Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Performance Gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Considerations for NSLS-II Synchrotron Radiation Protection When Operating Damping Wigglers at Low Machine Energy

The NSLS-II storage ring vacuum chamber, including frontends (FE) and beamlines (BL), is protected from possible damage from synchrotron radiation (SR) emitted from insertion devices (IDs) by a dedicated active interlock system (AIS). The system monitors electron beam position and angle and triggers a beam dump if the beam orbit is outside of the active interlock envelope (AIE). The AIE was calculated under the assumptions of 3 GeV beam energy and ID gaps set to their minimum operating values (i.e. “fully closed”). Recently it was proposed to perform machine studies that would ramp the stored beam energy significantly below the nominal operational value of 3 GeV. These studies may potentially include the use of NSLS-II damping wigglers (DWs) for electron beam emittance reduction and control. These DWs have the minimum operating gap of g min =15 mm with the corresponding peak magnetic field B 0 =1.8 T. During regular machine operations or studies at 3 GeV, DWs are usually held at this minimum gap (thus maximum field), or, alternatively, they are fully opened to the gap of 150 mm, which corresponds to a negligible residual magnetic field. However, any intermediate values of wiggler gap can be easily set through the control system with micron level precision, so wiggler fields in the range of 0< B < B 0 can be precisely set and maintained. For the low energy studies two likely modes of DW operation must be considered: 1) the maximum allowable wiggler filed is proportional to the storage ring energy, B ( E )= B 0 E /E 0 ; and 2) the maximum allowable wiggler field (and thus the minimum allowable gap) is energy independent and is equal to its nominal 3 GeV value of 1.8 T (i.e. wiggler gap is fixed at 15 mm). The aim of this technical note is to consider the synchrotron radiation protection (SRP) implications of DW use during low energy machine studies, when DWs are operated in either of these two modes. For consistency with earlier SRP documents we will quote all the powers and power densities at the nominal NSLS-II design beam current of 500 mA, even though the low energy studies will be done at significantly lower beam currents, hence the SR power will be proportionally smaller.

36 MATERIALS SCIENCE↗

Savings in Action: Lessons from Observed and Modeled Residential Solar Plus Storage Systems

The electric grid is rapidly evolving as small-scale, demand-side resources play increasingly important roles in grid operations and decarbonization. Maximizing the potential of demand-side resources involves incentivizing electricity customers to use those resources in ways that benefit the broader electrical grid. These incentives depend largely on the electricity cost savings that customers can realize from demand-side resource adoption. Determining these potential cost savings is a complex task. Cost savings depend on numerous factors, including the characteristics of different technologies, the algorithms that control these devices, system performance, customer behavior, electricity rate structures, and climatic factors. Another challenge is that estimated cost savings are frequently based on modeled rather than observed system performance, particularly in the academic literature. In this study, we begin to fill the gap in empirical research of demand-side resources using data from a new construction residential community equipped with rooftop solar and storage (S+S) in Arizona. We use these data to analyze the factors that determine customer electricity cost savings and emissions impacts of S+S in the real world. We then compare these data to modeled system performance to understand how models deviate from real-world outcomes. Based on these findings, we explore ways to improve such models and, conversely, use modeled results to suggest improvements to actual S+S deployment. The results of these analyses can be summarized in four key findings: 1) rate structures play a central role in the grid and customer value of demand-side resources; 2) certain customers can benefit more from demand-side resource adoption than others; 3) modeled battery dispatch and sizing reveals opportunities for additional cost savings; and 4) optimal dispatches can reduce grid emissions while maximizing bill savings.

14 SOLAR ENERGY↗

Tuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers

Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) and Mo(tfd-CO 2 Me) 3 . Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F 4 TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO 2 Me) 3 . Although the F 4 TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO 2 Me) 3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO 2 Me) 3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F 4 TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.

