Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Structural uncertainty assessment for fire-engulfed objects in crosswind: Establishing credibility for a multiphysics wall-modeled large-eddy simulation paradigm

A structural uncertainty validation study for a large-scale, fire-engulfed, elevated object subjected to crosswind is presented to establish the credibility of a high-fidelity, low-Mach, turbulent reacting flow wall-modeled large-eddy simulation (WMLES) approach that includes multiphysics coupling to participating media radiation and conjugate heat transfer. To establish that WMLES can accurately predict surface quantities including drag and pressure coefficient in the low-Mach crosswind regime, a foundational elevated isothermal cylinder validation case is presented at a similar gap-to-diameter ratio of 0.25, spanning the subcritical to supercritical drag regime (Re 𝐷 = 1.1 × 10 5 and 4.3 × 10 5 , respectively). Here, this study exercised both static and dynamic coefficient LES (Smagorinsky and 𝑘 sgs ) with both local and exchange-based velocity sampling. Results showcase that the drag crisis (or the sudden drop in drag coefficient at increased Re 𝐷 ) is well captured when using an exchange-based dynamic coefficient WMLES methodology, while noting lack of mesh convergence and overall drag and pressure coefficient predictively when using a static coefficient, local velocity sampling WMLES. For the 𝒪⁡(10) m JP-8 liquid pool fire crosswind validation study presented, two experimental crosswind configurations (2 m/s and 9.5 m/s) are showcased for a fire-engulfed mock fuselage roughly 4 m in diameter. Using the best model-form practices identified in the isothermal study, dynamic coefficient 𝑘 sgs exchange-based WMLES fire validation findings demonstrate accurate peak irradiation and skin temperature predictions as a function of crosswind magnitude. Excessive yaw in the low-crosswind fuselage configuration, consistent with experimental findings, captured a significant predicted asymmetry in flame attachment and heat flux toward the downwind cylindrical cap—indicative of axial vortex structures transporting the flame along the upper and lower fuselage leeward surface. All fire mesh resolution simulations captured the experimental finding that as crosswind increased, predicted flame shape and peak irradiation magnitude onto the fuselage transitioned from a windward to a leeward cylinder location due to the migration of the upper- to lower-shear fuel/air mixing layer thereby demonstrating the novelty, significance, and credibility of this high-fidelity WMLES reacting flow framework.

Domino, Stefan Paul [Sandia National Laboratories ↗

Lyapunov exponent as a metric for assessing the dynamic content and predictability of large-eddy simulations

Metrics used to assess the quality of large-eddy simulations commonly rely on a statistical assessment of the solution. While these metrics are valuable, a dynamic measure is desirable to further characterize the ability of a numerical simulation for capturing dynamic processes inherent in turbulent flows. To address this issue, a dynamic metric based on the Lyapunov exponent is proposed which assesses the growth rate of the solution separation. Specifically, this metric is applied to two turbulent flow configurations: forced homogeneous isotropic turbulence and a turbulent jet diffusion flame. First, it is shown that, despite the direct numerical simulation (DNS) and large-eddy simulation (LES) being high-dimensional dynamical systems with O(107) degrees of freedom, the separation growth rate qualitatively behaves like a lower-dimensional dynamical system, in which the dimension of the Lyapunov system is substantially smaller than the discretized dynamical system. Second, a grid refinement analysis of each configuration demonstrates that as the LES filter width approaches the smallest scales of the system the Lyapunov exponent asymptotically approaches a plateau. Third, a small perturbation is superimposed onto the initial conditions of each configuration, and the Lyapunov exponent is used to estimate the time required for divergence, thereby providing a direct assessment of the predictability time of simulations. By comparing inert and reacting flows, it is shown that combustion increases the predictability of the turbulent simulation as a result of the dilatation and increased viscosity by heat release. The predictability time is found to scale with the integral time scale in both the reacting and inert jet flows. Fourth, an analysis of the local Lyapunov exponent is performed to demonstrate that this metric can also determine flow-dependent properties, such as regions that are sensitive to small perturbations or conditions of large turbulence within the flow field. Finally, it is demonstrated that the global Lyapunov exponent can be utilized as a metric to determine if the computational domain is large enough to adequately encompass the dynamic nature of the flow.

