Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE VELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Inviscid evolution of large amplitude filaments in a uniform gravity field

The inviscid evolution of localized density stratifications under the influence of a uniform gravity field in a homogeneous, ambient background is studied. The fluid is assumed to be incompressible, and the stratification, or filament, is assumed to be initially isotropic and at rest. It is shown that the center of mass energy can be related to the center of mass position in a form analogous to that of a solid object in a gravity field g by introducing an effective gravity field g{sub eff}, which is less than g due to energy that goes into the background and into non-center of mass motion of the filament. During the early stages of the evolution, g{sub eff} is constant in time and can be determined from the solution of a 1D differential equation that depends on the initial, radially varying density profile of the filament. For small amplitude filaments such that ρ{sub 0} ≪ 1, where ρ{sub 0} is the relative amplitude of the filament to the background, the early stage g{sub eff} scales linearly with ρ{sub 0}, but as ρ{sub 0}→∞, g{sub eff}→g and is thus independent of ρ{sub 0}. Fully nonlinear simulations are performed for the evolution of Gaussian filaments, and it is found that the time t{sub max}, which is defined as the time for the center of mass velocity to reach its maximum value U{sub max}, occurs very soon after the constant acceleration phase and so U{sub max}≈g{sub eff}(t=0)t{sub max}. The simulation results show that U{sub max}∼1/t{sub max}∼√(ρ{sub 0}) for ρ{sub 0} ≪ 1, in agreement with theory and results from previous authors, but that U{sub max} and t{sub max} both scale approximately with √(ρ{sub 0}) for ρ{sub 0} ≫ 1. The fact that U{sub max} and t{sub max} have the same scaling with ρ{sub 0} for large amplitude filaments is in agreement with the theory presented in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Optimal driving of Bose-Einstein condensates in optical cavities

We apply quantum optimal control to enhance the performance of the experimental setup of Ref. [1], speeding up the system dynamics at time scales of the order of the quantum speed limit. We perform a fast crossing of the quantum phase transition the system undergoes under realistic experimental conditions, and we present a new scaling-based strategy to compute optimal pulses for systems at the thermodynamical limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Cold melting of beryllium: Atomistic view on Z-machine experiments

Analysis of phase diagram of beryllium at high pressures and temperatures obtained as a result of ab initio calculations and large scale classical molecular dynamics simulations of beryllium shock loading have shown that the so called cold melting takes place when shock wave propagates through polycrystalline samples. Comparison of ab initio calculation results on sound speed along the Hugoniot with experimental data obtained on Z-machine also evidences for possible manifestation of the cold melting. The last may explain the discrepancy between atomistic simulations and experimental data on the onset of the melting on the Hugoniot.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Experimental investigations of electron heating dynamics and ion energy distributions in capacitive discharges driven by customized voltage waveforms

Capacitively coupled radio frequency plasmas driven by customized voltage waveforms provide enhanced opportunities to control process-relevant energy distributions of different particle species. Here, we present an experimental investigation of the spatio-temporal electron heating dynamics probed by Phase-Resolved Optical Emission Spectroscopy (PROES) in an argon discharge driven by up to three consecutive harmonics of 13.56 MHz with individually adjustable harmonics' amplitudes and phases. PROES and voltage measurements are performed at fixed total voltage amplitudes as a function of the number of driving harmonics, their relative phases, and pressure to study the effects of changing the applied voltage waveform on the heating dynamics in collisionless and collisional regimes. Additionally, the ion energy distribution function (IEDF) is measured at low pressure. In this collisionless regime, the discharge is operated in the α-mode. The velocity of energetic electron beams generated by the expanding sheaths is found to be affected by the number of driving harmonics and their relative phases. This is understood based on the sheath dynamics obtained from a model that determines sheath voltage waveforms. The formation of the measured IEDFs is understood and found to be directly affected by the observed changes in the electron heating dynamics. It is demonstrated that the mean ion energy can be controlled by adjusting the harmonics' phases. In the collisional regime at higher pressures changing the number of harmonics and their phases at fixed voltage is found to induce heating mode transitions from the α- to the γ-mode. Finally, a method to use PROES as a non-invasive diagnostic to monitor and detect changes of the ion flux to the electrodes is developed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Plasma turbulence in the equatorial electrojet: A two-dimensional Hamiltonian fluid model

