Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

AE and DE mass spectrometer observations relevant to the shuttle glow

Recent work suggested that NO2 may be responsible for the observed continuum glow near surfaces of the space shuttle. The observations of atomic nitrogen (N) are reported at shuttle altitudes using mass spectrometers, giving special attention to the surface reactions of N relevant to the production of NO2 on spacecraft surfaces. Data from two semi-open sources mass spectrometers, the OSS instruments on the Atmosphere Explorer-C and -D satellites, and the closed source Neutral Atmospheric Composition Spectrometer (NACS) on the Dynamic Explorer-2 satellite are presented to show the similar behavior of NO in each case and the contrasting behavior of NO2. Although signals of NO and NO2 are highly dependent on surface temperature and surface composition, it appears that direct exposure of ion source surfaces to rammed gas is a necessary condition for the production of large amounts of NO2. Evidence that elevated surface temperatures can significantly reduce the production of NO2, likely by causing more rapid desorption of NO from these surfaces, is presented.

Engebretson, M. J.↗

Spectral identification/elimination of molecular species in spacecraft glow

Computer models of molecular electronic and vibrational emission intensities were developed. Known radiative emission rates (Einstein coefficients) permit the determination of relative excited state densities from spectral intensities. These codes were applied to the published spectra of glow above shuttle surface and to the Spacelab 1 results of Torr and Torr. The theoretical high-resolution spectra were convolved with the appropriate instrumental slit functions to allow accurate comparison with data. The published spacelab spectrum is complex but N2+ Meinel emission can be clearly identified in the ram spectrum. M2 First Positive emission does not correlate well with observed features, nor does the CN Red System. Spectral overlay comparisons are presented. The spectrum of glow above shuttle surfaces, in contrast to the ISO data, is not highly structured. Diatomic molecular emission was matched to the observed spectral shape. Source excitation mechanisms such as (oxygen atom)-(surface species) reaction product chemiluminescence, surface recombination, or resonance fluorescent re-emission will be discussed for each tentative assignment. These assignments are the necessary first analytical step toward mechanism identification. Different glow mechanisms will occur above surfaces under different orbital conditions.

Green, B. D.↗

The production of glow precursors by oxidative erosion of spacecraft surfaces

Erosion rates of organic materials are measured during a recent flight of the shuttle (STS-8). Several forms of carbon and a variety of thermosetting and thermoplastic polymers are exposed to the ram beam of atomic oxygen. Arrhenius energies of about 1000 to 2000 cal/mole were measured from the rate dependencies on temperature. If some simple assumptions are made about the chemical nature of the desorbed species, the data can be used to estimate production rates at surfaces in orbit under different conditions of temperature, oxygen atom flux, and material surface conditions.

Gregory, J. C.↗

An assessment of the impact of spacecraft glow on the Hubble space telescope. Summary of existing observations and theory

Visible spacecraft glow was first observed on the Atmospheric Explorer spacecraft (AE-E) and studied in some detail with the Visible Airglow Experiment (VAE). The AE-E was a spin-stabilized spacecraft without thrusters at an altitude of 140 to 280 km. The VAE contained six visible wavelength photometers that measured a glow spectrum which: (1) rose steeply in the red, (2) decreased with a cos cubed PH1 dependence from pointing into the ram direction of the spacecraft orbital motion, and (3) decreased in intensity with increasing altitude with the same dependence as the measured atomic oxygen number atmospheric density (O) and not with the measured molecular nitrogen density (N sub 2). It is proposed that the glow is produced by chemical reactions on the spacecraft surface as it sweeps through the atmospheric O, with roughly 5-8 eV per O atom available for excitation from the orbital motion of the spacecraft. This glow may in principal be produced by any of a number of species, including molecular band emission from OH, NO, and NO2. An attempt is made to scale the observed glow to the Hubble space telescope.

Clarke, J. T.↗

Infrared measurements of spacecraft glow planned for Spacelab 2

A liquid helium cooled infrared telescope (IRT) was to be flown in July 1985 on Spacelab 2. The instrument is designed to measure both diffuse and discrete infrared astronomical sources, including the zodiacal light, galactic, and extragalactic components, as well as to evaluate the induced Orbiter environment. The focal plane contains ten photoconductive detectors covering six broad bands from 2 to 120 microns. Each detector has a 0.5 by 1.0 deg field of view optimized for detection of extended sources of IR radiation. Except for the 2 micron detector, the system noise is limited by the sky background noise. The measurements planned for the IRT use the 1 meter base of the Plasma Diagnostic Package (PDP), an already existing SL 2 experiment, as the glow generating surface. The measurements are repeated changing the position of the PDP, the attitude of the Orbiter, and the ram direction in an effort to remove both the thermal component of the PDP emission and the cosmic background radiation.

