, and surface topography with multibaseline polarimetric interferometry.

Treuhaft, Robert N.↗

Comparison of cloud microphysical parameters derived from surface and satellite measurements during FIRE phase 2

Cloud microphysical properties are an important component in climate model parameterizations of water transport, cloud radiative exchange, and latent heat processes. Estimation of effective cloud particle size, liquid or ice water content, and optical depth from satellite-based instrumentation is needed to develop a climatology of cloud microphysical properties and to better understand and model cloud processes in atmospheric circulation. These parameters are estimated from two different surface data sets taken at Coffeyville, Kansas, during the First ISCCP Regional Experiment (FIRE) Phase-2 Intensive Field Observation (IFO) period (November 13 - December 7, 1991). Satellite data can also provide information about optical depth and effective particle size. This paper explores the combination of the FIRE-2 surface and satellite data to determine each of the cloud microphysical properties.

Young, David F.↗

Cloud model-based simulation of spaceborne radar observations

Simulations of observations from potential spaceborne radars are made based on storm structure generated from the three-dimensional (3D) Goddard cumulus ensemble model simulation of an intense overland convective system. Five frequencies of 3, 10, 14, 35, and 95 GHz are discussed, but the Tropical Rainfall Measuring Mission precipitation radar sensor frequency (14 GHz) is the focus of this study. Radar reflectives and their attenuation in various atmospheric conditions are studied in this simulation. With the attenuation from cloud and precipitation in the estimation of reflectivity factor (dBZ), the reflectivities in the lower atmosphere in the convective cores are significantly reduced. With spatial resolution of 4 km X 4 km, attenuation at 14 GHz may cause as large as a 20-dBZ difference between the simulated measurements of the peak, Z(sub mp) and near-surface reflectivity, Z(sub ms) in the most intense convective region. The Z(sub mp) occurs at various altitudes depending on the hydrometeor concentrations and their vertical distribution. Despite the significant attenuation in the intense cores, the presence of the rain maximum is easily detected by using information of Z(sub mp). In the stratiform region, the attenuation is quite limited (usually less than 5 dBZ), and the reduction of reflectivity is mostly related to the actual vertical structure of cloud distribution. Since Z(sub ms) suffers severe attenuation and tends to underestimate surface rainfall intensity in convective regions. Z(sub mp) can be more representative for rainfall retrieval in the lower atmosphere in these regions. In the stratiform region where attenuation is negligible, however, Z(sub mp) tends to overestimate surface rainfall and Z(sub ms) is more appropriate for rainfall retrieval. A hybrid technique using a weight between the two rain intensities is tested and found potentially usefull for future applications. The estimated surface rain-rate map based on this hybrid approach captures many of the details of the cloud model rain field but still slightly underestimates the rain-rate maximum.

Yeh, H.-Y. M.↗