Conjugated polymers↗

Interface Evolutionand Long-Term Performance of NegativeCarbon Fiber Structural Electrodes

Abstract Laminated structural batteries present a transformative solution to reducing weight constraints in electric vehicles. These structural batteries are based on a multifunctional material that incorporates an energy storage function within a carbon fiber-reinforced polymer. Despite the potential of this technology, the intricate morphology of fiber–matrix or electrode–electrolyte interfaces and the impact of long-term cycling at low current rates (C-rates) on these interfaces remain insufficiently understood. This study addresses these critical knowledge gaps by examining the influence of matrix composition on the long-term electrochemical performance of structural battery electrodes and exploring advanced techniques to investigate carbon fiber–matrix interfaces. Localized imaging and X-ray scattering techniques were used to characterize morphological changes at the electrode–electrolyte interfaces by analyzing negative structural electrodes. The findings revealed that the matrix composition influences long-term electrochemical behavior and fiber–matrix interface formation. While the intrinsic properties of carbon fibers largely remain unaffected by long-term cycling, cycling promotes debonding at fiber–matrix interfaces. Nonetheless, residual regions of adhesion persist, underscoring the potential for preserving multifunctionality even under prolonged cycling conditions. These insights advance the understanding of interface dynamics, which is critical for optimizing structural battery technologies.

Chemistry↗

Overview of the United States department of energy's used fuel disposition research and development campaign

The United States Department of Energy (US DOE) is conducting research and development (R and D) activities within the Used Fuel Disposition Campaign (UFDC) to support storage, transportation, and disposal of used nuclear fuel (UNF) and wastes generated by existing and future nuclear fuel cycles. R and D activities are ongoing at nine national laboratories, and are divided into two major topical areas: (1) storage and transportation research, and (2) disposal research. Storage R and D focuses on closing technical gaps related to extended storage of UNF. For example, uncertainties remain regarding high-burnup nuclear fuel cladding performance following possible hydride reorientation and creep deformation, and also regarding long-term canister integrity. Transportation R and D focuses on ensuring transportability of UNF following extended storage, addressing data gaps regarding nuclear fuel integrity, retrievability, and demonstration of subcriticality. Disposal R and D focuses on identifying multiple viable geologic disposal options and addressing technical challenges for generic disposal concepts in various host media (e.g., mined repositories in salt, clay/shale, and granitic rocks, and deep borehole disposal in crystalline rock). R and D will transition to site-specific challenges as national policy advances. R and D goals at this stage are to increase confidence in the robustness of generic disposal concepts, to reduce generic sources of uncertainty that may impact the viability of disposal concepts, and to develop science and engineering tools that will support the selection, characterization, and ultimately licensing of a repository. The US DOE has also initiated activities that can be conducted within the constraints of the Nuclear Waste Policy Act to facilitate the development of an interim storage facility and supporting transportation infrastructure. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanical design of 56 MHz superconducting RF cavity for RHIC collider

A 56 MHz Superconducting RF Cavity operating at 4.4K is being constructed for the RHIC collider. This cavity is a quarter wave resonator with beam transmission along the centerline. This cavity will increase collision luminosity by providing a large longitudinal bucket for stored bunches of RHIC ion beam. The major components of this assembly are the niobium cavity with the mechanical tuner, its titanium helium vessel and vacuum cryostat, the support system, and the ports for HOM and fundamental dampers. The cavity and its helium vessel must meet equivalent safety with the ASME pressure vessel code and it must not be sensitive to frequency shift due to pressure fluctuations from the helium supply system. Frequency tuning achieved by a two stage mechanical tuner is required to meet performance parameters. This tuner mechanism pushes and pulls the tuning plate in the gap of niobium cavity. The tuner mechanism has two separate drive systems to provide both coarse and fine tuning capabilities. This paper discusses the design detail and how the design requirements are met.

43 PARTICLE ACCELERATORS↗

High thermoelectric performance in (Bi 0.25 Sb 0.75 ) 2 Te 3 due to band convergence and improved by carrier concentration control

Bi 2 Te 3 has been recognized as an important cooling material for thermoelectric applications. Yet its thermoelectric performance could still be improved. Here we propose a band engineering strategy by optimizing the converging valence bands of Bi 2 Te 3 and Sb 2 Te 3 in the (Bi 1-x Sb x ) 2 Te 3 system when x = 0.75. Band convergence successfully explains the sharp increase in density-of-states effective mass yet relatively constant mobility and optical band gap measurement. This band convergence picture guides the carrier concentration tuning for optimum thermoelectric performance. To synthesize homogeneous textured and optimally doped (Bi 0.25 Sb 0.75 ) 2 Te 3 , excess Te was chosen as the dopant. Uniform control of the optimized thermoelectric composition was achieved by zone-melting which utilizes separate solidus and liquidus compositions to obtain zT = 1.05 (at 300 K) without nanostructuring.