42 ENGINEERING↗

Domain Wall Reactions in Multiple-Order Parameter Ferroelectrics

The motion of domain walls is crucial for ferroelectric switching. Conventionally, the switching dynamics is believed to be determined by the motion of one or a few low-energy domain wall types of dominant population. Here, we challenge this conventional idea in multiple-order-parameter ferroelectrics. Using hafnia as example, we show that the multiple-order-parameter nature not only provides various mobile domain walls and defectlike immobile domain walls, but also enables the domain wall reactions. In analogy with chemical reactions where substances react to form new substances, domain walls could also react to form other domain walls during switching. We identify several elementary domain wall reaction types including synthesis, decomposition, and exchange reactions. Domain walls are continually changed by these reactions during switching so that the switching behavior reflects the statistical average of many domain wall types with distinct mobility and stability. These reactions also lead to phenomenon like remanent nuclei and defect-site nucleation that facilitate switching and lower coercive field. Finally, the concept of domain wall reaction is not limited to hafnia but can be generalized to any multiple-order-parameter ferroelectric. As a result, this Letter conceptualizes domain wall reaction, expands the theory of ferroelectric switching, and suggests a practical way for defect engineering to control switching behavior.

36 MATERIALS SCIENCE↗

Characterizing Impacts of Storage Faults on HPC Applications: A methodology and insights

In recent years, the increasing complexity in scientific simulations and emerging demands for training heavy artificial intelligence models require massive and fast data accesses, which urges high-performance computing (HPC) platforms to equip with more advanced storage infrastructures such as solid-state disks (SSDs). While SSDs offer high-performance I/O, it remains unclear about the reliability challenges faced by the HPC applications under the SSD-related failures, in particular, failures resulting in data corruptions. The goal of this paper is to understand the impact of SSD-related data corruptions on the behaviors of complex HPC applications. To this end, we propose FFIS, a FUSE-based fault injection framework that systematically introduces storage faults into the application layer to model the errors originated from SSDs. FFIS is able to plant different I/O related faults into the data returned from underlying file systems, which also enables the investigation on the error resilience characteristics of the scientific file format for the first time. We demonstrate the use of FFIS with three representative real HPC applications, show how each application reacts to the data corruptions, and provide insights on the error resilience of the widely-adopted HDF5 file format for the HPC applications.

Fang, Bo↗

Fabrication of 8-Strand Rutherford Cables Using Roped Strands Made from Ultrafine Wires

Conventional Rutherford cables are typically made from solid round wire. While multi-stage cables have been made elsewhere, the purpose was usually to achieve a higher strand count and therefore a higher current carrying capability. In this work, we attempt to use two-stage roped strands made from ultrafine wires to fabricate Rutherford cables. The ultimate goal of this work is to obtain a very flexible cable that can wind accelerator magnet coils with a very tight bend radius in both the “easy way” (along the broad face of the cable) and the “hard way” (along the edge of the cable) in the wind-and-react manner, or wind coils with a radius typically used today but in the react and-wind manner with a much reduced degradation in critical current. We report our experience fabricating such Rutherford cables at the Lawrence Berkeley National Laboratory, and the initial findings from the analysis of the experimental cables made. We will discuss how the conventional wisdom and some rules of thumb for making Rutherford cables are no longer applicable or relevant, and the new thinking required in designing these cables.

