Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optimization and modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Performance Optimization of the IOTA Duoplasmatron Proton Source

We present results from online optimization studies of a duoplasmatron ion source designed to produce 50~keV protons for acceleration to 2.5~MeV and subsequent injection into the Integrable Optics Test Accelerator (IOTA) at Fermilab. Using a Bayesian exploration technique, we developed multi-parameter models of the source s proton current and employed these models to optimize its performance. Depending on the spectrometer configuration used to isolate the proton beam and the chosen optimization objective, we identified three candidate operating points, achieving normalized 50~\% emittances between 0.57 and 1.3~\textmu m and a maximum proton current of $14.5 \pm 0.6$~mA.

Banerjee, Nilanjan [Fermilab] (ORCID:0000000344660↗
NASA NTRS1972

Near-earth orbital guidance and remote sensing

The curriculum of a short course in remote sensing and parameter optimization is presented. The subjects discussed are: (1) basics of remote sensing and the user community, (2) multivariant spectral analysis, (3) advanced mathematics and physics of remote sensing, (4) the atmospheric environment, (5) imaging sensing, and (6)nonimaging sensing. Mathematical models of optimization techniques are developed.

Powers, W. F.↗
NASA NTRS1985

Optimal cooperative control synthesis of active displays

The utility of augmenting displays to aid the human operator in controlling high order complex systems is well known. Analytical evaluations of various display designs for a simple k/s-squared plant in a compensatory tracking task using an Optimal Control Model (OCM) of human behavior is carried out. This analysis reveals that significant improvement in performance should be obtained by skillful integration of key information into the display dynamics. The cooperative control synthesis technique previously developed to design pilot-optimal control augmentation is extended to incorporate the simultaneous design of performance enhancing augmented displays. The application of the cooperative control synthesis technique to the design of augmented displays is discussed for the simple k/s-squared plant. This technique is intended to provide a systematic approach to design optimally augmented displays tailored for specific tasks.

Garg, S.↗
NASA NTRS1986

Optimal cooperative control synthesis of active displays

The utility of augmenting displays to aid the human operator in controlling high order complex systems is well known. Analytical evaluation of various display designs for a simple k/s sup 2 plant in a compensatory tracking task using an optimal Control Model (OCM) of human behavior is carried out. This analysis reveals that significant improvement in performance should be obtained by skillful integration of key information into the display dynamics. The cooperative control synthesis technique previously developed to design pilot-optimal control augmentation is extended to incorporate the simultaneous design of performance enhancing augmented displays. The application of the cooperative control synthesis technique to the design of augmented displays is discussed for the simple k/s sup 2 plant. This technique is intended to provide a systematic approach to design optimally augmented displays tailored for specific tasks.

Garg, S.↗
NASA NTRS1986

MR Cygni revisited

New analysis tools and additional unanalyzed observations justify a reanalysis of MR Cygni. The reanalysis applied successively more restrictive physical models, each with an optimization program. The final model assigned separate first and second order limb darkening coefficients, from model atmospheres, to individual grid points. Proper operation of the optimization procedure was tested on simulated observational data, produced by light synthesis with assigned system parameters, and modulated by simulated observational error. The iterative solution converged to a weakly-determined mass ratio of 0.75. Assuming the B3 primary component is on the main sequence, the HR diagram location of the secondary from the light ratio (ordinate) and adjusted T sub eff (abscissa) was calculated. The derived mass ratio, together with a main-sequence mass for the B3 component, implies a main-sequence secondary spectral type of B4. The photometrically-determined secondary radii agree with this spectral type, in marginal disagreement with the B7 type from the HR diagram analysis. The individual masses, derived from the radial velocity curve of the primary component, the photometrically-determined i, and alternative values of derived mass ratio are seriously discrepant with main sequence objects. The imputed physical status of the system is in disagreement with representations that have appeared in the literature.

Linnell, Albert P.↗
NASA NTRS2018

Modeling Clouds in Brown Dwarf and Exoplanet Giant Planet Atmospheres

Clouds and hazes are commonplace in the atmospheres of solar system planets and are likely ubiquitous in the atmospheres of extrasolar planets as well. Clouds affect every aspect of a planetary atmosphere, from the transport of radiation, to atmospheric chemistry, to dynamics and they influence - if not control - aspects such as surface temperature and habitability. In my presentations I aim to provide an introduction to the role and properties of clouds in exoplanetary atmospheres and will discuss the lessons learned from the past two decades of studying clouds in brown dwarf atmospheres. I will consider the role clouds play in influencing the spectra of extrasolar giant planets and will discuss the relative simple approaches that have been taken so far to model exoplanet clouds. I will also review how the scattering and extinction efficiencies of cloud particles may be approximated in certain limiting cases of small and large particles in order to facilitate physical understanding and will discuss the need for optimized cloud models that can be applied to exoplanet transmission spectra. Finally I will discuss the various sources of aerosol opacity, including photochemistry, disequilibrium chemistry, and equilibrium condensation.