36 MATERIALS SCIENCE↗

Recovery Act: Oxy-Combustion Technology Development for Industrial-Scale Boiler Applications. Task 4 - Testing in Alstom's 15 MW th Boiler Simulation Facility

Alstom Power Inc. (Alstom), under U.S. DOE/NETL Cooperative Agreement No. DE-NT0005290, is conducting a development program to generate detailed technical information needed for application of oxy-combustion technology. The program is designed to provide the necessary information and understanding for the next step of large-scale commercial demonstration of oxy combustion in tangentially fired boilers and to accelerate the commercialization of this technology. The main project objectives include: Design and develop an innovative oxyfuel system for existing tangentially-fired boiler units that minimizes overall capital investment and operating costs; Evaluate performance of oxyfuel tangentially fired boiler systems in pilot scale tests at Alstom’s 15 MWth tangentially fired Boiler Simulation Facility (BSF); Address technical gaps for the design of oxyfuel commercial utility boilers by focused testing and improvement of engineering and simulation tools; Develop the design, performance and costs for a demonstration scale oxyfuel boiler and auxiliary systems; Develop the design and costs for both industrial and utility commercial scale reference oxyfuel boilers and auxiliary systems that are optimized for overall plant performance and cost; and, Define key design considerations and develop general guidelines for application of results to utility and different industrial applications. The project was initiated in October 2008 and the scope extended in 2010 under an ARRA award. The project is scheduled for completion by April 30, 2014. Central to the project is 15 MWth testing in the BSF, which provided in-depth understanding of oxy-combustion under boiler conditions, detailed data for improvement of design tools, and key information for application to commercial scale oxy-fired boiler design. Eight comprehensive 15 MWth oxy-fired test campaigns were performed with different coals, providing detailed data on combustion, emissions, and thermal behavior over a matrix of fuels, oxy-process variables and boiler design parameters. Significant improvement of CFD modeling tools and validation against 15 MWth experimental data has been completed. Oxy-boiler demonstration and large reference designs have been developed, supported with the information and knowledge gained from the 15 MWth testing. This report addresses the results from the 15 MWth testing in the BSF.

01 COAL, LIGNITE, AND PEAT↗

Recovery Act: Oxy-Combustion Technology Development for Industrial-Scale Boiler Applications

Alstom Power Inc. (Alstom), under U.S. DOE/NETL Cooperative Agreement No. DE-NT0005290, is conducting a development program to generate detailed technical information needed for application of oxy-combustion technology. The program is designed to provide the necessary information and understanding for the next step of large-scale commercial demonstration of oxy combustion in tangentially fired boilers and to accelerate the commercialization of this technology. The main project objectives include: • Design and develop an innovative oxyfuel system for existing tangentially-fired boiler units that minimizes overall capital investment and operating costs. • Evaluate performance of oxyfuel tangentially fired boiler systems in pilot scale tests at Alstom’s 15 MWth tangentially fired Boiler Simulation Facility (BSF). • Address technical gaps for the design of oxyfuel commercial utility boilers by focused testing and improvement of engineering and simulation tools. • Develop the design, performance and costs for a demonstration scale oxyfuel boiler and auxiliary systems. • Develop the design and costs for both industrial and utility commercial scale reference oxyfuel boilers and auxiliary systems that are optimized for overall plant performance and cost. • Define key design considerations and develop general guidelines for application of results to utility and different industrial applications. The project was initiated in October 2008 and the scope extended in 2010 under an ARRA award. The project completion date was April 30, 2014. Central to the project is 15 MWth testing in the BSF, which provided in-depth understanding of oxy-combustion under boiler conditions, detailed data for improvement of design tools, and key information for application to commercial scale oxy-fired boiler design. Eight comprehensive 15 MWth oxy-fired test campaigns were performed with different coals, providing detailed data on combustion, emissions, and thermal behavior over a matrix of fuels, oxyprocess variables and boiler design parameters. Significant improvement of CFD modeling tools and validation against 15 MWth experimental data has been completed. Oxy-boiler demonstration and large reference designs have been developed, supported with the information and knowledge gained from the 15 MWth testing. The results from the 15 MWth testing in the BSF and complimentary bench-scale testing are addressed in this volume (Volume II) of the final report. The results of the modeling efforts (Volume III) and the oxy boiler design efforts (Volume IV) are reported in separate volumes.

