Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mobile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

An Interlaboratory Evaluation of Drift Tube Ion Mobility–Mass Spectrometry Collision Cross Section Measurements

Collision cross section (CCS) measurements resulting from ion mobility-mass spectrometry (IM-MS) experiments provide a promising orthogonal dimension of structural information in MS-based analytical separations. As with any molecular identifier, interlaboratory standardization must precede broad range integration into analytical workflows. In this study, we present a reference drift tube ion mobility mass spectrometer (DTIM-MS) where improvements on the measurement accuracy of experimental parameters influencing IM separations provide standardized drift tube, nitrogen CCS values (DTCCSN2) for over 120 unique ion species with the lowest measurement uncertainty to date. The reproducibility of these DTCCSN2 values are evaluated across three additional laboratories on a commercially available DTIM-MS instrument. The traditional stepped field CCS method performs with a relative standard deviation (RSD) of 0.29% for all ion species across the three additional laboratories. The calibrated single field CCS method, which is compatible with a wide range of chromatographic inlet systems, performs with an average, absolute bias of 0.54% to the standardized stepped field DTCCSN2 values on the reference system. The low RSD and biases observed in this interlaboratory study illustrate the potential of DTIM-MS for providing a molecular identifier for a broad range of discovery based analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Revealing the Intrinsic Li Mobility in the Li 2 MnO 3 Lithium-Excess Material

One of the most promising avenues for future high energy Li-ion batteries originate from the family of Li-rich layered cathodes. However, while exhibiting excellent initial capacity, these materials also suffer from voltage fade, high impedance, and poor rate capability, particularly in the Mn-rich, high Li excess concentration regime. Though it is clear that the Li 2 MnO 3 component contributes to the high capacity as well as the chemical and structural degradation of the material, the inherent ionic conductivity of the material has not been clarified. Here, we investigate the delithiation mechanism, involving coherent Li migration from two layers by first-principles density functional theory. Surprisingly, and contrary to expectations from available experimental results, we find that the pristine material exhibits excellent Li mobility enabling facile Li extraction from both the transition metal layer and Li-layer. Generally, the Li-extractions are highly accelerated by di- and trivacancy clusters, which stabilize the saddle point tetrahedral sites. Hence, we deduce that the observed inferior rate behavior of this class of Li cathode materials is not due to intrinsic poor bulk ionic mobility, but more likely due to surface-passivation, structural deterioration, and/or particle-particle electrode-level transport limitations.

25 ENERGY STORAGE↗
DOE OSTI2017

Effects of Anion Mobility on Electrochemical Behaviors of Lithium–Sulfur Batteries

The electrolyte is a crucial component of lithium-sulfur (Li-S) batteries, as it controls polysulfide dissolution, charge shuttling processes, and solid-electrolyte interphase (SEI) layer formation. Experimentally, the overall performance of Li-S batteries varies with choice of solvent system and Li-salt used in the electrolyte, and a lack of predictive understanding about the effects of individual electrolyte components inhibits the rational design of electrolytes for Li-S batteries. Here we analyze the role of the counter anions of common Li salts (such as TfO-, FSI-, TFSI-, and TDI-) when dissolved in DOL/DME (1:1 vol.) for use in Li-S batteries. The evolution of ion-ion and ion-solvent interactions due to vari-ous anions was analyzed using 17O NMR and pulsed-field gradient (PFG) NMR and then correlated with electrochemi-cal performance in Li-S cells. These data reveal that the for-mation of the passivation layer on the anode and the loss of active materials from the cathode (evidenced by polysulfide dissolution) are related to anion mobility and affinity with lithium polysulfide, respectively. For future electrolyte de-sign, anions with lower mobility and weaker interactions with lithium polysulfides may be superior candidates for increasing the long-term stability of Li-S batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Mobility of Radionuclides in Fractured Carbonate Rocks: Lessons from a Field-Scale Transport Experiment

