Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Pairing and Short-Range Correlations in Nuclear Systems

The structure and density dependence of the pairing gap in infinite matter is relevant for astrophysical phenomena and provides a starting point for the discussion of pairing properties in nuclear structure. Short-range correlations can significantly deplete the available single-particle strength around the Fermi surface and thus provide a reduction mechanism of the pairing gap. Here, we study this effect in the singlet and triplet channels of both neutron matter and symmetric nuclear matter. Our calculations use phase-shift equivalent interactions and chiral two-body and three-body interactions as a starting point. We find an unambiguous reduction of the gap in all channels with very small dependence on the NN force in the singlet neutron matter and the triplet nuclear matter channel. In the latter channel, SRC alone provide a 50% reduction of the pairing gap.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of Short Central PEO Segment on Hydrolytic and Enzymatic Degradation of Triblock PCL Copolymers

Hydrolytic, enzymatic degradation and composting under controlled conditions of series of triblock PCL/PEO copolymers, PCEC, with central short PEO block (M{sub n} 400 g/mol) are presented and compared with homopolymer (PCL). The PCEC copolymers, synthesized via ring-opening polymerization of ε-caprolactone, were characterized by {sup 1}H NMR, quantitative {sup 13}C NMR, GPC, DSC and WAXS. The introduction of the PEO central segment (< 2 wt%) in PCL chains significantly affected thermal degradation and crystallization behavior, while the hydrophobicity was slightly reduced as confirmed by water absorption and moisture uptake experiments. Hydrolytic degradation studies in phosphate buffer after 8 weeks indicated a small weight loss, while FTIR analysis detected changes in crystallinity indexes and GPC measurements revealed bulk degradation. Enzymatic degradation tested by cell-free extracts containing Pseudomonas aeruginosa PAO1 confirmed high enzyme activity throughout the surface causing morphological changes detected by optical microscopy and AFM analysis. The changes in roughness of polymer films revealed surface erosion mechanism of enzymatic degradation. Copolymer with the highest content of PEO segment and the lowest molecular weight showed better degradation ability compared to PCL and other copolymers. Furthermore, composting of polymer films in a model compost system at 37 °C resulted in significant degradation of the all synthesized block copolymers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Hydrothermal Aging on Injection Molded Short Jute Fiber Reinforced Poly(Lactic Acid) (PLA) Composites

This work focused on the durability of short jute fiber reinforced poly(lactic acid) (PLA) composites in distilled water at different temperatures (23, 37.8 and 60 °C). Morphological, thermal and mechanical properties (tensile, flexural, and impact) of jute/PLA composites were investigated before and after aging. Different from traditional synthetic fiber reinforced polymer composites, the stability of jute/PLA composites in water was significantly influenced by hydrothermal temperature. The mechanical properties of the composites and molecular weight of PLA matrix declined quickly at 60 °C, however, this process was quite slower at temperatures of 23 and 37.8 °C. Impact properties of the composites were hardly decreased, but the tensile and flexural properties suffered a drop though to various degrees with three degradation stages at 23 and 37.8 °C. The poor interface of composites and the degradation of PLA matrix were the main damage mechanism induced by hydrothermal aging. Furthermore, considering the hydrolysis of PLA matrix, the cleavage of PLA molecular chain in different aging time was quantitatively investigated for the first time to illustrate hydrolysis degree of PLA matrix at different aging time.

36 MATERIALS SCIENCE↗

Ex Situ Spark Plasma Sintering of Short Powder-in-Tube MgB{sub 2} Tapes with Open and Closed Ends

Short powder-in-tube tapes of MgB{sub 2} in the Fe sheath were fabricated by ex situ route from a commercial powder containing some free Mg and MgO impurity phases. The final heat treatment was performed by spark plasma sintering (SPS). Tapes were with open (OT) or closed (CT) endings. Closed endings were made by folding and pressing. The MgB{sub 2} core of the OT sample has shown a higher low-field critical current density, a higher maximum pinning force, a slightly higher disorder, smaller average MgB{sub 2} crystallite size, a weak contact between Fe and MgB{sub 2} core, and more macro-flux jumps. The upper and irreversibility fields were similar for OT and CT samples. In the center of the MgB{sub 2} cores, the detected impurity phase is MgO, while at the interface with Fe, MgB{sub 4} also occurs. Impurity phases found at interface, MgO and MgB{sub 4}, are present in the center of the bulk SPSed samples. Reactions and pinning-force-related parameters are discussed with respect to Mg behavior influenced by condition of endings. It is inferred that the presence of free Mg in the raw MgB{sub 2} powder has an important contribution to observed differences, and its removal or control is recommended.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Short Note on Superconductivity at Ambient Temperature and Pressure in Silver-Embedded Gold Nano-particles: a Goldsmith Job Ahead