42 ENGINEERING↗

Human Factors and Behavioral Performance Exploration Measures Harmonized Across HERA, NEK, and ISS: Teams Risk

BACKGROUNDThe Human Factors and Behavioral Performance Exploration Measures (HFBP-EM) suite is a set of standardized measures to assess behavioral health and performance risk related to future exploration class missions, and to support reduction of the Human Research Program’s (HRP) Behavioral Medicine (BMed), Team, Sleep, and Human Systems Integration Architecture risks. HFBP-EM were collected during Human Exploration Research Analogs (HERA) campaigns 4 (C4) and 5 (C5), and during SIRIUS 17 and 19 missions in the Russian Ground Based Experiment Complex, NEK, to document the feasibility, flexibility, and acceptability of these measures in analogsof the spaceflight environment. A subset of the HFBP-EM suite was collected during spaceflight as part HRP’s Standard Measures in Spaceflight Project. Whenever possible, the HFBP-EM protocol and measures are kept the same across studies, however, differences across research settings (e.g., experimental manipulations, mission scenarios, mission length) and implementation of the measures require the data are harmonized to ensure comparable views across missions. The purpose of our project is to develop a harmonized database of HFBP-EM data from different settings, and to summarize the trajectory of behavioral health and performance within and between research settings. In this presentation, we will summarize the harmonized dataset and the trajectory of measures related to the Team Risk, including team performance, team cohesion, team processes, and psychological safety, over time and between and within settings.METHODSWe followed best practices for data harmonization. Characteristics of each research setting were assessed for harmonization potential, and we deemed NEK-SIRIUS 17 as inappropriate due to study aims, length, and data quality. Common variables of interest were identified. Study characteristics and key variables with which datafiles could be merged were defined as “meta-data.” HFBP-EM data from all settings were processed under a common format. We then created a harmonized team-level database designed to facilitate analyses that address HRP research gaps related to HRP’s Team risk. In this database, team cohesion, processes, performance, psychological safety, and group living were operationalized as the team mean of the crew responses for each data collection (e.g., on mission day 7). Data collected on the International Space Station (ISS) included a subset of scale items administered to participants. Data collected from ISS team members within +/- 7 days of the first data collection and every following 30 +/-4 days were aggregated to the team level. We generated figures that display the mean and variability of team constructs across research settings. We also generated plots of changes in team constructs with mission day and with percentage of the mission completed. Where possible, we compared data from spaceflight analogs with data from astronauts aboard the ISS. RESULTS AND DISCUSSIONThe team-level harmonized database was structured such that each row represents data for a team on a specific mission day. Team constructs (e.g., team cohesion) were included as columns (i.e., wide format) with repeated measures across mission days given in rows (i.e., long format). The database included data from 18 crews: five, 4-person American crews in HERA C4, four 4-person American crews in HERA C5, one 6-person multinational crew in NEK-SIRIUS 19, and eight, 2–11-person multinational crews aboard the ISS. Results provide insights into mission and campaign differences in team functioning and performance. For example, between campaign differences were observed for team processes—the interdependent team actions that orchestrate taskwork in pursuit of the team’s goals [1]. Greater between-team variability on team processes was detected during HERA C4 than during C5, and a downward trend was observed over the duration of C4, but not C5 or SIRIUS 19. This may be due to the campaign-level differences such as the sleep deprivation implemented during C4. Responses on the subset of team process items administered on the ISS indicate between-crew variability more like those observed in C4 than C5 and NEK, with some, but not all ISS crews demonstrating a downward trend over time. Additional findings will be presented. REFERENCESMarks, M. A., et al (2001) Academy of Management Review, 26(3), 356-376.

