Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Influence of spin injection on the critical current density in La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/La{sub 1.85}Sr{sub 0.15}CuO{sub 4} heterostructure

The anisotropic polarized spin injection effect on the critical current density J{sub c} of La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/La{sub 1.85}Sr{sub 0.15}CuO{sub 4} heterostructure is systematically investigated. It is found that the contribution of δT{sub c} pinning mechanism is enhanced with spin injection. The angle dependent J{sub c}(θ) near H//c can be scaled by the Ginzburg-Landau (G-L) expression, while for H//ab the intrinsic pinning drives the data to deviate from the G-L fitting. The relative changes of J{sub c} affected by spin injection show opposite variation trends with increasing fields for H//ab and H//c, which is probably related to the different suppressions of injected spins on different flux pinnings.

36 MATERIALS SCIENCE↗

High critical currents in heavily doped (Gd,Y)Ba 2 Cu 3 O x superconductor tapes

REBa 2 Cu 3 O x superconductor tapes with moderate levels of dopants have been optimized for high critical current density in low magnetic fields at 77 K, but they do not exhibit exemplary performance in conditions of interest for practical applications, i.e., temperatures less than 50 K and fields of 2–30 T. Heavy doping of REBCO tapes has been avoided by researchers thus far due to deterioration in properties. Here, we report achievement of critical current densities (J c ) above 20 MA/cm 2 at 30 K, 3 T in heavily doped (25 mol. % Zr-added) (Gd,Y)Ba 2 Cu 3 O x superconductor tapes, which is more than three times higher than the J c typically obtained in moderately doped tapes. Pinning force levels above 1000 GN/m 3 have also been attained at 20 K. A composition map of lift factor in J c (ratio of J c at 30 K, 3 T to the J c at 77 K, 0 T) has been developed which reveals the optimum film composition to obtain lift factors above six, which is thrice the typical value. A highly c-axis aligned BaZrO 3 (BZO) nanocolumn defect density of nearly 7 × 10 11 cm –2 as well as 2–3nm sized particles rich in Cu and Zr have been found in the high J c films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid doubling of the critical current of YBa{sub 2}Cu{sub 3}O{sub 7−δ} coated conductors for viable high-speed industrial processing

We demonstrate that 3.5-MeV oxygen irradiation can markedly enhance the in-field critical current of commercial second generation superconducting tapes with an exposure time of just 1 s per 0.8 cm{sup 2}. The speed demonstrated here is now at the level required for an industrial reel-to-reel post-processing. The irradiation is made on production line samples through the protective silver coating and does not require any modification of the growth process. From TEM imaging, we identify small clusters as the main source of increased vortex pinning.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of BaZrO{sub 3} concentration as secondary phase in superconducting YBa{sub 2}Cu{sub 3}O{sub 7} for high current applications

We report the superconducting state properties of YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO) on introduction of BaZrO{sub 3} (BZO) as a secondary phase. YBCO+xBZO (x= 0, 2, 4, 6, and 10 wt%) composite samples were prepared by solid state reaction method and characterized for structural, morphological and superconducting properties. X-ray diffraction confirms the increased crystallinity and images of scanning electron microscopy measurement show an increase in both grain size and grain connectivity on addition of BZO in YBCO. These effects are well pronounced in an applied magnetic field. Critical current density, J{sub C}, as well as the pinning force peaks at 4% of BZO concentration showed significant difference. A three-fold enhancement in J{sub C} and a six-fold enhancement in pinning force were observed at this optimum BZO concentration. This has been attributed to the pinning of flux lines in YBCO due to introduction of BZO as a secondary phase. These results show that this composite has potential application in high current applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative differential resistance in GaN homojunction tunnel diodes and low voltage loss tunnel contacts

