Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sheet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

A microscopic study of crack initiation mechanisms in 7075 aluminum alloy sheets.

A study of the opening mode of crack initiation in 7075-T6 aluminum alloy sheets has been conducted with the aid of a scanning electron microscope. Observations were made from several orientations, including the top view of the specimen which showed the notch profile and the edge view of the specimen which showed the entire notch front along the specimen thickness. It was found that the edge view exhibited the first signs of permanent deformation at about 55% of the breaking strength. These changes took the form of deformation bands which were aligned in the direction of the tensile axis and apparently defined limiting regions of homogeneous slip. It is felt that the appearance of microcracks at loads approaching the breaking strength was of fundamental importance in the formation of the final fracture surface. Many of these microcraks were initiated at intermetallic particles and other metallurgically weak regions on the notch surface. It was also possible to correlate the strain in the notch with the stress intensity factor for the various loads. Very large plastic strains were observed on the notch tip as compared to published values of elongation at fracture for unnotched specimens.

Jones, D. L.↗
NASA NTRS1973

Fracture analysis of surface- and through-cracked sheets and plates.

The Neuber stress-concentration relation for notches in an elastic-plastic material subjected to shear loading was generalized for a crack in a finite plate subjected to tensile loading. An equation was derived which related the linear elastic stress-intensity factor, the applied stress, and two material parameters. The equation was then used as a two-parameter fracture criterion for surface- and through-cracked specimens. Fracture data from the literature on surface- and through-cracked sheet and plate specimens of steel, titanium alloy, titanium weldment, and aluminum alloy tested at room and cryogenic temperature were analyzed according to the proposed equation. For surface cracks, wide ranges of crack-depth to crack-length ratio and crack-depth to specimen-thickness ratio were considered. For through cracks, wide ranges of crack length and specimen width were also considered.-

Newman, J. C., Jr.↗
NASA NTRS1974

Comparison of isothermal and cyclic oxidation behavior of twenty-five commercial sheet alloys at 1150 C

The cyclic and isothermal oxidation resistance of 25 high-temperature Ni-, Co-, and Fe-base sheet alloys after 100 hours in air at 1150 C was compared. The alloys were evaluated in terms of their oxidation, scaling, and vaporization rates and their tendency for scale spallation. These values were used to develop an oxidation rating parameter based on effective thickness change, as calculated from a mass balance. The calculated thicknesses generally agreed with the measured values, including grain boundary oxidation, to within a factor of 3. Oxidation behavior was related to composition, particularly Cr and Al content.

Barrett, C. A.↗
NASA NTRS1974

Effect of outdoor exposure at ambient and elevated temperatures on fatigue life of Ti-6Al-4V titanium alloy sheet in the annealed and the solution treated and aged condition

Specimens of Ti-6Al-4V titanium alloy sheet in the annealed and the solution-treated and aged heat-treatment condition were exposed outdoors at ambient and 560 K (550 F) temperatures to determine the effect of outdoor exposure on fatigue life. Effects of exposure were determined by comparing fatigue lives of exposed specimens to those of unexpected specimens. Two procedures for fatigue testing the exposed specimens were evaluated: (1) fatigue tests conducted outdoors by applying 1200 load cycles per week until failure occurred and (2) conventional fatigue tests (continuous cycling until failure occurred) conducted indoors after outdoor exposure under static load. The exposure period ranged from 9 to 28 months for the outdoor fatigue-test group and was 24 months for the static-load group. All fatigue tests were constant-amplitude bending of specimens containing a drilled hole (stress concentration factor of 1.6). The results of the tests indicate that the fatigue lives of solution-treated and aged specimens were significantly reduced by the outdoor exposure at 560 K but not by the exposure at ambient temperature. Fatigue lives of the annealed specimens were essentially unaffected by the outdoor exposure at either temperature. The two test procedures - outdoor fatigue test and indoor fatigue test after outdoor exposure - led to the same conclusions about exposure effects.