S T Bell↗

Distinguishing erbium dopants in Y 2 O 3 by site symmetry: Ab initio theory of two spin-photon interfaces

Here, we present a first-principles study of the defect formation and electronic structure of erbium (Er)–doped yttria (Y 2 O 3 ). This is an emerging material for spin-photon interfaces in quantum information science due to the narrow-linewidth optical emission from Er dopants at standard telecommunication wavelengths and their potential for quantum memories and transducers. We calculate formation energies of neutral and negatively and positively charged Er dopants and find the charge-neutral configuration to be the most stable, consistent with experiment. Of the two substitutional sites of Er for Y, the C 2 (more relevant for quantum memories) and C 3i (more relevant for quantum transduction), we identify the former as possessing the lowest formation energy. The electronic properties are calculated using the Perdew-Burke-Ernzerhof functional along with the Hubbard U parameter and spin-orbit coupling, which yields a ~ 6 μ B orbital and a ~ 3 μ B spin magnetic moment, and 11 electrons in the Er 4 f shell, confirming the formation of charge-neutral Er 3+ . This standard density functional theory approach underestimates the band gap of the host and lacks a first-principles justification for U . To overcome these issues we performed screened hybrid functional calculations, including a negative U for the 4 f orbitals, with mixing (α) and screening (w) parameters. These produced robust electronic features with slight modifications in the band gap and the 4 f splittings depending on the choice of tuning parameters. We also computed the many-particle electronic excitation energies and compared them with experimental values from photoluminescence.

36 MATERIALS SCIENCE↗

Photoelectrochemical performances of n-CdS{sub 1-x}Se{sub x} thin films prepared by spray pyrolysis technique

The CdS{sub 1-x}Se{sub x} (0.0 {<=} x {<=} 1.0) thin films of various compositions have been deposited onto the amorphous and FTO coated glass substrates using a spray pyrolysis technique. An electrode/electrolyte interface has been formed between an n-type CdS{sub 1-x}Se{sub x} (0.0 {<=} x {<=} 1.0) alloyed/mixed type semiconductor and a sulphide/polysulphide redox electrolyte and investigated through the current-voltage, capacitance-voltage and photovoltaic power output characteristics. The dependence of the dark current through the junction and the junction capacitance on the voltage across the junction have been examined and analysed. Upon illumination of the interface with a light of 20 mW/cm{sup 2}, an open-circuit voltage of the order of 335 mV and a short-circuit current of 1.02 mA/cm{sup 2} have been developed (for x = 0.8), which results in energy conversion efficiency and fill factor 0.79% and 0.46% respectively. The magnitudes of the barrier heights at the interfaces have been determined. The significant electrochemical properties have been observed for a cell with electrode composition x = 0.8. (author)

14 SOLAR ENERGY↗

Current Domain Challenges in the Emergency Response Community

This paper describes the development of a framework targeted to technology providers in order to better understand the grand domain challenges of the emergency response and management community (EM). In developing this framework, Pacific Northwest National Laboratory researchers interviewed subject matter experts (SMEs) across the EM domain and corroborated these findings with current literature. We are currently examining relationships and dependencies within the framework. A thorough understanding of these gaps and dependencies will allow for a more informed approach prioritizing research, developing tools, and applying technology to enhance performance in the EM community.

99 GENERAL AND MISCELLANEOUS↗

Effect of the quantum well thickness on the performance of InGaN photovoltaic cells

We report on the influence of the quantum well thickness on the effective band gap and conversion efficiency of In{sub 0.12}Ga{sub 0.88}N/GaN multiple quantum well solar cells. The band-to-band transition can be redshifted from 395 to 474 nm by increasing the well thickness from 1.3 to 5.4 nm, as demonstrated by cathodoluminescence measurements. However, the redshift of the absorption edge is much less pronounced in absorption: in thicker wells, transitions to higher energy levels dominate. Besides, partial strain relaxation in thicker wells leads to the formation of defects, hence degrading the overall solar cell performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An Approach for Performance Assessments of Extravehicular Activity Gloves

