Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Synthesis and characterization of CuInS{sub 2} nanostructure by ultrasonic-assisted method and different precursors

Graphical abstract: Display Omitted Highlights: ► CuInS{sub 2} nanoparticles were synthesized by ultrasonic assisted method. ► CuInS{sub 2} nanoparticles obtained after annealing at 350 °C for 1 h. ► The effect of some parameters including ultrasonic was investigated. -- Abstract: This paper reports on the synthesis of CuInS{sub 2} nanostructure via an ultrasonic assisted method by employing different sulfur source. Morphology, structure and composition of the obtained products were characterized by X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), scanning electron microscope (SEM), infrared (IR) spectrum, and photoluminescence (PL) spectroscopy. The effects of ultrasonic irradiation, power and time of irradiation, surfactant, and type of copper source were investigated.

36 MATERIALS SCIENCE↗

Improvements in electrical and dielectric properties of substituted multiferroic LaMnO{sub 3} based nanostructures synthesized by co-precipitation method

Graphical abstract: Display Omitted Highlights: ► Simultaneous double ion substitutions philosophy is introduced in LaMnO{sub 3}. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are not reported previously. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are synthesized by co-precipitation method. ► The 12 fold increase in resistivity of LaMnO{sub 3} nanostructures is observed. -- Abstract: A series of La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles (where x, y = 0, 0.25, 0.50, 0.75 and 1.0) has been synthesized by the chemical co-precipitation method, involving double ion substitution philosophy. The nanoparticles were characterized by thermo gravimetric analysis (TGA), X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, vibrating sample magnetometer (VSM), DC electrical resistivity and dielectric measurements. The XRD and FTIR analysis confirmed the single orthorhombic phase and the crystallite size were found in the range of 16–34 nm. DC resistivity exhibited very interesting behavior which increased from 1.41 × 10{sup 8} to 16.35 ± 0.2 × 10{sup 8} Ω cm upon complete double ions replacement of La and Mn with Gd and Cr, respectively. This very high resistivity variation upon substitution definitely would open new avenues for applications of these materials in microwave devices and other related areas. The dielectric properties of these nanoparticles were also studied at room temperature in the range of 6 kHz to 5 MHz and the maximum dielectric behavior (ε′ = 2.86 × 10{sup 3}, tan δ = 5.41, ε″ = 15.5 × 10{sup 3}) was exhibited by La{sub 0.75}Gd{sub 0.25}Mn{sub 0.75}Cr{sub 0.25}O{sub 3} at 6 kHz. Hysteresis loops measurements showed that the synthesized nanomaterials are paramagnetic in nature at room temperature.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of Li{sub 4}Ti{sub 5}O{sub 12}/C nanostructured composites: Morphology and electrochemical performance

Graphical abstract: Display Omitted Highlights: ► Nanostructured composite Li{sub 4}Ti{sub 5}O{sub 12}/C was obtained hydrothermally. ► The amount of carbon black influenced significantly the morphology of the composite. ► Rate capability of Li{sub 4}Ti{sub 5}O{sub 12} was improved by the synthesis in presence of carbon black. ► Coulombic capacity of 150 mAh g{sup −1} was obtained at a discharging rate of even 10 C. -- Abstract: Li{sub 4}Ti{sub 5}O{sub 12}/C composites with low (3 wt.%) and high (33 wt.%) carbon black content as well as carbon-free Li{sub 4}Ti{sub 5}O{sub 12} were prepared in two steps under identical conditions: hydrothermal reaction at 130 °C and post-calcination at 400 °C. The X-ray diffraction experiments confirmed the spinel structure of Li{sub 4}Ti{sub 5}O{sub 12} in all samples. The carbon content altered significantly the morphology of obtained micro/nanoparticles. The Li{sub 4}Ti{sub 5}O{sub 12}/C composite with the high carbon content showed the highest electrical conductivity (2.0 S cm{sup −1}), and displayed also extraordinary electrochemical performance: the cyclovoltammograms consisted of well defined reversible redox peaks at a scan rate as high as 10 mV s{sup −1}, while, by galvanostatic cycling, the coulombic capacity of 150 mAh g{sup −1} was evidenced at a discharging rate of 10 C.