Current research on radionuclide disposal is mostly conducted in granite, clay, saltstone, or volcanic tuff formations. These rock types are not always available to host a geological repository in every nuclear waste-generating country, but carbonate rocks may serve as a potential alternative. To assess their feasibility, a forced gradient cross-borehole tracer experiment was conducted in a saturated fractured chalk formation. The mobility of stable Sr and Cs (as analogs for their radioactive counterparts), Ce (an actinide analog), Re (a Tc analog), bentonite particles, and fluorescent dye tracers through the flow path was analyzed. The migration of each of these radionuclide analogs (RAs) was shown to be dependent upon their chemical speciation in solution, their interactions with bentonite, and their sorption potential to the chalk rock matrix. The brackish groundwater resulted in flocculation and immobilization of most particulate RAs. Nevertheless, the high permeability of the fracture system allowed for fast overall transport times of all aqueous RAs investigated. This study suggests that the geochemical properties of carbonate rocks may provide suitable conditions for certain types of radionuclide storage (in particular, brackish, high-porosity, and low-permeability chalks). Nevertheless, careful consideration should be given to high-permeability fracture networks that may result in high radionuclide mobility.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2018

Field Application of 238 U/ 235 U Measurements To Detect Reoxidation and Mobilization of U(IV)

Biostimulation to induce reduction of soluble U(VI) to relatively immobile U(IV) is an effective strategy for decreasing aqueous U(VI) concentrations in contaminated groundwater systems. If oxidation of U(IV) occurs following the biostimulation phase, U(VI) concentrations increase, challenging the long-term effectiveness of this technique. However, detecting U(IV) oxidation through dissolved U concentrations alone can prove difficult in locations with few groundwater wells to track the addition of U to a mass of groundwater. In this paper, we propose the 238 U/ 235 U ratio of aqueous U as an independent, reliable tracer of U(IV) remobilization via oxidation or mobilization of colloids. Reduction of U(VI) produces 238 U-enriched U(IV), whereas remobilization of solid U(IV) should not induce isotopic fractionation. The incorporation of remobilized U(IV) with a high 238 U/ 235 U ratio into the aqueous U(VI) pool produces an increase in 238 U/ 235 U of aqueous U(VI). Finally, during several injections of nitrate to induce U(IV) oxidation, 238 U/ 235 U consistently increased, suggesting 238 U/ 235 U is broadly applicable for detecting mobilization of U(IV).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Hydrophilic and Apolar Hydration in Densely Grafted Cationic Brushes and Counterions with Large Mobilities

We employ all-atom molecular dynamics (MD) simulation framework to unravel water microstructure and ion properties for cationic [Poly(2-(methacryloyloxy)ethyl trimethylammonium chloride] (PMETAC) brushes with chloride ions as counterions. First, we identify locally separate water domains (or first hydration shells) each around the {N(CH 3 ) 3 } + and the C=O functional groups of the PMETAC chain and one around the Cl - ion. These first hydration shells around the respective moieties overlap and the extent of the overlap depends on the nature of the species triggering it. Second, despite the overlap, the water molecules in these domains demonstrate disparate properties dictated by the properties of the atoms/groups around which they are located. For example, the presence of the methyl groups make the {N(CH 3 ) 3 } + group trigger apolar hydration as evidenced by the corresponding orientation of the dipole of the water molecules around the {N(CH 3 ) 3 } + moiety. These water molecules around the N(CH 3 ) 3 } + group also have enhanced tetrahedrality as compared to the water molecules constituting the hydration layer around the C=O group and the Cl - counterion. Our simulations also identify that there is an intervening water layer between the Cl - ion and {N(CH 3 ) 3 } + group: this layer prevents the Cl - ion from coming very close to the {N(CH 3 ) 3 } + group. As a consequence, there is a significantly large mobility of the Cl - ions inside the PMETAC brush layer. Furthermore, the C=O group of the PE chain, due to the partial negative charge on the oxygen atom and the specific structure of the PMETAC brush system, demonstrates strongly hydrophilic behavior and enforces a specific dipole response of water molecules analogous to that experienced by water around anionic species of high charge density. As a result, our findings confirm that PMETAC brushes undergo hydrophilic hydration at one site, apolar hydration at another site, and ensures large mobility of the supported Cl- counterions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Side Chain Engineering of Near-IR Aza-BODIPY Dyes Enables Processable Films with High Hole Mobility in Diodes