The Space Suit Assembly (SSA) Development Team at NASA Johnson Space Center has invested heavily in the advancement of rear‐entry planetary exploration suit design but largely deferred development of extravehicular activity (EVA) glove designs, and accepted the risk of using the current flight gloves, Phase VI, for unique mission scenarios outside the Space Shuttle and International Space Station (ISS) Program realm of experience. However, as design reference missions mature, the risks of using heritage hardware have highlighted the need for developing robust new glove technologies. To address the technology gap, the NASA Game‐Changing Technology group provided start‐up funding for the High Performance EVA Glove (HPEG) Project in the spring of 2012. The overarching goal of the HPEG Project is to develop a robust glove design that increases human performance during EVA and creates pathway for future implementation of emergent technologies, with specific aims of increasing pressurized mobility to 60% of barehanded capability, increasing the durability by 100%, and decreasing the potential of gloves to cause injury during use. The HPEG Project focused initial efforts on identifying potential new technologies and benchmarking the performance of current state of the art gloves to identify trends in design and fit leading to establish standards and metrics against which emerging technologies can be assessed at both the component and assembly levels. The first of the benchmarking tests evaluated the quantitative mobility performance and subjective fit of two sets of prototype EVA gloves developed ILC Dover and David Clark Company as compared to the Phase VI. Both companies were asked to design and fabricate gloves to the same set of NASA provided hand measurements (which corresponded to a single size of Phase Vi glove) and focus their efforts on improving mobility in the metacarpal phalangeal and carpometacarpal joints. Four test subjects representing the design‐to hand anthropometry completed range of motion, grip/pinch strength, dexterity, and fit evaluations for each glove design in pressurized conditions, with and without thermal micrometeoroid garments (TMG) installed. This paper provides a detailed description of hardware and test methodologies used and lessons learned.

Aitchison, Lindsay↗

NASA Crew Health & Performance Capability Development for Exploration: 2021 to 2022 Overview

Radiation, reduced gravity, distance from earth, isolation and confinement, and habitation within artificially created and controlled life support environments are hazards that present risk to human space explorers. In many cases, research is required to characterize those risks and help identify risk mitigation strategies. Where new capabilities are necessary to maintain crew health and performance (CHP) during exploration missions, a multi-step process is followed: 1) a Capability Gap is defined; 2) a plan or “roadmap” to develop that capability is established based on agency priorities and anticipated mission development timelines; and 3) work defined on the roadmap is then initiated as resources allow, with the objective that the capability will be available in time to support the future mission. Over the past year, significant progress has occurred in CHP technology development, ground testbed development, ground-based testing, and in preparations for ISS technology demonstrations. This paper provides a development update in the following capability areas: crew health countermeasures, EVA physiology and performance, food and nutrition, exploration medical capabilities, and radiation. Project overviews will include descriptions of CHP development activities over the past year, the human system risks and capability gaps being targeted, as well as planned follow-on activities and anticipated program infusion points.

Andrew F J Abercromby↗

Details of Adhering and Testing Artificial Ice Shapes to the High Lift Common Research Model in the National Transonic Facility

There is currently interest in conducting flight Reynolds number aerodynamic performance testing for iced airplane configurations. There has only been limited testing in the past, none of which has resulted in publicly available data. Consequently, there is virtually no documented knowledge for conducting icing related testing at flight Reynolds number where testing in cryogenic conditions is required. The National Transonic Facility (NTF) is a cryogenic wind tunnel at NASA Langley Research Center that is capable of achieving flight Reynolds numbers on subscale models. A large number of aerodynamic tests have been performed in this facility for uniced subscale model configurations. Through the collaborations associated with the High Lift Common Research Model, a test campaign was conducted to fill the existing research gaps with publicly available data. This resulted in a requirement that NASA develop a suitable level of competency for performing icing related tests in cryogenic environments. This document provides information about the challenges faced during the test campaign, how the issues were mitigated, and preserves the institutional knowledge gained by providing recommendations that will be used to reduce risk for future testing.

Iced Aerodynamics↗

Nuclear code case development of printed-circuit heat exchangers with thermal and mechanical performance testing

The U.S. Department of Energy has agreed to fund a three-year integrated research project to close technical gaps involved with compact heat exchangers to be used in nuclear applications. This paper introduces the goals of the project, the research institutions, and industrial partners working in collaboration to develop a draft Boiler and Pressure Vessel Code Case for this technology. Heat exchanger testing, as well as non-destructive and destructive evaluation, will be performed by researchers across the country to understand the performance of compact heat exchangers. Testing will be performed using coolants and conditions proposed for Gen IV Reactor designs. Preliminary observations of the mechanical failure mechanisms of the heat exchangers using destructive and non-destructive methods is presented. Unit-cell finite element models assembled to help predict the mechanical behavior of these high-temperature components are discussed as well. Performance testing methodology is laid out in this paper along with preliminary modeling results, an introduction to x-ray and neutron inspection techniques, and results from a recent pressurization test of a printed-circuit heat exchanger. The operational and quality assurance knowledge gained from these models and validation tests will be useful to developers of supercritical CO 2 systems, which commonly employ printed-circuit heat exchangers.

42 ENGINEERING↗