The current-voltage characteristics and metastability in GaN p++/n++ homojunction tunnel diodes and n++/p++/i/n tunnel-contacted diodes grown via metal modulated epitaxy have been reported on. The room temperature negative differential resistance (NDR) beginning at ~1.35 V is discussed for GaN homojunction devices grown on sapphire. The NDR vanishes, and the conductivity increases as multiple I-V sweeps are performed, thus implying that charge trapping states with long trap lifetimes exist at defect sites, and these traps play a crucial role in the tunneling mechanism. Additionally, the use of extremely high n-type (N D ~ 4.6×10 20 cm –3 ) and p-type (N A ~ 7.7×10 20 cm –3 ) doping results in a near linear characteristic with minimal rectification at current densities less than 200 A/cm 2 and soft rectification above this current density. Forward-bias tunneling and NDR are still present at 77 K. The highest silicon-doped n++/p++/i/n tunnel-contacted pin diode demonstrates a turn-on voltage of 3.12 V, only 0.14 V higher than that of the pin control diode, and an improved specific on-resistance of 3.24 ×10 –4 Ω cm 2 , which is 13% lower than that of the control pin diode.

42 ENGINEERING↗

MOOSE Reactor Module: An Open-Source Capability for Meshing Nuclear Reactor Geometries

The U.S. Department of Energy (DOE) Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has developed numerous physics solvers utilizing the open-source Multiphysics Object-Oriented Simulation Environment (MOOSE) framework for multiphysics reactor analysis. These solvers require input finite element meshes representing the discretized spatial domain. Typically, reactor analysts turn to licensed tools for the creation of reactor geometry meshes. Recently, open-source functionality has been added to the MOOSE framework to mesh common reactor geometries and improve MOOSE-based nuclear reactor application user workflows. The new functionality is primarily contained in the new Reactor module of MOOSE and includes support for hexagonal pins, assemblies, and cores, extended Cartesian geometry support, options for modeling static and rotating control drums within a hexagonal assembly, core periphery triangulation, and automatic tagging of pin, assembly, plane, and depletion regions for easier post processing of physics results. A set of reactor geometry mesh builder objects further streamlines the construction of hexagonal and Cartesian cores and allows mapping of materials to regions during mesh generation. The meshes produced with the MOOSE Reactor module may be used directly within MOOSE-based applications or exported as Exodus II files for use in other finite element solvers. The tools have been demonstrated and verified using a variety of NEAMS physics solvers on a range of reactor applications, including a sodium-cooled fast reactor core analysis using Griffin, a fast reactor assembly thermal deformation analysis using MOOSE Tensor Mechanics, and a heat pipe–cooled microreactor coupled analysis using Griffin, Bison, and Sockeye. MOOSE’s Reactor module provides significant advantages compared to the use of external meshing tools when analyzing Cartesian and hexagonal reactor lattices using MOOSE-based applications: immediate accessibility (open-source) to the end user, low barrier to entry for new users, speed of mesh generation, volume preservation of meshed fuel pins, and simplification of analysis workflow when used in conjunction with MOOSE-based applications.

99 GENERAL AND MISCELLANEOUS↗

PWR Core Analysis for Cycle Extension and Uprates with LEU+ Accident Tolerant Fuel and 80 GWd/Tonne Burnup Limit

The U.S. Nuclear Regulatory Commission has recently drafted a rule enabling fuel burnup increase in light water reactors up to 80 GWd/t. In conjunction with use of fuel enrichment up to 10%, and accident tolerant fuel (ATF), this is anticipated to facilitate 24-month cycles in PWRs, along with further power uprates. In this paper, PWR core analysis is performed for 20% increased PWR power output along with cycle extension up to 24 months, in combination with use of chromia-doped fuel and chromium-coated clad, considered to be the most near-term ATF concepts. In combination, these lead to challenging conditions with a core average discharge burnup of up to ~74 GWd/t, challenging even the 80 GWd/t burnup limit. Analysis is performed using the 2-step method with POLARIS (within SCALE) used for the lattice calculations and PARCS for the core calculations. Core designs are first baselined for current operating conditions (LEU, 62 GWd/t discharge burnup limit) and then derived that meet cycle constraints on power distribution and the updated lead pin discharge burnup limit while maintaining at least two batches of fuel in the core. Gadolina loadings in fuel pins of up to 8% are used, with enrichment zoning both within the core and, to a limited extent, within assemblies. Here, doped fuel with coated cladding can utilize the same core designs as the reference UOX cores, exhibiting slightly lower burnup due to higher fuel density, which also offsets the slight reactivity penalty from the doping and coating. For the analysis performed here, doped fuel enabled a core with 24-month cycle and 20% uprate to stay within the 80 GWd/t lead pin discharge burnup limit.