Fazio, G. G.↗

A possible glow experiment for the EOM 1-2 mission

A possible opportunity for study of surface glow exists during the Environmental Observation Mission (EOM) 1-2 mission scheduled for launch on September 3, 1986. The EOM 1-2 payload includes spectroscopic and photometric instruments which operate in wavelength regions of great interest to the glow assessment activity. However, as in the case of many remote sensing instruments, these are located in the payload bay in such a way as to avoid viewing any shuttle or payload surfaces. If these instruments are to measure the spectral characteristics of surfaces, it is necessary for such surfaces to be positioned in the field of view of these instruments for the duration of the particular measurement sequence. It is possible that the shuttle of which the EOM 1-2 payload flies will have an Remote Manipulator System (RMS) in place. An assessment has shown that it is indeed feasible to place a four-sided cuff around the end of the RMS. The four sides, each coated with a different material, can then be positioned in turn above the instruments, and in such a way that the surface is alternately pointed into the ram and into the wake.

Torr, M. R.↗

Assessing the proficiency of software developers

The trend lines presented can be useful in a number of ways. They provide a baseline of comparision from which software developers can compare their performance against a large database of similar projects. This will often identify a organizational style. It was possible to quantify the organizational style using the Manpower Buildup Gradient. That the developer was a better than average producer on RAM based systems was shown. The Ck associated with the ROM system suggests that it is a different class of work. When this system is compared against the Firmware database it is very creditable. It is important to recognize that there are non linearities present in the software process. The non linearities are tied to system size. For comparative purposes one must always make judgements based on similar sizes. In the past the tendency has been to calculate a few ratios on several projects and then compare them without any regard to amount of functionality that was created. This practice can be very misleading and dangerous. The method described, used in a thoughtful analytic manner, can be very helpful.

Putnam, L. H.↗

Interface of the transport systems research vehicle monochrome display system to the digital autonomous terminal access communication data bus

An upgrade of the transport systems research vehicle (TSRV) experimental flight system retained the original monochrome display system. The original host computer was replaced with a Norden 11/70, a new digital autonomous terminal access communication (DATAC) data bus was installed for data transfer between display system and host, while a new data interface method was required. The new display data interface uses four split phase bipolar (SPBP) serial busses. The DATAC bus uses a shared interface ram (SIR) for intermediate storage of its data transfer. A display interface unit (DIU) was designed and configured to read from and write to the SIR to properly convert the data from parallel to SPBP serial and vice versa. It is found that separation of data for use by each SPBP bus and synchronization of data tranfer throughout the entire experimental flight system are major problems which require solution in DIU design. The techniques used to accomplish these new data interface requirements are described.

Easley, W. C.↗

Is random access memory random?

Most software is contructed on the assumption that the programs and data are stored in random access memory (RAM). Physical limitations on the relative speeds of processor and memory elements lead to a variety of memory organizations that match processor addressing rate with memory service rate. These include interleaved and cached memory. A very high fraction of a processor's address requests can be satified from the cache without reference to the main memory. The cache requests information from main memory in blocks that can be transferred at the full memory speed. Programmers who organize algorithms for locality can realize the highest performance from these computers.

Denning, P. J.↗

Volcanic impact on stratospheric aerosol chemistry

Samples collected by the National Center for Atmospheric Research (NCAR) using the multiple-filter sampler on the U-2 were analyzed. The sampler is capable of exposing a number of 110 mm filters in sequence to ram air flow. Two types of filters, IPC cellulose and polystrene, were used, both of which have high blank levels for the trace elements determined. The levels of most trace elements in the stratosphere are so low under normal circumstances that none can be seen. Results from the eruption of Mt. St. Helens, a mystery cloud (probably volcanic in origin) in 1982, and the El Chichonal eruption in 1983 are discussed. To improve the collection of particles for chemical analysis, a new sampling system was developed for use on the U-2. The sampler consisted of an electrostatic collection of particles between 1 and 0.001 micron diameter dierectly onto electron microscopic grids, followed by a thermal precipitation for the smaller particles. The system was built and tested in the laboratory, but never flown on the U-2.

Zoller, W. H.↗

Spacecraft glow

Spacecrft glow may be defined as optical emissions originating immediately above those surfaces of an orbiting spacecraft which face into the ram direction. In the case of the Space Shuttle at its lower orbital altitudes, the glow is bright enough to be seen by the unaided eye. The glow observed at the Dynamics Explorer was caused primarily by OH molecules which formed on the spacecraft surface from ionospheric atomic oxygen and hydrogen. The two theories which are currently considered to obtain an explanation for the glow phenomenon include the plasma interaction mechanism and the chemical mechanism. A number of difficulties appear to exclude the applicability of the plasma interaction mechanism. Thus, the chemical mechanism remains as the only viable theory. According to this mechanism, simple impact of incoming atmosphere atoms and molecules causes both formation and excitation of molecules at the surface of a spacecraft.

Dessler, A. J.↗

A color graphics environment in support of supercomputer systems

An initial step in the integration of an upgrade of a VPS-32 supercomputer to 16 million 64-bit words, to be closely followed by a further upgrade to 32 million words, was to develop a graphics language commonality with other computers at the Langley Center. The power of the upgraded supercomputer is to users at individual workstations, who will aid in defining the direction for future expansions in both graphics software and workstation requirements for the supercomputers. The LAN used is an ETHERNET configuration featuring both CYBER mainframe and PDP 11/34 image generator computers. The system includes a film recorder for image production in slide, CRT, 16 mm film, 35 mm film or polaroid film images. The workstations have screen resolutions of 1024 x 1024 with each pixel being one of 256 colors selected from a palette of 16 million colors. Each screen can have up to 8 windows open at a time, and is driven by a MC68000 microprocessor drawing on 4.5 Mb RAM, a 40 Mb hard disk and two floppy drives. Input is from a keyboard, digitizer pad, joystick or light pen. The system now allows researchers to view computed results in video time before printing out selected data.