Marley, Mark S.↗
NASA NTRSDate not supplied

Real World Applications of AI/ML in Optimizing Airspace Operations

As National Airspace System (NAS) is going through the Digital Transformation journey, data science and analytics methods can significantly contribute to improving the traditional physics-based decision-making tools. The adoption of AI/ML methods will not only help accelerate Federal Aviation Administration (FAA)’s vision of Info-centric NAS but also contribute to the overall objective of sustainable aviation. AI/ML can improve the ground and airspace operations by enhancing the accuracy of current decision-making tools used by the airlines and the FAA to manage traffic on the ground and in the air. Huge amount of data that gets collected during a flight. AI/ML methods can extract information from this data and provide valuable insights to make better operational decisions. NASA has partnered with the FAA and commercial airlines such as American and Southwest Airlines on this effort and has successfully demonstrated the benefits of using ML in real world environment by reducing delays and optimizing ground operations at the US airports. In 2022 itself, NASA demonstrated real-world benefits (over 24K lbs. of fuel savings, over 76.6K lbs. CO2 emission savings, and several hours of delay savings) by deploying ML based prediction models to optimize ground operations at Dallas/Fort Worth International and Dallas Love Field Airports in Texas. These tools are being deployed on the cloud for broader deployment, adaptability, and scalability. NASA is developed a reference implementation of the cloud-based platform to significantly lower the bar to development and distribution of these digital services for aviation. In this talk, I will share information about the Digital Information Platform project, the novel AI/ML based approaches used for optimizing ground operations and the opportunities to partner with NASA on these demonstrations.

air traffic management↗
DOE OSTI2020

Three-dimensional seismic characterization and imaging of the Soda Lake geothermal field

Accurate characterization of subsurface geophysical properties and detection of the fault system are essential for geothermal energy exploration and production. The Soda Lake geothermal field is in western Nevada with a complex fault system. Previous seismic characterization only produced a low-resolution, smooth velocity model along with a simple, conceptual fault model. Using optimized correlation-based full-waveform inversion, wavefield-separation-based reverse-time migration, and automatic fault detection techniques, we present 3D seismic characterization for the Soda Lake geothermal field using 3D surface seismic data acquired with Vibroseis sources. Here, we obtain 3D high-resolution velocity, density, and acoustic impedance models, 3D seismic images with different grid spacings, and a high-resolution fault system. Consistency check between the constructed faults and currently active injection and production geothermal wells verifies that our seismic inversion and imaging results and detected faults are reliable. These results can provide valuable information for optimizing well placement and geothermal energy production at the Soda Lake geothermal field.

15 GEOTHERMAL ENERGY↗
NASA NTRS1974

Digital explicit model following with unstable model dynamics

In the optimal regulator formulation of discrete explicit model following the Riccati equation may fail to reach a steady-state value for model dynamics which are not asymptotically stable. Such conditions often arise in aircraft applications when flying quality criteria based on step inputs are used to define the model equations. Mathematical conditions are presented which insure a steady-state value of the model-following gain matrix regardless of the behavior of the underlying Riccati equation. These results are applied to the design of a model-following controller for the lateral motion of a typical fighter aircraft using unstable model equations.

Armstrong, E. S.↗
NASA NTRS1978

Some modern control techniques for human operator modeling and identification

Some recent results in quantitative modeling of the human operator are reviewed as well as a method for processing his input-output data. Modern control techniques are applied to the pilot operating in a dynamic compensatory tracking task. Trained pilots are known to behave in an optimal manner under fully stressed conditions. This has led to the development of an optimal control model of the human operator which takes his limitations into account. A rationale for determining the appropriate cost functions is determined. Experimental results indicate that the model can closely predict pilot performance in one- or two-axis tracking tasks. The model predicts pilot remnant (noise), error scores, and frequency response in both single-axis and multi-axis tracking tasks.

