Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Persistent photoconductivity and electron mobility in In{sub 0.52}Al{sub 0.48}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As/InP quantum-well structures

The influence of the width of the quantum well L and doping on the band structure, scattering, and electron mobility in nanoheterostructures with an isomorphic In{sub 0.52}Al{sub 0.48}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum well grown on an InP substrate are investigated. The quantum and transport mobilities of electrons in the dimensionally quantized subbands are determined using Shubnikov-de Haas effect measurements. These mobilities are also calculated for the case of ionized-impurity scattering taking into account intersub-band electron transitions. It is shown that ionized-impurity scattering is the dominant mechanism of electron scattering. At temperatures T < 170 K, persistent photoconductivity is observed, which is explained by the spatial separation of photoexcited charge carriers.

36 MATERIALS SCIENCE↗

Rashba spin splitting and cyclotron resonance in strained InGaAs/InP heterostructures with a two-dimensional electron gas

Cyclotron resonance and magnetic transport in InP/InGaAs/InP heterostructures with axially symmetric quantum wells are studied experimentally at 4.2 K. An increase in the cyclotron mass at the Fermi level from 0.047m{sub 0} to 0.057m{sub 0} with an increase in the concentration of two-dimensional electrons from 5.5 Multiplication-Sign 10{sup 11} to 2.1 Multiplication-Sign 10{sup 12} cm{sup -3} is shown. The values of the Rashba spin splitting at the Fermi level are determined from Fourier analysis of the beats of Shubnikov-de Haas oscillations. The obtained experimental data are compared with the theoretical results of self-consistent calculations of the energy spectrum and cyclotron masses of 2D electrons performed using the eight-band k {center_dot} p Hamiltonian.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy of III-P{sub x}As{sub 1−x} solid solutions: Mechanism of composition formation in the sublattice of a group V element

The effect of substrate temperature, As{sub 2} and P{sub 2} molecular flux densities, and growth rate on the composition of III-P{sub x}As{sub 1−x} solid solution layers prepared by molecular beam epitaxy is experimentally investigated. Experimental data in a wide range of growth conditions are analyzed. The results obtained are presented in the form of a kinetic model for describing the process of formation of the composition in the Group V sublattice of the III-P{sub x}As{sub 1−x} solid solution upon molecular beam epitaxy. The model can be used for choosing the growth conditions of the III-P{sub x}As{sub 1−x} (001) solid-solution layers of a specified composition.

36 MATERIALS SCIENCE↗

Specific features of the photoluminescence of HEMT nanoheterostructures containing a composite InAlAs/InGaAs/InAs/InGaAs/InAlAs quantum well

The specific features of the photoluminescence and the electrical properties of doped nanoheterostructures containing a composite InAlAs/InGaAs/InAlAs quantum well with a thin InAs insert in the middle are studied. The insert thickness is varied in the range from 1.7 to 3.0 nm. It is established that the position of the peaks in the photoluminescence spectra in the photon energy range 0.6–0.8 eV correlates with the InAs insert thickness. Simulation of the band structure shows that the experimentally observed variation in the energy of optical transitions is associated with lowering of the energy of electron and hole states in the quantum well with increasing insert thickness. In the photon energy range 1.24–1.38 eV, optical transitions in the region of the InAlAs buffer-InP substrate interface are observed. The signal photon energy and intensity depend on the features of the formation of this heterointerface and on the conditions of substrate annealing. It is conceived that this is due to the formation of a transition region between the InAlAs buffer and the substrate.

36 MATERIALS SCIENCE↗

Exchange enhancement of the electron g factor in strained InGaAs/InP heterostructures

The exchange enhancement of the electron g factor in strained InGaAs/InP heterostructures with a two-dimensional electron gas is studied. Analysis of the temperature dependence of the resistance in the minima of the Shubnikov-de Haas oscillations in perpendicular magnetic fields up to 12 T in the vicinity of the odd filling factors of the Landau levels yields the values of the effective electron Lande factor g* from −8.6 to −10.1. The experimental values are compared with the results of theoretical calculations of the g factor of quasiparticles. The calculations are performed using an eight-band k · p Hamiltonian and take into account exchange interaction in the two-dimensional electron gas. It is shown that, under the conditions of a large overlap between the spin-split Landau levels, the maximum value of the quasiparticle g factor can be attained in the vicinity of even filling factors. This is caused by the nonparabolicity of the electron dispersion relation.

