Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Smoke”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Thrust-reverser flow investigation on a twin-engine transport

An investigation was conducted in the NASA Langley 14 x 22 foot Subsonic Tunnel to study the effects of engine thrust reversing on an aft-mounted twin-engine transport and to develop effective testing techniques. Testing was done over a fixed and a moving-belt ground plane and over a pressure instrumented ground board. Free-stream dynamic pressure was set at values up to 12.2 psf, which corresponded to a maximum Reynolds number based on the mean aerodynamic chord of 765,000. The thrust reversers examined included cascade, target and four-door configurations. The investigation focused on the range of free-stream velocities and engine thrust-reverser flow rates that would be typical for landing ground-roll conditions. Flow visualization techniques were investigated, and the use of water or smoke injected into the reverser flow proved effective to determine the forward progression of the reversed flow and reingestion limits. When testing over a moving-belt ground plane, as opposed to a fixed ground plane, forward penetration of the reversed flow was reduced. The use of a pressure-instrumented ground board enabled reversed flow ground velocities to be obtained, and it provided a means by which to identify the reversed flow impingement point on the ground.

Gatlin, Gregory M.↗

The effect of insulated combustion chamber surfaces on direct-injected diesel engine performance, emissions, and combustion

The combustion chamber of a single-cylinder, direct-injected diesel engine was insulated with ceramic coatings to determine the effect of low heat rejection (LHR) operation on engine performance, emissions, and combustion. In comparison to the baseline cooled engine, the LHR engine had lower thermal efficiency, with higher smoke, particulate, and full load carbon monoxide emissions. The unburned hydrocarbon emissions were reduced across the load range. The nitrous oxide emissions increased at some part-load conditions and were reduced slightly at full loads. The poor LHR engine performance was attributed to degraded combustion characterized by less premixed burning, lower heat release rates, and longer combustion duration compared to the baseline cooled engine.

Dickey, Daniel W.↗

Assessment, development, and application of combustor aerothermal models

The gas turbine combustion system design and development effort is an engineering exercise to obtain an acceptable solution to the conflicting design trade-offs between: combustion efficiency, gaseous emissions, smoke, ignition, restart, lean blowout, burner exit temperature quality, structural durability, and life cycle cost. For many years, these combustor design trade-offs have been carried out with the help of fundamental reasoning and extensive component and bench testing, backed by empirical and experience correlations. Recent advances in the capability of computational fluid dynamics (CFD) codes have led to their application to complex three-dimensional flows such as those in the gas turbine combustor. A number of U.S. Govern- ment and industry sponsored programs have made significant contributions to the formulation, development, and verification of an analytical combustor design methodology which will better define the aerothermal loads in a combustor, and be a valuable tool for design of future combustion systems. The contributions made by NASA Hot Section Technology (HOST) sponsored Aero- thermal Modeling and supporting programs are described in this paper

J D Holdeman↗

Multi-year global climatic effects of atmospheric dust from large bolide impacts

The global climatic effects of dust generated by the impact of a 10 km-diameter bolide was simulated using a one-dimensional (vertical only) globally-averaged climate model by Pollack et al. The goal of the simulation is to examine the regional climate effects, including the possibility of coastal refugia, generated by a global dust cloud in a model having realistic geographic resolution. The climate model assumes the instantaneous appearance of a global stratospheric dust cloud with initial optical depth of 10,000. The time history of optical depth decreases according to the detailed calculations of Pollack et al., reaching an optical depth of unity at day 160, and subsequently decreasing with an e-folding time of 1 year. The simulation is carried out for three years in order to examine the atmospheric effects and recovery over several seasons. The simulation does not include any effects of NOx, CO2, or wildfire smoke injections that may accompany the creation of the dust cloud. The global distribution of surface temperature changes, freezing events, precipitation and soil moisture effects and sea ice increases will be discussed.

Thompson, Starley L.↗

Acute effects of a large bolide impact simulated by a global atmospheric circulation model

The goal is to use a global three-dimensional atmospheric circulation model developed for studies of atmospheric effects of nuclear war to examine the time evolution of atmospheric effects from a large bolide impact. The model allows for dust and NOx injection, atmospheric transport by winds, removal by precipitation, radiative transfer effects, stratospheric ozone chemistry, and nitric acid formation and deposition on a simulated Earth having realistic geography. Researchers assume a modest 2 km-diameter impactor of the type that could have formed the 32 km-diameter impact structure found near Manson, Iowa and dated at roughly 66 Ma. Such an impact would have created on the order of 5 x 10 to the 10th power metric tons of atmospheric dust (about 0.01 g cm(-2) if spread globally) and 1 x 10 to the 37th power molecules of NO, or two orders of magnitude more stratospheric NO than might be produced in a large nuclear war. Researchers ignore potential injections of CO2 and wildfire smoke, and assume the direct heating of the atmosphere by impact ejecta on a regional scale is not large compared to absorption of solar energy by dust. Researchers assume an impact site at 45 N in the interior of present day North America.