Phillips, E. P.↗
NASA NTRS1971

Relationship of mechanical characteristics and microstructural features to the time-dependent edge notch sensitivity of inconel 718 sheet

Time-dependent notch sensitivity of Inconel 718 sheet was observed at 900 F to 1200 F (482 - 649 C). It occurred when edge-notched specimens were loaded below the yield strength and smooth specimen tests showed that small amounts of creep consumed large rupture life fractions. The severity of the notch sensitivity was reduced by decreasing the solution temperature, increasing the time and/or temperature of aging and increasing the test temperature to 1400 F (760 C). Elimination of time-dependent notch sensitivity correlated with a change in dislocation motion mechanism from shearing to by-passing precipitate particles.

Wilson, D. J.↗
NASA NTRS1974

Plasma sheet at lunar distance during magnetospheric substorms

Evidence is described from the charged particle lunar environment experiment (CPLEE) to support the thesis that the plasma sheet thins at the onset of a substorm and expands during substorm recovery in the region of X ranging from -60 to -15 earth radii. A comparison of substorm data from Vela 6A and CPLEE suggests that thinning does not occur simultaneously throughout the region but propagates as a 'thinning' wave as plasma is ejected from the near-earth region of the tail.

Rich, F. J.↗
NASA NTRS1974

Energy and pitch angle distributions for auroral ions using the current sheet acceleration model

Using a dipole-plus-tail magnetic field model, H(+), He(+2), and O(+6) ions are followed numerically, backward in time, from an output plane perpendicular to the axis of the geomagnetic tail, to their point of entrance to the magnetosphere as solar wind particles in the magnetosheath. An adiabatic or guiding center approximation is used in regions where the particles do not interact directly with the current sheet. A Maxwellian distribution with bulk flow is assumed for solar wind particles in the magnetosheath. Bulk velocity, density, and temperature along the magnetopause are taken from the fluid calculations of Spreiter. Using Liouville's theorem, and varying initial conditions at the output plane, the distribution function is found as a function of energy and pitch angle at the output plane. These results are then mapped to the auroral ionosphere using guiding center theory.

Jaeger, E. F.↗
NASA NTRS1974

Lunar dayside plasma sheet depletion - Inference from magnetic observations

The existence of a day-side lunar cavity in the plasma sheet, showing some depletion of plasma, has been inferred from cavity-associated magnetic characteristics observed by orbital and surface lunar magnetometers. These characteristics include a day-side enhancement in the mean magnetic field and day-side levels of amplification of eddy current induced magnetic field fluctuations typical of cavity confinement.

Schubert, G.↗
NASA NTRS1975

Fracture analysis of various cracked configurations in sheet and plate materials

A two-parameter fracture criterion was derived which relates the linear-elastic stress-intensity factor at failure, the elastic nominal failure stress, and two material parameters. The fracture criterion was used previously to analyze fracture data for surface- and through-cracked sheet and plate specimens under tensile loading. The fracture criterion was applied to center-crack tension, compact, and notch-band fracture specimens made of steel, titanium, or aluminum alloy materials tested at room temperature. The fracture data included a wide range of crack lengths, specimen widths, and thicknesses. The materials analyzed had a wide range of tensile properties. Failure stresses calculated using the criterion agreed well (plus or minus 10 percent) with experimental failure stresses. The criterion was also found to correlate fracture data from different specimen types (such as center-crack tension and compact specimens), within plus or minus 10 percent for the same material, thickness, and test temperature.