36 MATERIALS SCIENCE↗

Experimental determination of the electron effective masses and mobilities in each dimensionally-quantized subband in an In{sub x}Ga{sub 1−x}As quantum well with InAs inserts

HEMT structures with In{sub 0.53}Ga{sub 0.47}As quantum well are synthesized using molecular-beam epitaxy on InP substrates. The structures are double-side Si δ-doped so that two dimensionally-quantized subbands are occupied. The effect of the central InAs nanoinsert in the quantum well on the electron effective masses m* and mobilities in each subband is studied. For experimental determination of m*, the quantum μ{sub q} and transport μ{sub t} mobilities of the two-dimensional electron gas in each dimensionally-quantized subband, the Shubnikov-de Haas effect is measured at two temperatures of 4.2 and 8.4 K. The electron effective masses are determined by the temperature dependence of the oscillation amplitudes, separating the oscillations of each dimensionally-quantized subband. The Fourier spectra of oscillations are used to determine the electron mobilities μ{sub q} and μ{sub t} in each dimensionally-quantized subband. It is shown that m* decreases as the InAs-nanoinsert thickness d in the In{sub 0.53}Ga{sub 0.47}As quantum well and electron mobilities increase. The maximum electron mobility is observed at the insert thickness d = 3.4 nm.

36 MATERIALS SCIENCE↗

Comparative investigation of GaAsSb/InGaAs type-II and InP/InGaAs type-I doped-channel field-effect transistors

DC performance of GaAsSb/InGaAs type-II and InP/InGaAs type-I doped-channel field-effect transistors (DCFETs) is demonstrated and compared by two-dimensional simulated analysis. As compared with the traditional InP/InGaAs DCFET, the GaAsSb/InGaAs DCFET exhibits a higher drain current of 8.05 mA, a higher transconductance of 216.24 mS/mm, and a lower gate turn-on voltage of 0.25 V for the presence of a relatively large conduction band discontinuity (ΔE{sub c} ≈ 0.4 eV) at GaAsSb/InGaAs heterostructure and the formation of two-dimensional electron gas in the n{sup +}-InGaAs doping channel. However, due to the tunneling effect under large gate-to-source bias, it results in considerably large gate leakage current in the GaAsSb/InGaAs DCFET.

36 MATERIALS SCIENCE↗

Admittance spectroscopy of solar cells based on GaPNAs layers

Admittance spectroscopy is used to study defect levels in the layers of a GaPNAs quaternary solid solution. Centers with an activation energy of 0.22 eV and a capture cross section of ∼2.4 × 10{sup −15} cm{sup 2} are found in doped n-GaPNAs layers grown on GaP substrates. These centers correspond to already known Si{sub Ga} + V{sub P} defects in n-GaP; annealing decreases their concentration by several times. A level with an activation energy of 0.23–0.24 eV and capture cross section of ∼9.0 × 10{sup −20} cm{sup 2} is found in undoped GaPNAs layers grown on Si and GaP substrates. The concentration of these centers substantially decreases upon annealing, and, at annealing temperatures exceeding 600°C, there is absolutely no response from these defects. For undoped GaPNAs layers grown on GaP substrates, a level with an activation energy of 0.18 eV and capture cross section of ∼1.1 × 10{sup −16} cm{sup 2} is also found. The concentration of these centers remains unchanged upon annealing.

36 MATERIALS SCIENCE↗

Photoluminescence of heterostructures with GaP{sub 1−x}N{sub x} and GaP{sub 1−x−y}N{sub x}As{sub y} layers grown on GaP and Si substrates by molecular-beam epitaxy

The structural and optical properties of heterostructures containing GaP{sub 1−x}N{sub x} ternary and GaP{sub 1−x−y}N{sub x}As{sub y} quaternary alloy layers are discussed. The heterostructures are grown by molecular-beam epitaxy on GaP and Si substrates. The structures are studied by the high-resolution X-ray diffraction technique and photoluminescence measurements in a wide temperature range from 10 to 300 K. In the low-temperature photoluminescence spectra of the alloys with a low nitrogen fraction (x < 0.007), two clearly resolved narrow lines attributed to the localized states of nitrogen pairs and the phonon replicas of these lines are observed.

