Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Supportability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Self-Supported Branched Poly(ethylenimine) Monoliths from Inverse Template 3D Printing for Direct Air Capture

3D-printed inverse templates are combined with ice templating to develop self-supported branched poly(ethylenimine) monoliths with regular channels of varying channel density and ordered macropores. A maximum uptake of 0.96 mmol of CO 2 /g of monolith from ambient air containing 45.5% RH is achieved from dynamic breakthrough experiments, which is a 31% increase compared to the CO 2 uptake from adsorption under dry conditions for the same duration. The breakthrough experiments show characteristics of internal mass-transfer limitations. The cyclic dynamic breakthrough experiments indicate stable operation without significant loss in CO 2 uptake across eight cycles. Moreover, the self-supported monolith shows minimal loss in adsorption capacity (7.7%) upon exposure to air containing 21% oxygen at 110 °C, in comparison to a conventional sorbent consisting of poly(ethylenimine) impregnated on Al 2 O 3 (18.9%). The monoliths exhibit good mechanical stability, contributed by elastic deformation, corresponding to up to 74% strain and lower pressure drop compared to many existing monoliths in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alcohol-Induced Low-Temperature Blockage of Supported-Metal Catalysts for Enhanced Catalysis

The partial or complete blockage of active sites of metal nanoparticles (NPs) on supported-metal catalysts has been of interest for tuning the stability, selectivity, and rate of reactions. In this study, we show that Au-sites in Au/TiO 2 surprisingly become blocked upon treatment in common alcohols (2-propanol and methanol), with 2-propanol causing a greater extent of blockage. Nearly 95% of Au-sites are covered after treatment in 2-propanol at room temperature, followed by desorption at 150 °C. Infrared spectroscopy of CO adsorption unambiguously confirms the occurrence of this phenomenon. Electron energy loss spectroscopy (EELS), temperature-programmed desorption (TPD), Raman spectroscopy, and DFT simulations suggest that the formation of carbon deposits from 2-propanol decomposition and/or the migration of a TiO x layer over the supported NPs may be responsible for the blockage of Au-sites. Nearly full coverage of Au NPs after treatment in 2-propanol led to negligible activity for catalytic CO oxidation, whereas partial retraction of the overlayer led to enhanced activity with time-on-stream, suggesting a self-activating catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation Dynamics of Supported Catalytic Cu Clusters: Coupling to Fluxionality

Copper oxide nanoclusters have a wide range of catalytic applications, such as the selective oxidation of hydrocarbons. O 2 binding to the catalyst, activation, and release upon reagent oxidation are key events in these catalytic chemistries. Furthermore, these events are expected to be accompanied by significant structural changes of the Cu clusters, because O atoms integrate into the cluster, rather than bind to its surface. Topping the complexity of the problem, partially oxidized Cu clusters are known to exhibit strong fluxionality and feature diverse and interconverting structures and oxygen contents in conditions of oxidative dehydrogenation (ODH). Hence, a significant dynamic coupling between the “hot” O 2 molecule impacting the cluster at reaction temperatures and the cluster fluxionality can be expected. In this work, we focus on the dynamics of dioxygen integration into a partially oxidized Cu cluster supported on hydroxylated amorphous alumina–a system recently reported to be an exceptionally selective catalyst for cyclohexane ODH with very little CO produced, whose mechanistic underpinnings are of utmost interest. The statistics over a swarm of adsorption and scattering trajectories where O 2 hits various sites on the cluster at reaction temperature shows that the O 2 binding does not only follow the minimal energy paths. O 2 also rarely integrates into the cluster in a single step and instead first binds to a single Cu atom via either an η 1 -O 2 or an η 2 -O 2 mode. Surprisingly, this step often has a higher barrier than the subsequent O 2 integration and dissociation, which in turn take multiple steps and complete the oxidation process. Dynamic trajectories starting from the key transition state of integration of the adsorbed O 2 can also lead to different intermediate structures during or right after the dissociation, due to the energy released from the transition state and the thermal intracluster effects. From these activated O 2 chemisorbed structures, O 2 dissociation occurs with moderate barriers (~0.5 eV), producing multiple final oxidized Cu 4 O 4 states. Hence, a diversity of reaction profiles for the attack of supported Cu cluster by O 2 emerges due to the dynamic effects, with implications for mechanisms, kinetic models, and catalyst design principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into Dopant-Mediated Tuning of Silica-Supported Mo Metal Centers for Enhanced Olefin Metathesis