Pong, Ian↗

3-D Unsteady Model for Be-Steam Reaction in Water-Cooled Ceramic Breeder Blanket

Here, the design of the water-cooled ceramic breeder (WCCB) blanket includes beryllium multiplier layers. At elevated temperature, beryllium reacts with steam in an exothermic reaction producing beryllium oxide and hydrogen. Such situation may occur in WCCB in the case of the rupture of one of the cooling pipes in the blanket module. This process occurs locally in a complex 3-D geometry of the blanket containing several different granular levels and a network of cooling pipes and structural supports. The process is also inherently unsteady since reaction rate depends on concentration of steam and pure beryllium which changes in time. In order to perform the detailed analysis of the process, the model of the reacting flowthrough porous media was developed and introduced into 3-D computational fluid dynamics code. In this model, granular beds are introduced as porous solids simplifying the model geometry and reducing typical mesh size to manageable amount of tens of millions of elements. A reaction rate between solid beryllium and steam is obtained from experimental results, and depends on temperature and concentration of the reactants. The differential equation for beryllium oxide fraction is introduced, allowing obtaining distributions of beryllium oxide in space and time. Multicomponent flow consisting of a homogenous mixture of steam and hydrogen is considered flowing through the porous solid with variable properties. Sink and source terms for steam and hydrogen fractions are determined by local beryllium oxide mass fraction source according to the molar ratios of beryllium steam reaction. The conjugated heat transfer approach is applied to calculate heat transfer in support structures as well as coolant flow, simultaneously with the porous medium steam flow in a blanket's granular beds. The model is validated using experimental data on beryllium steam reaction for granular bed samples.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and synthesis of diazirine‐containing dyes for polypropylene fibre: A study on the effect of alkyl chain

Abstract The dyeing of polypropylene fabrics utilising conventional‐disperse dyes often meets poor colour yield and fastness problems, fundamentally caused by the low affinity between dyes and polypropylene fibres. In this article, a new class of hydrophobic reactive dyes that can react with polypropylene were designed using diazirine moiety as a reactive group, azo structure as a chromophore, and an ester group as a linking bridge. The difference among these dyes was the alkyl chain length on the azo chromophore, which was used to fine‐tune the affinity between the dyes and fibre. The structures of the synthesised dyes and intermediates were characterised and confirmed using nuclear magnetic resonance, mass spectrometry, and infrared spectrometry. The absorption and thermal properties of the dyes were also studied to ensure their feasibility for dyeing application. In addition, the diazirine dyes were successfully applied to dye polypropylene fabrics using a two‐step process by dyeing in a non‐aqueous solvent and fixing it under heating. The dyes and polypropylene fibre were demonstrated to react, where the fixation values were in the range 64.5–76.4%. The systematic study of the structure–property relationship demonstrated the positive effect of the alkyl chain in promoting colour yield, however, accompanied by a slightly reduced fixation value. Due to the chemical bonding of the dye molecules to the fibre, the dyed polypropylene fabrics exhibited excellent colour fastness property, making the dyeing technology very promising for future industrial applications.

Guo, Guangluo↗

Current Understanding and Remaining Challenges in Modeling Long-Term Degradation of Borosilicate Nuclear Waste Glasses

Chemical durability is not a single material property that can be uniquely measured. Instead it is the response to a host of coupled material and environmental processes whose rates are estimated by a combination of theory, experiment, and modeling. High-level nuclear waste (HLW) glass is perhaps the most studied of any material yet there remain significant technical gaps regarding their chemical durability. The phenomena affecting the long-term performance of HLW glasses in their disposal environment include surface reactions, transport properties to and from the reacting glass surface, and ion exchange between the solid glass and the surrounding solution and alteration products. The rates of these processes are strongly influenced and are coupled through the solution chemistry, which is in turn influenced by the reacting glass and also by reaction with the near-field materials and precipitation of alteration products. Therefore, those processes must be understood sufficiently well to estimate or bound the performance of HLW glass in its disposal environment over geologic time-scales. This article summarizes the current state of understanding of surface reactions, transport properties, and ion exchange along with the near-field materials and alteration products influences on solution chemistry and glass reaction rates. Also summarized are the remaining technical gaps along with recommended approaches to fill those technical gaps.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Foaming during Nuclear Waste Melter Feeds Conversion to Glass: Application of Evolved Gas Analysis

