Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Two-plasmon decay mitigation in direct-drive inertial-confinement-fusion experiments using multilayer targets

Multilayer direct-drive inertial-confinement-fusion (ICF) targets are shown to significantly reduce two-plasmon-decay (TPD) driven hot-electron production while maintaining high hydrodynamic efficiency. Implosion experiments on the OMEGA Laser used targets with silicon layered between an inner beryllium and outer silicon-doped plastic ablator. A factor of five reduction in hot-electron generation (> 50 keV) was observed in the multilayer targets relative to pure CH targets. Three-dimensional simulations of the TPD driven hot-electron production using a laser-plasma interaction code (LPSE) that includes nonlinear and kinetic effects show excellent agreement with the measurements. As a result, the simulations suggest that the reduction in hot-electron production observed in the multilayer targets is primarily due to increased electron-ion collisional damping.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma etching of Hf-based high-k thin films. Part I. Effect of complex ions and radicals on the surface reactions

The effect of ion and radical compositions in BCl{sub 3}/Cl{sub 2} plasmas was assessed in this work with a focus on the formation of etch products in patterning hafnium aluminate, a potential high-k gate oxide material. The plasma composition became increasingly more complex as the percentage of boron trichloride was increased, which led to the formation of a significant amount of boron-containing species including B{sup +}, BCl{sup +}, BCl{sub 2}{sup +}, BCl{sub 3}{sup +}, B{sub 2}Cl{sub 3}{sup +}, and B{sub 2}OCl{sub 3}{sup +} in the plasma. The BCl{sub 2}{sup +} ions were found to be the dominant species in BCl{sub 3} containing plasmas at most conditions; however, increasing the pressure or decreasing the power led to an increase in the formation of higher mass ions. Several compositions of Hf{sub 1-x}Al{sub x}O{sub y} thin films ranging from pure HfO{sub 2} to pure Al{sub 2}O{sub 3} were etched in BCl{sub 3}/Cl{sub 2} plasmas as functions of ion energy and plasma composition. The etch product distributions were measured and the dominant metal-containing etch products were HfCl{sub x} and AlCl{sub x} in a Cl{sub 2} plasma and HfCl{sub x}, HfBOCl{sub 4}, and Al{sub x}Cl{sub y} in a BCl{sub 3} plasma, and their concentrations increased with increasing ion energy. Oxygen was detected removed in the form of ClO in Cl{sub 2} and as trichloroboroxin ((BOCl){sub 3}) in BCl{sub 3}. Both the etch rate and the etch product formation are enhanced in BCl{sub 3}/Cl{sub 2} plasmas, as compared to those in Cl{sub 2} plasmas, due to the change in the composition and reactivity of the dominant ions and radicals.

36 MATERIALS SCIENCE↗

A plasma deflagration accelerator as a platform for laboratory astrophysics

The replication of astrophysical flows in the laboratory is critical for isolating particular phenomena and dynamics that appear in complex, highly-coupled natural systems. Particularly, plasma jets are observed in astrophysical contexts at a variety of scales, typically at high magnetic Reynolds number and driven by internal currents. In this paper, we present detailed measurements of the plasma parameters within deflagration-produced plasma jets, the scaling of these parameters against both machine operating conditions and the corresponding astrophysical phenomena. Using optical and spectroscopic diagnostics, including Schlieren cinematography, we demonstrate the production of current-driven plasma jets of »100 km/s and magnetic Reynolds numbers of »100, and discuss the dynamics of their acceleration into vacuum. Finally, the results of this study will contribute to the reproduction of various types of astrophysical jets in the laboratory and indicate the ability to further probe active research areas such as jet collimation, stability, and interaction.

79 ASTRONOMY AND ASTROPHYSICS↗

A linear helicon plasma device with controllable magnetic field gradient

Current free double layers (CFDLs) are localized potential structures having spatial dimensions - Debye lengths and potential drops of more than local electron temperature across them. CFDLs do not need a current for them to be sustained and hence they differ from the current driven double layers. Helicon antenna produced plasmas in an expanded chamber along with an expanding magnetic field have shown the existence of CFDL near the expansion region. A helicon plasma device has been designed, fabricated, and installed in the Institute for Plasma Research, India to study the role of maximum magnetic field gradient as well as its location with respect to the geometrical expansion region of the chamber in CFDL formation. The special feature of this machine consisting of two chambers of different radii is its capability of producing different magnetic field gradients near the physical boundary between the two chambers either by changing current in one particular coil in the direction opposite to that in other coils and/or by varying the position of this particular coil. Although, the machine is primarily designed for CFDL experiments, it is also capable of carrying out many basic plasma physics experiments such as wave propagation, wave coupling, and plasma instabilities in a varying magnetic field topology. In this paper, we will present the details of the machine construction, its specialties, and some preliminary results about the production and characterization of helicon plasma in this machine.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Io's atmosphere and ionosphere - New limits on surface pressure from plasma models