Boron chelated azadipyrromethene (Aza-BODIPY) derivatives are promising candidates for near-infrared optoelectronic applications due to their tunable absorption, electron-deficient core, and strong π-conjugation. Here, in this work, we synthesized and studied a series of 1-naphthylethynyl-substituted aza-BODIPY molecules featuring hexyl or hexyloxy solubilizing groups at either the proximal or the distal phenyl positions. These substitutions were designed to improve the solubility, film formation, and optoelectronic properties. We found that solubilizing groups not only enabled uniform solution-processed films but also fine-tuned key properties, such as absorption onset, oxidation potential, and energy levels. Charge transport analysis showed consistently high hole mobilities (∼10 –3 cm 2 /V s) across all substituted derivatives when CuI was used as the hole transport layer, regardless of film morphology. In contrast, electron mobilities tended to be low and inconsistent, partly because of the relatively poor-quality films on the ZnO electron transport layer. Overall, we have shown that solubilizing groups enable film solution-casting and can fine-tune the properties of these near-infrared aza-BODIPY derivatives.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Fast Holes, Slow Electrons, and Medium Control of Polaron Size and Mobility in the DA Polymer F8BT

For this research, the nature of electron and hole polarons on poly(9,9-di-n-hexylfluorenyl-2,7-diyl) (pF) and a copolymer poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,8-diyl)] (F8BT) has been studied by chemical doping, pulse radiolysis, charge modulation spectroscopy, quantum chemical calculations, and microwave conductivity. While pF exhibits very similar behavior in all respects for the electron and the hole, this paper explores the hypothesis that the donor acceptor (push–pull) nature of F8BT will tend to localize charges. Optical spectra and quantum chemical calculations point to an electron localized on the thiadiazole unit in polar liquids but becoming more delocalized as the solvent polarity decreases. Indeed, in the nonpolar solvent benzene, the electron mobility is only 2.7 times lower than that of the hole, which conversely is shown to be delocalized in all environments and has a similar mobility to polarons on the homopolymer polyfluorene. Lastly, advantageous modifications to the optoelectronic properties of conjugated polymers that come about by using alternating donor acceptor repeat units have thus been shown to not significantly hinder charge transport despite the corrugated energy landscape along the backbone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Role of Intradomain Heterogeneity on Ion and Polymer Dynamics in Block Polymer Electrolytes: Investigating Interfacial Mobility and Ion-Specific Dynamics and Transport

Block polymers show promise as solid-state battery electrolytes due to the optimization of conductive and mechanical properties enabled via tuning of block chemistry and length. We investigate a polystyrene-block-poly(oligo-oxyethylene methacrylate) (PS-b-POEM) electrolyte doped with various lithium salts to investigate the role of molecular structure on ion transport properties and on local ion dynamics and associations. Anion charge becomes more delocalized with increasing size, reducing the coupling between salt ions while increasing coupling between ion and polymer chain motions and creating a more mobile overall environment. We observe support for this ion-polymer coupling via 1 H, 7 Li and 19 F NMR spectroscopy, from which we obtain ion-specific mobility transition temperatures that differ from the polymer glass transition temperature. We also note faster transport and weaker local energetic interactions with anion size using temperature-dependent NMR diffusometry. 1 H NMR spectroscopy further elucidates polymer chain dynamics and enables quantification of the temperature-dependent fraction of the conducting block that is immobile near the PS-POEM domain interface. As a result, NMR thus represents a species-specific and timescale-specific platform to quantify phase and interface behavior, and to correlate ion-specific transport with polymer chain dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Record surface state mobility and quantum Hall effect in topological insulator thin films via interface engineering

Material defects remain as the main bottleneck to the progress of topological insulators (TIs). In particular, efforts to achieve thin TI samples with dominant surface transport have always led to increased defects and degraded mobilities, thus making it difficult to probe the quantum regime of the topological surface states. Here, by utilizing a novel buffer layer scheme composed of an In 2 Se 3 /(Bi 0.5 In 0.5 ) 2 Se 3 heterostructure, we introduce a quantum generation of Bi 2 Se 3 films with an order of magnitude enhanced mobilities than before. Furthermore, this scheme has led to the first observation of the quantum Hall effect in Bi 2 Se 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Tailoring Kinetics on a Topological Insulator Surface by Defect-Induced Strain: Pb Mobility on Bi 2 Te 3

Heteroepitaxial structures based on Bi2Te3-type topological insulators (TIs) exhibit exotic quantum phenomena. For optimal characterization of these phenomena, it is desirable to control the interface structure during film growth on such TIs. In this process, adatom mobility is a key factor. We demonstrate that Pb mobility on the Bi2Te3(111) surface can be modified by the engineering local strain, ε, which is induced around the point-like defects intrinsically forming in the Bi2Te3(111) thin film grown on a Si(111)-7 × 7 substrate. Scanning tunneling microscopy observations of Pb adatom and cluster distributions and first-principles density functional theory (DFT) analyses of the adsorption energy and diffusion barrier Ed of Pb adatom on Bi2Te3(111) surface show a significant influence of ε. Surprisingly, Ed reveals a cusp-like dependence on ε due to a bifurcation in the position of the stable adsorption site at the critical tensile strain εc ≈ 0.8%. This constitutes a very different strain-dependence of diffusivity from all previous studies focusing on conventional metal or semiconductor surfaces. Kinetic Monte Carlo simulations of Pb deposition, diffusion, and irreversible aggregation incorporating the DFT results reveal adatom and cluster distributions compatible with our experimental observations.