During the final stages of batch-to-glass conversion in a waste-glass melter, gases evolving in the cold cap produce primary foam, the formation and collapse of which control the glass production rate via its effect on heat transfer to the reacting batch. We performed quantitative evolved gas analysis (EGA) for several HLW melter feeds with temperatures ranging from 100 °C to 1150 °C, the whole temperature span in a cold cap. EGA results were supplemented with visual observation of batch-to-glass transition using the feed expansion tests. Upon heating, most of the gases—mainly H2O, CO2, NO, NO2, N2 and O2—evolve at temperatures below 700 °C and escape directly to the atmosphere through open porosity. However, as open porosity closes when enough glass-forming melt appears at 720 °C, the residual gas evolution leads to the formation of primary foam. We found that primary foaming is mostly caused by the decomposition of residual carbonates, though oxygen evolution from iron-redox reaction can also play a role. We also show that the gas evolution shifts to a higher temperature when the heating rate increases. The implications for the mathematical modeling of foam layer in the cold cap are presented.

Hujova, Miroslava↗

Chemical and mechanical consequences of environmental barrier coating exposure to calcium-magnesium-aluminosilicate.

The success of Si-based ceramics as high-temperature structural materials for gas turbine applications relies on the use of environmental barrier coatings (EBCs) with low silica activity, such as Ba{sub 1-x}Sr{sub x}Al{sub 2}Si{sub 2}O{sub 8} (BSAS), which protect the underlying components from oxidation and corrosion in combustion environments containing water vapor. One of the current challenges concerning EBC lifetime is the effect of sandy deposits of calcium-magnesium-aluminosilicate (CMAS) glass that melt during engine operation and react with the EBC, changing both its composition and stress state. In this work, we study the effect of CMAS exposure at 1300 C on the residual stress state and composition in BSAS-mullite-Si-SiC multilayers. Residual stresses were measured in BSAS multilayers exposed to CMAS for different times using high-energy X-ray diffraction. Their microstructure was studied using a combination of scanning electron microscopy and transmission electron microscopy techniques. Our results show that CMAS dissolves the BSAS topcoat preferentially through the grain boundaries, dislodging the grains and changing the residual stress state in the topcoat to a nonuniform and increasingly compressive stress state with increasing exposure time. The presence of CMAS accelerates the hexacelsian-to-celsian phase transformation kinetics in BSAS, which reacts with the glass by a solution-reprecipitation mechanism. Precipitates have crystallographic structures consistent with Ca-doped celsian and Ba-doped anorthite.

36 MATERIALS SCIENCE↗

Determination of heat conductivity and thermal diffusivity of waste glass melter feed: Extension to high temperatures

The heat conductivity ({lambda}) and the thermal diffusivity (a) of reacting glass batch, or melter feed, control the heat flux into and within the cold cap, a layer of reacting material floating on the pool of molten glass in an all-electric continuous waste glass melter. After previously estimating {lambda} of melter feed at temperatures up to 680 deg C, we focus in this work on the {lambda}(T) function at T > 680 deg C, at which the feed material becomes foamy. We used a customized experimental setup consisting of a large cylindrical crucible with an assembly of thermocouples, which monitored the evolution of the temperature field while the crucible with feed was heated at a constant rate from room temperature up to 1100°C. Approximating measured temperature profiles by polynomial functions, we used the heat transfer equation to estimate the {lambda}(T) approximation function, which we subsequently optimized using the finite-volume method combined with least-squares analysis. The heat conductivity increased as the temperature increased until the feed began to expand into foam, at which point the conductivity dropped. It began to increase again as the foam turned into a bubble-free glass melt. We discuss the implications of this behavior for the mathematical modeling of the cold cap.