Thompson, Starley L.↗

Middle atmosphere electrical energy coupling

The middle atmosphere (MA) has long been known as an absorber of radio waves, and as a region of nonlinear interactions among waves. The region of highest transverse conductivity near the top of the MA provides a common return for global thunderstorm, auroral Birkeland, and ionospheric dynamo currents, with possibilities for coupling among them. Their associated fields and other transverse fields map to lower altitudes depending on scale size. Evidence now exists for motion-driven aerosol generators, and for charge trapped at the base of magnetic field lines, both capable of producing large MA electric fields. Ionospheric Maxwell currents (curl H) parallel to the magnetic field appear to map to lower altitudes, with rapidly time-varying components appearing as displacement currents in the stratosphere. Lightning couples a (primarily ELF and ULF) current transient to the ionosphere and magnetosphere whose wave shape is largely dependent on the MA conductivity profile. Electrical energy is of direct significance mainly in the upper MA, but electrodynamic transport of minor constituents such as smoke particles or CN may be important at other altitudes.

Hale, L. C.↗

Lunar and Planetary Science Conference, 18th, Houston, TX, Mar. 16-20, 1987, Proceedings

Papers on lunar and planetary science are presented, including petrogenesis and chemistry of lunar samples, geology and petrogenesis of the Apollo 15 landing site, lunar geology and applications, cratering records and cratering effects, differentiated meteorites, chondritic meteorites and asteroids, extraterrestrial grains, Venus, Mars, and icy satellites. The importance of lunar granite and KREEP in very high potassium basalt petrogenesis, indentifying parent plutonic rocks from lunar breccia and soil fragments, glasses in ancient and young Apollo 16 regolith breccias, the formation of the Imbrium basin, the chemistry and petrology of the Apennine Front, lunar mare ridges, studies of Rima Mozart, electromagnetic energy applications in lunar resource mining and construction, detecting a periodic signal in the terrestrial cratering record, and a search for water on the moon, are among the topics discussed. Other topics include the bidirectional reflectance properties of Fe-Ni meteorites, the nature and origin of C-rich ordinary chondrites and chondritic clasts, the dehydration kinetics of shocked serpentine, characteristics of Greenland Fe/Ni cosmic grains, electron microscopy of a hydrated interplanetary dust particle, trapping Ne, Ar, Kr, and Xe in Si2O3 smokes, gossans on Mars, and a model of the porous structure of icy satellites.

Ryder, Graham↗

Development of an analytical model to assess fuel property effects on combustor performance

A generalized first-order computer model has been developed in order to analytically evaluate the potential effect of alternative fuels' effects on gas turbine combustors. The model assesses the size, configuration, combustion reliability, and durability of the combustors required to meet performance and emission standards while operating on a broad range of fuels. Predictions predicated on combustor flow-field determinations by the model indicate that fuel chemistry, as defined by hydrogen content, exerts a significant influence on flame retardation, liner wall temperature, and smoke emission.

Sutton, R. D.↗

Analysis of in-flight winds for shuttle Mission STS 51-L

Television photos of smoke plumes are analyzed to estimate meridional wind shear on the space shuttle Challenger associated with the accident of Mission 51-L. Gust velocities were obtained by detailed examination of the debris trails. The shuttle exhaust trail was used to establish altitudes of significant features in the photographs. Wind data obtained from the photographs compare favorably with data obtained from a rawinsonde released 9 min after the launch of the shuttle.

Fichtl, George H.↗

Analysis and visualization of complex unsteady three-dimensional flows

Flow field animation is the natural choice as a tool in the analysis of the numerical simulations of complex unsteady three-dimensional flows. The PLOT4D extension of the widely used PLOT3D code to allow the interactive animation of a broad range of flow variables was developed and is presented. To allow direct comparison with unsteady experimental smoke and dye flow visualization, the code STREAKER was developed to produce time accurate streaklines. Considerations regarding the development of PLOT4D and STREAKER, and example results are presented.

Van Dalsem, William R.↗

Low speed wind tunnel investigation of the flow about delta wing, oscillating in pitch to very high angle of attack

Six-component airload histories were obtained for models of aspect ratio 1, 1.5, and 2. Examples are given from data obtained over a range of 'reduced frequency' parameters from 0.01 to 0.08. They include the unsteady response of the leading-edge vortices, as evidenced both by the time-dependent airloads and motion pictures of smoke released from the leading edge and illuminated by a thin sheet of laser light.