Here, we show that the electronic environment around active Mo centers supported on mesoporous silicates can be tuned by the addition of transition metals creating highly dispersed bimetallic catalysts that display enhanced activity for ethylene + 2-butene metathesis to propylene. The bimetallic catalysts are prepared by incorporating electrophilic Lewis acid metals (M) such as Nb, Ta, Zr, or Hf as dopant promoters into mesoporous KIT-6 supports using a one-pot sol–gel technique followed by impregnation of the Mo species. All the bimetallic Mo/M-KIT-6 catalysts display better activity than monometallic Mo/KIT-6 catalyst (28.7 ± 1.1 mmol (mol Mo s ) –1 ), with (Mo/Nb-KIT-6) catalysts exhibiting maximum propylene formation rates (54.2 ± 0.5 mmol (mol Mo s ) –1 ) at an identical Mo loading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Selectivity of Single-Site Supported Metal Catalysts with Ionic Liquids

1,3-Dialkylimidazolium ionic liquid coatings act as electron donors, increasing the selectivity for partial hydrogenation of 1,3-butadiene catalyzed by iridium complexes supported on high-surface-area γ-Al 2 O 3 . High-energy-resolution fluorescence detection X-ray absorption near-edge structure (HERFD XANES) measurements quantify the electron donation and are correlated with the catalytic activity and selectivity. Furthermore, the results demonstrate broad opportunities to tune electronic environments and catalytic properties of atomically dispersed supported metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous Silica Nanoparticle-Supported Lipid Bilayers (Protocells) for Active Targeting and Delivery to Individual Leukemia Cells

Many nanocarrier cancer therapeutics currently under development, as well as those used in the clinical setting, rely upon the enhanced permeability and retention (EPR) effect to passively accumulate in the tumor microenvironment and kill cancer cells. In leukemia, where leukemogenic stem cells and their progeny circulate within the peripheral blood or bone marrow, the EPR effect may not be operative. Thus, for leukemia therapeutics, it is essential to target and bind individual circulating cells. Here in this research, we investigate mesoporous silica nanoparticle (MSN)-supported lipid bilayers (protocells), an emerging class of nanocarriers, and establish the synthesis conditions and lipid bilayer composition needed to achieve highly monodisperse protocells that remain stable in complex media as assessed in vitro by dynamic light scattering and cryo-electron microscopy and ex ovo by direct imaging within a chick chorioallantoic membrane (CAM) model. We show that for vesicle fusion conditions where the lipid surface area exceeds the external surface area of the MSN and the ionic strength exceeds 20 mM, we form monosized protocells (polydispersity index <0.1) on MSN cores with varying size, shape, and pore size, whose conformal zwitterionic supported lipid bilayer confers excellent stability as judged by circulation in the CAM and minimal opsonization in vivo in a mouse model. Having established protocell formulations that are stable colloids, we further modified them with anti-EGFR antibodies as targeting agents and reverified their monodispersity and stability. Then, using intravital imaging in the CAM, we directly observed in real time the progression of selective targeting of individual leukemia cells (using the established REH leukemia cell line transduced with EGFR) and delivery of a model cargo. In conclusion, overall we have established the effectiveness of the protocell platform for individual cell targeting and delivery needed for leukemia and other disseminated disease.

60 APPLIED LIFE SCIENCES↗

Correlating Particle Size and Shape of Supported Ru/gamma-Al2O3 Catalysts with NH3 Decomposition Activity

While ammonia synthesis and decomposition on Ru are known to be structure-sensitive reactions, the effect of particle shape on controlling the particle size giving maximum turnover frequency (TOF) is not understood. By controlling the catalyst pretreatment conditions, we have varied the particle size and shape of supported Ru/{gamma}-Al{sub 2}O{sub 3} catalysts. The Ru particle shape was reconstructed by combining microscopy, chemisorption, and extended X-ray absorption fine structure (EXAFS) techniques. We show that the particle shape can change from a round one, for smaller particles, to an elongated, flat one, for larger particles, with suitable pretreatment. Density functional theory calculations suggest that the calcination most likely leads to planar structures. We show for the first time that the number of active (here B{sub 5}) sites is highly dependent on particle shape and increases with particle size up to 7 nm for flat nanoparticles. The maximum TOF (based on total exposed Ru atoms) and number of active (B{sub 5}) sites occur at 7 nm for elongated nanoparticles compared to at {approx}1.8-3 nm for hemispherical nanoparticles. A complete, first-principles based microkinetic model is constructed that can quantitatively describe for the first time the effect of varying particle size and shape on Ru activity and provide further support of the characterization results. In very small nanoparticles, particle size polydispersity (due to the presence of larger particles) appears to be responsible for the observed activity.