A nonlinear unified fluid model that describes the Equatorial Electrojet, including the Farley-Buneman and gradient-drift plasma instabilities, is defined and shown to be a noncanonical Hamiltonian system. Two geometric constants of motion for the model are obtained and shown to be Casimir invariants. Here, a reformulation of the model shows the roles of the density-gradient scale-length ( L n ) and the cross-field drift-velocity ($υ_E$) in controlling the dynamics of unstable modes in the growing, transition, and saturation phases of a simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Resolving electrochemically triggered topological defect dynamics and structural degradation in layered oxides

Understanding topological defects-controlled structural degradation of layered oxides—a key cathode material for high-performance lithium-ion batteries—plays a critical role in developing next-generation cathode materials. Here, by constructing a nanobattery in an electron microscope enabling atomic-scale monitoring of electrochemcial reactions, we captured the electrochemically driven atomistic dynamics and evolution of dislocations—a most important topological defect in material. We deciphered how dislocations nucleate, move, and annihilate within layered cathodes at the atomic scale. Specifically, we found two types of dislocation configurations, i.e., single dislocations and dislocation dipoles. Both pure dislocation glide/climb and mixed motions were captured, and the dislocation glide and climb velocities were first experimentally measured. Moreover, dislocation activity-mediated structural degradation such as crack nucleation, phase transformation, and lattice reorientation was unraveled. Our work provides deep insights into the atomistic dynamics of electrochemically driven dislocation activities in layered oxides.

Wang, Chunyang (ORCID:0000000184613952)↗
DOE OSTI2012

TRANSVERSE OSCILLATIONS IN CHROMOSPHERIC MOTTLES

A number of recent investigations have revealed that transverse waves are ubiquitous in the solar chromosphere. The vast majority of these have been reported in limb spicules and active region fibrils. We investigate long-lived, quiet-Sun, on-disk features such as chromospheric mottles (jet-like features located at the boundaries of supergranular cells) and their transverse motions. The observations were obtained with the Rapid Oscillations in the Solar Atmosphere instrument at the Dunn Solar Telescope. The data set is comprised of simultaneous imaging in the H{alpha} core, Ca II K, and G band of an on-disk quiet-Sun region. Time-distance techniques are used to study the characteristics of the transverse oscillations. We detect over 40 transverse oscillations in both bright and dark mottles, with periods ranging from 70 to 280 s, with the most frequent occurrence at {approx}165 s. The velocity amplitudes and transverse displacements exhibit characteristics similar to limb spicules. Neighboring mottles oscillating in-phase are also observed. The transverse oscillations of individual mottles are interpreted in terms of magnetohydrodynamic kink waves. Their estimated periods and damping times are consistent with phase mixing and resonant mode conversion.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

The shock-induced star formation sequence resulting from a constant spiral pattern speed

We utilize a suite of multiwavelength data of nine nearby spirals to analyze the shock-induced star formation sequence that may result from a constant spiral pattern speed. The sequence involves tracers as the H I, CO 24 μm, and FUV, where the spiral arms were analyzed with Fourier techniques in order to obtain their azimuthal phases as a function of radius. It was found that only two of the objects, NGC 628 and NGC 5194, present coherent phases resembling the theoretical expectations, as indicated by the phase shifts of CO- 24 μm. The evidence is more clear for NGC 5194 and moderate for NGC 628. It was also found that the phase shifts are different for the two spiral arms. With the exception on NGC 3627, a two-dimensional Fourier analysis showed that the rest of the objects do not exhibit bi-symmetric spiral structures of stellar mass, i.e., grand-design spirals. A phase order inversion indicates a corotation radius of ∼89'' for NGC 628 and ∼202'' for NGC 5194. For these two objects, the CO-Hα phase shifts corroborate the CO-24 μm azimuthal offsets. Also for NGC 5194, the CO-70 μm, CO-140 μm, and CO-250 μm phase shifts indicate a corotation region.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