LEU+↗

A SUZAKU SEARCH FOR NONTHERMAL EMISSION AT HARD X-RAY ENERGIES IN THE COMA CLUSTER

The brightest cluster radio halo known resides in the Coma cluster of galaxies. The relativistic electrons producing this diffuse synchrotron emission should also produce inverse Compton emission that becomes competitive with thermal emission from the intracluster medium (ICM) at hard X-ray energies. Thus far, claimed detections of this emission in Coma are controversial. We present a Suzaku HXD-PIN observation of the Coma cluster in order to nail down its nonthermal hard X-ray content. The contribution of thermal emission to the HXD-PIN spectrum is constrained by simultaneously fitting thermal and nonthermal models to it and a spatially equivalent spectrum derived from an XMM-Newton mosaic of the Coma field. We fail to find statistically significant evidence for nonthermal emission in the spectra which are better described by only a single- or multitemperature model for the ICM. Including systematic uncertainties, we derive a 90% upper limit on the flux of nonthermal emission of 6.0 x 10{sup -12} erg s{sup -1} cm{sup -2} (20-80 keV, for {gamma} = 2.0), which implies a lower limit on the cluster-averaged magnetic field of B>0.15 {mu}G. Our flux upper limit is 2.5 times lower than the detected nonthermal flux from RXTE and BeppoSAX. However, if the nonthermal hard X-ray emission in Coma is more spatially extended than the observed radio halo, the Suzaku HXD-PIN may miss some fraction of the emission. A detailed investigation indicates that {approx}50%-67% of the emission might go undetected, which could make our limit consistent with that of Rephaeli and Gruber and Fusco-Femiano et al. The thermal interpretation of the hard Coma spectrum is consistent with recent analyses of INTEGRAL and Swift data.

79 ASTRONOMY AND ASTROPHYSICS↗

SUPERMODEL ANALYSIS OF THE HARD X-RAY EXCESS IN THE COMA CLUSTER

The Supermodel (SM) provides an accurate description of the thermal contribution by the hot intracluster plasma which is crucial for the analysis of the hard excess. In this paper, the thermal emissivity in the Coma cluster is derived starting from the intracluster gas temperature and density profiles obtained by the SM analysis of X-ray observables: the XMM-Newton temperature profile and the ROSAT brightness distribution. The SM analysis of the BeppoSAX/Phoswich Detector System (PDS) hard X-ray (HXR) spectrum confirms our previous results, namely, an excess at the confidence level (c.l.) of {approx}4.8{sigma} and a nonthermal (NT) flux of (1.30 {+-} 0.40) x 10{sup -11} erg cm{sup -2} erg cm{sup -1} in the energy range 20-80 keV. A recent joint XMM-Newton/Suzaku analysis reports an upper limit of {approx}6 x 10{sup -12} erg cm{sup -2} erg cm{sup -1} in the energy range 20-80 keV for the NT flux with an average gas temperature of 8.45 {+-} 0.06 keV and an excess of NT radiation at a c.l. above 4{sigma}, without including systematic effects, for an average XMM-Newton temperature of 8.2 keV in the Suzaku/HXD-PIN FOV, in agreement with our earlier PDS analysis. Here we present a further evidence of the compatibility between the Suzaku and BeppoSAX spectra, obtained by our SM analysis of the PDS data, when the smaller size of the HXD-PIN FOV and the two different average temperatures derived by XMM-Newton and by the joint XMM-Newton/Suzaku analysis are taken into account. The consistency of the PDS and HXD-PIN spectra reaffirms the presence of an NT component in the HXR spectrum of the Coma cluster. The SM analysis of the PDS data reports an excess at c.l. above 4{sigma} also for the higher average temperature of 8.45 keV thanks to the PDS FOV being considerably greater than the HXD-PIN FOV.