Very recent observation of superconductivity (arXiv: 1807.08572 ) in both transport (resistance versus temperature) and magnetization (zero field cooled) at around 235 K and above has obviously raised many eyebrows. The experimentalists in particular are more thrilled than the theoreticians. Although the results presented in the paper are clean and both transport and magnetization measurements do approve the observation of superconductivity to some extent (the diamagnetic shielding fraction is low), the problem is to synthesize/fabricate the material. This I called the “goldsmith” job, primarily because one has to deal with gold and silver nano-particle combination/amalgamation/alloying or even who knows the interfacial new phase, which could be superconducting. This short note is written to let the spark continues, and the interesting work of Thapa and Pandey (arXiv: 1807.08572 ) is reproduced independently.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Short Note on the Scaling Function Constant Problem in the Two-Dimensional Ising Model

We provide a simple derivation of the constant factor in the short-distance asymptotics of the tau-function associated with the 2-point function of the two-dimensional Ising model. This factor was first computed by Tracy (Commun Math Phys 142:297–311, 1991) via an exponential series expansion of the correlation function. Further simplifications in the analysis are due to Tracy and Widom (Commun Math Phys 190:697–721, 1998) using Fredholm determinant representations of the correlation function and Wiener–Hopf approximation results for the underlying resolvent operator. Our method relies on an action integral representation of the tau-function and asymptotic results for the underlying Painlevé-III transcendent from McCoy et al. (J Math Phys 18:1058–1092, 1977).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On Justification of the Asymptotics of Eigenfunctions of the Absolutely Continuous Spectrum in the Problem of Three One-Dimensional Short-Range Quantum Particles with Repulsion

The present paper offers a new approach to the construction of the coordinate asymptotics of the kernel of the resolvent of the Schrödinger operator in the scattering problem of three onedimensional quantum particles with short-range pair potentials. Within the framework of this approach, the asymptotics of eigenfunctions of the absolutely continuous spectrum of the Schrödinger operator can be constructed. In the paper, the possibility of a generalization of the suggested approach to the case of the scattering problem of N particles with arbitrary masses is discussed.

97 MATHEMATICS AND COMPUTING↗

Short-lived fission product measurements from >0.1 MeV neutron-induced fission using boron carbide.

A boron carbide shield was designed, custom fabricated, and used to create a fast fission energy neutron spectrum. The fissionable isotopes 233, 235, 238U, 237Np, and 239Pu were separately placed inside of this shield and irradiated under pulsed conditions at the Washington State University 1 MW TRIGA reactor. A unique set of fission product gamma spectra were collected at short times (4 minutes to 1 week) post-fission. Gamma spectra were collected on single-crystal high purity germanium detectors and on Pacific Northwest National Laboratory's (PNNL's) Direct Simultaneous Measurement (DSM) system composed of HPGe detectors connected in coincidence. This work defines the experimental methods used to produce and collect the gamma data, and demonstrates the validity of the measurements. It is important to fully document this information so the data can be used with high confidence for the advancement of nuclear science and non-proliferation applications. The gamma spectra collected in these and other experiments will be made publicly available at https://spcollab.pnl.gov/sites/gammadata or via the link at http://rdnsgroup.pnl.gov. A revised version of this publication will be posted with the data to make the experimental details available to those using the data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cumulative fission yields of short-lived isotopes under natural-abundance-boron-carbide-moderated neutron spectrum

The availability of gamma spectroscopy data on samples containing mixed fission products at short times after irradiation is limited. Due to this limitation, data interpretation methods for gamma spectra of mixed fission product samples, where the individual fission products have not been chemically isolated from interferences, are not well-developed. The limitation is particularly pronounced for fast pooled neutron spectra because of the lack of available fast reactors in the United States. Samples containing the actinide isotopes 233, 235, 238U, 237Np, and 239Pu individually were subjected to a 2$ pulse in the Washington State University 1 MW TRIGA reactor. To achieve a fission-energy neutron spectrum, the spectrum was tailored using a natural abundance boron carbide capsule to absorb neutrons in the thermal and epithermal region of the spectrum. Our tailored neutron spectrum is unique to the WSU reactor facility, consisting of a soft fission spectrum that contains some measurable flux in the resonance region. This results in a neutron spectrum at greater than 0.1 keV with an average energy of 70 keV, similar to fast reactor spectra and approaching that of 235U fission. Unique fission product gamma spectra were collected from 4 minutes to 1 week after fission using single-crystal high purity germanium detectors. Cumulative fission product yields measured in the current work generally agree with published fast pooled fission product yield values from ENDF/B-VII, though a bias was noted for 239Pu. The present work contributes to the compilation of energy-resolved fission product yield nuclear data for nuclear forensic purposes.