The nature and orbit of the Ophiuchus stream

The Ophiuchus stream is a recently discovered stellar tidal stream in the Milky Way. We present high-quality spectroscopic data for 14 stream member stars obtained using the Keck and MMT telescopes. We confirm the stream as a fast moving (v{sub los} ∼ 290 km s{sup −1}), kinematically cold group (σ{sub v{sub l{sub o{sub s}}}}≲1 km s{sup −1}) of α-enhanced and metal-poor stars ([α/Fe] ∼ 0.4 dex, [Fe/H] ∼ −2.0 dex). Using a probabilistic technique, we model the stream simultaneously in line-of-sight velocity, color–magnitude, coordinate, and proper motion space, and so determine its distribution in 6D phase-space. We find that the stream extends in distance from 7.5 to 9 kpc from the Sun; it is 50 times longer than wide, merely appearing highly foreshortened in projection. The analysis of the stellar population contained in the stream suggests that it is ∼12 Gyr old, and that its initial stellar mass was ∼2 × 10{sup 4} M{sub ⊙} (or at least ≳7 × 10{sup 3} M{sub ⊙}). Assuming a fiducial Milky Way potential, we fit an orbit to the stream that matches the observed phase-space distribution, except for some tension in the proper motions: the stream has an orbital period of ∼350 Myr, and is on a fairly eccentric orbit (e ∼ 0.66) with a pericenter of ∼3.5 kpc and an apocenter of ∼17 kpc. The phase-space structure and stellar population of the stream show that its progenitor must have been a globular cluster that was disrupted only ∼240 Myr ago. We do not detect any significant overdensity of stars along the stream that would indicate the presence of a progenitor, and conclude that the stream is all that is left of the progenitor.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Orbital-and spin-driven lattice instabilities in quasi-one-dimensional CaV 2 O 4

Here, calcium vanadate CaV 2 O 4 has a crystal structure of quasi-one-dimensional zigzag chains composed of orbital-active V 3+ ions and undergoes successive structural and antiferromagnetic phase transitions at T s ~140 K and T N ~70 K, respectively. We perform ultrasound velocity measurements on a single crystal of CaV 2 O 4 . The temperature dependence of its shear elastic moduli exhibits huge Curie-type softening upon cooling that emerges above and below T s depending on the elastic mode. The softening above T s suggests the presence of either onsite Jahn-Teller-type or intersite ferrotype orbital fluctuations in the two inequivalent V 3+ zigzag chains. The softening below T s suggests the occurrence of a dimensional spin-state crossover, from quasi-one to three, that is driven by the spin-lattice coupling along the inter-zigzag-chain orthogonal direction. The successive emergence of the orbital- and spin-driven lattice instabilities above and below T s , respectively, is unique to the orbital-spin zigzag chain system of CaV 2 O 4 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A prediction of the thermodynamic, thermophysical, and mechanical properties of CrTaO 4 from first principles

It is reported that the self-forming CrTaO 4 oxide scale can protect refractory high-entropy alloys from oxidation, superior to Cr 2 O 3 . In this paper, the phase stability, mechanical, and thermal properties of three polymorphous phases of CrTaO 4 are systematically investigated from first-principles density functional theory calculations. The mechanical properties predicted using the strain–energy methods indicated that all three phases are mechanically stable. The temperature dependence of elastic constants and polycrystalline moduli of three phases demonstrated the thermal softening as temperature increase. The Helmholtz-free energies as a function of volume and temperature are derived from phonon dispersions within the quasi-harmonic approximation at six strained volumes. The calculated apparent bulk coefficients of thermal expansion of these three phases are evaluated, the highest value approximately 13.4× 10 –6 K –1 within a temperature range of 500–2000 K for the rutile I4 1 md phase. The lattice thermal conductivity calculated by the Debye–Callaway model suggested that the rutile type I4 1 md phase has the lowest value of approximately 2.1 W/m/K at 1800 K. The other two phases, C2/m and P2/c, exhibit higher values due to relatively lower Grüneisen parameters and larger phonon velocities. The melting point of CrTaO 4 is predicted to be between 1975 and 2449 K using ab initio molecular dynamics simulations. Finally, this work provides a comprehensive theoretical understanding of the thermodynamic, mechanical, and thermal properties for the new material CrTaO 4 and serves as an example of a viable computational design strategy for improved oxidation resistance of refractory alloys at high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Monte Carlo-based simulation of dynamic jaws tomotherapy

