Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRUCTURAL MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

The structure of mixed H2O-OH monolayer films on Ru(0001)

Scanning tunneling microscopy (STM) and x-ray absorption spectroscopy (XAS) have been used to study the structures produced by water on Ru(0001) at temperatures above 140 K. It was found that while undissociated water layers are metastable below 140 K, heating above this temperature produces drastic transformations whereby a fraction of the water molecules partially dissociate and form mixed H{sub 2}O-OH structures. XPS and XAS revealed the presence of hydroxyl groups with their O-H bond essentially parallel to the surface. STM images show that the mixed H{sub 2}O-OH structures consist of long narrow stripes aligned with the three crystallographic directions perpendicular to the close-packed atomic rows of the Ru(0001) substrate. The internal structure of the stripes is a honeycomb network of H-bonded water and hydroxyl species. We found that the metastable low temperature molecular phase can also be converted to a mixed H{sub 2}O-OH phase through excitation by the tunneling electrons when their energy is 0.5 eV or higher above the Fermi level. Structural models based on the STM images were used for Density Functional Theory optimizations of the stripe geometry. The optimized geometry was then utilized to calculate STM images for comparison with the experiment.

36 MATERIALS SCIENCE↗

Electronic structure of (Ge{sub 2}Sb{sub 2}Te{sub 5}){sub 1-x}(In{sub 3}SbTe{sub 2}){sub x} investigated by x-ray photoelectron spectroscopy

We have investigated the core levels and the valence band of (Ge{sub 2}Sb{sub 2}Te{sub 5}){sub 1-x}(In{sub 3}Sb{sub 1}Te{sub 2}){sub x} quaternary phase system (IGST) by means of x-ray photoelectron spectroscopy. A systematic shift of Sb 3d and Ge 2p core-level peaks toward lower binding energies side was observed with increasing indium amount, whereas the In 3d and Te 3d core peaks showed less change. The Sb 3d and Ge 2p core-level shift is attributed to an increase in the electronic charge of p-electrons dependent of indium amount. The valence band spectra show a distinct change in the sp configuration with indium concentration change. The change in the local bonding as the indium amount increase has a profound impact on both local atomic arrangement and amorphous-to-crystalline transformation temperature. The difference in the photoemission spectra have been discussed according to a simple structural model suggesting that the Na site in IGST can be occupied by Te, Sb, In, and vacancy, whereas in GST it is occupied only by Te.

36 MATERIALS SCIENCE↗

Unexpected structural softening of interstitial boron solid solution WB{sub 3+x}

Using first-principles calculations, we reveal an unexpected structural softening in a recently proposed WB{sub 3+x} structural model that tries to explain the X-ray diffraction, high resolution TEM, pressure dependence of the normalized lattice c/a ratio, and hardness experimental results of the synthesized tungsten boride compounds with a nominal composition WB{sub 4}. We show that the interstitial boron in WB{sub 3+x}, which was proposed to strengthen the covalent bonding network, unexpectedly weakens the atomic bonding, resulting in a large reduction of its indentation strength to well below that of WB{sub 3}. This is in direct contradiction to the experimental results showing that synthesized WB{sub 4} is harder than WB{sub 3}. The unusual structural softening is attributed to the unique three-center covalent bonding formed by the interstitial boron atoms that can easily deform under indentation. Our results show that the proposed interstitial boron solid solution WB{sub 3+x} structure is incompatible with experimental results, which calls for further investigations to determine the crystal structure of the synthesized WB{sub 4}.

36 MATERIALS SCIENCE↗

Cooperative effect of monoclinic distortion and sinusoidal modulation in the martensitic structure of Ni{sub 2}FeGa

The structural features of the '5M' martensitic phase in Ni{sub 2}FeGa alloys have been determined by electron diffraction using the multi-slice least-squares (MSLS) method. The results demonstrate that the '5M' phase contains an evident cooperative effect of monoclinic distortion and sinusoidal modulation along the [110]{sub c} direction. Theoretical simulations based on our refined data suggest that the '5M' martensitic phase observed in Ni-Fe-Ga and Ni-Mn-Ga has visible common behaviors in both stacking sequence and local structural distortion. Considering the cooperative effect of monoclinic distortion and sinusoidal modulation, we demonstrate that the '7M' martensitic phase could adopt two equivalent structural phases corresponding with the stacking sequences of (43{sup -}){sub 2} and (52{sup -}){sub 2}, respectively. - Graphical abstract: The structural model of the '5M' Ni{sub 2}FeGa martensite viewed along the [001]{sub c} (i.e. [010]{sub m}) zone axis, demonstrating the cooperative effect of monoclinic distortion and sinusoidal modulation along the [110]{sub c} direction.