Chemistry↗
DOE OSTI2024

Reducing Pb and Cl Mobility in Waste-to-Energy Fly Ashes via Chlorellestadite Formation

Sustainably sourced development minerals are vital to meeting the demand for low-carbon construction materials. A potential waste material that can be a low-carbon construction material for cementitious systems is waste-to-energy fly ash (WTE ash), a by-product of waste incineration. WTE ash contains chloride-bearing species and heavy metals, which can promote steel reinforcement corrosion and present long-term leaching risks. Here, we present a new multi-step ash treatment protocol involving dissolution and heating to transform the non-readily removable chlorides in WTE ash to Chlorellestadite (Ca 10 (SiO 4 ) 3 (SO 4 ) 3 Cl 2 ). Our results suggest that this transformation significantly reduces chloride release from WTE ash in an alkaline cement-like environment by over two orders of magnitude, from 1500 mg/l to less than 10 mg/l. This transformation also significantly reduces Pb mobility after treatment (from > 5 mg/l to < 0.5 mg/l), likely caused by the crystallo-chemical incorporation of Pb in Chlorellestadite. In contrast to the existing ash treatment methods, the proposed ash treatment protocol minimizes heavy metals volatilization while simultaneously reducing Pb mobility and chloride release through Chlorellestadite formation. Furthermore, these findings overcome limitations preventing the commercial use of WTE ash and thus opening up pathways towards a circular economy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Role of the Mobile Active Site Flap in IMP Dehydrogenase Inhibitor Binding

Inosine 5′-monophosphate dehydrogenase (IMPDH) is a promising antibiotic target. This enzyme catalyzes the NAD-dependent oxidation of inosine 5′-monophosphate (IMP) to xanthosine 5′-monophosphate (XMP), which is the rate-limiting step in guanine nucleotide biosynthesis. Bacterial IMPDH-specific inhibitors have been developed that bind to the NAD + site. These inhibitors display varied affinities to different bacterial IMPDHs that are not easily rationalized by X-ray crystal structures of enzyme–inhibitor complexes. Inspection of X-ray crystal structures of 25 enzyme–inhibitor complexes, including 10 newly described, suggested that a mobile active site flap may be a structural determinant of inhibitor potency. Saturation transfer difference NMR experiments also suggested that the flap may contact the inhibitors to varying extents in different IMPDHs. Flap residue Leu413 contacted some inhibitors but was not structured in the crystal structures of other inhibitor complexes. The substitution of Leu413 with Phe or Ala in Bacillus anthracis IMPDH had inhibitor-selective effects, suggesting residue 413 could be a structural determinant of affinity. Curiously, the Ala substitution increased the potency of most inhibitors, even those that contacted Leu413 in the crystal structures. Presteady-state and steady-state kinetics experiments showed that the Leu413Ala substitution had comparable effects on inhibitor binding to the noncovalent E·IMP complex and the covalent intermediate E-XMP*, suggesting that the flap had similar interactions in both complexes. These results demonstrate that contacts do not necessarily indicate favorable interactions, and poorly structured mobile regions should not be discounted when assessing binding determinants.

Conformation↗
DOE OSTI2021

Unraveling the Unconventional Order of a High-Mobility Indacenodithiophene-Benzothiadiazole Copolymer

We report a new class of donor–acceptor (D-A) copolymers found to produce high charge carrier mobilities competitive with amorphous silicon (>1 cm 2 V –1 s –1 ) exhibit the puzzling microstructure of substantial local order, however lacking long-range order and crystallinity previously deemed necessary for achieving high mobility. Here, we demonstrate the application of low-dose transmission electron microscopy to image and quantify the nanoscale and mesoscale organization of an archetypal D-A copolymer across areas comparable to electronic devices (≈9 μm 2 ). The local structure is spatially resolved by mapping the backbone (001) spacing reflection, revealing nanocrystallites of aligned polymer chains throughout nearly the entire film. Analysis of the nanoscale structure of its ordered domains suggests significant short- and medium-range order and preferential grain boundary orientations. Moreover, we provide insights into the rich, interconnected mesoscale organization of this new family of D-A copolymers by analysis of the local orientational spatial autocorrelations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Relationship between Mobility and Lattice Strain in Electrochemically Doped Poly(3-hexylthiophene)