The paper studies charge particle impact as a mechanism for the production of Io's ionosphere. Pioneer 10 thermal plasma measurements and magnetospheric plasma models which explain the observed spatial distribution of neutral hydrogen and sodium atoms in the vicinity of Jupiter's satellite Io imply electron fluxes of about 10 to the 10th/sq cm/s. The fluxes and the temperature (about 100 eV) of this plasma suggest that electron impact ionization is the dominant process in forming the ionosphere of Io. It is found that the surface number density of the neutral species required to match the observed electron density profiles is about 10 to the 9th/cu cm or less. This value is two orders of magnitude lower than previous estimates.

Johnson, T. V.↗

High density UO 2 and high thermal conductivity UO 2 composites by spark plasma sintering (SPS)

Embodiments of the invention are directed to a method for production of a nuclear fuel pellet by spark plasma sintering (SPS), wherein a fuel pellet with more than 80% TD or more than 90% TD is formed. The SPS can be performed with the imposition of a controlled uniaxial pressure applied at the maximum temperature of the processing to achieve a very high density, in excess of 95% TD, at temperatures of 850 to 1600° C. The formation of a fuel pellet can be carried out in one hour or less. In an embodiment of the invention, a nuclear fuel pellet comprises UO 2 and a highly thermally conductive material, such as SiC or diamond.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High density UO2 and high thermal conductivity UO2 composites by spark plasma sintering (SPS)

Embodiments of the invention are directed to a method for production of a nuclear fuel pellet by spark plasma sintering (SPS), wherein a fuel pellet with more than 80% TD or more than 90% TD is formed. The SPS can be performed with the imposition of a controlled uniaxial pressure applied at the maximum temperature of the processing to achieve a very high density, in excess of 95% TD, at temperatures of 850 to 1600° C. The formation of a fuel pellet can be carried out in one hour or less. In an embodiment of the invention, a nuclear fuel pellet comprises UO 2 and a highly thermally conductive material, such as SiC or diamond.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Endogenous and asymmetric magnetic reconnection with associated processes of relevance to fusion burning plasmas

We report an endogenous magnetic reconnection process is characterized by a driving factor that lays within the layer where a drastic change of magnetic field topology occurs. This kind of process is shown to take place in the presence of an electron temperature gradient in a well-confined plasma where, referring to quasi-collisionless regimes, the resulting electron temperature fluctuations can be anisotropic. Then a class of (radially) localized reconnecting modes is identified. These involve a transverse generated field $\tilde{B}_x$ of odd parity (as a function of the radial variable), and have finite (phase) velocities of propagation contrary to commonly considered reconnecting modes. The widths of the relevant reconnection layers remain significant even when large macroscopic distances are considered. Given that there are plasmas in the Universe with considerable electron thermal energy contents, these features can be relied upon in order to produce magnetic field generation, or conversion of magnetic energy into particle energy when the coupling of the localized odd modes to extended even modes can be significant. In any case, the resulting magnetic islands are not symmetric. With their excitation these modes can extract momentum from the main body of the plasma column which should recoil in the opposite direction. The excitation of antisymmetric endogenous modes is shown to be relevant to the electron temperature heating due to the reaction products in a fusion burning plasma as, in this case, the longitudinal thermal conductivity on selected rational magnetic surfaces can be decreased, relative to its collisional value, by the effects of reconnection. This kind of steepening is proposed to have a role in enhancing the growth rate of the instability involved in disruption events of the plasma column. The best agreement between theory and experiments concerning the onset of magnetic reconnection is (probably) represented by the theory of the internal kink mode. The observed accelerated reconnection rate following the onset is suggested as being explained by the formation of a relatively large magnetic island with a local steepening of the electron temperature gradient. A new kind of odd 'thermonuclear heating' mode associated with symmetric reconnection is identified.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Commercialization of microcavity plasma devices and arrays: Systems for VUV photolithography and nanopatterning, disinfection of drinking water and air, and biofilm deactivation for medical therapeutics

