Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Block orbital-selective Mott insulators: A spin excitation analysis

We present a comprehensive study of the spin excitations—as measured by the dynamical spin structure factor S(q,ω)—of the so-called block-magnetic state of low-dimensional orbital-selective Mott insulators. We realize this state via both a multi-orbital Hubbard model and a generalized Kondo-Heisenberg Hamiltonian. Due to various competing energy scales present in the models, the system develops periodic ferromagnetic islands of various shapes and sizes, which are antiferromagnetically coupled. The 2×2 particular case was already found experimentally in the ladder material BaFe2Se3 that becomes superconducting under pressure. Here we discuss the electronic density as well as Hubbard and Hund coupling dependence of S(q,ω) using density matrix renormalization group method. Several interesting features were identified: (1) An acoustic (dispersive spin-wave) mode develops. (2) The spin-wave bandwidth establishes a new energy scale that is strongly dependent on the size of the magnetic island and becomes abnormally small for large clusters. (3) Optical (dispersionless spin excitation) modes are present for all block states studied here. In addition, a variety of phenomenological spin Hamiltonians have been investigated but none matches entirely our results that were obtained primarily at intermediate Hubbard U strengths. Our comprehensive analysis provides theoretical guidance and motivation to crystal growers to search for appropriate candidate materials to realize the block states, and to neutron scattering experimentalists to confirm the exotic dynamical magnetic properties unveiled here, with a rich mixture of acoustic and optical features.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetics of Moisture Absorption for Alkali Extracted Steam-Exploded Fiber Filled High-Density Polyethylene Composites

Acacia mangium wood fiber derived from steam-explosion and fiber fractionation treatment was used as fillers for high-density polyethylene (HDPE). The alkali extracted steam-exploded fibers (AEF) obtained were acetylated to produce acetylated fibers (AAEF) having three different weight percent gain (WPG). Composites of AEF or AAEF and HDPE were prepared via 2-roll mill, compression molded and cut into dumbbell specimens. All samples were immersed in water at room temperature for 30 days. The process of absorption of water by all composites followed the kinetics and mechanisms described by the Fick's theory. Diffusion coefficient (D) values increased with filler loading but decreased with increasing WPG of the AAEF fiber. Further decrease was observed when maleated polyethylene (MAPE) was added to the composite system. This was due to improved fiber-matrix adhesion that restricts movement of water molecules from further penetrate inside the composite structures.

36 MATERIALS SCIENCE↗

Target space entanglement in Matrix Models

We study target space entanglement in gauged multi-matrix models as models of entanglement between groups of D-branes separated by a planar entangling surface, paying close attention to the implementation of gauge invariance. We open with a review of target space entanglement between identical particles, which shares some important features (specifically a gauged permutation symmetry) with our main problem. For our matrix models, we implement a gauge fixing well-adapted to the entangling surface. In this gauge, we map the matrix model problem to that of entanglement of a U(1) gauge theory on a complete or all-to-all lattice. Matrix elements corresponding to open strings stretching across the entangling surface in the target space lead to interesting contributions to the entanglement entropy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gas transport characteristics of supramolecular networks of metal-coordinated highly branched Poly(ethylene oxide)

Model systems are developed and investigated to better understand the effect of polyether-metal ion interactions on gas separation characteristics. These systems help answer current questions raised by the substantial body of research on metal-organic frameworks (MOFs) dispersed in polyethers to improve gas separation performance, where favorable interactions between the metal centers and polyethers are preferred to improve interfacial compatibility. Specifically, we investigate CO 2 /gas transport properties of supramolecular networks comprising cross-linked poly(ethylene oxide) (XLPEO) and dissociable salts, including LiClO 4 , Ni(BF 4 ) 2 , and Cu(BF 4 ) 2 . Increasing the salt content increases the glass transition temperature (T g ) and generally decreases gas diffusivity and permeability, which can be successfully described using a T g -integrated free volume model with an expression similar to the Vogel-Tammann-Fulcher (VTF) equation. Surprisingly, low loadings of LiClO 4 and Cu(BF 4 ) 2 (2 mass% or less) can increase gas permeability by 30%–70% without affecting the CO 2 /gas selectivity. This increase correlates with polyether-metal ion dynamics as measured by dielectric spectroscopy. Understanding how interaction-mediated dynamics affect gas transport will be instrumental to designing MOF-based mixed matrix materials for gas separations.