Shirley, R. S.↗
NASA NTRS1999

Energetic Neutral Atom Imaging at Low Altitudes from the Swedish Microsatellite Astrid: Extraction of the Equatorial Ion Distribution

Energetic neutral atom (ENA) images obtained by the ENA imager on- board the Astrid satellite in the polar cap at 1000 km during a moderate magnetic storm (Dst greater than or equal to 80 nT) on 8 February 1995 are simulated using a parameterized model of the equatorial ion distribution and a six-component Chamberlain exo-sphere with parameters from the MSISE-90 model. By changing the ion parameters until a matching ENA image is obtained one can extract the equatorial ion distribution. Four consecutive images from different view points several of minutes apart are simulated assuming H(+) and O(+), respectively, as parent ions. The optimal set of parameters is extracted by minimizing the chi(exp 2) difference between simulated and observed ENA image using Powell's minimization algorithm. The optimal equatorial model ion distribution consists of O(+) peaked in around dusk. The lower intensity of fluxes obtained from vantage points closer to the pole is an effect of the loss cone of the parent ion distribution being empty.

Brandt, Pontus C:son↗
NASA NTRS2019

Microphysical Retrievals from Simultaneous Measurements by Airborne and Ground Radars during OLYMPEX

The OLYMPEX field campaign took place over the Olympic Peninsula of Washington during winter 2015-2016. During the intensive observing period, several aircraft flights obtained multi-frequency airborne radar measurements at X-, Ku-, Ka, and W-band from radars aboard the ER-2 and DC-8 aircraft. In addition, ground radars at S- and X-band performed RHI scans under the aircraft ground tracks. These coincident datasets provide a wealth of complementary information about the hydrometeor particle sizes, shapes, and orientations.In order to synthesize these measurements and test the robustness of scattering models, an optimal estimation retrieval based upon a Hitschfeld-Bordan profiling algorithm has been developed. This algorithm retrieves profiles of the particle size distribution parameters Nw and Dm, and, in the ice phase, relative proportions of aggregate, pristine, and rimed particles, using scattering models with different size-density and size-aspect ratio relationships. Under this formulation, only the pristine particles are horizontally aligned and capable of producing non-zero ZDR and KDP.From the nadir-looking airborne multifrequency radars, we find that aggregates may be readily distinguished from rimed and pristine particles owing to their uniqueness in triple-frequency space. However, rimed and pristine particles occupy a similar region in this space and thus polarimetric measurements greatly enhance their identification in our retrieval framework. With these capabilities we will present analyses of three-dimensional hydrometeor mapping obtained during various OLYMPEX cases. Some features retrieved in these cases include a layer of enhanced aggregation about 2km above the melting layer, hypothesized to be maintained by orographic uplift. This layer is often situated above a layer of denser, aligned particles. Regions of riming and supercooled liquid water beneath generating cells are also identified by our retrieval algorithm. Comparisons to in-situ observations and evaluation of scattering models will be presented.

Munchak, S. Joseph↗
NASA NTRS2001

A Canonical Ensemble Correlation Prediction Model for Seasonal Precipitation Anomaly

This report describes an optimal ensemble forecasting model for seasonal precipitation and its error estimation. Each individual forecast is based on the canonical correlation analysis (CCA) in the spectral spaces whose bases are empirical orthogonal functions (EOF). The optimal weights in the ensemble forecasting crucially depend on the mean square error of each individual forecast. An estimate of the mean square error of a CCA prediction is made also using the spectral method. The error is decomposed onto EOFs of the predictand and decreases linearly according to the correlation between the predictor and predictand. This new CCA model includes the following features: (1) the use of area-factor, (2) the estimation of prediction error, and (3) the optimal ensemble of multiple forecasts. The new CCA model is applied to the seasonal forecasting of the United States precipitation field. The predictor is the sea surface temperature.

Shen, Samuel S. P.↗
DOE OSTI2021

Environment-sensitivity functions for gross primary productivity in light use efficiency models

The sensitivity of photosynthesis to environmental changes is essential for understanding carbon cycle responses to global climate change and for the development of modeling approaches that explains its spatial and temporal variability. We collected a large variety of published sensitivity functions of gross primary productivity (GPP) to different forcing variables to assess the response of GPP to environmental factors. These include the responses of GPP to temperature; vapor pressure deficit, some of which include the response to atmospheric CO 2 concentrations; soil water availability (W); light intensity; and cloudiness. These functions were combined in a full factorial light use efficiency (LUE) model structure, leading to a collection of 5600 distinct LUE models. Each model was optimized against daily GPP and evapotranspiration fluxes from 196 FLUXNET sites and ranked across sites based on a bootstrap approach. The GPP sensitivity to each environmental factor, including CO 2 fertilization, was shown to be significant, and that none of the previously published model structures performed as well as the best model selected. From daily and weekly to monthly scales, the best model's median Nash-Sutcliffe model efficiency across sites was 0.73, 0.79 and 0.82, respectively, but poorer at annual scales (0.23), emphasizing the common limitation of current models in describing the interannual variability of GPP. Although the best global model did not match the local best model at each site, the selection was robust across ecosystem types. The contribution of light saturation and cloudiness to GPP was observed across all biomes (from 23% to 43%). Temperature and W dominates GPP and LUE but responses of GPP to temperature and W are lagged in cold and arid ecosystems, respectively. The findings of this study provide a foundation towards more robust LUE-based estimates of global GPP and may provide a benchmark for other empirical GPP products.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1991

