Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Particle acceleration in solar flares by cyclotron damping of cascading turbulence

It is pointed out that cyclotron damping of cascading turbulence can be a very efficient acceleration process because the turbulence is generally damped by the suprathermal tail of the particle distribution. Using a simplified approach to the transfer of wave energy down the spectrum, analytic time-dependent solutions are derived which describe the growth of the tail and its effect back on the turbulence. They suggest that with this mechanism, a sizable fraction of all the available energy ends up in a very small minority of the particles at the flare site, in accord with observations. Preferential acceleration of heavy elements is generally expected. The enhancement mechanism is very sensitive; and if He-3 is preaccelerated by even a modest amount, it could be enhanced by many orders of magnitude, as observed in some flares.

Eichler, D.↗

Laboratory studies of the charge neutralization of a rocket payload during electron beam emission

The charge neutralization of an electrically-isolated rocket payload emitting an energetic electron beam has been studied in experiments in the large vacuum chamber at Johnson Space Center. The introduction of an RF-discharge-produced ambient plasma density (10,000 to 50,000 per cu cm) reduces the payload potential to 200 V for low current (1 and 10 ma) beams. The ignition of the beam-plasma discharge provides an efficient neutralization process for higher current beams.

Bernstein, W.↗

Determination of optimum voltages of ion focusing devices using computer techniques

Electric potentials for two dimensional cross sections of ion focusing devices used in a mass spectrometer are calculated via a series of computer programs designed to compute potentials between areas of fixed voltages. Ion trajectories within these devices may be determined by computer and a histogram obtained which plots ion density against ion position along a plate of the focusing device. For each lens system, a plate voltage may be changed, the electric potentials recalculated, and a new histogram calculated in order to determine if the new voltage configuration has increased the device's efficiency. This process may be repeated until the optimum voltage values have been found for maximum particle transmission in each focusing device.

Eckstein, B. A.↗

Efficient solar cells by space processing

Thin films of electron beam evaporated silicon were deposited on molybdenum, tantalum, tungsten and molybdenum disilicide under ultrahigh vacuum conditions. Mass spectra from a quadrapole residual gas analyzer were used to determine the partial pressure of 13 residual gases during each processing step. Surface contamination and interdiffusion were monitored by in situ Auger electron spectrometry. The presence of phosphorus in the silicon was responsible for attaining elevated temperatures with silicide formations. Heteroepitaxial silicon growth was sensitive to the presence of oxygen during deposition, the rate and length of deposition as well as the substrate orientation.

Schmidt, F. A.↗

Process for purification of solids

A process for purifying solids, especially silicon, by melting and subsequent resolidification, is described. Silicon used in solar cell manufacturing is processed more efficiently and cost effectively.

Herzer, H.↗

Flameholding characteristics of a swept-strut H2 fuel-injector for scramjet applications

A series of direct-connect tests are conducted which simulate the flow around the center swept-strut fuel-injector of a scramjet engine module. The experimental geometry includes both perpendicular and parallel fuel injectors which are swept with respect to the upstream flow direction in a manner simulating the flow geometry in the combustion region of the scramjet module. Seven different strut injector geometries are evaluated for their performance, flameholding, and inlet-combustor interaction characteristics. The most efficient combustion process is exhibited by the configuration having the deepest step with perpendicular injector orifices located 3.5 to 4.5 step heights downstream from the step. However, long centerbody and staged injection configurations perform as equally well as the deep step configuration when evaluating only the amount of perpendicular fuel injection. Since the staged injection configuration exhibits the lowest ignition and flameholding limit, it is suggested that the optimum injection configuration should incorporate a deep step with staged injection in order to improve the low temperature autoignition-flameholding characteristics.

Northam, G. B.↗

Correlation of solar cell electrical properties with material characteristics of silicon cast by the ubiquitous crystallization process

Solar cells were fabricated using a conservative 'baseline' process on 1-3 Omega-cm p-type silicon from ingots cast by the ubiquitous crystallization process. Conversion efficiencies of the cells were measured, as well as spectral response and minority carrier diffusion length. Adjacent slices from the same ingot were studied for their grain size, dislocation distribution, and impurity distribution. Cell performance was related to the observed structural features, as well as to the chemical structure of the ingot.