36 MATERIALS SCIENCE↗

Characterization of nanostructured iron selenide thin films grown by chemical route at room temperature

Highlights: ► Nanostructured FeSe thin films were successfully synthesized at room temperature by CBD method. ► The XRD and EDAX characterization confirms nanocrystalline nature of FeSe. ► The SEM and AFM show microporous morphology with nanorods and nanoplates of FeSe. -- Abstract: Iron selenide thin films have been deposited onto glass substrates by using chemical bath deposition technique. Structural characterization of iron selenide thin films was carried out by means of X-ray diffraction and Fourier transforms infrared spectrum. The morphological characterization of FeSe thin film was carried out using scanning electron microscopy and atomic force microscopy, which revealed porous grain morphology of FeSe with some nano rectangular rods and plates grown on it. The as-deposited thin films exhibited optical band gap energy 2.60 eV. The as deposited FeSe thin films are semiconducting in nature with p-type electrical conductivity. The room temperature electrical resistivity is of the order of 1.1 × 10{sup 5} Ω-cm with activation energy 0.26 and 0.95 eV, respectively, in low and high temperature region.

36 MATERIALS SCIENCE↗

Preparation, characterization and electronic structures of Fe-doped TiO{sub 2} nanostructured fibers

Graphical abstract: - Highlights: • Mesoporous Fe-doped TiO{sub 2} fibers were prepared on a large scale by sol–gel method. • Fe-doping greatly enhance the visible-light photocatalytic activity of TiO{sub 2} fibers. • First-principle study the effects of different replaced sites on the absorption edge and band gap. - Abstract: Mesoporous and nanostructured Fe-doped TiO{sub 2} fibers were fabricated on a large scale by sol–gel method combined with the polyorganotitanium as the precursor and ferric nitrate as dopant. The prepared fibers were characterized by XRD, XPS, SEM, TEM, N{sub 2} adsorption–desorption isotherms and UV–vis spectroscopy. The photocatalytic activity was evaluated by photodegradation of methyl orange (MO) aqueous solution under UV and visible-light irradiation. Compared with different types of photocatalysts, the 0.5%Fe-doped TiO{sub 2} fibers exhibit super photocatalytic activity. This is ascribed to the fact that the Fe-doping induces the shift of the absorption edge into the visible-light range with the narrowing of the band gap and reduces the recombination of the photo-generated electrons and holes. Furthermore, first-principle study for their electronic structures was carried out to confirm the effects of different replaced lattice sites on the red shift of the absorption edge and the changes of the band gap of the Fe-doped TiO{sub 2} fibers.

36 MATERIALS SCIENCE↗

Wet chemical synthesis of quantum confined nanostructured tin oxide thin films by successive ionic layer adsorption and reaction technique

Graphical abstract: - Highlights: • Quantum confined SnO{sub 2} thin films were synthesized at 80 °C by SILAR technique. • Film formation mechanism is discussed. • Films with snow like crystallite morphology offer high specific surface area. • The blue-shifted value of band gap confirmed the quantum confinement effect. • Present synthesis has advantages – low cost, low temperature and green friendly. - Abstract: Quantum confined nanostructured SnO{sub 2} thin films were synthesized at 353 K using ammonium chloride (NH{sub 4}Cl) and other chemicals by successive ionic layer adsorption and reaction technique. Film formation mechanism is discussed. Structural, morphological, optical and electrical properties were investigated and compared with the as-grown and annealed films fabricated without NH{sub 4}Cl solution. SnO{sub 2} films were polycrystalline with crystallites of tetragonal structure with grain sizes lie in the 5–8 nm range. Films with snow like crystallite morphology offer high specific surface area. The blue-shifted value of band gap of as-grown films confirmed the quantum confinement effect of grains. Refractive index of the films lies in the 2.1–2.3 range. Films prepared with NH{sub 4}Cl exhibit relatively lower resistivity of the order of 10{sup 0}–10{sup −1} Ω cm. The present synthesis has advantages such as low cost, low temperature and green friendly, which yields small particle size, large surface–volume ratio, and high crystallinity SnO{sub 2} films.

