Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAMPLE PREPARATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Study of gadolinia-doped ceria solid electrolyte surface by XPS

Gadolinia-doped ceria (CGO) is an important material to be used as electrolyte for solid oxide fuel cell for intermediate temperature operation. Ceria doped with 10 mol% gadolinia (Ce{sub 0.9}Gd{sub 0.1}O{sub 1.95}) was prepared by conventional solid state synthesis and found to be single phase by room temperature X-ray diffraction (XRD). The chemical states of the surface of the prepared sample were analyzed by X-ray photoelectron spectroscopy (XPS). Though Gd was present in its characteristic chemical state, Ce was found in both Ce{sup 4+} and Ce{sup 3+} states. Presence of Ce{sup 3+} state was ascribed to the differential yield of oxygen atoms in the sputtering process.

36 MATERIALS SCIENCE↗

Longitudinal and concurrent dimensional changes of cellulose aggregate fibrils during sorption stages

Atomic force microscopy (AFM) studies of the dimensional changes of cellulose microfibril materials, called cellulose aggregate fibrils (approx. 100 {mu}m x 3 {mu}m x 300 nm), exposed to two distinct relative humidities of 80% and 23% for 24 h and then suddenly subjected to 50% RH and 23 deg. C show that the fibrils are responsive to the surrounding environments in a nonspecific fashion. AFM images (10 {mu}m x 10 {mu}m) of the individual straight cellulose aggregate fibrils were taken as a function of elapsed time during both desorption and adsorption of moisture. The longitudinal distance between discrete natural defects observed on the cellulose aggregate fibrils as well as the width, cross-sectional area, and height of the cellulose aggregate fibril were measured from the AFM images. The length of the cellulose aggregate fibrils was found to have reduced after exposure to either high or low relative humidity, and then placement in ambient conditions. Over time in ambient conditions, the cellulose aggregate fibrils progressively relaxed to their original length during both desorption and adsorption of moisture. However, the relaxation rate during adsorption was faster than that during desorption. The possible explanations for this phenomenon are discussed including the sample preparation method, volume conservation, entropy elasticity, and free volume theory. The changes in the width, height, and cross-sectional area are also discussed.

36 MATERIALS SCIENCE↗

Urchin-like m-LaVO{sub 4} and m-LaVO{sub 4}/Ag microspheres: Synthesis and characterization

The semiconductor nanostructures decorated with noble metals have attracted increasing attention due to their interesting physical and chemical properties. In this work, urchin-like monoclinic (m-) LaVO{sub 4} microspheres were prepared by a hydrothermal method and used as a template to fabricate Ag nanoparticle-decorated m-LaVO{sub 4} composites. The morphology and structure were characterized by transmission electron microscope, high-resolution transmission electron microscope, scanning electron microscope, and energy-dispersive X-ray. It was found that Ag nanoparticles with narrow size distribution were uniformly loaded on urchin-like m-LaVO{sub 4} microspheres, and the resulted composite microspheres showed distinct surface plasmon absorption band compared to pure m-LaVO{sub 4} microspheres. Photocatalytic activities of as-prepared samples were examined by studying the degradation of methyl orange solutions under visible-light irradiation (> 400 nm). Results clearly showed that urchin-like m-LaVO{sub 4}/Ag microspheres possess much higher photocatalytic activity than pure m-LaVO{sub 4} microspheres and P25. - Highlights: • m-LaVO{sub 4}/Ag composites microspheres were fabricated by a hydrothermal method. • m-LaVO{sub 4} microspheres show higher photocatalytic activity than m-LaVO{sub 4} microspheres. • m-LaVO{sub 4}/Ag microspheres exhibit a good stability.

36 MATERIALS SCIENCE↗

Novel Y doped Bi{sub 2}WO{sub 6} photocatalyst: Hydrothermal fabrication, characterization and enhanced visible-light-driven photocatalytic activity for Rhodamine B degradation and photocurrent generation