36 MATERIALS SCIENCE↗

Biophysical studies and modelling indicate the binding preference of TAZ WW domain for LATS1 PPxY motif

Highlights: • TAZ WW domain preferentially binds to the second PPxY motif of LATS1. • Modelled structure of TAZ WW-PPxY2 is stable and adopts the typical WW fold. • Binding site residues, L143 and T150 reduce the binding affinity of TAZ WW domain. The Hippo tumor suppressor pathway is an important regulator of cell proliferation and apoptosis, and signal transduction occurs through phosphorylation of the effector protein TAZ by the serine/threonine kinase LATS1/2. Here, we report the biophysical and computational studies to characterize the interaction between TAZ and LATS1/2 through WW domain-PPxY motif binding. We show that the TAZ WW domain exhibits a binding preference for the second of the two PPxY motifs of LATS1 in vitro. We modelled the structure of the domain in complex with LATS1 PPxY2 peptide and, through molecular dynamics simulations, show that WW domain-PPxY2 complex is stable with some flexibility in the peptide region. Next, we predict and verify that L143 and T150 of the WW domain are important for TAZ binding with the PPxY2 peptide using mutational and isothermal titration calorimetric studies. Furthermore, we suggest that the electrostatic potential of charged residues within the binding pocket may influence the ligand affinity among otherwise highly similar WW domains.

60 APPLIED LIFE SCIENCES↗

Anisotropic In distribution in InGaN core-shell nanowires

In this work, we investigate the local atomic structure of defect-free homogeneous and self-organized core-shell structure nanowires by means of X-ray Absorption Fine Structure (XAFS) Spectroscopy at the In L{sub III} and K edges and Multiwavelength Anomalous Diffraction. The results are interpreted by comparison of the experimental data with X-ray absorption calculations carried out with ab initio structural models. Extended-XAFS data analysis at In K-edge shows an anisotropic In distribution in the second nearest neighbors pointing out to a deviation from randomness in In distribution for the core-shell sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calsequestrin isoforms localize to different ER subcompartments: Evidence for polymer and heteropolymer-dependent localization

Skeletal muscle calsequestrin (skelCSQ) and cardiac calsequestrin (cardCSQ) are resident proteins of the ER/SR, but mechanisms by which CSQ is retained inside membrane lumens remain speculative. A structural model that predicts linear CSQ polymers has been developed that might explain CSQ concentration and localization inside junctional SR lumens, however little evidence exists for polymer formation in intact cells or for its effects on subcellular localization. We previously showed that cardCSQ is efficiently retained within the ER, but its retention is lost under conditions expected to disrupt its polymerization. In the present study, we found unexpectedly that skelCSQ shows no co-localization with cardCSQ in COS cells or in rat neonatal heart cells, but instead concentrates in a membrane compartment (ERGIC) that is just distal to that of cardCSQ. Consistent with this difference in immunofluorescent localization, the structures of CSQ ({sup 316}Asn-linked) glycans showed two types of pre-Golgi processing. Despite the difference in subcellular distribution of individual wild-type forms of CSQ, however, pairs of different CSQ molecules (for example, different isoforms or different fluorescent fusion proteins) consistently co-localized, suggesting that separate forms of CSQ polymerize in different parts of the same secretory pathway, while different CSQ pairs localize together through heteropolymerization.