36 MATERIALS SCIENCE↗

Chemoselective Hydrogenation with Supported Organoplatinum(IV) Catalyst on Zn(II)-Modified Silica

For this research, well-defined organoplatinum(IV) sites were grafted on a Zn(II)-modified SiO 2 support via surface organometallic chemistry in toluene at room temperature. Solid-state spectroscopies including XAS, DRIFTS, DRUV–vis, and solid-state (SS) NMR enhanced by dynamic nuclear polarization (DNP), as well as TPR-H 2 and TEM techniques revealed highly dispersed (methylcyclopentadienyl)methylplatinum(IV) sites on the surface ((MeCp)PtMe/Zn/SiO 2 , 1). In addition, computational modeling suggests that the surface reaction of (MeCp)PtMe 3 with Zn(II)-modified SiO 2 support is thermodynamically favorable (ΔG = -12.4 kcal/mol), likely due to the increased acidity of the hydroxyl group, as indicated by NH 3 -TPD and DNP-enhanced 17 O{ 1 H} SSNMR. In situ DRIFTS and XAS hydrogenation experiments reveal the probable formation of a surface Pt(IV)-H upon hydrogenolysis of Pt-Me groups. The heterogenized organoplatinum(IV)-hydride sites catalyze the selective partial hydrogenation of 1,3-butadiene to butenes (up to 95%) and the reduction of nitrobenzene derivatives to anilines (up to 99%) with excellent tolerance of reduction-sensitive functional groups (olefin, carbonyl, nitrile, halogens) under mild reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of pH in the formation of structurally stable and catalytically active supported gold catalysts

We report the investigation of titania (Degussa P25) supported gold catalysts prepared by magnetron sputtering. Catalysts grown on natural fumed titania were structurally unstable, resulting in the rapid coarsening of 2.4 nm gold clusters into large {approx}20 nm gold clusters in a few days at room temperature under normal atmospheric conditions. However, treating the titania support powder to a mock deposition-precipitation process, at pH 4, followed by the subsequent deposition of gold onto this treated powder produced a remarkable enhancement in gold particle stability and a 20-fold enhancement of catalytic activity. Furthermore, it was found that treating the titania under basic conditions (pH 10) resulted in a further enhancement of structural stability and a further doubling of the reaction rate to 0.28 mol of CO/mol of Au {center_dot} s. This enhancement cannot be attributed to removing surface Cl{sup -} species from the titania, the formation of oxygen vacancies on the TiO{sub 2} surface, or an electronic effect. Instead, it appears to be associated with the formation of strongly bound hydroxyl species on the TiO{sub 2} surface. The formation of surface hydroxyls during the deposition-precipitation method is coincidental and contributes significantly to the properties of Au/TiO{sub 2} catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled site coverage of strong metal–support interaction (SMSI) on Pd NP catalysts

Here, strong metal–support interaction catalysts have been shown to improve desired product selectivity at the cost of fractional rates due to active site coverage. The goal of this study was to determine if the active site coverage of metallic nanoparticles could be controlled to lower levels than have been previously reported in SMSI catalysts with the aim of improving the rate while maintaining high selectivity. 2Pd–XTi/SiO 2 (2 wt% Pd, X wt% Ti) strong metal–support interaction (SMSI) catalysts with Ti loadings between 0–1.0 wt% were synthesized to control Pd nanoparticle coverage. Calcination at 450 °C and reduction at 550 °C were sufficient for forming ~2 nm sized Pd particles in all catalysts. Increasing the Ti loading from 0.1 to 1.0 wt% increased the surface coverage from 40 to 85% at a fixed reduction temperature of 550 °C. The IR spectra of the SMSI catalysts were similar with a high fraction of linear bonded CO which was much higher than that of Pd nanoparticles of similar size. The SMSI overlayer could be removed by oxidation at 350 °C and re-reduction at 200 °C. EXAFS of the oxidized catalysts indicates that nearly full oxidation of the metallic nanoparticle was required to remove the SMSI overlayer. Oxidation temperatures from 30 to 300 °C partially oxidized the Pd nanoparticles and subsequent re-reduction at 200 °C partially decreases the SMSI coverage. The fractional surface coverage was determined by measuring the rate of propylene hydrogenation with and without the SMSI overlayer. Increasing the reduction temperature from 200 to 550 °C increased the SMSI coverage from 0 to 85% depending on the Ti loading and temperature. In conclusion, after reduction at 550 °C and oxidation at 350 °C, the range of coverages varied between ~10% with 0.1 wt% Ti after re-reduction at 300 °C and ~85% with 1 wt% Ti after reduction at 550 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unveiling the support effect in Pt-based catalysts for the selective catalytic oxidation of NH 3 under realistic diesel engine conditions