Visible-light-driven (VLD) Yttrium (Y) ion doped Bi{sub 2}WO{sub 6} photocatalyst has been synthesized via a facile hydrothermal route. Incorporation of Y{sup 3} {sup +} into Bi{sub 2}WO{sub 6} lattice was successfully confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and ICP analysis. The microstructure and optical property of the as-prepared samples have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption isotherm and UV–vis diffuse reflectance spectra (DRS). The photocatalytic experiments indicated that the Y-Bi{sub 2}WO{sub 6} showed a much higher photocatalytic activity than the pristine Bi{sub 2}WO{sub 6} for the degradation of Rhodamine B (RhB) and photocurrent (PC) generation. This enhancement should be ascribed to the slightly increased band gap and the generated defects by Y{sup 3} {sup +} doping, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Such a process was verified by the photoluminescence (PL) spectroscopy. In addition, the active species trapping experiments indicated that holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) play important roles in the photocatalytic reaction. - Highlights: • Novel Y-Bi{sub 2}WO{sub 6} photocatalyst has been synthesized by a facile hydrothermal route. • Y-Bi{sub 2}WO{sub 6} exhibits a much higher photocatalytic activity than pristine Bi{sub 2}WO{sub 6}. • Holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) are the two main active species. • Y{sup 3} {sup +} ion can result in a low recombination of photogenerated electron and hole.

36 MATERIALS SCIENCE↗

Synthesis and characterization of bulk Cu{sub 2}ZnSnX{sub 4} (X: S, Se) via thermodynamically supported mechano-chemical process

Materials with the general formula, Cu{sub 2}ZnSnX{sub 4} (CZTX; X: Group 16 elements), with X being S/Se, have been receiving considerable attention due to their utility as an absorber layer in solar photovoltaics (PV). This paper reports on the synthesis of CZTSe and CZTS nanocrystalline powders at low temperatures, starting from elemental metal and chalcogen powders, via the low cost, scalable technique of ball milling. The prepared samples were well characterized using the different characterization tools. XRD, Raman, SEM and TEM studies confirm the formation of single-phase, stoichiometric, nano-crystalline kesterite CZTS and CZTSe powders. The low temperature phase selection of the complex quaternary compound in this system is seen as a direct consequence of the thermodynamic facilitation, coupled with the capability of mechano-chemical synthesis to aid in overcoming kinetic constraints. The optical bandgap of the various samples of CZTS was observed in the range of 1.4–1.6 eV and corresponding values for CZTSe was observed to be in the range of 1.08–1.18 eV. Our work provides a pathway for developing cheap, scalable, and ink-based techniques for low cost solar PV. - Graphical abstract: Display Omitted - Highlights: • A scalable route for synthesis of near phase pure CZTS/Se nano-crystals has been demonstrated. • Stoichiometric CZTS and CZTSe were synthesized via mechano-chemical synthesis route. • Synthesis at near room temperature is supported by thermodynamic calculations.

36 MATERIALS SCIENCE↗

Microstructural characterization of Charpy-impact-tested nanostructured bainite

In this work, a possible cause of the extraordinary low impact toughness of nanostructured bainite has been investigated. The microstructure of nanostructured bainite consisted chiefly of carbide-free bainitic ferrite with retained austenite films. X-ray diffractometry (XRD) measurement indicated that no retained austenite existed in the fractured surface of the Charpy-impact-tested specimens. Fractographs showed that cracks propagated mainly along bainitic ferrite platelet boundaries. The change in microstructure after impact loading was verified by transmission electron microscopy (TEM) observations, confirming that retained austenite was completely transformed to strain-induced martensite during the Charpy impact test. However, the zone affected by strained-induced martensite was found to be extremely shallow, only to a depth of several micrometers from the fracture surface. It is appropriately concluded that upon impact, as the crack forms and propagates, strain-induced martensitic transformation immediately occurs ahead of the advancing crack tip. The successive martensitic transformation profoundly facilitates the crack propagation, resulting in the extremely low impact toughness of nanostructured bainite. Retained austenite, in contrast to its well-known beneficial role, has a deteriorating effect on toughness during the course of Charpy impact. - Highlights: • The microstructure of nanostructured bainite consisted of nano-sized bainitic ferrite subunits with retained austenite films. • Special sample preparations for SEM, XRD and TEM were made, and the strain-affected structures have been explored. • Retained austenite films were found to transform into martensite after impact loading, as evidenced by XRD and TEM results. • The zone of strain-induced martensite was found to extend to only several micrometers from the fracture surface. • The poor Charpy impact toughness is associated with the fracture of martensite at a high strain rate during impact loading.