60 APPLIED LIFE SCIENCES↗

DETERMINATION OF THE INTERIOR STRUCTURE OF TRANSITING PLANETS IN MULTIPLE-PLANET SYSTEMS

Tidal dissipation within a short-period transiting extrasolar planet perturbed by a companion object can drive orbital evolution of the system to a so-called tidal fixed point, in which the apses of the transiting planet and its perturber are aligned, and variations in orbital eccentricities vanish. Significant contribution to the apsidal precession rate is made by gravitational quadrupole fields, created by the transiting planets tidal and rotational distortions. The fixed-point orbital eccentricity of the inner planet is therefore a strong function of its interior structure. We illustrate these ideas in the specific context of the recently discovered HAT-P-13 exoplanetary system, and show that one can already glean important insights into the physical properties of the inner transiting planet. We present structural models of the planet, which indicate that its observed radius can be maintained for a one-parameter sequence of models that properly vary core mass and tidal energy dissipation in the interior. We use an octupole-order secular theory of the orbital dynamics to derive the dependence of the inner planet's eccentricity, e{sub b} , on its tidal Love number, k {sub 2b}. We find that the currently measured eccentricity, e{sub b} = 0.021 +- 0.009, implies 0.116 < k {sub 2b} < 0.425, 0 M {sub +} < M {sub core} < 120 M {sub +}, and 10, 000 < Q{sub b} < 300, 000. Improved measurement of the eccentricity will soon allow for far tighter limits to be placed on all of these quantities, and will provide an unprecedented probe into the interior structure of an extrasolar planet.

79 ASTRONOMY AND ASTROPHYSICS↗

Infrared Protein Crystallography

We consider the application of infrared spectroscopy to protein crystals, with particular emphasis on exploiting molecular orientation through polarization measurements on oriented single crystals. Infrared microscopes enable transmission measurements on individual crystals using either thermal or nonthermal sources, and can accommodate flow cells, used to measure spectral changes induced by exposure to soluble ligands, and cryostreams, used for measurements of flash-cooled crystals. Comparison of unpolarized infrared measurements on crystals and solutions probes the effects of crystallization and can enhance the value of the structural models refined from X-ray diffraction data by establishing solution conditions under which they are most relevant. Results on several proteins are consistent with similar equilibrium conformational distributions in crystal and solutions. However, the rates of conformational change are often perturbed. Infrared measurements also detect products generated by X-ray exposure, including CO{sub 2}. Crystals with favorable symmetry exhibit infrared dichroism that enhances the synergy with X-ray crystallography. Polarized infrared measurements on crystals can distinguish spectral contributions from chemically similar sites, identify hydrogen bonding partners, and, in opportune situations, determine three-dimensional orientations of molecular groups. This article is part of a Special Issue entitled: Protein Structure and Function in the Crystalline State.

08 HYDROGEN↗

Molecular Investigations of the Structure and Function of the Protein Phosphatase 1-Spinophilin-Inhibitor 2 Heterotrimeric Complex

Regulation of the major Ser/Thr phosphatase protein phosphatase 1 (PP1) is controlled by a diverse array of targeting and inhibitor proteins. Though many PP1 regulatory proteins share at least one PP1 binding motif, usually the RVxF motif, it was recently discovered that certain pairs of targeting and inhibitor proteins bind PP1 simultaneously to form PP1 heterotrimeric complexes. To date, structural information for these heterotrimeric complexes and, in turn, how they direct PP1 activity is entirely lacking. Using a combination of NMR spectroscopy, biochemistry, and small-angle X-ray scattering (SAXS), we show that major structural rearrangements in both spinophilin (targeting) and inhibitor 2 (I-2, inhibitor) are essential for the formation of the heterotrimeric PP1-spinophilin-I-2 (PSI) complex. The RVxF motif of I-2 is released from PP1 during the formation of PSI, making the less prevalent SILK motif of I-2 essential for complex stability. The release of the I-2 RVxF motif allows for enhanced flexibility of both I-2 and spinophilin in the heterotrimeric complex. In addition, we used inductively coupled plasma atomic emission spectroscopy to show that PP1 contains two metals in both heterodimeric complexes (PP1-spinophilin and PP1-I-2) and PSI, demonstrating that PSI retains the biochemical characteristics of the PP1-I-2 holoenzyme. Finally, we combined the NMR and biochemical data with SAXS and molecular dynamics simulations to generate a structural model of the full heterotrimeric PSI complex. Collectively, these data reveal the molecular events that enable PP1 heterotrimeric complexes to exploit both the targeting and inhibitory features of the PP1-regulatory proteins to form multifunctional PP1 holoenzymes.