36 MATERIALS SCIENCE↗

Flower-like nanostructure MNb{sub 2}O{sub 6} (M = Mn, Zn) with high surface area: Hydrothermal synthesis and enhanced photocatalytic performance

Graphical abstract: - Highlights: • MNb{sub 2}O{sub 6} was prepared by a mild two-step hydrothermal method. • Their flower-like nanostructure morphology was studied by SEM and TEM. • High BET surface areas for MnNb{sub 2}O{sub 6} (∼50 m{sup 2}/g) and ZnNb{sub 2}O{sub 6} (∼100 m{sup 2}/g). • Band gap energies were estimated by UV–vis diffuse reflectance spectra. • Photocatalytic activities were evaluated under UV-light irradiation. - Abstract: Nano-scaled MNb{sub 2}O{sub 6} (M = Mn, Zn) was successfully synthesized via a two-step hydrothermal method. It is important to control the exact pH of the reaction solution in order to obtain pure products. The as-prepared samples both crystallize in the columbite structure. Interestingly, the products possess a flower-like morphology in a pseudo-six-fold symmetry, which is in fact arrayed by two-dimensional nanosheets. Their surface areas (51 m{sup 2}/g for MnNb{sub 2}O{sub 6} and 103 m{sup 2}/g for ZnNb{sub 2}O{sub 6}) are about 25–50 times of those prepared by solid state reaction. UV–vis diffuse reflectance spectra show the nano-scaled sample has a stronger absorption and a narrower band gap than its bulk form. The estimated band gap energies are 2.70 eV (MnNb{sub 2}O{sub 6}) and 3.77 eV (ZnNb{sub 2}O{sub 6}), respectively. The nano-scaled ZnNb{sub 2}O{sub 6} exhibits a double enhancement of photocatalytic activity in the decolorization of methylene blue than bulk ZnNb{sub 2}O{sub 6}.

36 MATERIALS SCIENCE↗

Chemical degradation of trimethyl phosphate as surrogate for organo-phosporus pesticides on nanostructured metal oxides

Nanostructured TiO{sub 2} and mixed oxides of Ti and Fe, Hf, In, Mn or Zr -were prepared by homogeneous hydrolysis of aqueous solution of metal sulphates with urea. The oxides were characterised by X-ray powder diffraction (XRD), scanning electron microscopy, particle size distribution, surface area and porosity. The oxide materials consists of a few nanometre primary crystals (mainly anatase) arranged in a few micrometre regular spherical agglomerates with specific surface area 133–511 m{sup 2} g{sup −1}. The FTIR diffuse spectroscopy was used for monitoring chemical degradation of trimethylphosphate (TMP) as a surrogate for organo-phosphorus pesticides under ambient and higher temperatures. Undoped TiO{sub 2} and Ti,Mn-mixed oxide were most active in cleavage (hydrolysis) of CH{sub 3}O from TMP at room temperature and 100 °C. Cleavage of CH{sub 3}O in the other studied mixed oxides was not complete until temperature exceeds the boiling point of TMP.

36 MATERIALS SCIENCE↗

The role of cobalt doping on magnetic and optical properties of indium oxide nanostructured thin film prepared by sol–gel method

Highlights: • Cobalt doped indium oxide thin films have been prepared by a sol–gel method. • The films have a thickness less than 100 nm and grain size less than 10 nm. • The lattice parameters and grain size of films decrease as Co content increase. • The optical band gap of films increases as the grain size decrease. • The films' magnetic behaviour is sensitive to ratio of oxygen defects per Co ions. - Abstract: The effect of Co doping concentration, (x = 0.025–0.2), in In{sub 2−x}Co{sub x}O{sub 3} thin film was investigated by X-rays diffraction (XRD), transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), Ultraviolet visible spectrophotometer (UV–vis) and vibrating sample magnetometer (VSM). All films were prepared by sol–gel technique followed by spin coating process. The XRD and XPS measurements indicate that Co{sup +2} has been successfully substituted in In{sup +3} site. The TEM measurement shows nanostructure morphology of the films. The doping of Co in indium oxide resulted in a decrease in the lattice parameters and grain size while the band gap increased with increasing Co concentration. Further, by comparing VSM and XPS results, the magnetic behaviour of the films were found to be sensitive to Co concentrations, oxygen vacancies and ratio of oxygen defects to Co concentrations. The magnetic behaviour of the prepared films was explained using bound magnetic polaron (BMP) model.