36 MATERIALS SCIENCE↗

A stable and highly efficient visible-light-driven hydrogen evolution porous CdS/WO3/TiO2 photocatalysts

Highlights: • Highly efficient and stable photocatalytic activity of CdS/WO{sub 3}/TiO{sub 2} photocatalysts were synthesized by a two-step method. • CdS and WO{sub 3} inlaid on porous TiO{sub 2} can extend the light absorption and enhance photogenerated electron-hole pairs separation. • The porous structure can provide more reaction active sites and improve photoproduced-electrons and holes transport speed. - Abstract: It is well known that both catalytic efficiency and stability are the two important parameters of photocatalysts for visible-light-driven hydrogen production reactions. However, light-driven hydrogen evolution based applications still suffer from sluggish reaction kinetics due to the lack of high-performance photocatalysts. In this paper, we successfully synthesized a ternary porous CdS/WO{sub 3}/TiO{sub 2} photocatalyst with high efficiency and stability via two-stage approach. The as-prepared samples are characterized by XRD, FESEM, EDS, TEM, XPS, and UV–Vis, respectively, which illustrated that the CdS and WO{sub 3} moieties are in-situ formed inside the porous TiO{sub 2}. Particularly, the photocatalytic hydrogen (H{sub 2}) evolution rate of such ternary 8% CdS/WO{sub 3}/TiO{sub 2} (molar ration of CdS:WO{sub 3}:TiO{sub 2} = 8:8:100) photocatalyst ranges up to 2106 μmol h{sup −1} g{sup −1} under visible-light irradiation, which is higher than that of pure TiO{sub 2} and other binary (CdS/TiO{sub 2} and WO{sub 3}/TiO{sub 2}) porous photocatalysts. The superior H{sub 2} evolution efficiency can be attributed to the coexistence of CdS and WO{sub 3} in porous TiO{sub 2} which can promote the interfacial charge transfer and separation as well as extend the light absorption up to the visible range.

36 MATERIALS SCIENCE↗

Synergistic Effects of Molten Salt Corrosion and Proton Irradiation on Grain Boundary Strength in Ni-20Cr

Nickel-based alloys are leading contenders for use as structural materials in molten salt reactors. While there have been extensive studies on the impact of fluoride/chloride-based molten salt corrosion on the microstructural evolution of various nickel-based alloys, the effects of simultaneous molten salt corrosion and radiation on the mechanical integrity of grain boundaries (GBs) remain underexplored. In this study, we use a Ni-20Cr model alloy to investigate this issue, subjecting it to simultaneous molten fluoride salt corrosion and proton irradiation. We performed cross-sectional and chemically-sensitive electron microscopy characterization of the microstructures of these materials, identifying the characteristic corrosion-induced microstructure and local chemical heterogeneity near GBs. After developing a sample preparation method for reliable characterization of GB strength, we assess the mechanical degradation of GBs using in situ push-to-pull micro tensile tests. Our findings reveal that voids induced by corrosion are the primary influence on the failure mode of GBs, regardless of whether proton irradiation is present. For materials that exhibit ductile fracture, those subjected to simultaneous corrosion and radiation exhibit lower yield strengths than those exposed to corrosion alone, which may be linked to the previously observed phenomenon of proton irradiation-decelerated intergranular corrosion in molten salt.

36 - MATERIALS SCIENCE↗

Preparation and characterization of low-temperature expandable graphite

The low-temperature expandable graphite was successfully prepared with perchloric acid, phosphoric acid and KMnO{sub 4} by chemical process. The optimum weight ratio of perchloric acid to phosphoric acid in mixed acid was 1:0.2, and the weight ratio of the mixed acid, KMnO{sub 4} and natural flake graphite was preferably 1.5:0.1:1. The expanded volume can reach 260 mL/g at a relatively low temperature of 300 deg. C. Meanwhile, the prepared samples were characterized by means of Fourier transform infrared, thermogravimetry-differential scanning calorimetry and X-ray diffraction.