Smith-Taylor, R.↗

Spacecraft mass spectrometer ion source employing field emission cathodes

An ion source that utilizes a pair of thin-film field emission cathodes to provide current for electric impact ionization is studied. The field emission cathodes are composed of microscopically small needle tips and an extraction electrode; the cathodes generate a 200-eV, 0.1-mA electron beam. The multistep process for the manufacturing of the field emission cathodes is examined. The operation of the ion source, which ionizes atoms and molecules that enter the mass spectrometer with a ram velocity of about 80 km/sec, is described.

Curtis, C. C.↗

Hardware requirements: A new generation partial reflection radar for studies of the equatorial mesosphere

A new partial reflection (PR) radar is being developed for operation at the proposed Equatorial Observatory. The system is being designed to make maximum use of recent advances in solid-state technology in order to minimize the power requirements. In particular, it is planned to use a solid-state transmitter in place of the tube transmitters previously used in PR systems. Solid-state transmitters have the advantages that they do not need high voltage supplies, they do not require cathode heaters with a corresponding saving in power consumption and parts are readily available and inexpensive. It should be possible to achieve 15 kW peak powers with recently announced fast switching transistors. Since high mean powers are desirable for obtaining good signal-to-noise ratios, it is also planned to phase code the transmitted pulses and decode after coherent integration. All decoding and signal processing will be carried out in dedicated microprocessors before the signals are passed to a microcomputer for on-line analysis. Recent tests have shown that an Olivetti M24 micro (an IBM compatible) running an 8-MHz clock with a 8087 coprocessor can analyze data at least as fast as the minicomputers presently being used with the Adelaide PR rad ar and at a significantly lower cost. The processed winds data will be stored in nonvolatile CMOS RAM modules; about 0.5 to 1 Mbyte is required to store one week's information.

Vincent, R. A.↗

An accelerated forth data-acquisition system

A new data acquisition system was put into operation at Urbana in August 1984. It uses a standard Apple 2 microcomputer with 48 k RAM and a standard 5 1/4 inch floppy disk. Design criteria for the system is given. The system was implemented using fig-FORTH, a threaded interpretive language which permits easy interfacing to machine code. The throughput of this system is better by a factor of 6 than the PDP-15 minicomputer system previously used, and it has the real time display feature and provides the data in much more convenient form. The features which contribute to this improved performance is listed.

Bowhill, S. A.↗

Controlling and monitoring the space-station plasma interaction: A baseline for performing plasma experiments and using advanced technology

The size, complexity, and motion of space station through the Earth's environmental plasma means that there will be a large, complicated interaction region, involving a sheath, wake, charging of surfaces, induced electric fields, secondary emission, outgassing with ionization, etc. This interaction will necessarily be a factor in carrying out and interpreting plasma experiments and in the use of certain technologies. Attention should be given ahead of time to: (1) monitoring this interaction so that it is well described; (2) implifying the interaction by appropriate design and construction of the spacecraft and by appropriate planning of technology use; and (3) controlling the interaction by both active and passive means. Plasma emitters for modifying and controlling the spacecraft charge should be placed in several locations. Portable electrostatic shields could be deployed around noisy sections of the spacecraft in order to carry out sensitive experiments. A particle umbrella could be raised to deflect the ram ions and neutrals in order to provide a controlled environment. These interactions are briefly discussed.

Whipple, Elden C.↗

Present star formation in sprials of the Virgo cluster

From a study of spiral galaxies in the Virgo Cluster (VC), it is shown that the RDDO anemics with smooth arms and no sign of present formation of (massive) stars have HI surface densities below a threshold value of 2 to 5 x 10 to the 20th power atoms/sq cm. This value is very consistent with predictions of theoretical models. It is likely that the HI disks of VC HI-deficient RDDO anemics were deeply affected by ram pressure stripping in the gaseous intracluster medium, while VC HI deficient RDDO spirals were only peripherally stripped.

Guiderdoni, B.↗

Models relating the radio emission and ionised gas in Seyfert nuclei

Possible models are discussed in which the radio emitting components in Seyfert II nuclei can compress and accelerate the ambient nuclear medium to produce the characteristics of the narrow line region. A first order model, which considers only the expansion of the radio components, is briefly described. However, in many Seyfert nuclei it appears that the linear motion of the radio components is also important. This can result in shock heating of the ambient medium, and if the cooling time is long enough, can lead to a displacement between the radio component and the associated emission lines. This effect may be present in NGC 1068 and NGC 5929 and by considering ram pressure balance and the cooling length it is possible to estimate lobe velocities and ambient densities.

Pedlar, A.↗