Purpose: Original TomoTherapy systems may involve a trade-off between conformity and treatment speed, the user being limited to three slice widths (1.0, 2.5, and 5.0 cm). This could be overcome by allowing the jaws to define arbitrary fields, including very small slice widths (<1 cm), which are challenging for a beam model. The aim of this work was to incorporate the dynamic jaws feature into a Monte Carlo (MC) model called TomoPen, based on the MC code PENELOPE, previously validated for the original TomoTherapy system. Methods: To keep the general structure of TomoPen and its efficiency, the simulation strategy introduces several techniques: (1) weight modifiers to account for any jaw settings using only the 5 cm phase-space file; (2) a simplified MC based model called FastStatic to compute the modifiers faster than pure MC; (3) actual simulation of dynamic jaws. Weight modifiers computed with both FastStatic and pure MC were compared. Dynamic jaws simulations were compared with the convolution/superposition (C/S) of TomoTherapy in the ''cheese'' phantom for a plan with two targets longitudinally separated by a gap of 3 cm. Optimization was performed in two modes: asymmetric jaws-constant couch speed (''running start stop,'' RSS) and symmetric jaws-variable couch speed (''symmetric running start stop,'' SRSS). Measurements with EDR2 films were also performed for RSS for the formal validation of TomoPen with dynamic jaws. Results: Weight modifiers computed with FastStatic were equivalent to pure MC within statistical uncertainties (0.5% for three standard deviations). Excellent agreement was achieved between TomoPen and C/S for both asymmetric jaw opening/constant couch speed and symmetric jaw opening/variable couch speed, with deviations well within 2%/2 mm. For RSS procedure, agreement between C/S and measurements was within 2%/2 mm for 95% of the points and 3%/3 mm for 98% of the points, where dose is greater than 30% of the prescription dose (gamma analysis). Dose profiles acquired in transverse and longitudinal directions through the center of the phantom were also compared with excellent agreement (2%/2 mm) between all modalities. Conclusions: The combination of weights modifiers and interpolation allowed implementing efficiently dynamic jaws and dynamic couch features into TomoPen at a minimal cost in terms of efficiency (simulation around 8 h on a single CPU).

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

Pattern formation and transport for externally driven active matter on periodic substrates (a)

Abstract We investigate the transport of interacting active run-and-tumble particles moving under an external drift force through a periodic array of obstacles for increasing drive amplitudes. For high activity where the system forms a motility-induced phase-separated state, there are several distinct dynamic phases including a low drive pinned cluster phase, an intermediate uniform fluid, and a higher drive stripe crystal state. The transitions between the phases are correlated with signatures in the transport curves, differential mobility, and power spectra of the velocity fluctuations. In contrast, in the low activity regime the transport curves and power spectra undergo little change as a function of drive. We argue that in the high activity limit, the behavior is similar to that of driven solids on periodic substrates, while in the low activity limit the system behaves like a driven fluid.

36 MATERIALS SCIENCE↗
DOE OSTI2024

TEAMER - Extreme Events Modeling for the MARMOK-OWC Wave Energy Converter

Through the TEAMER program, Sandia National Laboratories (SNL) collaborated with IDOM Incorporated to study their MARMOK-Oscillating Water Column (MARMOK-OWC) wave energy conversion device. The study yielded a quantitative understanding of hydrodynamic pressures on the oscillating water column (OWC) device surfaces, the mooring tensions, and the dynamic performance of the device under extreme ocean wave conditions. This project utilized a comprehensive multi-phase Navier-Stokes flow solver with an overset body-fit mesh to predict fluid velocities and hydrodynamic forces on the MARMOK-OWC device. Computational Fluid Dynamics (CFD) analysis were conducted using OpenFOAM. This data includes the OpenFOAM cases (setup and data) to run the extreme events developed during the project. This project is part of the TEAMER RFTS 4 (request for technical support) program.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Constraints on the Parameterization of Convective Cloud Systems from Analyses of ARM Observations and Models