Abstract A little more than two decades after the introduction of the first microcavity plasma devices, a growing body of commercial products based on the remarkable properties of these low‐temperature, atmospheric plasmas is now available. Following a brief review of early microplasma lamp development, this article describes microplasma‐based devices and systems currently being manufactured for applications in photolithography, photopatterning, and other nanofabrication processes, such as atomic layer deposition, spectroscopic identification and analysis of materials (including wide bandgap crystals), the disinfection of drinking water in off‐grid communities, deactivating COVID‐19 and other pathogens in air and on surfaces in public spaces, and vacuum ultraviolet lamps for driving atomic clocks. The microplasma‐based treatment of otitis media in the human ear will also be discussed.

42 ENGINEERING↗

Low charge state heavy ion production with sub-nanosecond laser

We have investigated laser ablation plasma of various species using nanosecond and sub-nanosecond lasers for both high and low charge state ion productions. We found that with sub-nanosecond laser, the generated plasma has a long tail which has low charge state ions determined by an electrostatic ion analyzer even under the laser irradiation condition for highly charged ion production. This can be caused by insufficient laser absorption in plasma plume. This property might be suitable for low charge state ion production. We used a nanosecond laser and a sub-nanosecond laser for low charge state ion production to investigate the difference of generated plasma using the Zirconium target.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Preventing ash from poisoning proton–boron 11 fusion plasmas

Proton–boron 11 (pB11) fusion is safe and clean, but also difficult to harness for breakeven power production. Particularly deleterious are fusion-born alpha particles, which massively increase both plasma pressure and bremsstrahlung losses unless they are pulled promptly from the plasma. We show that even if one cannot extract the alphas quickly, one can still achieve net power production, by separating the plasma into two regions: a fusion region, accessible to all species, and an alpha storage region, accessible only to alphas and electrons. This new demixing strategy could make pB11 fusion much easier to achieve.

Ochs, Ian E. (ORCID:0000000260029169)↗

Status of the ELISE test facility

The test facility ELISE, equipped with a large radio frequency (RF) driven ion source (1×0.9 m2) of half the size of the ion source for the ITER neutral beam injection (NBI) system, is operational since beginning of 2013. The first experimental campaign was dedicated to a thorough qualification of the test facility and its diagnostic tools at low RF power (80 kW in total, i.e. 20 kW per driver) in volume operation, i.e. operation without cesium, where the negative hydrogen ion production is done in the plasma volume only. This paper reports on the main results of the second and third experimental campaigns, where Cs was inserted in the ion source for an enhancement of the negative ion production by the surface process. The second experimental campaign was done still with low RF power, both for hydrogen and deuterium, with pulse lengths of up to 500 s. The results of this campaign are rather encouraging, especially in hydrogen, where large current densities with respect to the low RF power could be achieved at a ratio of co-extracted electrons to extracted ions of 0.5-0.6 at the relevant source pressure of 0.3 Pa. Similar large extracted ion currents could be achieved also in deuterium, but with larger amounts of co-extracted electrons. The required ratio of co-extracted electrons to extracted ions of one could be achieved only in short pulses. The third experimental campaign aimed then for approaching the required ITER NBI parameters with respect to the ion and electron extracted currents, both for hydrogen and deuterium, by increasing the RF power with short pulses, i.e. beam-on times of up to 10 s and RF-on time up to 20 s. Current densities near the ITER NBI requirements could be achieved in hydrogen at a ratio of co-extracted electrons to extracted ions of 0.5-0.6 at the relevant source pressure of 0.3 Pa. As it was the case for the low RF operation, the required filter field was significantly lower than expected from the experience with the small prototype RF source. Similar large extracted ion currents could be achieved also in deuterium, but with larger amounts of co-extracted electrons; the main problem in deuterium operation are the non-stable currents of the co-extracted electrons, most probably caused by the high dynamic of the Cs redistribution in the system. The reasons for this larger instability are still under investigation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The SNS External Antenna H- Ion Source

The U.S. Spallation Neutron Source (SNS) is an accelerator-based, pulsed neutron-scattering facility, currently in the process of ramping up neutron production. In order to insure that we will meet our operational commitments as well as provide for future facility upgrades with high reliability, we have developed an RF-driven, H- ion source based on a ceramic aluminum nitride (AlN) plasma chamber [1]. This source is expected to be utilized by the SNS for neutron production starting in 2009. This report details the design of the production source which features an AlN plasma chamber, 2-layer external antenna, cooled-multicusp magnet array, Cs2CrO4 cesium system and a Molybdenum plasma ignition gun. Performance of the production source both on the SNS accelerator and SNS test stand is reported. The source has also been designed to accommodate an elemental Cs system with an external reservoir which has demonstrated unanalyzed beam currents up to ~100mA (60Hz, 1ms) on the SNS ion source test stand.