36 MATERIALS SCIENCE↗

Crystallite, optical and photocatalytic properties of visible-light-driven ZnIn{sub 2}S{sub 4} photocatalysts synthesized via a surfactant-assisted hydrothermal method

A series of ZnIn{sub 2}S{sub 4} photocatalysts were synthesized via a surfactant-assisted hydrothermal method. The products were characterized with X-ray diffraction (XRD), UV-vis-near-IR diffuse reflectance spectra (UV-vis), photoluminescence spectra (PL) and field emission scanning electron microscope (FESEM). The results indicated that the CTAB-assisted ZnIn{sub 2}S{sub 4} product had a wider band gap than the other three ZnIn{sub 2}S{sub 4} products (CPBr-assisted, SDS-assisted and no-surfactant-assisted ZnIn{sub 2}S{sub 4}). The surfactant (especially CTAB) addition would greatly affect the crystal structure (i.e. d(0 0 6) along the c-axis) of ZnIn{sub 2}S{sub 4}. The photocatalytic activities of the as-prepared samples were evaluated by photocatalytic hydrogen production from water under visible light irradiation. The CTAB-assisted ZnIn{sub 2}S{sub 4} product, with quantum yield (420 nm) determined to be 11.9%, had a much higher photocatalytic activity than the other three ZnIn{sub 2}S{sub 4} products in our photocatalytic system. The energy conversion efficiency in the whole visible light region was determined to be 3.1% for the CTAB-assisted ZnIn{sub 2}S{sub 4} photocatalyst.

36 MATERIALS SCIENCE↗

A novel broadband emission phosphor Ca{sub 2}KMg{sub 2}V{sub 3}O{sub 12} for white light emitting diodes

A novel broadband emission phosphor Ca{sub 2}KMg{sub 2}V{sub 3}O{sub 12} was first synthesized by solution combustion method. The X-ray diffraction showed that Ca{sub 2}KMg{sub 2}V{sub 3}O{sub 12} phase can be obtained at 600-900 {sup o}C through combustion route. The crystal structure of this material was refined by Rietveld method using powder X-ray diffraction. It crystallizes in cubic system and belongs to space group Ia3d with z = 8, a = 0.12500 nm. The excitation band of Ca{sub 2}KMg{sub 2}V{sub 3}O{sub 12} peaks at 320 nm in a region between 260 nm and 425 nm, and the emission spectrum exhibits an intense band centered at about 528 nm covering from 400 nm to 800 nm. The colour coordinates of samples prepared at different ignition temperatures are in a range of x = 0.323-0.339, y = 0.430-0.447.

36 MATERIALS SCIENCE↗

Morphology-controlled synthesis of ZnS nanostructures via single-source approaches

ZnS nanoparticles of various morphologies, including hollow or solid spherical, and polyhedral shape, were synthesized from single-source precursor Zn(S{sub 2}COC{sub 2}H{sub 5}){sub 2} without using a surfactant or template. The as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy. The results indicate that ZnS hollow and solid spheres assembled by nanoparticles can be easily generated by the solution phase thermalysis of Zn(S{sub 2}COC{sub 2}H{sub 5}){sub 2} at 80 {sup o}C using N, N-dimethylformamide (DMF) and ethylene glycol (EG) or water as solvents, respectively, whereas solvothermal process of the same precursor led to ZnS nanoparticles of polyhedral shape with an average size of 120 nm. The optical properties of these ZnS nanostructures were investigated by room-temperature luminescence and UV-vis diffuse reflectance spectra.

36 MATERIALS SCIENCE↗

Structural and optical studies of yttrium oxide nanoparticles synthesized by co-precipitation method

Yttrium oxide (yttria) nanoparticles were successfully synthesized by co-precipitation method. As-synthesized and annealed powders were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), UV-visible (UV-vis), photoluminescence (PL) spectra and Fourier transform infrared spectrometer (FTIR). The XRD results show that the as-prepared sample has mixed phase of Y(OH){sub 3} and yttria (Y{sub 2}O{sub 3}). However, cubic yttrium oxide phase alone is found for annealed samples. The strain values are calculated from Williamson-Hall (W-H) plot for annealed samples. SEM and TEM micrographs show that the samples are composed of aggregated nanoparticles with different shapes and sizes. From the UV-vis spectra, it is found that the position of the absorption peak is shifted towards the lower wavelength side when particle size decreases. In the PL spectra, the broad emission bands are observed between 340 and 380 nm and the presence of metal oxide is confirmed by FTIR spectra.