79 ASTRONOMY AND ASTROPHYSICS↗

Matching field effects at tesla-level magnetic fields in critical current density in high-Tc superconductors containing self-assembled columnar defects

We have investigated the superconductive transport properties of YBa2Cu3O7 films containing self-assembled columnar arrays of second phase SrZrO3 or BaSnO3 precipitates. A matching condition between columnar pinning sites (aligned at or near the c axis) and external magnetic flux, tilted with respect to them, is identified in the critical current JC.H/ data. The results for the material containing SrZrO3-based pins are analyzed within a simple intuitive model. At matching, the critical current is enhanced above the model prediction. In complementary contact-free investigations of BaSnO3-doped material, matching effects are observed over a wide range of temperatures in the field dependence of JC.H/. The deduced matching fields agree reasonably well with the densities of columnar pins directly observed by scanning electron microscopy.

Sinclair, J.↗

Self-healing patterns in ferromagnetic-superconducting hybrids

We study magnetic flux dynamic effects in a superconducting bridge with thin soft magnetic stripes placed either on top or under the bridge. Voltage-current (VI) measurements reveal that the edges of magnetic stripes oriented transvers or along the bridge introduce channels or barriers for vortex motion, resulting in the decrease or increase of the critical current, respectively. We demonstrate a remarkable self-healing effect whereby the magnetic pinning strength for the longitudinal stripes increases with current. The self-field of the current polarizes the magnetic stripes along their width, which enhances the stray fields at their edges and creates a dynamic vortex pinning landscape to impede vortex flow. Our results highlight new strategies to engineer adaptive pinning topologies in superconducting-ferromagnetic hybrids.

Vlasko-Vlasov, V. K.↗

Substantial reduction of the anisotropy in the critical current densities J c of Ni-doped CaKFe 4 As 4 single crystals by chemical and irradiation-induced disorder

Here, we demonstrate that the anisotropy in the critical current densities, J c , of CaK(Fe 1–x Ni x ) 4 As 4 (x = 0, 0.015, 0.025, and 0.030) single crystals reduces with increasing chemical and irradiation-induced disorder. The magnetic field dependences of J c are analyzed by performing magnetization measurements with H applied parallel and perpendicular to the crystallographic c-axis. The results show that undoped crystals display large anisotropies in Jc due to an enhancement of the vortex pinning with H applied parallel to the crystallographic ab-planes. This anisotropy reduces substantially as Ni addition increases. Moreover, we found that random disorder introduced by proton irradiation enhances mainly the vortex pinning for H parallel to the c-axis. Consequently, using adequate fluencies, the vortex pinning at low temperatures in both undoped and doped samples becomes close to isotropic. These results make the CaKFe 4 As 4 system promising for applications that require isotropic J c under magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence of Kramer extrapolation inaccuracy for predicting high field Nb 3 Sn properties

Future applications requiring high magnetic fields, such as the proposed Future Circular Collider, demand a substantially higher critical current density, J c , at fields ≥16 T than is presently available in any commercial strand, so there is a strong effort to develop new routes to higher J c Nb 3 Sn. As a consequence, evaluating the irreversibility field (H irr ) of any new conductor to ensure reliable performance at these higher magnetic fields becomes essential. To predict the irreversibility field for Nb 3 Sn wires, critical current measurements, I c , are commonly performed in the 12-15 T range and the Kramer extrapolation is used to predict higher field properties. Here, the Kramer extrapolation typically models the contribution only for sparse grain boundary pinning, yet Nb 3 Sn wires rely on a high density of grain boundaries to provide the flux pinning that enables their high critical current density. However, whole-field range VSM measurements up to 30 T recently showed for Nb 3 Sn RRP® wires that the field dependence of the pinning force curve significantly deviates from the typical grain boundary shape, leading to a 1-2 T overestimation of Hirr when extrapolated from the typical mid-field data taken only up to about 15 T. In this work we characterized a variety of both RRP® and PIT Nb 3 Sn wires by transport measurements up to 29 T at the Laboratoire National des Champs Magnétiques Intenses (LNCMI), part of the European Magnetic Field Laboratory in Grenoble, to verify whether or not such overestimation is related to the measurement technique and whether or not it is a common feature across different designs. Indeed we also found that when measured in transport the 12-15 T Kramer extrapolation overestimates the actual H irr in both types of conductor with an inaccuracy of up to 1.6 T, confirming that high field characterization is a necessary tool to evaluate the actual high field performance of each Nb 3 Sn wire.