36 MATERIALS SCIENCE↗

Investigation of intrinsic and extrinsic defects effective role on producing intense red emission in ZnO:Eu nanostructures

Highlights: • Effective role of defects on producing red emission at indirect excitation. • V{sub Zn} and V{sub O} defects have important role on energy transfer. • Mg related defects and Zn{sub i} defects were responsible for blue emission. • Extrinsic and intrinsic defects mediated energy transfer to sensitize Eu{sup 3+} ions. • Decrease of red emission because of diminishing in oxygen vacancy. - Abstract: Europium doped ZnO nanorads and nanosheets were synthesized by hydrothermal method. Effects of Mg doping, morphology and annealing in oxygen ambient on structural and optical properties of ZnO nanostructures were investigated using X-ray diffraction (XRD), particle size analysis (PSA), thermo gravimetric analysis (TGA), differential thermal analysis (DTA), differential thermo gravimetry (DTG), scanning electron microscopy (SEM) and photoluminescence spectroscopy (PL). This study recommends that both of intrinsic and extrinsic defects facilitate energy transfer (ET) from the ZnO host to Eu{sup 3+} ions and consequently have efficient role on producing intense red emission at indirect excitation. The results also showed that annealing process improved the crystal structure of ZnO nanosheets due to decrease of surface defects; however decreased ET and red emission because of diminishing in oxygen vacancy. In addition in ZnO nanorods sample with more surface area in comparison with ZnO nanosheets sample deep level emissions are enhanced.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A new strategy on utilizing nitrogen doped TiO{sub 2} in nanostructured solar cells: Embedded multifunctional N-TiO{sub 2} scattering particles in mesoporous photoanode

Highlights: • N-doped TiO{sub 2} scattering particles were synthesized for embedding into commercial photoanode of dye sensitized solar cells. • Embedded scatterers improved optical and electrical features of the cells. • These multifunctional scatterers increased cell performance up to 17%. - Abstract: Aggregated sub-micron size nitrogen doped TiO{sub 2} (N-TiO{sub 2}) particles with superior optical and electrical features were successfully synthesized for embedding into commercial mesoporous TiO{sub 2} photoelectrode of dye sensitized solar cells (DSSCs) as the light scattering particles compared to undoped one. X-ray photoelectron spectroscopy and absorption spectra confirmed that the titanium dioxide is sufficiently doped by nitrogen in N-TiO{sub 2} sample. Employing these high-surface N-TiO{sub 2} in mesoporous photoelectrode of solar cells, the power conversion efficiency of 8% has been achieved which shows 17% improvement for the optimum embedded level of doping (30 wt%) compared to commercial photoelectrode without additive; while enhanced efficiency is only 3% embedding undoped sub-micron size TiO{sub 2} particles. These results can introduce the novel multifunctional photoelectrode for nanostructured solar cells with enhanced values of scattering efficiency and improved electrical features including trap states density reduction in comparison to commercial mesoporous photoelectrodes.

14 SOLAR ENERGY↗

Electrical and structure properties for the alloy system Ce{sub x}La{sub 1−x}O{sub y} nanostructure thin films

Highlights: • Glassy Ce{sub x}La{sub 1−x}O{sub y} nanostructure films were grown on Si(1 0 0) substrate using the sol–gel method. • G{sub p} = ωϵ{sub 0}ϵ′ tan(δ) was calculated at different temperatures. • Electrical and structural the Ce{sub x}La{sub 1−x}O{sub y} samples were studied. • The conductivity-temperature study shows that the compound obeys the Arrhenius law. - Abstract: The Ce{sub x}La{sub 1−x}O{sub y} samples are synthesized, characterized and their electrical properties are reported at different molar ratios in the frequency range of 10{sup −1}–10{sup +5} Hz. Ac conductivity and permittivity data are analyzed by using conductivity formalism. The values of capacitance and tan(δ) were recorded with respect to different frequencies and temperatures. X-ray diffraction (XRD) patterns of the films show that the films posses crystalline phases. Surface morphology of the films is analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) analyses reveal that elemental composition is in right stoichiometry. Electrical characterizations of the Ce{sub x}La{sub 1−x}O{sub y} samples were done by capacitance–voltage (C–V) and current density–voltage (J–V) measurements of MOS structures. Investigation showed high value of k = 44.80 and low leakage current (∼1 × 10{sup −5} A/cm{sup 2}) of the Ce{sub 0.4}La{sub 0.6}O{sub y} film.