Anthony D. Del Genio has served as principal investigator since the inception of ASR in 2009 as co-chair of the Cloud Lifecycle Working Group (CLWG) and in connection with that as a member of the ASR Science and Infrastructure Steering Committee. In this role he has been intimately involved with oversight of existing and proposed ASR Focus Groups (Vertical Velocity, QUICR, Ice Properties) and thematic interest groups (Mesoscale Organized Convection, Warm Low Clouds, Mixed-Phase Clouds, MJO, Entrainment) whose activities fall under the purview of CLWG. The PI actively participates himself in the Mesoscale Organized Convection and MJO groups, is a Co-Investigator on two successfully implemented IOPs (AMIE, MC3E), and was an unfunded Collaborator on the recently completed FASTER project at BNL under the DOE Modeling Program. The PI has also spent the past three years as a member of the ARM Science Board, which reviews proposals to conduct IOPs at the permanent ARM sites and to deploy the ARM Mobile Facilities. Finally, the PI was a participant in the first ARM-European workshop in 2012 that eventually led to the creation of the SGP supersite concept. This report includes an annotated list of published research results.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Eddy Current Flow Meter Measurements and Modeling Validation

The goal of the eddy current flow meter (ECFM) is to monitor velocities and temperatures of conductive liquid metals. The ECFM can also detect voids in two-phase liquid metal flows. Measurement of these flows can greatly improve the accuracy of the empirical formulas used for fluid dynamics near the reactor core and aid in mapping any non-uniformities in fluid flow such as estimates of temperature and phase. While the eventual goal is to develop the ECFM for the liquid sodium surrounding the Versatile Test Reactor (VTR) core, this report focuses on modeling and experimental validation of ECFM for a moving solid test rod and for liquid mercury in the Target Test Facility (TTF) flow loop to better understand and further develop ECFM measurement capabilities by validating model predictions with benchmark experiments. Eventually the models could be used to design and optimize future ECFMs for specific applications such as monitoring flow within the VTR pool.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Generation and Control of Self-Organized Nonlinear Kinetic Structures in High Energy Density Plasmas in the Presence of Intense Magnetic Fields and Ultrashort Laser Pulses

Goals were to study the interplay between electron plasma waves (EPW), KEEN waves and externally generated magnetic fields. In particular, the Weibel instability B field generation process and its interrelationship with the existence of nonlinear EPWs in high energy density plasmas. We focused on a number of models of how Kinetic, Nonlinear Electron Plasma Waves, KNL-EPW and KEEN waves create anisotropic electron velocity distribution functions, e- VDF, and how these anisotropic e- VDFs in turn drive the Weibel instability and generate B fields. Our goal is to control the SRS and SKEENS processes that generate the KNL-EPW, control the anisotropy, and thus also control the dynamics of the resulting B fields, their influence on the transport coefficients and heat transport that results, their modification of SRS itself and the reinforced anisotropy driven loop gain.

(Kinetic electrostatic electron nonlinear) KEEN wa↗
DOE OSTI2026

Extension of Clad Damage Propagation Model for Fission Gas Dispersal and Two-Phase Flow Effects in MOOSE SubChannel Module

This report presents an extension of the Clad Damage Propagation (CDAP) model implemented in the MOOSE SubChannel Module (SCM) to capture post-failure fission-gas dispersal and two-phase flow effects in sodium-cooled fast reactor assemblies. The extended model tracks discharged gas axially and radially, computes channel-averaged flow quality and void fraction using a Lockhart–Martinelli framework, evaluates two-phase frictional pressure-drop multipliers, determines inlet mass-flow degradation under fixed core pressures, and applies an intensified-void-based heat-transfer degradation to affected fuel pins. Radial plume expansion is parameterized using mineral-oil jet experiments mapped to sodium conditions via Reynolds–Weber similarity. Implementation details are documented, along with the new methods and user inputs needed to control plume mapping and two-phase behavior. Demonstration simulations for 19- and 37-pin bundles show that breach size and inlet velocity strongly influence propagation potential: small breaches (≤0.5 mm) produce limited degradation while larger breaches (~1 mm) can drive oscillatory temperature spikes and enhanced failure propagation, especially at higher velocities. These results demonstrate that the extended CDAP model provides a more complete framework for quantifying cladding damage propagation and evaluating propagation potential in transient scenarios. The approach remains computationally efficient, consistent with subchannel-level analysis, yet incorporates sufficient physics to bridge localized post-failure effects with bundle- and assembly-scale degradation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