Newman, J. C., Jr.↗
NASA NTRS1975

Comparison of isothermal and cyclic oxidation behavior of twenty-five commercial sheet alloys at 1150 C

Twenty-five commercial nickel-, iron-, and cobalt-base sheet alloys incorporating chromium or chromium and aluminum additions for oxidation resistance were tested at 1150 C in air for 100 hr in both isothermal and 1-hr cyclic furnace exposures. The alloys were evaluated by sample specific weight change, by type of scale formed, by amount and type of spall, and by sample thickness change and microstructure.-

Barrett, C. A.↗
NASA NTRS1975

Retort braze bonding of borsic/aluminum composite sheet to titanium

Braze bonding studies between Borsic/aluminum composite and titanium sheet were conducted to establish acceptable brazing techniques and to assess potential joint efficiencies. Excellent braze joints were produced which exhibited joint strengths exceeding 117 MPa (17,000 psi) and which retained up to 2/3 of this strength at 589 K (600 F). Noticeable composite strength degradation resulting from the required high temperature braze cycle was found to be a problem.

Webb, B. A.↗
NASA NTRS1976

Finite element computer program to analyze cracked orthotropic sheets

A two dimensional orthotropic sheet with through-the-thickness cracks and temperature gradient was analyzed. The program includes special crack tip elements that account for singular stress fields associated with crack opening and crack sliding displacements at the crack tip. The program also includes a linear spring element and a constant strain, triangular element. A number of problems for which closed form solutions exist were analyzed to demonstrate the capabilities of the program.

Chu, C. S.↗
NASA NTRS1976

Several intact or broken stringers attached to an orthotropic sheet with a crack

Several intact or broken stringers which are continuously attached to a cracked orthotropic sheet through an adhesive are considered. The effect of orthotropy on the stress intensity factors is investigated. The stringers are assumed to be partially debonded due to high stress concentrations. The shear stress distribution between the stringers and the plate and the stress intensity factors are obtained from an integral equation which represents the continuity of displacements along the bond lines.

Arin, K.↗
NASA NTRS1975

Magnetospheric protons and electrons encountered by the moon in the plasma sheet

Results are summarized for a study of plasma-sheet particles (and their flow) encountered by the moon during its passage through the geomagnetic tail. The study is based on analysis of data obtained with a modulated Faraday cup on board the lunar-anchored spacecraft Explorer 35. It is shown that the electrons have a rapidly fluctuating non-Maxwellian energy distribution with a mean energy of several hundred electron volts and a density of approximately 0.2 per cu cm. Protons with energies of the order of 1 keV were usually detected above the instrument background when flowing towards earth at about 200 km/sec. It is suggested that strong terrestrial polar winds during the early history of the earth-moon system could have caused some erosion of the front side of the moon and that the relative smoothness of the same side could be explained in terms of gravitational shielding by the earth from the interplanetary rock flux.

Prakash, A.↗
NASA NTRS1976

Interactions of the plasma sheet with the lunar surface at the Apollo 14 site

Calculations of the magnetic shadow zones of lunar-based particle detectors are extended to include the effects of local remanent magnetic fields. At the Apollo 14 site, the local magnetic field is approximated as that of a dipole. Numerically calculated open and shadowed zones are shown to be in agreement with quiet-time plasma-sheet observations of the charged-particle lunar-environment experiment. An analysis of three storm-time observations indicates that magnetic shadowing can significantly alter the near-lunar-surface electrostatic potential distribution.

Reiff, P. H.↗
NASA NTRS1977

Inexpensive silicon sheets for solar cells

Technique of producing silicon sheets by drawing gridlike or porous graphite gauze through silicon melt is readily adaptable to mass production, making process applicable to inexpensive manufacture of solar cell arrays.

Ciszek, T. F.↗
NASA NTRS1976

A thrust-sheet propulsion concept using fissionable elements

A space propulsion concept is proposed and analyzed which consists of a thin sheet coated on one side with fissionable material, so that nuclear power is converted directly into propulsive power. Thrust is available both from ejected fission fragments and from thermal radiation. Optimum thicknesses are determined for the active and substrate layers. This concept is shown to have potential mission capability (in terms of velocity increments) superior to that of all other advanced propulsion concepts for which performance estimates are available. A suitable spontaneously fissioning material such as Cf254 could provide an extremely high-performance first stage beyond earth orbit. In contrast with some other advanced nuclear propulsion concepts, there is no minimum size below which this concept is infeasible.

Moeckel, W. E.↗