36 MATERIALS SCIENCE↗

Use of radial symmetry for the calculation of cylindrical absorption coefficients and optimal capillary loadings

The problem of numerically evaluating absorption correction factors for cylindrical samples has been revisited using a treatment that fully takes advantage of the sample symmetry. It is shown that the path lengths for all points within the sample at all possible diffraction angles can be trivially determined once the angle-dependent distance distribution for a single line of points is calculated. This provides advantages in both computational efficiency and in gaining an intuitive understanding of the effects of absorption on diffraction data. A matrix of absorption coefficients calculated for µR products between 0 and 20 for diffraction angles θ D of 0° to 90° were used to examine the influence of (1) capillary diameter and of (2) sample density on the overall scattered intensity as a function of diffraction angle, where µ is the linear absorption coefficient for the sample and R is the capillary radius. Based on this analysis, the optimal sample loading for a capillary experiment to maximize diffraction at angles of 0 – 50° is in general expected to be achieved when the maximum radius capillary compatible with the beam is used, and when the sample density is adjusted to be 3/(4µR) of its original density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of nucleon matrix element uncertainties on the interpretation of direct and indirect dark matter search results

We study in detail the impact of the current uncertainty in nucleon matrix elements on the sensitivity of direct and indirect experimental techniques for dark matter detection. We perform two scans in the framework of the cMSSM: one using recent values of the pion-sigma term obtained from Lattice QCD, and the other using values derived from experimental measurements. The two choices correspond to extreme values quoted in the literature and reflect the current tension between different ways of obtaining information about the structure of the nucleon. All other inputs in the scans, astrophysical and from particle physics, are kept unchanged. We use two experiments, XENON100 and IceCube, as benchmark cases to illustrate our case. We find that the interpretation of dark matter search results from direct detection experiments is more sensitive to the choice of the central values of the hadronic inputs than the results of indirect search experiments. The allowed regions of cMSSM parameter space after including XENON100 constraints strongly differ depending on the assumptions on the hadronic matrix elements used. On the other hand, the constraining potential of IceCube is almost independent of the choice of these values.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reduction of leakage currents with nanocrystals embedded in an amorphous matrix in metal-insulator-metal capacitor stacks

CaTiO{sub 3} layers with varying thicknesses in metal-insulator-metal capacitor stacks were deposited at 550 deg. C using radio-frequency magnetron sputtering. The combination of electrical and transmission electron microscopy measurements allows a correlation of k-value and leakage current to the degree of crystallinity. Experiments show that higher crystallinity and, therefore, higher k-values lead to increasing leakage currents and change of conduction mechanisms. However, leakage currents are significantly reduced when crystallites are embedded in an amorphous matrix. Selective growth of these crystallites is owed to cube-on-cube nucleation of CaTiO{sub 3} on {l_brace}011{r_brace} Pt.

36 MATERIALS SCIENCE↗

Light shifts and electric dipole matrix elements in Ba{sup +} and Ra{sup +}

We present an analysis of the recent measurements of the light-shift ratio in Ba{sup +} at two different wavelengths that enables us to reduce the uncertainty of the largest E1 dipole matrix elements of Ba{sup +}. These matrix elements are, for instance, of interest for the proposed parity-nonconservation (PNC) experiment in Ba{sup +}. We show that a new measurement of the light-shift ratio in Ba{sup +} at a wavelength of 350 nm could further reduce the uncertainty of the (for PNC studies most important) <5D{sub 3/2}||D||6P{sub 1/2}> matrix element. Finally, as groundwork for the planned PNC experiment at KVI, we present relativistic coupled-cluster calculations of the E1 matrix elements for Ra{sup +}, and investigate the potential of similar light-shift ratio measurements in this ion.

74 ATOMIC AND MOLECULAR PHYSICS↗

A novel method to evaluate nutrient retention by biological soil crust exopolymeric matrix

Biological soil crusts (biocrusts) are microbial communities commonly found in the upper layer of arid soils. These microorganisms release exopolysaccharides (EPS), which form the exopolymeric matrix (EPM), allowing them to bond soil particles together and survive long periods of dryness. The aim of this paper is to develop methods for measuring metabolite retention by biocrust EPM and EPS. We report new methods for the investigation of metabolite sorption on biocrusts compared to the underlying unconsolidated subcrust fraction. A 13 C–labeled bacterial lysate metabolite mixture was incubated with biocrust, subcrust and biocrust-extracted EPS. Non-sorbed metabolites were extracted and analyzed by liquid chromatography/mass spectrometry. This simple and rapid approach enabled the comparison of metabolite sorption on the biocrust EPM or EPS versus mineral sorption on the underlying soils. Our results suggest that the biocrust (and its extracted EPS) sorb more metabolites, especially amino acids and organic acids, than the underlying subcrust. This study demonstrates a useful method to highlight the essential role of biocrust (especially the EPM), which acts as a passive nutrient filter, sequestering metabolites released by microbes during wetting events. Finally, this may facilitate recovery of the community upon wetting and further enhance biocrust survival and nutrient retention.