Jarrah, Mohammad-Ameen M.↗

Merging of aircraft vortex trails - Similarities to magnetic field merging

This paper discusses the phenomenological and formal similarities between the merging of aircraft vortex trails and the merging of magnetic field lines in a plasma. High-resolution photographs are shown of smoke trails from the wing tips of an airplane. These photographs show that the two vortex trails merge together downstream of the aircraft in a way similar to the merging of oppositely directed magnetic field lines in a plasma. Although there are some differences, this correspondence is apparently related to the fact that the vorticity equation in a fluid has the same mathematical form as the magnetic field equation in an MHD plasma. In both cases the merging proceeds at a rate considerably faster than would be predicted from classical estimates of the viscosity and resistivity. The enhanced merging rate in the fluid case appears to result from turbulence that increases the diffusion rate in the merging region.

Gurnett, Donald A.↗

Trace gas emissions from chaparral and boreal forest fires

Using smoke samples collected during low-level helicopter flights, the mixing ratios of CO2, CO, CH4, total nonmethane hydrocarbons, H2, and N2O over burning chaparral in southern California and over a burning boreal forest site in northern Ontario, Canada, were determined. Carbon dioxide-normalized emission ratios were determined for each trace gas for conditions of flaming, mixed, and smoldering combustion. The emission ratios for these trace gases were found to be highest for the smoldering combustion, generally thought to be the least efficient combustion stage. However, high emission ratios for these gases could be also produced during very vigorous flaming combustion.

Cofer, Wesley R., III↗

Earth observations during Space Shuttle flight STS-26: Discovery's mission to earth - September 29-October 3, 1988

During the late September-early October, 1988 flight of the Space Shuttle Discovery, astronauts took 1505 photographs of earth using handheld cameras. The resulting pictures provide an overview, not available from any other source, of dynamic environmental phenomena on five continents. The Discovery photographs show that: (1) atmospheric clarity has improved in the Northern Hemisphere, (2) widespread burning of natural vegetation throughout the Southern Hemisphere continues to generate immense smoke palls and extensive sedimentation in rivers and estuaries, and (3) although the drought in Africa was partially relieved by heavy rains in autumn, 1988, Lakes Chad and Nasser are at the lowest levels ever seen from space.

Wood, C. A.↗

Feasibility study of vortex interaction control on a chine forebody/delta wing configuration at high angles of attack

The feasibility of controlling vortex interactions or merger on a blended chine forebody and delta wing configuration was experimentally investigated. Low-speed wind tunnel diagnostics using smoke visualizations and wing upper-surface pressure measurements were performed on a generic 60 deg delta and chine forebody model, to assess chine modifications and leading edge flaps. Both techniques were shown to promote uncoupled vortex flows at high angles of attack and sideslip, with significant influence on the wing flow field, indicating potential for alleviating adverse high-alpha characteristics of blended chine swept wing configurations.

Rao, Dhanvada M.↗

Stratified charge rotary engine - Internal flow studies at the MSU engine research laboratory

High-speed visualization and laser Doppler velocimetry (LDV) systems consisting of a 40-watt copper vapor laser, mirrors, cylindrical lenses, a high speed camera, a synchronization timing system, and a particle generator were developed for the study of the fuel spray-air mixing flow characteristics within the combustion chamber of a motored rotary engine. The laser beam is focused down to a sheet approximately 1 mm thick, passing through the combustion chamber and illuminates smoke particles entrained in the intake air. The light scattered off the particles is recorded by a high speed rotating prism camera. Movies are made showing the air flow within the combustion chamber. The results of a movie showing the development of a high-speed (100 Hz) high-pressure (68.94 MPa, 10,000 psi) fuel jet are also discussed. The visualization system is synchronized so that a pulse generated by the camera triggers the laser's thyratron.

Hamady, F.↗

Flammabilities Of Graphite-Reinforced Composites

Report describes tests and comparisons of flammabilities, thermal properties, and selected mechanical properties of composite materials made of epoxy and other matrices reinforced by graphite fibers. Composites also compared with baseline epoxy/fiberglass composite. Considers such properties as limiting oxygen index, smoke evolution, products of thermal degradation, total heat release, heat-release rate, loss of mass, spread of flames, resistance to ignition, and thermal stability.

Kourtides, Demetrius A.↗

Imaging Antenna Structure For Submillimeter Wavelengths

Integrated-circuit antenna structure contains two-dimensional array of antennas and antenna reflectors. In receiving mode, each antenna acts as part of detector for one picture element in millimeter- or submillimeter-wavelength imaging radar system. Millimeter-wave imaging system used to view objects through fog, smoke, or smog with resolution intermediate between microwave and visible-light imaging systems. Antenna elements, supports, and reflectors made by integrated-circuit techniques. Structures fabricated on front and back substrates separately. Substrates then joined. Inexpensive way to provide large number of small antenna elements required for imaging, all mounted rigidly in way that does not degrade operation.

Rebeiz, G.↗