Infiltration/cure modeling of resin transfer molded composite materials using advanced fiber architectures

A model was developed which can be used to simulate infiltration and cure of textile composites by resin transfer molding. Fabric preforms were resin infiltrated and cured using model generated optimized one-step infiltration/cure protocols. Frequency dependent electromagnetic sensing (FDEMS) was used to monitor in situ resin infiltration and cure during processing. FDEMS measurements of infiltration time, resin viscosity, and resin degree of cure agreed well with values predicted by the simulation model. Textile composites fabricated using a one-step infiltration/cure procedure were uniformly resin impregnated and void free. Fiber volume fraction measurements by the resin digestion method compared well with values predicted using the model.

Loos, Alfred C.↗
NASA NTRS1986

Model analysis of remotely controlled rendezvous and docking with display prediction

Manual control of rendezvous and docking (RVD) of two spacecraft in low earth orbit by a remote human operator is discussed. Experimental evidence has shown that control performance degradation for large transmission delays (between spacecraft and operations control center) can be substantially improved by the introduction of predictor displays. An intial Optimal Control Model (OCM) analysis of RVD translational and rotational perturbation control was performed, with emphasis placed on the predictive capabilities of the combined Kalman estimator/optimal predictor with respect to control performance, for a range of time delays, motor noise levels and tracking axes. OCM predictions are then used as a reference for comparing tracking performance with a simple predictor display, as well as with no display prediction at all. Use is made here of an imperfect internal model formulation, whereby it is assumed that the human operator has no knowledge of the system transmission delay.

Milgram, P.↗
DOE OSTI2020

Data-Based Resilience Enhancement Strategies for Electric-Gas Systems Against Sequential Extreme Weather Events

Some extreme weather events, such as the hurricane, pass through an area sequentially and thus are called sequential extreme weather events (SEWEs). This paper proposes a data-based robust optimization (RO) model to enhance the resilience of the integrated electricity and gas system (IEGS) against SEWEs. Specifically, the SEWE strikes the IEGS sequentially. After each attack, the system state is adjusted immediately to minimize the maximized expected system cost caused by the SEWE. The attack-defense procedures are repeated alternatively during the SEWE. Preventive measures, hardening, are made in advance to reduce the impact of sequential attacks. The entire process is formulated as a multi-period RO model. Furthermore, it is proved that the most effective resilience enhancement strategies for this model are the same as those for a two-stage RO model, which can be solved by the nested column-and-constraint generation (C&CG) algorithm. In addition, the property of SEWEs, sequentially endangering limited regions of the IEGS, is incorporated to build a data-based uncertainty set and reduce its conservativeness. Simulation results on two IEGSs validate the effectiveness of the proposed model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Abundance matching analysis of the emission-line galaxy sample in the extended Baryon Oscillation Spectroscopic Survey

We present the measurements of the small-scale clustering for the emission-line galaxy (ELG) sample from the extended Baryon Oscillation Spectroscopic Survey (eBOSS) in the Sloan Digital Sky Survey IV (SDSS-IV). We use conditional abundance matching method to interpret the clustering measurements from 0.34 to 70 h -1 Mpc. In order to account for the correlation between properties of ELGs and their environment, we add a secondary connection between star formation rate of ELGs and halo accretion rate. Three parameters are introduced to model the ELG [O II ] luminosity and to mimic the target selection of eBOSS ELGs. The parameters in our models are optimized using Markov Chain Monte Carlo (MCMC) method. We find that by conditionally matching star formation rate of galaxies and the halo accretion rate, we are able to reproduce the eBOSS ELG small-scale clustering within 1σ error level. Our best-fitting model shows that the eBOSS ELG sample only consists of ~ 12 per cent of all star-forming galaxies, and the satellite fraction of eBOSS ELG sample is 19.3 per cent. We show that the effect of assembly bias is ~ 20 per cent on the two-point correlation function and ~ 5 per cent on the void probability function at scale of r ~ 20 h -1 Mpc.

79 ASTRONOMY AND ASTROPHYSICS↗