36 MATERIALS SCIENCE↗

Melter Feed Reactions at T ≤ 700°C for Nuclear Waste Vitrification

To understand feed‐to‐glass conversion for the vitrification of nuclear waste, we investigated batch reactions and phase transitions in a simulated nuclear waste glass melter feed heated at 5 K/min up to 700°C using optical microscopy, scanning electron microscopy with energy‐dispersive X‐ray spectroscopy, and X‐ray diffraction. To determine the content and composition of leachable phases, we performed leaching tests; the leachates were analyzed by inductively coupled plasma atomic emission spectroscopy. By 400°C, gibbsite and sodium borates lost water and converted to amorphous phase, whereas other metallic hydroxides dehydrated to oxides. Between 400°C and 700°C, carbonates decomposed before 500°C; amorphous aluminum oxide and calcium oxide reacted with the sodium borate and formed the more durable amorphous borate phase along with intermediate crystalline products; above 500°C, quartz began to dissolve, and hematite started to convert to trevorite.

Xu, Kai↗

Determination of heat conductivity of waste glass feed and its applicability for modeling the batch-to-glass conversion

The heat conductivity of reacting melter feed affects the heat transfer and conversion process in the cold cap (the reacting feed floating on molten glass). To investigate it, we simulated the feed conditions and morphology in the cold-cap by preparing “fast-dried slurry blocks”, formed by rapidly evaporating water from feed slurry poured onto a 200°C surface. A heat conductivity meter was used to measure heat conductivity of samples cut from the fast-dried slurry blocks, samples of a cold cap retrieved from a laboratory-scale melter, and loose dry powder feed samples. Our study indicates that the heat conductivity of the feed in the cold cap is significantly higher than that of loose dry powder feed, resulting from the feed solidification during the water evaporation from the feed slurry. To assess the heat transfer at higher temperatures when feed turns into foam, we developed a theoretical model that predicts the foam heat conductivity based on morphology data from in-situ X-ray computed tomography. The implications for the mathematical modeling of the cold cap are discussed.

Hujova, Miroslava↗

Rheology of simulated radioactive waste slurry and cold cap during vitrification

During the vitrification of radioactive waste in a Joule-heated melter, aqueous melter feed slurry forms a cold cap, a reacting and melting material, which floats on the surface of the molten glass. The rheological behavior of the feed affects cold cap formation and shape, and is vital for modeling the feed-to-melt conversion process. Here, we used slurry feed simulant and fast-dried slurry solids representing the cold cap to investigate the rheological behavior of the feed as it transforms into glass. Both low-temperature and high-temperature rheometry were performed and a new scheme was applied to estimate the feed viscosity. This study shows that the conversion advances in four sequential stages that form distinct regions in the cold cap: (i) a fast-spreading boiling slurry from which water evaporates, (ii) a porous solid region (viscosity > 10 8 Pa s) containing reacting solids and molten salts, (iii) a plastic region in which glass-forming melt connects the refractory solids (~10 8 to ~10 6 Pa s), and (iv) a viscous foam layer in which the viscosity drops from ~10 5 to ~10 1 Pa s. The implications for the mathematical modeling of the cold cap are discussed.

glass melting↗

Viscosity of glass-forming melt at the bottom of high-level waste melter feed cold caps: Effects of temperature and incorporation of solid components

At the final stages of conversion of melter feed (glass batch) to molten glass, the transient glass-forming melt becomes a continuous liquid phase encapsulating dissolving solid particles and gas bubbles that produce primary foam at the bottom of the cold cap (the reacting melter feed in an electric glass melting furnace). The glass-forming melt viscosity plays a dominant role in primary foam formation, stability, and eventual collapse, thus affecting the rate of melting (the glass production rate per cold cap area). For several melter feeds designed for nuclear waste vitrification, we have traced the glass-forming melt viscosity during the final stages of feed-to-glass conversion as it changes in response to changing temperature and composition (resulting from dissolving solid particles). Starting with a relatively low values at the moment when the melt connects, melt viscosity reaches maximum within the primary foam layer and then decreases to its final melter-operating temperature value. We paid a particular attention to the cold-cap bottom—the boundary between the primary foam layer and the thermal boundary layer—where the melt viscosity affects the rate of melting predominantly through its effect on the temperature at which primary foam is collapsing.