36 MATERIALS SCIENCE↗

Solvothermal synthesis of vanadium phosphates in the form of xerogels, aerogels and mesostructures

Regularities and peculiarities of physicochemical changes, first of all phase transformations, during solvothermal treatment (with conventional and microwave heating) of the vanadium pentoxide and orthophosphoric acid mixture in organic solvents in the presence of reducing agents have been studied. Hemihydrate of vanadium hydrophosphate - the precursor of vanadium pyrophosphate, the active phase for n-butane to maleic anhydride oxidation, and ion exchanger with variable physicochemical characteristics, i.e. crystal structure, specific surface area, crystallite size and acidic properties - has been synthesized in the temperature range 170-200 {sup o}C. The obtained phases were examined using XRD, DTA-TG, SEM, FTIR spectroscopy, nitrogen adsorption as well as gas chromatographic determination of acidity through organic bases adsorption. The catalytic activity of prepared samples for n-butane oxidation has been investigated.

36 MATERIALS SCIENCE↗

Preparation of bismuth oxyiodides and oxides and their photooxidation characteristic under visible/UV light irradiation

Bismuth oxyiodides and oxides were prepared by a solution combination with thermal treatment method. The prepared samples were characterized by X-ray diffraction, thermogravimetry, scanning electron microscopy, transmission electron microscopy, and UV-vis diffuse reflectance spectra, and Brunauer-Emmett-Teller surface areas. The photooxidation activity of the samples was evaluated by photocatalytic decolorization of acid orange II under both visible light ({lambda} > 420 nm) and UV light ({lambda} = 365 nm) irradiation. Results show that a series of changes in the compounds take place during the course of calcination, described as: BiOI {yields} Bi{sub 5}O{sub 7}I {yields} {alpha}-Bi{sub 2}O{sub 3}. Under visible light irradiation, the photocatalytic activities follow the order: BiOI > Bi{sub 5}O{sub 7}I > Bi{sub 5}O{sub 7}I/Bi{sub 2}O{sub 3} mixture > Bi{sub 2}O{sub 3}, which is mainly attributed to the different absorption ability to visible light due to the different band gap energy; the activities are in the order: BiOI < Bi{sub 2}O{sub 3} < Bi{sub 5}O{sub 7}I/Bi{sub 2}O{sub 3} mixture < Bi{sub 5}O{sub 7}I under UV light irradiation, which is mainly caused by the different oxidability.

36 MATERIALS SCIENCE↗

Preparation N-F-codoped TiO{sub 2} nanorod array by liquid phase deposition as visible light photocatalyst

Research highlights: {yields} The formation of N, F-codoped TiO{sub 2} nanorod arrays via the LPD. {yields} Calcination temperature greatly effects the incorporation of N and F into TiO{sub 2}. {yields} TNRAs calcined at 450 {sup o}C showed highest visible light photocatalytic activity. {yields} A synergetic effect of 1D nanorod arrays and appropriate amount of N and F codoping. -- Abstract: An efficient method for the preparation of N-F-codoped visible light active TiO{sub 2} nanorod arrays is reported. In the process, simultaneous nitrogen and fluorine doped TiO{sub 2} nanorod arrays on the glass substrates were achieved by liquid phase deposition method using ZnO nanorod arrays as templates with different calcination temperature. The as-prepared samples were characterized by Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectra measurements. It was found that calcination temperature is an important factor influencing the microstructure and the amount of N and F in TiO{sub 2} nanorod arrays samples. The visible light photocatalytic properties were investigated using methylene blue (MB) dye as a model system. The results showed that N-F-codoped TiO{sub 2} nanorod arrays sample calcined at 450 {sup o}C demonstrated the best visible light activity in all samples, much higher than that of TiO{sub 2} nanoparticles and P25 particles films.

36 MATERIALS SCIENCE↗

{gamma}-MnS nano and micro architectures: Synthesis, characterization and optical properties

