Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SIZE DETERMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Test and evaluation of Apollo 14 composite casting demonstration specimens 6, 9, and 12, phase 1

Flight and control specimens 6, 9, and 12 from the Apollo 14 composite casting demonstration were evaluated with respect to the degree of dispersion achieved for mixtures of immiscible materials under one-gravity and low gravity environments. The flight and control capsules 6, 9, and 12 contained paraffin and sodium acetate; paraffin, sodium acetate and argon; and paraffin, sodium acetate and 100 micrometer diameter tungsten microspheres, respectively. The evaluation and documentation utilized photographic and microstructure examinations, density measurements, and droplet size and distribution determinations. In addition, theoretical analyses were performed in order to aid in the understanding of the fluid behavior of the specimens during processing and subsequent solidification. A comparison of evaluated data with the theoretical analyses reveals that although the immiscible materials were uniquely dispersed in a low gravity environment, nonuniform dispersions were obtained primarily due to insufficient initial mixing and an essentially unidirectional thermal gradient during cooldown.

Reger, J. L.↗

Effect of residual stresses induced by prestressing on rolling element fatigue life

A mechanical prestress cycle suitable to induce compressive stress beneath the surface of the inner race of radially loaded 207-size bearings was determined. Compressive residual stress in excess 0.69 x 10 to the 9th power N/sq m (100,000 psi), as measured by X-ray diffraction, were induced at the depth of maximum shearing stress. The prestress cycle consisted of running the bearings for 25 hours at 2750 rpm at a radial load which produced a maximum Hertz stress of 3.3 x 10 to the 9th power N/sq m (480,000 psi) at the contact of the inner race and the heaviest loaded ball. Bearings subjected to this prestress cycle and subsequently fatigue tested gave a 10 percent fatigue life greater than twice that of a group of baseline bearings.

Parker, R. J.↗

Parathyroid hormone - Secretion and metabolism in vivo.

Gel filtration and radioimmunoassay were used to determine the molecular size and immunochemical reactivity of parathyroid hormone present in gland extracts, in the general peripheral circulation, and in parathyroid effluent blood from patients with hyperparathyroidism, as well as from calves and from cattle. It was found that parathyroid hormone secreted from the parathyroids in man and cattle is at least as large as the molecule extracted from normal bovine glands. However, once secreted into the circulation the hormone is cleaved, and one or more fragments, immunologically, dissimilar to the originally secreted hormone, constitute the dominant form of circulating immunoreactive hormone.

Habener, J. F.↗

An exploratory study of the microstructure of mullite fibers

Mullite fibers of three compositions, ranging from SiO2-rich to Al2O3-rich, were investigated by a number of transmission electron microscopy (TEM) techniques. The fibers were examined in the as-received condition and after subjecting them to thermal exposures as high as 142 C. The investigative techniques used included direct TEM of microtomed sections of mounted fibers and TEM of replicas of polished, chemically etched, and cathodically etched fibers. In addition, X-ray diffraction line broadening analyses was used for determining average crystallite size. A preliminary description of the microstructure of mullite fibers is given.

Santoro, G. J.↗

Orbital mapping of the lunar magnetic field.

Examination of the lunar magnetic field as deduced from the orbital magnetometer data, with major emphasis on the general mapping of the lunar field over the orbit track of the Apollo 15 subsatellite. A detailed analysis of the data from a series of overflights of the Van de Graaff region at two different altitudes is also presented. This latter set of data makes it possible to determine the scale size of the region and the contrast between the remanent magnetization associated with the magnetic feature and its surroundings. The low altitude data from the Apollo 16 subsatellite, just prior to its impact into the lunar surface, are then examined. Data obtained while the moon was in the solar wind are used to construct a map which shows the lunar limb regions associated with the detection of limb compressions. This map is used to make qualitative inferences concerning the lunar remanent field in regions not covered by the contour maps.

Sharp, L. R.↗

Growth and development in inert non-aqueous liquids

A preview is presented of the survival and growth capabilities of higher plants in non-aqueous, inert liquids. The two media which were used are mineral (white) oil and fluorochemical inert liquid FC-75. Both liquids dissolve oxygen and carbon dioxide readily, but are insoluble in water. Consequently, plants submerged in these liquids are capable of gas exchange with the atmosphere, but possess a water impermeable coating the dimensions of which are determined by the size of the liquid holding container. In a sense, growing plants in a tank of mineral oil imparts on them a cuticle. Plants plus prescribed volumes of water were innoculated into mineral oil. Organisms with minimal water supplied could then be observed. Also, submersed plants covered with an oil slick were shown to be capable of growth in dessicating atmospheres.

Siegel, S. M.↗

Blade Design

The design of turbine blading is considered that will produce the flow angles and velocities required by velocity diagrams consistent with the desired efficiency and/or number of stages. The determination of the size, shape, and spacing of the blades is fundamental.

Warner L Stewart↗

Parameters critical to the morphology of fluidization craters

In order to study further the role of fluidization on the moon, a laboratory investigation was undertaken on two particulate material size fractions to determine the effect of variables, such as, duration of gas streaming, gas pressure, and 'regolith' thickness on the morphology of fluidization craters. A 3.175-mm cylindrical vent was used to simulate a gas streaming conduit. Details of the fluidization chamber are discussed together with questions of experimental control, aspects of nomenclature, crater measurements, and the effect of variables.