59 BASIC BIOLOGICAL SCIENCES↗

Role of climate goals and clean-air policies on reducing future air pollution deaths in China: a modelling study

Over 3 million people still die every year from diseases caused by exposure to outdoor PM 2.5 air pollution, and more than a quarter of these premature deaths occur in China. In addition to clean air policies that target pollution emissions, climate policies aimed at reducing fossil-fuel CO 2 emissions (e.g., to avoid 1.5°C of warming) may also dramatically improve air quality and public health. Yet there has been no comprehensive accounting of public health outcomes under different energy pathways and local clean air management decisions in China. In particular, further research is needed to understand the relationships among climate and clean air polices and future health burdens in China, where an aging population will further exacerbate the impacts of air pollution. Using a China-focused integrated assessment model (GCAM-China) and a dynamic emission projection model (DPEC), we project future Chinese air quality in scenarios spanning a range of global climate targets (i.e. 1.5°0C, 2°C, NDC, unambitious, baseline, and 4.5°C) as well as national clean air actions (i.e. 2015-pollution, current-pollution, and ambitious-pollution). We then evaluate the health impacts of PM2·5 air pollution of scenario matrix using the chemical transport model WRF-CMAQ and the latest epidemiological concentration–response (C-R) functions (i.e. GBD2019). We find that, without ambitious climate mitigation (e.g., under current NDC pledges), Chinese deaths related the PM2.5 air pollution do not substantially decrease—and often grow—by mid-century, regardless of clean air policies and air quality improvements. For example, in scenarios that track China’s current NDC pledge and deploy best-available pollution control technologies, PM 2.5 -related deaths in China decrease slightly by 2030 (to 1.2 million per year) but no further by mid-century (Ambitious-pollution-NDC-goals; 1.2 million deaths in 2050) despite substantial and continuous improvements in population-weighted air quality (27.2 to 16.0 µg/m 3 from 2030 to 2050). The contrary trends of improving air quality and increasing PM 2·5 -related deaths in many of our scenarios reveals the extent to which extra efforts are needed to compensate for the established fact of increasing age of China’s population in future. Substantial decreases in China’s PM 2.5 -related deaths and age-standardized death rates (e.g., decreasing by 0.3–0.5 million deaths and 10.2–14.2 per 100,000 population age-standardized death rates per year) thus require the sort of large-scale transition in energy sources entailed by scenarios that meet international climate goals to avoid 1.5°C and 2°C of warming (Ambitious-pollution-2°C- and 1.5°C-goals).

58 GEOSCIENCES↗

Atomistic model of xenon gas bubble re-solution rate due to thermal spike in uranium oxide

Atomistic simulations are performed to study the response of Xe gas bubbles in UO 2 to ionizing fission products through the thermal spike approximation. A portion of the total electronic stopping power (S e ) is taken as the thermal spike energy through a ratio variable ζ. The thermal spike energy causes extreme melting within the fission track cylindrical region. Molecular dynamics is employed to quantify the probability of a Xe gas atom to be re-solved (re-dissolved) back into the UO 2 matrix. Subsequently, a re-solution model is developed and parametrized as a function of bubble radius (R), off-centered distance (r), and thermal spike energy (ζS e ). The off-centered distance measures the shift of the thermal spike axis from the bubble center. To evaluate the re-solution model, independent fission product yield of U-235 fission due to thermal neutrons (0.0253 eV), taken from the JEFF-3.3 database, is used. The kinetic energy of the fission products is taken from the EXFOR database. Subsequently, the decay of Se over distance for each fission product is simulated. Finally, the evaluated re-solution rate (re-solution probability per second) is presented as a function of bubble radius for a range of ζ.

74 ATOMIC AND MOLECULAR PHYSICS↗

Higgs mediated flavor changing neutral currents in warped extra dimensions

In the context of a warped extra dimension with standard model fields in the bulk, we obtain the general flavor structure of the Higgs couplings to fermions. These couplings will be generically misaligned with respect to the fermion mass matrix, producing large and potentially dangerous flavor changing neutral currents. As recently pointed out [K. Agashe and R. Contino, arXiv:0906.1542.], a similar effect is expected from the point of view of a composite Higgs sector, which corresponds to a four-dimensional theory dual to the five-dimensional setup by the AdS/CFT correspondence. We also point out that the effect is independent of the geographical nature of the Higgs (bulk or brane localized), and specifically that it does not go away as the Higgs is pushed towards the IR boundary. The flavor changing neutral currents mediated by a light enough Higgs (especially their contribution to {epsilon}{sub K}) could become of comparable size as the ones coming from the exchange of Kaluza-Klein gluons. Moreover, both sources of flavor violation are complementary since they have inverse dependence on the five-dimensional Yukawa couplings, such that we cannot decouple the flavor violation effects by increasing or decreasing these couplings. We also find that for Kaluza-Klein scales of a few TeV, the Higgs couplings to third generation fermions could experience suppressions of up to 40% while the rest of diagonal couplings would suffer much milder corrections. Potential LHC signatures like the Higgs flavor violating decays h{yields}{mu}{tau} or h{yields}tc, or the exotic top decay channel t{yields}ch, are finally addressed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

How perfect can a gluon plasma be in perturbative QCD?