36 MATERIALS SCIENCE↗

Silica supported TiO{sub 2} nanostructures for highly efficient photocatalytic application under visible light irradiation

Highlights: • Synthesis of silica–titania nanocomposite by simple and facile chemical route and characterization of the materials. • Excellent catalytic activity on organic pollutant methylene blue under the visible light irradiation. • Photocatalytic rate is much higher than commercial P25 TiO{sub 2} catalyst powder. • The higher activity is attributed to the special structure and synergistic effect of the materials which has immense application potential. - Abstract: Titanium dioxide decorated silica nanospheres have been synthesized by a simple wet chemical approach. X-ray diffraction, electron microscopy and energy dispersive X-ray analysis revealed that anatase phase of TiO{sub 2} nanostructures, with exposed {0 0 1} and {1 0 1} facets, are anchored onto the amorphous silica spheres of ∼60 nm diameter. The photocatalytic activity of the sample under visible light irradiation was examined. It is found that photocatalytic efficiency of the material is better than commercial P25 TiO{sub 2} photocatalyst and the result is attributed to the unique synergistic effect of SiO{sub 2}–TiO{sub 2} nanocomposite structure resulting enhanced charge separation and charge transfer.

36 MATERIALS SCIENCE↗

Biomass-derived carbon/silicon three-dimensional hierarchical nanostructure as anode material for lithium ion batteries

Highlights: • The 3D conductive framework is fabricated from biomass-derived carbon. • The enhanced performance is attributed to in-suit coating and 3D skeleton of carbon. • The synthetic strategy is low-cost and environment friendly. - Abstract: Three-dimensional hierarchical silicon/carbon nanostructure (3D AC-Si) is applied as the anode material for lithium-ion batteries (LIBs), where encapsulated Si NPs are uniformly bonded over interconnected carbon framework. The unique structure benefits from the binary functions of the naturally conductive network of biomass carbon and the in-suit carbon coating of dopamine. This 3D AC-Si composite behaves high specific capacity and good cycling stability (3353 mAh g{sup −1} at a current density of 0.2 A g{sup −1}), as well as enhanced rate capability. Our findings exhibit a new strategy for preparing low-cost and environment friendly silicon/carbon composite and has potential to be extended to other anode materials for high-performance LIBs.

36 MATERIALS SCIENCE↗

Enhanced DSSCs performance of TiO2 nanostructure by surface passivation layers

Highlights: • Passivation layers of MgO, CaCO{sub 3}, ZrO{sub 2} and SnO{sub 2} on TiO{sub 2} electrode deposited in copper container by spin coating method. • XRD and EDX analysis give detail information about surface passivation layers deposition on TiO{sub 2} electrode. • Achieved highest efficiency for electrode with MgO passivation layer it is about 6.05%. • Highest electron lifetime of 0.65 ms. - Abstract: Rutile titanium oxide (TiO{sub 2}) synthesized in copper containers, was spin-coated with different surface passivation layers such as magnesium oxide (MgO), calcium carbonate (CaCO{sub 3}), zirconium oxide (ZrO{sub 2}), and tin oxide (SnO{sub 2}). The deposition of these passivation layers on TiO{sub 2} confirmed with the help of XRD and EDX analysis, leads to changes in surface morphology induced by the passivation layers demonstrated by FE-SEM imaging. The highest photoconversion efficiency obtained for TiO{sub 2} electrode with MgO passivation layer (6.05%), respective incident photon conversion efficiency was 52%. After introduction of passivation layers on the TiO{sub 2} nanostructure, electron lifetime increased from 0.48 ms to 0.65 ms and charge transfer resistance decreased from 36.9 Ω cm (pristine TiO{sub 2} electrode) to 20.16 Ω cm (MgO passivation layer).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Observation of oxo-bridged yttrium in TiO2 nanostructures and their enhanced photocatalytic hydrogen generation under UV/Visible light irradiations