Finn, Erin C.↗

Ultra-short and broadband polarization splitter based on PCF and metal surface plasmons resonance

An ultra-short and broadband polarization splitter based on PCF and metal surface plasmons resonance is proposed by designing a new structure and filling gold wire into certain air holes. The introducing of gold wire aims to couple with the basic modes. Then high birefringence is obtained to improve the splitter’s performances including length, bandwidth and maximal extinction ratio. The numerical results demonstrate that the splitter can be the shortest length of 100 μm (to our knowledge) and the broad bandwidth is 470 nm simultaneously. And when the splitter’s length is set as 104 μm, the widest bandwidth reaches the maximum 575 nm (to our knowledge) which covers almost all the E, S, C, L, and U communication band. In addition, the structure is relatively simple, so it is easy to fabricate using available methods. These properties will help designing splitter in the optical communication and sensing system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Short-time polymerization and convolution kinetics in the analysis of the initiation step of isoprene polymerization over neodymium catalyst

The paper considers a convolution model for polymerization of 1,3-dienes in the presence of organometallic catalysts. It is shown that initial steps of polymerization can be represented as a set of shifted parallel reactions of the chain propagation, in which shift value are governed by the kinetics of the initiation step. In this case, polymer accumulation curve is described by an equation containing convolution of functions which allow one to solve an inverse problem of restoring the function of active site accumulation. Based on the example of isoprene polymerization over neodymium catalyst, it was demonstrated that the results of the inverse problem solution are in good agreement with the experimental data on concentration of the active sites. These data were obtained by a method of controlled introduction of inhibitor in short-time polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Validation of an Additively Manufactured Stiffness-Optimized Short-Fiber Reinforced Composite Clevis Joint

This effort describes experiments for the validation of the response of an additively manufactured stiffness-optimized short-fiber reinforced composite. A Direct Ink Write (DIW) method is used to additively manufacture a clevis joint plate which was designed such that its compliance would be minimized (i.e., stiffness maximized) for far-field axial loading. A unique aspect of the optimization scheme is that it accounts for manufacturing constraints, such as tool turn radius and tool path spacing. Along with the optimized clevis joint plate, additively manufactured 0°–90° and ± 45° composite plates of the same number of layers, as well as a control 0°–90° sample of resin only, were also studied. In addition to far-field load-displacement, near-field strain was monitored using digital image correlation (DIC). The results showed that the optimized plate did indeed exhibit the largest stiffness, based on far-field measurements. DIC-measured strains showed that locally the axial strain component, which is the largest, was also minimized for the optimized specimen, although the other strain components followed different trends. Furthermore, in the experiments it was seen that the optimized design exhibited a nonlinear/hysteretic behavior which is believed to be a consequence of its internal gap/cell structure. This internal structure, which results by optimized placement of material, although explicitly not accounted for in the optimization, may affect global response. Lastly, although not a part of the optimization study itself, the failure load for the optimized joint plate was also seen to be the largest of all the cases studied.

42 ENGINEERING↗

A general spatial-temporal framework for short-term building temperature forecasting at arbitrary locations with crowdsourcing weather data

Weather forecasting has been a critical component to predict and control building energy consumption for better building energy management. Without accessibility to other data sources, the onsite observed temperatures or the airport temperatures are used in forecast models. In this paper, we present a novel approach by utilizing the crowdsourcing weather data from neighboring personal weather stations (PWS) to improve the weather forecast accuracy around buildings using a general spatial-temporal modeling framework. The final forecast is based on the ensemble of local forecasts for the target location using neighboring PWSs. Our approach is distinguished from existing literature in various aspects. First, we leverage the crowdsourcing weather data from PWS in addition to public data sources. In this way, the data is at much finer time resolution (e.g., at 5-minute frequency) and spatial resolution (e.g., arbitrary location vs grid). Second, our proposed model incorporates spatial-temporal correlation information of weather variables between the target building and a set of neighboring PWSs so that underlying correlations can be effectively captured to improve forecasting performance. Here, we demonstrate the performance of the proposed framework by comparing to the benchmark models on temperature forecasting for a building located at an arbitrary location at San Antonio, Texas, USA. In general, the proposed model framework equipped with machine learning technique such as Random Forest can improve forecasting by 50% compares with persistent model and has 90% chance to outperform airport forecast in short-term forecasting. In a real-time setting, the proposed model framework can provide more accurate temperature forecasting results compared with using airport temperature forecast for most forecast horizon. Moreover, we analyze the sensitivity of model parameters to gain insights on how crowdsourcing data from the neighboring personal weather stations impacts forecasting performance. Finally, we implement our model in other cities such as Syracuse and Chicago to test the model's performance in different landforms and climate types.