59 BASIC BIOLOGICAL SCIENCES↗

The Structure of Mixed H(2)O-OH Monolayer Films on Ru (0001)

Scanning tunneling microscopy (STM) and x-ray absorption spectroscopy (XAS) have been used to study the structures produced by water on Ru(0001) at temperatures above 140 K. It was found that while undissociated water layers are metastable below 140 K, heating above this temperature produces drastic transformations, whereby a fraction of the water molecules partially dissociate and form mixed H{sub 2}O-OH structures. X-ray photoelectron spectroscopy and XAS revealed the presence of hydroxyl groups with their O-H bond essentially parallel to the surface. STM images show that the mixed H{sub 2}O-OH structures consist of long narrow stripes aligned with the three crystallographic directions perpendicular to the close-packed atomic rows of the Ru(0001) substrate. The internal structure of the stripes is a honeycomb network of H-bonded water and hydroxyl species. We found that the metastable low temperature molecular phase can also be converted to a mixed H{sub 2}O-OH phase through excitation by the tunneling electrons when their energy is 0.5 eV or higher above the Fermi level. Structural models based on the STM images were used for density functional theory optimizations of the stripe geometry. The optimized geometry was then utilized to calculate STM images for comparison with the experiment.

36 MATERIALS SCIENCE↗

STEM HAADF Image Simulation of the Orthorhombic M1 Phase in the Mo-V-Nb-Te-O Propane Oxidation Catalyst

A full frozen phonon multislice simulation of high angle annular dark field scanning transmission electron microscopy (HAADF STEM) images from the M1 phase of the Mo-V-Nb-Te-O propane oxidation catalyst has been performed by using the latest structural model obtained using the Rietveld method. Simulated contrast results are compared with experimental HAADF images. Good agreement is observed at ring sites, however significant thickness dependence is noticed at the linking sites. The remaining discrepancies between the model based on Rietveld refinement and image simulations indicate that the sampling of a small volume element in HAADF STEM and averaging elemental contributions of a disordered site in a crystal slab by using the virtual crystal approximation might be problematic, especially if there is preferential Mo/V ordering near the (001) surface.

36 MATERIALS SCIENCE↗

A review of some problems in global-local stress analysis

The various types of local-global finite-element problems point out the need to develop a new generation of software. First, this new software needs to have a complete analysis capability, encompassing linear and nonlinear analysis of 1-, 2-, and 3-dimensional finite-element models, as well as mixed dimensional models. The software must be capable of treating static and dynamic (vibration and transient response) problems, including the stability effects of initial stress, and the software should be able to treat both elastic and elasto-plastic materials. The software should carry a set of optional diagnostics to assist the program user during model generation in order to help avoid obvious structural modeling errors. In addition, the program software should be well documented so the user has a complete technical reference for each type of element contained in the program library, including information on such topics as the type of numerical integration, use of underintegration, and inclusion of incompatible modes, etc. Some packaged information should also be available to assist the user in building mixed-dimensional models. An important advancement in finite-element software should be in the development of program modularity, so that the user can select from a menu various basic operations in matrix structural analysis.

Nelson, Richard B.↗

Syntheses, structures, and ionic conductivities of perovskite-structured lithium–strontium–aluminum/gallium–tantalum-oxides