Lee, Seung Min↗

Synthesis, Characterization, Photophysics and Photochemistry of Pyrylogen Electron Transfer Sensitizers

A series of new dicationic sensitizers that are hybrids of pyrylium salts and viologens has been synthesized. The electrochemical and photophysical properties of these "pyrylogen" sensitizers are reported in sufficient detail to allow rationale design of new photoinduced electron transfer reactions. The range of their reduction potentials (+0.37-+0.05V vs SCE) coupled with their range of singlet (48-63 kcal mol(-1)) and triplet (48-57kcalmol(-1)) energies demonstrate that they are potent oxidizing agents in both their singlet and triplet excited states, thermodynamically capable of oxidizing substrates with oxidation potentials as high as 3.1eV. The pyrylogens are synthesized in three steps from readily available starting materials in modest overall 11.4-22.3% yields. These sensitizers have the added advantages that: (1) their radical cations do not react on the CV timescale with oxygen bypassing the need to run reactions under nitrogen or argon and (2) have long wavelength absorptions between 413 and 523nm well out of the range where competitive absorbance by most substrates would cause a problem. These new sensitizers do react with water requiring special precautions to operate in a dry reaction environment.

Clennan, Edward L.↗

Development of a Spouted Bed Reactor for Chemical Looping Combustion

We have investigated a novel gas/solid contacting configuration for chemical looping combustion (CLC) with potential operating benefits. CLC configurations are typically able to achieve high fuel conversion efficiencies at the expense of high operating costs and low system reliability. The spouted fluid bed (SB) was identified as an improved reactor configuration for CLC, since it typically exhibits high heat transfer rates and offers the ability to use lower gas flows for material movement compared to bubbling beds (BB). Multiphase Flow with Interphase eXchanges (MFIX) software was used to establish a spouted fluid bed reactor design. An experimental setup was built to supplement the model. The experimental setup was also modified for testing under high temperature, reacting conditions (1073–1273 K). The setup was operated in either a spouted fluid bed or a bubbling bed regime to compare the performance attributes of each. Results for the reactor configurations are presented for CLC using a mixture of carbon monoxide and hydrogen as fuel. Compared to the bubbling bed, the spouted fluid bed reactor achieved an equivalent or better fuel conversion at a lower pressure drop over the material bed. The spouted fluid bed design represents a viable configuration to improve gas/solid contacting for efficient fuel conversion, lower energy requirements for material movement and increase operational robustness for CLC. The research laid the groundwork for future research into a multi-phase reacting flow CLC system. The system will be developed from computational fluid dynamic modeling and pilot-scale testing to expedite the development of CLC technologies.

Energy & Fuels↗

Modeling Microwave-Enhanced Chemical Vapor Infiltration Process for Preventing Premature Pore Closure

The chemical vapor infiltration (CVI) process involves infiltrating a porous preform with reacting gases that undergo chemical transformation at high temperatures to deposit the ceramic phase within the pores, ultimately leading to a dense composite. The conventional CVI process in composite manufacturing needs to follow an isothermal approach to minimize temperature differences between the external and internal surfaces of the preform, ensuring that reactive gases infiltrate internal pores before external surfaces seal. Here, this study addresses the challenge of premature pore closure in CVI processes through microwave heating. A frequency-domain microwave solver is developed in OpenFOAM to investigate volumetric heating mechanisms within the preform. Through numerical studies, we demonstrate the capability of microwave heating of creating an inside-out temperature inversion. This inversion accelerates reactions proximal to the preform center, effectively mitigating the risk of premature external pore closure and ensuring uniform densification. The results reveal a significant enhancement in temperature inversion when high-permittivity reflectors are incorporated to generate resonant waves. This microwave heating strategy is then coupled with high-fidelity direct numerical simulation (DNS) of reacting flow, enabling the analysis of resulting densification processes. The DNS includes detailed chemistry and realistic diffusion coefficients. The numerical results can be used to estimate the impact of microwave-induced temperature inversion on densification in productions.

42 ENGINEERING↗