Pt catalysts have been widely used for the selective catalytic oxidation of NH 3 (NH 3 -SCO) in practical applications due to their high activity at low temperatures. However, more stringent regulations require further enhancement of low-temperature NH 3 -SCO activity. In this study, we investigated the influence of different supports, including aluminum oxide (Al 2 O 3 ), silica (SiO 2 ), and chabazite (CHA), on the NH 3 -SCO performance of Pt catalysts. Furthermore, our findings demonstrate that the Pt/CHA catalyst exhibited superior NH 3 -SCO performance under realistic diesel engine conditions, characterized by high space velocity and the presence of water vapor. Notably, the Pt/CHA catalyst achieved a significantly lower T 50 (temperature at which 50% NH 3 conversion is achieved) of 218 °C under conditions with both CO 2 and H 2 O, with a 56 °C reduction compared to the state-of-the-art Pt/Al 2 O 3 catalyst. The exceptional NH 3 -SCO performance is attributed to the high abundance of metallic Pt 0 species and the presence of rich and stable acid sites that facilitate NH 3 adsorption and activation. Furthermore, these results highlight CHA as a promising support for the Pt catalyst in NH 3 -SCO applications for diesel engine emission control.

36 MATERIALS SCIENCE↗

Graphene as a transparent conductive support for studying biological molecules by transmission electron microscopy

We demonstrate the application of graphene as a support for imaging individual biological molecules in transmission electron microscope (TEM). A simple procedure to produce free-standing graphene membranes has been designed. Such membranes are extremely robust and can support practically any submicrometer object. Tobacco mosaic virus has been deposited on graphene samples and observed in a TEM. High contrast has been achieved even though no staining has been applied.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Generation and reactivity of putative support systems, Ce-Al neutral binary oxide nanoclusters: CO oxidation and C–H bond activation

Both ceria (CeO{sub 2}) and alumina (Al{sub 2}O{sub 3}) are very important catalyst support materials. Neutral binary oxide nanoclusters (NBONCs), Ce{sub x}Al{sub y}O{sub z}, are generated and detected in the gas phase and their reactivity with carbon monoxide (CO) and butane (C{sub 4}H{sub 10}) is studied. The very active species CeAlO{sub 4}{sup •} can react with CO and butane via O atom transfer (OAT) and H atom transfer (HAT), respectively. Other Ce{sub x}Al{sub y}O{sub z} NBONCs do not show reactivities toward CO and C{sub 4}H{sub 10}. The structures, as well as the reactivities, of Ce{sub x}Al{sub y}O{sub z} NBONCs are studied theoretically employing density functional theory (DFT) calculations. The ground state CeAlO{sub 4}{sup •} NBONC possesses a kite-shaped structure with an O{sub t}CeO{sub b}O{sub b}AlO{sub t} configuration (O{sub t}, terminal oxygen; O{sub b}, bridging oxygen). An unpaired electron is localized on the O{sub t} atom of the AlO{sub t} moiety rather than the CeO{sub t} moiety: this O{sub t} centered radical moiety plays a very important role for the reactivity of the CeAlO{sub 4}{sup •} NBONC. The reactivities of Ce{sub 2}O{sub 4}, CeAlO{sub 4}{sup •}, and Al{sub 2}O{sub 4} toward CO are compared, emphasizing the importance of a spin-localized terminal oxygen for these reactions. Intramolecular charge distributions do not appear to play a role in the reactivities of these neutral clusters, but could be important for charged isoelectronic BONCs. DFT studies show that the reaction of CeAlO{sub 4}{sup •} with C{sub 4}H{sub 10} to form the CeAlO{sub 4}H•C{sub 4}H{sub 9}{sup •} encounter complex is barrierless. While HAT processes have been previously characterized for cationic and anionic oxide clusters, the reported study is the first observation of a HAT process supported by a ground state neutral oxide cluster. Mechanisms for catalytic oxidation of CO over surfaces of Al{sub x}O{sub y}/M{sub m}O{sub n} or M{sub m}O{sub n}/Al{sub x}O{sub y} materials are proposed consistent with the presented experimental and theoretical results.