Hyland, S.↗

Proceedings of the Flat-plate Solar Array Project Research Forum on the High-speed Growth and Characterization of Crystals for Solar Cells

The High-Speed Growth and Characterization of Crystals for Solar Cells Research Forum was held on July 25-27, 1983, at the Sandpiper Bay Hotel in ort St. Lucie, Florida. The Research Forum was arranged into eight interactive sessions and addressed theoretical and experimental phenomena, applications, and characterization including stress/strain and other problem areas that limit the rate of growth of crystals suitable for processing into efficient, cost-effective solar cells. The Flat-Plate Solar Array Project of the Jet Propulsion Laboratory sponsored the meeting: Thirty-five invited papers were presented. Discussion periods followed each presentation. These Proceedings are a record of the papers and the discussions.

Katherine A. Dumas↗

Acceleration of cosmic rays in supernova-remnants

It is commonly accepted that supernova-explosions are the dominant source of cosmic rays up to an energy of 10 to the 14th power eV/nucleon. Moreover, these high energy particles provide a major contribution to the energy density of the interstellar medium (ISM) and should therefore be included in calculations of interstellar dynamic phenomena. For the following the first order Fermi mechanism in shock waves are considered to be the main acceleration mechanism. The influence of this process is twofold; first, if the process is efficient (and in fact this is the cas) it will modify the dynamics and evolution of a supernova-remnant (SNR), and secondly, the existence of a significant high energy component changes the overall picture of the ISM. The complexity of the underlying physics prevented detailed investigations of the full non-linear selfconsistent problem. For example, in the context of the energy balance of the ISM it has not been investigated how much energy of a SN-explosion can be transfered to cosmic rays in a time-dependent selfconsistent model. Nevertheless, a lot of progress was made on many aspects of the acceleration mechanism.

Dorfi, E. A.↗

Predicting Aircraft Spray Patterns on Crops

Agricultural Dispersion Prediction (AGDISP) system developed to predict deposition of agricultural material released from rotary- and fixed-wing aircraft. AGDISP computes ensemble average mean motion resulting from turbulent fluid fluctuations. Used to examine ways of making dispersal process more efficient by insuring uniformity, reducing waste, and saving money. Programs in AGDISP system written in FORTRAN IV for interactive execution.

Teske, M. E.↗

A single chip VLSI Reed-Solomon decoder

A new VLSI design of a pipeline Reed-Solomon decoder is presented. The transform decoding technique used in a previous design is replaced by a time domain algorithm. A new architecture that implements such an algorithm permits efficient pipeline processing with minimum circuitry. A systolic array is also developed to perform erasure corrections in the new design. A modified form of Euclid's algorithm is implemented by a new architecture that maintains the throughput rate with less circuitry. Such improvements result in both enhanced capability and a significant reduction in silicon area, therefore making it possible to build a pipeline (31,15)RS decoder on a single VLSI chip.

Shao, H. M.↗

Na/beta-alumina/NaAlCl4, Cl2/C circulating cell

A study was made of a high specific energy battery based on a sodium negative electrode and a chlorine positive electrode with molten AlCl3-NaCl electrolyte and a solid beta alumina separator. The basic performance of a Na beta-alumina NaAlCl4, Cl2/C circulating cell at 200 C was demonstrated. This cell can be started at 150 C. The use of melting sodium chloroaluminate electrolyte overcomes some of the material problems associated with the high working temperatures of present molten salt systems, such as Na/S and LiAl/FeS, and retains the advantages of high energy density and relatively efficient electrode processes. Preliminary investigations were conducted on a sodium-chlorine static cell, material compability, electrode design, wetting, and theoretical calculations to assure a better chance of success before assembling a Na/Cl2 circulating cell. Mathematical models provide a theoretical explanation for the performance of the NaCl2 battery. The results of mathematical models match the experimental results very well. According to the result of the mathematical modeling, an output at 180 mA/sq cm and 3.2 V can be obtained with optimized cell design.