Highlights: • Synthesis of yttrium doped TiO{sub 2} nanoparticles (NPs) and nanorods (NRs) through a facile wet chemical method. • The doped Y ions are found to be oxo-bridged with the host TiO{sub 2} through Y-O-Ti like formation. • The NPs of Y:TiO{sub 2} showed increased photocatalytic hydrogen production efficiency. • The observed efficiency of NPs is attributed to their three-dimensional confinement. - Abstract: Yttrium doped TiO{sub 2} (Y:TiO{sub 2}) nanoparticles (NPs) and nanorods (NRs) are synthesized using facile wet chemical methods. Interestingly, the doped Y ions are found to be oxo-bridged with the host TiO{sub 2} through Y-O-Ti like formation as confirmed from their XRD and XPS studies. The photocatalytic hydrogen production efficiency of the synthesized nanostructures was studied under UV and visible light irradiations. The NPs of Y:TiO{sub 2} showed increased activity as compared to NRs. The observed efficiency of NPs is attributed to their three-dimensional confinement, where it facilitated a stronger oxo-bridging formation that improved the metal-to-metal charge transfer process, reducing the band gap and surface energies as compared to NRs. As investigated in this study, the oxo-bridging formation in the doped metal-oxide systems is relatively promising as this configuration largely favors the photocatalytic process by re-designing the charge separation and transfer processes as compare to the other conventional systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of the role of deposition rate on optical, microstructure and ethanol sensing characteristics of nanostructured Sn doped In2O3 films

Highlights: • Deposition rate can play an important role in gas sensing of In{sub 2}O{sub 3}:Sn films. • The crystallite size and linear defects of the films is estimated by eCMWP method. • The correlation between the optical, microstructure and gas sensing properties is studied. • The size distribution behavior of samples is in agreement with the results of porosity. • Optimum deposition rate for In{sub 2}O{sub 3}:Sn films is 0.2 nm/s. - Abstract: In this paper, Sn doped In{sub 2}O{sub 3} (In{sub 2}O{sub 3}:Sn) nanostructured films as metal oxide semiconductor material which is very important in optoelectronics and gas sensing industries, were prepared by thermal evaporation technique. It is discussed how different deposition rate (0.1, 0.2, 0.3 and 0.4 nm/s) affects the optical, electrical, microstructural and ethanol gas sensing characteristics of In{sub 2}O{sub 3}:Sn films and must be precisely monitored. The gas sensing performance of the films was evaluated in terms of gas concentration and operating temperature. A correlation between the crystallite size, porosity, dislocation density, outer cut-off radius of dislocation, optical band gap, activation energy and sensitivity of the films was established. The results demonstrate that the maximum sensitivity to ethanol vapors can be obtained for the sample grown at deposition rate of 0.2 nm/s. The response and recovery times of this sensor exposed to 100 ppm of ethanol vapors were determined and found to be 9.0 s and 3.9 s, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave-assistant hydrothermal synthesis of SnO2@ZnO hierarchical nanostructures enhanced photocatalytic performance under visible light irradiation

Highlights: • A photocatalyst of SnO{sub 2}@ZnO HNSs is prepared via a microwave-assistant hydrothermal method. • Enhanced photodegradation of methylene blue under the visible light irradiation has been observed. • The defect in photocatalyst is the main photocatalytic mechanism under the visible light irradiation. • The superoxide radical is the main photoactive species. - Abstract: In this paper, for the first time, SnO{sub 2}@ZnO hierarchical nanostructures (HNSs) were synthesized by a simple two-step microwave-assistant hydrothermal method. Systematical characterization of the SnO{sub 2}@ZnO HNSs revealed that the rutile SnO{sub 2} nanowires (NWs) were uniformly and tightly grown on the entire surface of each ZnO nanoflowers (NFs). The photocatalytic performance of the SnO{sub 2}@ZnO HNSs showed a remarkably enhanced photocatalytic performance under visible light irradiation (400 nm≤λ ≤ 800 nm). The photoluminescence (PL) spectrum results indicated that the defect related energy level is the main mechanism of the photocatalytic performance under the visible light irradiation. The unique morphology and heterojunction structures in SnO{sub 2}@ZnO HNSs were the core enhanced mechanism in photodegradation process. The advantage endowed with the microwave-assistant hydrothermal method can result in the efficient spatial charge separation between ZnO nanorods (NRs) and SnO{sub 2} NWs and reduce the charge recombination along the heterojunction, which makes SnO{sub 2}@ZnO HNSs a highly promising for photocatalytic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