36 MATERIALS SCIENCE↗

MBE growth of GaP on a Si substrate

It is shown that single-crystal GaP buffer layers can be formed on a Si substrate by molecular-beam epitaxy, with the “migration-enhanced epitaxy” procedure applied in the stage in which the nucleating layer is formed. When a GaP layer is produced on a p-type silicon substrate, a p-n junction is created in a natural way between the p-Si substrate and the surface n-Si layer produced by the diffusion of phosphorus into the substrate during the course of the epitaxial growth of GaP. This p-n junction can be used as the first junction of a silicon-based multijunction photovoltaic converter.

36 MATERIALS SCIENCE↗

Estimation of the potential efficiency of a multijunction solar cell at a limit balance of photogenerated currents

A method is proposed for estimating the potential efficiency which can be achieved in an initially unbalanced multijunction solar cell by the mutual convergence of photogenerated currents: to extract this current from a relatively narrow band-gap cell and to add it to a relatively wide-gap cell. It is already known that the properties facilitating relative convergence are inherent to such objects as bound excitons, quantum dots, donor-acceptor pairs, and others located in relatively wide-gap cells. In fact, the proposed method is reduced to the problem of obtaining such a required light current-voltage (I–V) characteristic which corresponds to the equality of all photogenerated short-circuit currents. Two methods for obtaining the required light I–V characteristic are used. The first one is selection of the spectral composition of the radiation incident on the multijunction solar cell from an illuminator. The second method is a double shift of the dark I–V characteristic: a current shift J{sub g} (common set photogenerated current) and a voltage shift (−J{sub g}R{sub s}), where R{sub s} is the series resistance. For the light and dark I–V characteristics, a general analytical expression is derived, which considers the effect of so-called luminescence coupling in multijunction solar cells. The experimental I–V characteristics are compared with the calculated ones for a three-junction InGaP/GaAs/Ge solar cell with R{sub s} = 0.019 Ω cm{sup 2} and a maximum factual efficiency of 36.9%. Its maximum potential efficiency is estimated as 41.2%.

36 MATERIALS SCIENCE↗

Formation of III–V ternary solid solutions on GaAs and GaSb plates via solid-phase substitution reactions

Processes are considered in which ultrathin layers of III–V ternary solid solutions are formed via the delivery of Group-V element vapors to GaAs and GaSb semiconductor plates, with solid-phase substitution reactions occurring in the surface layers of these plates. This method can form defect-free GaAs{sup 1–x}P{sup x}, GaAs{sup x}Sb{sup 1–x}, and GaP{sup x}Sb{sup 1–x} layers with thicknesses of 10–20 nm and a content x of the embedded components of up to 0.04.

36 MATERIALS SCIENCE↗

Site-Controlled Growth of Single InP QDs

The MOVPE growth of InP/GaInP quantum dots (QDs) on GaAs substrate “defects” formed by a focused beam of Ga{sup +} ions is studied. It is shown that ordered arrays of QDs with a density of 0.25 (μm){sup −2} can be obtained in the InP/GaInP system. It is demonstrated that effective luminescence can be obtained by using two QD sheets separated by a GaAs/GaInP buffer layer.

36 MATERIALS SCIENCE↗

Selective UV radiation detection on the basis of low-dimensional ZnCdS/ZnMgS/GaP and ZnCdS/ZnS/GaP heterostructures

The detecting properties of periodic heterostructures with ZnCdS quantum wells separated by ZnMgS or ZnS barrier layers are studied. Heterostructures are grown on semi-insulating GaP substrates by metal organic vapor-phase epitaxy (MOVPE). On their basis, metal–semiconductor–metal (MSM) diodes with interdigital Schottky contacts 3 μm, distances between them of 3 μm, and a total detector area of 100 × 100 μm are fabricated. The detectors have low dark currents (10{sup –12} A); at low bias voltages, they provide a narrow- band response (full-width at half-maximum of FWHM = 18 nm at a wavelength of 350 nm) which is controlled by the ZnCdS quantum-well composition. As bias is increased to 70 V, the maximum detector sensitivity shifts by a wavelength of 450 nm, which is caused by penetration of the external-bias electric field into the semi-insulating GaP substrate. In this case, the narrow-band response of the detector at a wavelength of 350 nm is retained, i.e., the two-color detection of light is provided.