The ionic conductivities of new perovskite-structured lithium–strontium–aluminum/gallium–tantalum oxides were investigated. Solid solutions of the new perovskite oxides, (Li{sub x}Sr{sub 1−x})(Al{sub (1−x)/2}Ta{sub (1+x)/2})O{sub 3} and (Li{sub x}Sr{sub 1−x})(Ga{sub (1−x)/2}Ta{sub (1+x)/2})O{sub 3}, were synthesized using a ball-milled-assisted solid-state method. The partial substitution of the smaller Ga{sup +3} for Ta{sup +5} resulted in new compositions, the structures of which were determined by neutron diffraction measurements using a cubic perovskite structural model with the Pm−3m space group. Vacancies were introduced into the Sr(Li) sites by the formation of solid solutions with compositions (Li{sub x}Sr{sub 1−x−y}☐{sub y})(Ga{sub [(1−x)/2]−y}Ta{sub [(1+x)/2]+y})O{sub 3}, where the composition range of 0≤y≤0.20 was examined for x=0.2 and 0.25. The highest conductivity, 1.85×10{sup −3} S cm{sup −1} at 250 °C, was obtained for (Li{sub 0.25}Sr{sub 0.625}☐{sub 0.125})(Ga{sub 0.25}Ta{sub 0.75})O{sub 3} (x=0.25, y=0.125). Enhanced ionic conductivities were achieved by the introduction of vacancies at the A-sites. - Graphical abstract: Novel lithium-conducting oxides with the cubic perovskite structure (Li{sub x}Sr{sub 1−x−y}☐{sub y})(Ga{sub [(1−x)/2]−y}Ta{sub [(1+x)/2]+y})O{sub 3} provide a specific solid-solution region with various x and y values, exhibiting the highest ionic conductivity (1.85 S cm{sup −1} at 250 °C) for (Li{sub 0.25}Sr{sub 0.625}☐{sub 0.125})(Ga{sub 0.25}Ta{sub 0.75})O{sub 3} (x=0.25, y=0.125 in (Li{sub x}Sr{sub 1−x−y}☐{sub y})(Ga{sub [(1−x)/2]−y}Ta{sub [(1+x)/2]+y})O{sub 3}). The vacancies (☐) introduced into the A-sites contribute to the enhancement of lithium diffusion in the perovskite structure because of the enlargement of the bottleneck size and suppression of the interaction between lithium and oxygen. - Highlights: • The perovskite-structured novel Li–Sr–Al/Ga–Ta oxides were investigated. • The Ga cation offers a larger bottleneck by increasing the B−O bond length. • The greater conductivity was observed upon Ga-containing perovskite. • The ionic conductivity was improved by the introduction of vacancies into A-site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of dimensionality and interface type on optical and electronic properties of CdS/ZnS core-shell nanocrystals—A first-principles study

Semiconducting nanocrystals (NCs) have become one of the leading materials in a variety of applications, mainly due to their size tunable band gap and high intensity emission. Their photoluminescence (PL) properties can be notably improved by capping the nanocrystals with a shell of another semiconductor, making core-shell structures. We focus our study on the CdS/ZnS core-shell nanocrystals that are closely related to extensively studied CdSe/CdS NCs, albeit exhibiting rather different photoluminescence properties. We employ density functional theory to investigate the changes in the electronic and optical properties of these nanocrystals with size, core/shell ratio, and interface structure between the core and the shell. We have found that both the lowest unoccupied eigenstate (LUES) and the highest occupied eigenstate (HOES) wavefunction (WF) are localized in the core of the NCs, with the distribution of the LUES WF being more sensitive to the size and the core/shell ratio. We show that the radiative lifetimes are increasing, and the Coulomb interaction energies decrease with increasing NC size. Furthermore, we investigated the electronic and optical properties of the NCs with different interfaces between the core and the shell and different core types. We find that the different interfaces and core types have rather small influence on the band gaps and the absorption indexes, as well as on the confinement of the HOES and LUES WFs. Also the radiative lifetimes are found to be only slightly influenced by the different structural models. In addition, we compare these results with the previous results for CdSe/CdS NCs, reflecting the different PL properties of these two types of NCs. We argue that the difference in their Coulomb interaction energies is one of the main reasons for their distinct PL properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure/Function Implications in a Dynamic Complex of the Intrinsically Disordered Sic1 with the Cdc4 Subunit of an SCF Ubiquitin Ligase

Intrinsically disordered proteins can form highly dynamic complexes with partner proteins. One such dynamic complex involves the intrinsically disordered Sic1 with its partner Cdc4 in regulation of yeast cell cycle progression. Phosphorylation of six N-terminal Sic1 sites leads to equilibrium engagement of each phosphorylation site with the primary binding pocket in Cdc4, the substrate recognition subunit of a ubiquitin ligase. ENSEMBLE calculations using experimental nuclear magnetic resonance and small-angle X-ray scattering data reveal significant transient structure in both phosphorylation states of the isolated ensembles (Sic1 and pSic1) that modulates their electrostatic potential, suggesting a structural basis for the proposed strong contribution of electrostatics to binding. A structural model of the dynamic pSic1-Cdc4 complex demonstrates the spatial arrangements in the ubiquitin ligase complex. These results provide a physical picture of a protein that is predominantly disordered in both its free and bound states, enabling aspects of its structure/function relationship to be elucidated.

59 BASIC BIOLOGICAL SCIENCES↗