43 PARTICLE ACCELERATORS↗

Efficient cesiation in RF driven surface plasma negative ion source

Experiments on hydrogen negative ions production in the large radio-frequency negative ion source with cesium seed are described. The system of directed cesium deposition to the plasma grid periphery was used. The small cesium seed (∼0.5 G) provides an enhanced H{sup −} production during a 2 month long experimental cycle. The gradual increase of negative ion yield during the long-term source runs was observed after cesium addition to the source. The degraded H{sup −} production was recorded after air filling to the source or after the cesium washing away from the driver and plasma chamber walls. The following source conditioning by beam shots produces the gradual recovery of H{sup −} yield to the high value. The effect of H{sup −} yield recovery after cesium coverage passivation by air fill was studied. The concept of cesium coverage replenishment and of H{sup −} yield recovery due to sputtering of cesium from the deteriorated layers is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of the laser pulse irradiation point on a double layer target on the accelerated ion beam parameters

In proton acceleration by a laser pulse obliquely incident on a double layer target, it is shown by PIC simulations that the energy spread of the generated protons can be reduced by irradiating the laser pulse on to the off-center position of the target. This provides a way to control the proton energy spectrum. High energy protons are found to come from an area shifted from the initial target center towards the propagation direction of the laser pulse. We show that high energy protons with much smaller energy spread can be obtained by appropriately adjusting the size and position of the second proton layer.

43 PARTICLE ACCELERATORS↗

Contrast Effect on the Laser Injected Electron Beam

Laser-plasma interaction generates a high energy electron beam. The laser contrast ratio is one of the important parameters for laser acceleration due to pre-plasma effects. For the high laser contrast ratio, a 140 MeV monoenergetic electron beam with a charge of 100 pC is obtained. For the low laser contrast ratio; a low quality electron beam or no electron beam are generated, because the pre-pulse blowout plasma electrons and put into disorder the plasma before the main pulse interacting the plasma. The laser contrast ratio should be high in order to generate a high quality electron beam with a high charge.

43 PARTICLE ACCELERATORS↗

Laser Radiation Pressure Acceleration of Monoenergetic Protons in an Ultra-Thin Foil

We present theoretical and numerical studies of the acceleration of monoenergetic protons in a double layer formed by the laser irradiation of an ultra-thin film. The stability of the foil is investigated by direct Vlasov-Maxwell simulations for different sets of laser-plasma parameters. It is found that the foil is stable, due to the trapping of both electrons and ions in the thin laser-plasma interaction region, where the electrons are trapped in a potential well composed of the ponderomo-tive potential of the laser light and the electrostatic potential due to the ions, and the ions are trapped in a potential well composed of the inertial potential in an accelerated frame and the electrostatic potential due to the electrons. The result is a stable double layer, where the trapped ions are accelerated to monoenergetic energies up to 100 MeV and beyond, which makes them suitable for medical applications cancer treatment. The underlying physics of trapped and untapped ions in a double layer is also investigated theoretically and numerically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-Plasma Wakefield Acceleration with Higher Order Laser Modes

Laser-plasma collider designs point to staging of multiple accelerator stages at the 10 GeV level, which are to be developed on the upcoming BELLA laser, while Thomson Gamma source designs use GeV stages, both requiring efficiency and low emittance. Design and scaling of stages operating in the quasi-linear regime to address these needs are presented using simulations in the VORPAL framework. In addition to allowing symmetric acceleration of electrons and positrons, which is important for colliders, this regime has the property that the plasma wakefield is proportional to the transverse gradient of the laser intensity profile. We demonstrate use of higher order laser modes to tailor the laser pulse and hence the transverse focusing forces in the plasma. In particular, we show that by using higher order laser modes, we can reduce the focusing fields and hence increase the matched electron beam radius, which is important to increased charge and efficiency, while keeping the low bunch emittance required for applications.

43 PARTICLE ACCELERATORS↗