54 ENVIRONMENTAL SCIENCES↗

Should Sea-Ice Modeling Tools Designed for Climate Research Be Used for Short-Term Forecasting?

In theory, the same sea-ice models could be used for both research and operations, but in practice, differences in scientific and software requirements and computational and human resources complicate the matter. Although sea-ice modeling tools developed for climate studies and other research applications produce output of interest to operational forecast users, such as ice motion, convergence, and internal ice pressure, the relevant spatial and temporal scales may not be sufficiently resolved. For instance, sea-ice research codes are typically run with horizontal resolution of more than 3 km, while mariners need information on scales less than 300 m. Certain sea-ice processes and coupled feedbacks that are critical to simulating the Earth system may not be relevant on these scales; and therefore, the most important model upgrades for improving sea-ice predictions might be made in the atmosphere and ocean components of coupled models or in their coupling mechanisms, rather than in the sea-ice model itself. This paper discusses some of the challenges in applying sea-ice modeling tools developed for research purposes for operational forecasting on short time scales, and highlights promising new directions in sea-ice modeling.

54 ENVIRONMENTAL SCIENCES↗

Short- and medium-range orders in Al90Tb10 glass and their relation to the structures of competing crystalline phases

Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a ‘3661’ or ‘15551’ sequence. Medium-range order (MRO) in Bergman-type packing extended out to the second and third coordination shells is also clearly observed. Analysis of the network formed by the ‘3661’ and ‘15551’ clusters show that ~82% of such SRO units share their faces or vertexes, while only ~6% of neighboring SRO pairs are interpenetrating. Such a network topology is consistent with the Bergman-type MRO around the Tb-centers. Moreover, crystal structure searches using genetic algorithm and the neural network interatomic potential reveal several low-energy metastable crystalline structures in the composition range close to Al 90 Tb 10 . Some of these crystalline structures have the ‘3661’ SRO while others have the ‘15551’ SRO. While the crystalline structures with the ‘3661’ SRO also exhibit the MRO very similar to that observed in the glass, the ones with the ‘15551’ SRO have very different atomic packing in the second and third shells around the Tb centers from that of the Bergman-type MRO observed in the glassy phase.

36 MATERIALS SCIENCE↗

Outgassing of implanted He via short circuit transport along phase and grain boundaries in vapor co-deposited Cu-W nanocomposites

We investigate the response of physical vapor co-deposited copper (Cu)-tungsten (W) nanocomposites to helium (He) implantation. Nuclear reaction analysis (NRA) reveals that a substantial fraction of He implanted into these materials escapes during implantation. Analysis of nanocomposite microstructure shows that the He loss is likely due to its transport out of the material by diffusion along phase and grain boundaries. Lastly, our findings suggest that solid-state interfaces such as phase and grain boundaries are short circuit diffusion pathways for transport of He.

36 MATERIALS SCIENCE↗

Water requirements of short rotation poplar coppice: Experimental and modelling analyses across Europe

Poplars are among the most widely used short rotation woody coppice (SRWC) species but due to their assumed high water use, concerns have been raised with respect to large-scale exploitation and potentially detrimental effects on water resources. Here we present a quantitative analysis of the water requirements of poplar SRWC using experimental data and a soil water balance modelling approach at three different sites across Europe. We used (i) eddy covariance (EC) measurements (2004–2006) at an irrigated SRWC grown on a previous rice paddy in northern Italy, (ii) Bowen ratio and energy balance (BREB) measurements (2008–2015) and EC (2011–2015) at a SRWC in rain-fed uplands in the Czech Republic, and (iii) EC measurements (2010–2013) at a SRWC on a previous agricultural land with a shallow water table in Belgium. Without any calibration against water balance component measurements, simulations by the newly developed soil water balance model R-4ET were compared with evapotranspiration (ET) measurements by EC and BREB with a resulting mean root mean square error (RMSE) of 0.75 mm day -1 . In general, there was better agreement between EC and the model (RMSE = 0.66 mm day -1 ) when EC data were adjusted for lack of energy balance closure. A comparison of the simulated and measured soil water content yielded a mean RMSE of 0.03 m 3 m -3 . The mean annual crop coefficient, i.e. the ratio between actual and reference ET, was 0.82 (ranging from 0.65 to 0.95) while the monthly maxima reached 1.16. These values indicated that ET of poplar SRWC was significantly lower than ET of a well-watered grass cover at the annual time scale, but exceeded ET of the reference cover at shorter time scales during the growing season. We show that the model R-4ET is a simple, yet reliable tool for the assessment of water requirements of existing or planned SRWC. For very simple assessments on an annual basis, using a crop coefficient of 0.86 (adjusted to a sub-humid climate), representing an average value across the three sites in years with no evident drought stress, is supported by this analysis.

54 ENVIRONMENTAL SCIENCES↗