36 MATERIALS SCIENCE↗

Development of a tagged source of Pb-206 nuclei

There is a particular class of unavoidable backgrounds that plague low-background experiments and rare event searches, particularly those searching for nuclear recoil event signatures: decaying daughters of the 238 U nuclear decay chain, which result from radon plate-out on detector materials. One such daughter isotope, 210 Po, undergoes α-decay and produces a recoiling 103 keV 206 Pb nucleus. In this study, to characterize this important background in the context of noble element detectors, we have implemented a triggered source for these 206 Pb recoils in a dual-phase xenon time projection chamber (Xe TPC) within the Davis Xenon R&D testbed system (DAX). By adhering 210 Po to the surface of a PIN diode and electrically floating the diode on the cathode of the TPC, we tag the α signals produced in the PIN diode and trigger on the correlated nuclear recoils in the liquid xenon (LXe). Lastly, we discuss our methods for 210 Po deposition, electronic readout of the PIN diode signals at high voltage, and analysis methods for event selection.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

INVESTIGATING SUPERCONDUCTIVITY IN NEUTRON STAR INTERIORS WITH GLITCH MODELS

The high-density interior of a neutron star is expected to contain superconducting protons and superfluid neutrons. Theoretical estimates suggest that the protons will form a type II superconductor in which the stellar magnetic field is carried by flux tubes. The strong interaction between the flux tubes and the neutron rotational vortices could lead to strong ''pinning'', i.e., vortex motion could be impeded. This has important implications especially for pulsar glitch models as it would lead to a large part of the vorticity of the star being decoupled from the ''normal'' component to which the electromagnetic emission is locked. In this Letter, we explore the consequences of strong pinning in the core on the ''snowplow'' model for pulsar glitches, making use of realistic equations of state and relativistic background models for the neutron star. We find that, in general, a large fraction of the pinned vorticity in the core is not compatible with observations of giant glitches in the Vela pulsar. Thus, the conclusion is that either most of the core is in a type I superconducting state or the interaction between vortices and flux tubes is weaker than previously assumed.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantitative study of two- and three-dimensional strong localization of matter waves by atomic scatterers

We study the strong localization of atomic matter waves in a disordered potential created by atoms pinned at the nodes of a lattice, for both three-dimensional (3D) and two-dimensional (2D) systems. The localization length of the matter wave, the density of localized states, and the occurrence of energy mobility edges (for the 3D system), are numerically investigated as a function of the effective scattering length between the atomic matter wave and the pinned atoms. Both positive and negative matter wave energies are explored. Interesting features of the density of states are discovered at negative energies, where maxima in the density of bound states for the system can be interpreted in terms of bound states of a matter wave atom with a few pinned atomic scatterers. In 3D we found evidence of up to three mobility edges, one at positive energies, and two at negative energies, the latter corresponding to transitions between extended and localized bound states. In 2D, no mobility edge is found, and a rapid exponential-like increase of the localization length is observed at high energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stochastic Dynamics of a Ferromagnetic Vortex Revealed by Single-Spin Magnetometry

We study the dynamics of a magnetic vortex in a permalloy disk, as it is switched between bistable pinning sites in the presence of room-temperature thermal noise. We use static and time-resolved magneto-optical Kerr-effect microscopy to characterize the equilibrium and nonequilibrium motion of the vortex in response to a train of magnetic field pulses. The limitations of this approach due to inhomogeneous averaging are overcome by using a proximal nitrogen-vacancy spin in diamond to probe the final position of the vortex core following a single magnetic field pulse. Repeating this single-shot measurement, we characterize the probability of switching between two bistable pinning sites as a function of pulse time. Here, we develop a simple model of the stochastic vortex trajectory through the pinning sites’ basins of attraction to understand how the separate contributions of damping and dephasing result in the observed switching behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