The shear viscosity to entropy density ratio, {eta}/s, characterizes how perfect a fluid is. We calculate the leading order {eta}/s of a gluon plasma in perturbation using the kinetic theory. The leading order contribution only involves the elastic gg{r_reversible}gg (22) process and the inelastic gg{r_reversible}ggg (23) process. The hard-thermal-loop (HTL) treatment is used for the 22 matrix element, while the exact matrix element in vacuum is supplemented by the gluon Debye mass insertion for the 23 process. Also, the asymptotic mass is used for the external gluons in the kinetic theory. The errors from not implementing HTL and the Landau-Pomeranchuk-Migdal effect in the 23 process, and from the uncalculated higher order corrections, are estimated. Our result smoothly connects the two different approximations used by Arnold, Moore, and Yaffe (AMY) and Xu and Greiner (XG). At small {alpha}{sub s} ({alpha}{sub s}<<1), our result is closer to AMY's collinear result while at larger {alpha}{sub s} the finite angle noncollinear configurations become more important and our result is closer to XG's soft bremsstrahlung result. In the region where perturbation is reliable ({alpha}{sub s} < or approx. 0.1), we find no indication that the proposed perfect fluid limit {eta}/s{approx_equal}1/(4{pi}) can be achieved by perturbative QCD alone. Whether this can be achieve for {alpha}{sub s} > or approx. 0.1 is still an open question.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Columbia Accident Investigation Board Report. Volume Five

Volume V of the Report contains appendices that were not cited in VolumeI. These consist of documents produced by NASA and other organizations, which were provided to the Columbia Accident Investigation Board in support of its inquiry into the February 1, 2003 destruction of the Space Shuttle Columbia The contents include:. Appendix G.1 Requirements and Procedures for Certification of Flight Readiness; Appendix G.2 Appendix R, Space Shuttle Program Contingency Action Plan; Appendix G.3 CAIB Charter, with Revisions; Appendix G.4 Group 1 Matrix Brief on Maintenance, Material, and Management; Appendix G.5 Vehicle Data Mapping(VDM) Team Final Report, Jun 13, 2003; Appendix G.6 SRB Working Group Presentation to CAIB; Appendix G. 7 Starfire Team Final Report, Jun 3, 2003; Appendix G.8 Using the Data and Observations from Flight STS-107, Executive Summary; Appendix G.9 Contracts, Incentives, and Safety/Technical Excellence; Appendix G.10 Detailed Summaries: Rogers Commission Report, ASAP Report, SIAT Report; Appendix G.11 Foam Application and Production Chart; Appendix G.12 Crew Survivability Report; and Appendix G.12 Aero/Aerothermal/ Thermal/Structures Team FinalReport, August 6, 2003.

CAIB (COLUMBIA ACCIDENT INVESTIGATION BOARD)↗

Stress transfer during different deformation stages in a nano-precipitate-strengthened Ni-Ti shape memory alloy

Understanding the role of fine coherent precipitates in the micromechanical behavior of precipitate-strengthened shape memory alloys (SMAs), which still remains a mystery heretofore, is of crucial importance to the design of advanced SMAs with optimal functional and mechanical properties. Here, we investigate the lattice strain evolution of, and the stress partition between the nanoscale Ni{sub 4}Ti{sub 3} precipitates and the matrix in a precipitate-strengthened Ni-Ti SMA during different deformation stages by in-situ synchrotron high-energy X-ray diffraction technique. We found that, during R-phase reorientation and stress-induced martensitic transformation, which both involve the shear deformation process, the lattice strain of the nanoscale precipitates drastically increases by a magnitude of 0.5%, which corresponds to an abrupt increase of ∼520 MPa in internal stress. This indicates that stress repartition occurs and most of the stress is transferred to the precipitates during the shear deformation of the matrix. It is further revealed that the nanoscale precipitates which only have a low volume fraction bear a considerable amount of applied stress during all deformation stages investigated, implying that the nanoscale precipitates play an important role in the deformation behavior of the precipitate-strengthened Ni-Ti SMAs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