2-METHYLPROPANE↗

Rendering graphene supports hydrophilic with non-covalent aromatic functionalization for transmission electron microscopy

Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated samples for transmission electron microscopy (TEM), either in retaining protein concentration, providing mechanical stability or dissipating sample charge. However, strong background signal from the amorphous carbon support obstructs that of the sample, and the insulating properties of thin amorphous carbon films preclude any efficiency in dispersing charge. Graphene addresses the limitations of amorphous carbon. Graphene is a crystalline material with virtually no phase or amplitude contrast and unparalleled, high electrical carrier mobility. However, the hydrophobic properties of graphene have prevented its routine application in Cryo-TEM. This Letter reports a method for rendering graphene TEM supports hydrophilic—a convenient approach maintaining graphene's structural and electrical properties based on non-covalent, aromatic functionalization.

36 MATERIALS SCIENCE↗

A supported liquid membrane system for the selective recovery of rare earth elements from neodymium-based permanent magnets

We present that the rare earth elements (REEs) play a vital role in the development of green energy and high-tech industries. In order to meet the fast-growing demand and to ensure sufficient supply of the REEs, it is essential to develop an efficient REE recovery process from post-consumer REE-containing products. In this research effort, we have developed a supported liquid membrane system utilizing polymeric hollow fiber modules to extract REEs from neodymium-based magnets with neutral extractants such as tetraoctyl digylcol amide (TODGA). The effect of process variables such as REE concentration, molar concentration of acid, and membrane area on REE recovery was investigated. We have demonstrated the selective extraction and recovery of REEs such as Nd, Pr, and Dy without co-extraction of non-REEs from permanent NdFeB magnets through the supported liquid membrane system. The extracted REEs were then recovered by precipitation followed by the annealing step to obtain crystalline REE powders in nearly pure form. Finally, the recovered REE oxides were characterized by X-ray diffraction, scanning electron microscope coupled with energy-dispersive X-ray spectroscopy, and inductively coupled plasma–optical emission spectroscopy.

36 MATERIALS SCIENCE↗

Synthesis and Spin Trapping Properties of Polystyrene Supported Trifluoromethylated Cyclic Nitrones

Polystyrene supported fluorinated cyclic nitrone spin-traps (Resin-2-HFDMPO and Resin-2-PFDMPO) containing a trifluoromethyl pyrroline-N-oxide core were developed to detect free radicals under flow conditions. A continuous flow EPR technique was used to evaluate the spin trapping properties of these tethered nitrones. While both resins trapped radicals, polymer supported nitrone Resin-2PFDMPO with a longer and more flexible linker showed a more information rich spectrum than Resin-2-HFDMPO.

Nitrone, fluorinated, polymer supported, spin trap↗

First considerations on the supporting structures of FCC-ee booster and collider in the arc regions

In 2022, the FCC Feasibility Study management mandated a working group to analyse the best configuration of the FCC-ee tunnel in the arc regions, in view of the construction of a mock-up of the arc half-cell. One of the main and most challenging goals of the study, named FCC-ee Arc Half-Cell Mock-up Project, was to perform a preliminary investigation on the principles of supporting the Short-Straight Sections and dipoles of the half-cells, both for the booster and for the collider machines. This is an important input needed for the choice of the best configuration of the relative placement of the booster with respect to the collider. The structural stiffness, mass and stability of the supporting structures must be optimized to minimize the vibrations transmitted/transferred to the magnetic system of the accelerators by elements such as pumps, water cooling system, beam thermomechanical stresses, powering elements, etc. To perform the study, tools such as CAD software, FEM and analytical techniques were employed. This paper summarizes the preliminary design concepts and the results of the simulations performed.

Accelerator Subsystems and Technologies↗

Anticipatory Monitoring and Control of Complex Systems using a Fuzzy based Fusion of Support Vector Regressors

This paper places itself in the realm of anticipatory systems and envisions monitoring and control methods being capable of making predictions over system critical parameters. Anticipatory systems allow intelligent control of complex systems by predicting their future state. In the current work, an intelligent model aimed at implementing anticipatory monitoring and control in energy industry is presented and tested. More particularly, a set of support vector regressors (SVRs) are trained using both historical and observed data. The trained SVRs are used to predict the future value of the system based on current operational system parameter. The predicted values are then inputted to a fuzzy logic based module where the values are fused to obtain a single value, i.e., final system output prediction. The methodology is tested on real turbine degradation datasets. The outcome of the approach presented in this paper highlights the superiority over single support vector regressors. In addition, it is shown that appropriate selection of fuzzy sets and fuzzy rules plays an important role in improving system performance.

47 OTHER INSTRUMENTATION↗