Siegal, B. S.↗

Ferromagnetic phases of lunar fines and breccias - Electron magnetic resonance spectra of Apollo 16 samples

Electron magnetic resonance measurements have been made at 9 GHz and at temperatures from 1.2 to 400 K and 35 GHz (300 K) on samples of fines and breccias from Apollo 11-16. Unsorted Apollo 16 fines (less than 1 mm) have Delta H (average) = 580 G and specific intensities that have the same range as fines from the other Apollo collections. The magnetic properties of the 'characteristic' resonance are not in accord with those of iron particles. On the bases of the properties of the 'characteristic' resonance as a function of temperature and Apollo site, laboratory heat treatments on synthetic materials and lunar crystalline rocks and a comparison with the 'characteristic' resonance of the resonance spectra of breccia specimens for which iron particle sizes have been determined from other measurements, it is suggested that some fraction (about 20%) of the 'characteristic' resonance is due to sub-micron particles of ferric oxide phases.

Weeks, R. A.↗

Scramjet nozzle design and analysis as applied to a highly integrated hypersonic research airplane

The configuration and performance of the propulsion system for the hypersonic research vehicle are discussed. A study of the interactions between propulsion and aerodynamics of the highly integrated vehicle was conducted. The hypersonic research vehicle is configured to test the technology of structural and thermal protection systems concepts and the operation of the propulsion system under true flight conditions for most of the hypersonic flight regime. The subjects considered are: (1) research vehicle and scramjet engine configurations to determine fundamental engine sizing constraints, (2) analytical methods for computing airframe and propulsion system components, and (3) characteristics of a candidate nozzle to investigate vehicle stability and acceleration performance.

Small, W. J.↗

Dry heat effects on survival of indigenous soil particle microflora and particle viability studies of Kennedy Space Center soil

Research efforts were concentrated on attempts to obtain data concerning the dry heat resistance of particle microflora in Kennedy Space Center soil samples. The in situ dry heat resistance profiles at selected temperatures for the aggregate microflora on soil particles of certain size ranges were determined. Viability profiles of older soil samples were compared with more recently stored soil samples. The effect of increased particle numbers on viability profiles after dry heat treatment was investigated. These soil particle viability data for various temperatures and times provide information on the soil microflora response to heat treatment and are useful in making selections for spacecraft sterilization cycles.

Ruschmeyer, O. R.↗

Phobos - Control network analysis

Initial analysis of the Mariner 9 high resolution pictures of Phobos surface features has been completed. A control network of 38 landmarks has been established and used to determine the physical size, shape, orientation, libration, and topography properties of Phobos. The results verified the synchronous rotation of Phobos and revealed a libration of approximately 5 deg in the orbit plane of Phobos. A preliminary map of Phobos, based on the control network analysis, is given.

Duxbury, T. C.↗

Mariner 9 - An instrument of dynamical science

We review and evaluate the contributions of Mariner 9 in improving our knowledge of the dynamical characteristics of Mars and its two satellites, Phobos and Deimos. Primary results include the discovery of the large gravitational and topographical bulge in the Tharsis region, the development of a detailed gravity model representable as coefficients in a spherical harmonic expansion, the development of a topographic model exhibiting a three kilometer displacement of the center of figure from the center of mass, and the determination of the size, shape and motion of Phobos and Deimos.

Jordan, J. F.↗

Direction-finding measurements of type 3 radio bursts out of the ecliptic plane

Direction-finding measurements with the plasma wave experiments on the HAWKEYE 1 and IMP 8 satellites are used to find the source locations of type 3 solar radio bursts in heliocentric latitude and longitude in a frequency range from 31.1 kHz to 500 kHz. Using an empirical model for the emission frequency as a function of radial distance from the sun the three-dimensional trajectory of the type 3 radio source can be determined from direction-finding measurements at different frequencies. Since the electrons which produce these radio emissions follow the magnetic field lines from the sun these measurements provide information on the three-dimensional structure of the magnetic field in the solar wind. The source locations projected into the ecliptic plane follow an Archimedian spiral. Perpendicular to the ecliptic plane the source locations usually follow a constant heliocentric latitude. With direction-finding measurements of this type it is also possible to determine the source size from the modulation factor of the received signals.

Baumback, M. M.↗

A methodology for small scale rural land use mapping in semi-arid developing countries using orbital imagery. Part 6: A low-cost method for land use mapping using simple visual techniques of interpretation

The author has identified the following significant results. It was found that color composite transparencies and monocular magnification provided the best base for land use interpretation. New methods for determining optimum sample sizes and analyzing interpretation accuracy levels were developed. All stages of the methodology were assessed, in the operational sense, during the production of a 1:250,000 rural land use map of Murcia Province, Southeast Spain.

Vangenderen, J. L.↗

Digital computer processing of peach orchard multispectral aerial photography

Several methods of analysis using digital computers applicable to digitized multispectral aerial photography, are described, with particular application to peach orchard test sites. This effort was stimulated by the recent premature death of peach trees in the Southeastern United States. The techniques discussed are: (1) correction of intensity variations by digital filtering, (2) automatic detection and enumeration of trees in five size categories, (3) determination of unhealthy foliage by infrared reflectances, and (4) four band multispectral classification into healthy and declining categories.

Atkinson, R. J.↗

How big is a windmill - Glauert revisited

The obvious similarities to propellers and helicopter rotors suggest that helicopter technology might be used to improve wind generator performance, perhaps including development of a windmill airfoil. In a back-to-basics approach, this paper reviews the analyses of Glauert to determine basic size-power relations. The energy method of Wheatley developed for helicopter/auto-gyro performance prediction is then incorporated into the basic theory. Equations and charts are presented showing ratios of power output to the ideal power capability as functions of mean blade lift and drag coefficients, solidity and rotor tip speed ratio. It is found there is little possibility for improved performance by using improved airfoils. The basic assumptions of the Glauert theory are reviewed and means are suggested for achieving the basic power capability indicated by momentum theory.

Mccloud, J. L., III↗