Cherng, Jing-Yih↗

A full potential rotor analysis with wake influence using an inner-outer domain technique

A three-dimensional, quasi-steady, full potential flow solver was adapted to include realistic rotor wake influence for the aerodynamic analysis of helicopter rotors. The method uses an inner/outer domain technique to accommodate wake effects. Nonlinear flow is computed in the inner domain using a finite difference solution method. The wake is modeled using prescribed wake techniques to allow for the inclusion of realistic wake geometries. Portions of the wake passing inside the inner domain are treated using an embedded vortex technique. The procedure couples the wake influence with the inner domain solution in a consistent and efficient solution process. Correlation with measured lifting transonic data in hover and forward flight is shown which demonstrates the merits of the approach.

Egolf, T. A.↗

Controlled Ecological Life Support System: Regenerative Life Support Systems in Space

A wide range of topics related to the extended support of humans in space are covered. Overviews of research conducted in Japan, Europe, and the U.S. are presented. The methods and technologies required to recycle materials, especially respiratory gases, within a closed system are examined. Also presented are issues related to plant and algal productivity, efficiency, and processing methods. Computer simulation of closed systems, discussions of radiation effects on systems stability, and modeling of a computer bioregenerative system are also covered.

Macelroy, Robert D.↗

A full potential flow analysis with realistic wake influence for helicopter rotor airload prediction

A 3-D, quasi-steady, full potential flow solver was adapted to include realistic wake influence for the aerodynamic analysis of helicopter rotors. The method is based on a finite difference solution of the full potential equation, using an inner and outer domain procedure for the blade flowfield to accommodate wake effects. The nonlinear flow is computed in the inner domain region using a finite difference solution method. The wake is modeled by a vortex lattice using prescribed geometry techniques to allow for the inclusion of realistic rotor wakes. The key feature of the analysis is that vortices contained within the finite difference mesh (inner domain) were treated with a vortex embedding technique while the influence of the remaining portion of the wake (in the outer domain) is impressed as a boundary condition on the outer surface of the finite difference mesh. The solution procedure couples the wake influence with the inner domain solution in a consistent and efficient solution process. The method has been applied to both hover and forward flight conditions. Correlation with subsonic and transonic hover airload data is shown which demonstrates the merits of the approach.

Egolf, T. Alan↗

On the VLSI design of a pipeline Reed-Solomon decoder using systolic arrays

A new very large scale integration (VLSI) design of a pipeline Reed-Solomon decoder is presented. The transform decoding technique used in a previous article is replaced by a time domain algorithm through a detailed comparison of their VLSI implementations. A new architecture that implements the time domain algorithm permits efficient pipeline processing with reduced circuitry. Erasure correction capability is also incorporated with little additional complexity. By using a multiplexing technique, a new implementation of Euclid's algorithm maintains the throughput rate with less circuitry. Such improvements result in both enhanced capability and significant reduction in silicon area.

Shao, H. M.↗

Definition of an auxiliary processor dedicated to real-time operating system kernels

In order to increase the efficiency of process control data processing, it is necessary to enhance the productivity of real time high level languages and to automate the task administration, because presently 60 percent or more of the applications are still programmed in assembly languages. This may be achieved by migrating apt functions for the support of process control oriented languages into the hardware, i.e., by new architectures. Whereas numerous high level languages have already been defined or realized, there are no investigations yet on hardware assisted implementation of real time features. The requirements to be fulfilled by languages and operating systems in hard real time environment are summarized. A comparison of the most prominent languages, viz. Ada, HAL/S, LTR, Pearl, as well as the real time extensions of FORTRAN and PL/1, reveals how existing languages meet these demands and which features still need to be incorporated to enable the development of reliable software with predictable program behavior, thus making it possible to carry out a technical safety approval. Accordingly, Pearl proved to be the closest match to the mentioned requirements.

Halang, Wolfgang A.↗

A computational strategy for making complicated structural problems simple

An effective computational strategy is presented for the analysis of large and complex structures. The strategy is based on generating the response of the complex structure using large perturbations from that of a lower-order (simpler) model associated with a simpler structure (or a simpler mathematical/discrete model of the original structure). The three key elements of the strategy are: (a) mixed (or primitive variable) formulation with the fundamental unknowns consisting of generalized displacements and stress parameters; (2) operator splitting, or a reduction method to relate the arrays and degrees of freedom of the original complex structure ot those of the simpler system; and (3) efficient iterative process for the generation of the response of the complex structure starting from that of the simpler system. The effectiveness of the proposed strategy is demonstrated by means of two numerical examples.

Noor, Ahmed K.↗