36 MATERIALS SCIENCE↗

On the theory of the two-photon linear photovoltaic effect in n-GaP

A quantitative theory of the diagonal (ballistic) and nondiagonal (shift) band index contributions to the two-photon current of the linear photovoltaic effect in a semiconductor with a complex band due to the asymmetry of events of electron scattering at phonons and photons is developed. It is shown that processes caused by the simultaneous absorption of two photons do not contribute to the ballistic photocurrent in n-GaP. This is due to the fact that, in this case, there is no asymmetric distribution of the momentum of electrons excited with photons; this distribution arises upon the sequential absorption of two photons with the involvement of LO phonons. It is demonstrated that the temperature dependence of the shift contribution to the two-photon photocurrent in n-GaP is determined by the temperature dependence of the light-absorption coefficient caused by direct optical transitions of electrons between subbands X{sub 1} and X{sub 3}. It is shown that the spectral dependence of the photocurrent has a feature in the light frequency range ω → Δ/2ℏ, which is related to the hump-like shape of subband X{sub 1} in n-GaP{sup 1} and the root-type singularity of the state density determined as k{sub ω}{sup -1}= (2ℏω–Δ){sup –1/2}, where Δ is the energy gap between subbands X{sub 1} and X{sub 3}. The spectral and temperature dependences of the coefficient of absorption of linearly polarized light in n-GaP are obtained with regard to the cone-shaped lower subband of the conduction band.

36 MATERIALS SCIENCE↗

Photodiode 1 × 64 linear array based on a double p-InAsSbP/n-InAs{sub 0.92}Sb{sub 0.08}/n{sup +}-InAs heterostructure

The results of studies of the current–voltage characteristics and of the photoelectric and luminescence properties of a monolithic diode 1 × 64 linear array based on p-InAsSbP/n-InAsSb/n{sup +}-InAs with the n{sup +}-InAs-substrate side illuminated and sensitive in the region of 4-μm are reported. An analysis is performed of the mechanisms of current flow in the temperature range of 77–353 K and also of the photosensitivity and the speed of response taking into account the spatial distribution of nonequilibrium radiation and the data of capacitance–voltage measurements.

36 MATERIALS SCIENCE↗

Photovoltage and photocurrent in Pd–oxide–InP structures in a hydrogen medium

Pd–oxide–InP (MOS) structures are fabricated, and their physical and photoelectric properties in a hydrogen atmosphere are investigated. It is established that a decrease in photovoltage of the structure and a large increase in photocurrent in the circuit are observed under the pulsed effect of hydrogen on the structure with a palladium layer illuminated by a light-emitting diode (LED of the wavelength λ = 0.9 μm). The kinetics and mechanism of the variation in the photovoltage and photocurrent are considered. It is assumed that the photovoltage decreases because of the ionization of hydrogen atoms in the Pd layer, and the photocurrent increases due to the thermionic emission of nonequilibrium electrons from the Pd layer into the semiconductor. On the basis of results of the investigations, the sensitive element for an optoelectronic hydrogen sensor is developed.

36 MATERIALS SCIENCE↗

Effect of multicomponent InAsSbP matrix surface on formation of InSb quantum dots at MOVPE growth

Indium-antimonide quantum dots (7–9 × 10{sup 9} cm{sup 2}) are produced on an InAs(001) substrate by metal-organic vapor-phase epitaxy at a temperature of T = 440°C. Epitaxial deposition occurred simultaneously onto an InAs binary matrix and an InAsSbP quaternary alloy matrix layer lattice-matched to the InAs substrate in terms of the lattice parameter. Transformation of the quantum-dot shape and size is studied in relation to the chemical composition of the working matrix surface, onto which the quantum dots are deposited. The use of a multicomponent layer makes it possible to control the lattice parameter of the matrix and the strains produced in the system during the formation of self-assembled quantum dots.

36 MATERIALS SCIENCE↗