Highlights: {yields} In this article we have reported the formation of {gamma}-MnS nano/microcrystalline material by a novel proposed route. Na{sub 2}[Mn(HL){sub 2}(H{sub 2}O){sub 2}]; 1:2 (M:L) chelate complex was synthesized in the first step by our previously reported method. The chelate complex precursor was subsequently decomposed by alkaline solution of thiocarbamide, resulting formation of {gamma}-MnS crystals in situ. {yields} The effect of reaction time and surfactant have been observed and discussed. The materials were characterized for crystallanity and morphology by SEM, TEM, XRD, UV-Vis, PL spectra and the results are thoroughly discussed. {yields} {gamma}-MnS crystals were formed when metal complex was used as metal source whereas Mn{sub 3}O{sub 4} was the dominant product when MnSO{sub 4}.H{sub 2}O was used as metal source. {yields} We have also proposed a plausible formation mechanism based on experimental evidence, analyses and previous reports. {yields} Optical property of the material has also been discussed in the present article. -- Abstract: {gamma}-MnS nanocrystalline materials have been prepared by reaction of Na{sub 2}[Mn(HL){sub 2}(H{sub 2}O){sub 2}]; 1:2 (M:L) chelate complex with alkaline solution of thiocarbamide in aqueous solution phase. Effect of metal chelate complex, reaction time and surfactant sodium dodecyl sulfate; SDS on phase, morphology and size of the products have been investigated. The metal chelate complex was synthesized by reacting Mn(II) ions with eriochrome black T (NaH{sub 2}L) in alkaline medium. {gamma}-MnS crystals were formed when metal complex was used as metal source whereas Mn{sub 3}O{sub 4} was the dominant product when MnSO{sub 4}.H{sub 2}O was used as metal source. Materials thus formed having various morphologies were characterized by X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM) to determine the crystallinity, phase, structure and morphology. The optical properties of the thus prepared samples were determined by UV-vis absorption spectra and photoluminescence spectra. A possible formation mechanism of crystals has been discussed in this article.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled synthesis of mesoporous {alpha}-Fe{sub 2}O{sub 3} nanorods and visible light photocatalytic property

Graphical abstract: Porous {alpha}-Fe{sub 2}O{sub 3} nanorods were prepared by a facile hydrothermal process of Fe(NO{sub 3}){sub 3}{center_dot}9H{sub 2}O in NaOH aqueous solution combined with calcination method. The rod structure can be well controlled via NaOH quantity and exhibits a high BET surface area of 105.1 m{sup 2} g{sup -1}. The as-obtained porous {alpha}-Fe{sub 2}O{sub 3} nanorods show good reusability and superior visible-light photocatalytic activity in degradation of MB compared to hematite nanoparticles and microplates. Considering the excellent photocatalytic activity, recycling stability, and facile preparation method, the porous {alpha}-Fe{sub 2}O{sub 3} nanorods are believed to have potential application in the field of photocatalysis. Highlights: Black-Right-Pointing-Pointer Porous {alpha}-Fe{sub 2}O{sub 3} nanorods with typical pore size of 2-4 nm were controlled prepared. Black-Right-Pointing-Pointer The porous {alpha}-Fe{sub 2}O{sub 3} nanorods exhibit a high BET surface area of 105.1 m{sup 2} g{sup -1} and a pore volume of 0.13 m{sup 3} g{sup -1}. Black-Right-Pointing-Pointer It exhibits excellent visible-light photocatalytic activity and reusability in degradation of MB, in comparison to {alpha}-Fe{sub 2}O{sub 3} nanoparticles and platelets. -- Abstract: Porous {alpha}-Fe{sub 2}O{sub 3} nanorods with typical pore size of 2-4 nm were controlled prepared by a facile hydrothermal process of Fe(NO{sub 3}){sub 3}{center_dot}9H{sub 2}O aqueous solution in the presence of NaOH, followed by a calcination treatment. Contrast experiments indicate that the morphology and crystalline structure of the hydrothermal products depend greatly on the quantity of NaOH. Hematite nanoparticles and microplates were respectively obtained under conditions without or with excess NaOH. The porous {alpha}-Fe{sub 2}O{sub 3} nanorods exhibit a high BET surface area of 105.1 m{sup 2} g{sup -1} and a pore volume of 0.13 m{sup 3} g{sup -1}. UV-vis measurement shows wide absorption to visible light and an obvious blue-shift of the adsorption edge due to the quantum size effect. The visible-light photocatalytic performances of the as-prepared samples were evaluated by photocatalytic decolorization of methylene blue at ambient temperature. The results indicate that the photocatalytic activity of the porous {alpha}-Fe{sub 2}O{sub 3} nanorods is superior to hematite nanoparticles and platelets and exhibit good reusable feature. The photocatalytic process of porous structure is determined to be pseudo-first-order reaction with apparent reaction rate constant of 1.04 Multiplication-Sign 10{sup -2} min{sup -1}. And the optimum photocatalyst dosage is 20 mg per 100 mL of dye solution. The porous {alpha}-Fe{sub 2}O{sub 3} nanorods are considered potential photocatalyst for practical application due to the excellent photocatalytic behavior and good reusability.

36 MATERIALS SCIENCE↗