Conjugated semiconducting polymers, such as poly(3-hexylthiophene) (P3HT), are poised to play an integral role in the development of organic electronic devices; however, their performance is governed by factors that are intrinsically coupled: dopant concentration, carrier mobility, crystal structure, and mesoscale morphology. We utilize synchrotron X-ray scattering and electrochemical impedance spectroscopy to probe the crystal structure and electronic properties of P3HT in situ during electrochemical doping. We also show that doping strains the crystalline domains, coincident with an exponential increase in hole mobility. We believe these observations provide guidance for the development of improved theoretical models for charge transport in semiconducting polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemically Stable Polyarylether-Based Metallophthalocyanine Frameworks with High Carrier Mobilities for Capacitive Energy Storage

Covalent organic frameworks (COFs) with efficient charge transport and exceptional chemical stability are emerging as an import class of semiconducting materials for opto-/electronic devices and energy-related applications. However, the limited synthetic chemistry to access such materials and the lack of mechanistic understanding of carrier mobility greatly hinder their practical applications. Herein, we report the synthesis of three chemically stable polyarylether-based metallophthalocyanine COFs (PAE-PcM, M = Cu, Ni, and Co) and facile in situ growth of their thin films on various substrates (i.e., SiO 2 /Si, ITO, quartz) under solvothermal conditions. We show that PAE-PcM COFs thin films with van der Waals layered structures exhibit p -type semiconducting properties with the intrinsic mobility up to ~19.4 cm 2 V -1 s -1 and 4 orders of magnitude of increase in conductivity for PAE-PcCu film (0.2 S m -1 ) after iodine doping. Density functional theory calculations reveal that the carrier transport in the framework is anisotropic, with the out-of-plane hole transport along columnar stacked phthalocyanine more favorable. Furthermore, PAE-PcCo shows the redox behavior maximumly contributes ~88.5% of its capacitance performance, giving rise to a high surface area normalized capacitance of ~19 μF cm -2 . Overall, this work not only offers fundamental understandings of electronic properties of polyarylether-based 2D COFs but also paves the way for their energy-related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effects of Temperature Fluctuations on Surface Mobility of Atomic Steps and Oxidation Dynamics in High-Temperature Alloys

In contrast to the traditional perspective that thermal fluctuations are insignificant in surface dynamics, here we report their influence on surface reaction dynamics. Using real-time low-energy electron microscopy imaging of NiAl(100) under both vacuum and O 2 atmospheres, we demonstrate that transient temperature variations substantially alter the direction of atom diffusion between the surface and bulk, leading to markedly different oxidation outcomes. During heating, substantial outward diffusion of atoms from the bulk to the surface results in step growth. Conversely, cooling induces considerable inward diffusion of adatoms, producing a distinct oxide morphology. In both scenarios, initially formed oxide islands impede local atomic step mobility, thereby increasing step length due to mass transfer between the surface and bulk, with atomic steps acting as adatom sinks during heating and sources during cooling. Furthermore, we show that this pinning effect on atomic step mobility can be mitigated by applying persistent temperature fluctuations. As a result, understanding these nuances is vital for accurately predicting and dynamically manipulating the performance of active materials in various chemical processes under transient thermal conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Ultrafast Bulk Diffusion of AlHxin High-Entropy Dehydrogenation Intermediates of NaAlH4

Using first-principles molecular dynamics (FPMD) and total-energy calculations, we demonstrate low-barrier bulk diffusion of Al-bearing species in γ-NaAlH4, a recently proposed high-entropy polymorph of NaAlH4. For charged AlH4– and neutral AlH3 vacancies, the computed barriers for diffusion are <0.1 eV, and we directly observe the predicted diffusive pathways in FPMD simulations at picosecond time scales. In contrast, such diffusion in the α phase is inaccessible to FPMD, consistent with much higher barriers. The transport behavior of γ-NaAlH4, in addition to key dynamical and structural signatures, is consistent with experimental observations of high-mobility species, strongly supporting the idea that an intermediate transition from the α phase to a high-entropy polymorph facilitates the hydrogen-releasing decomposition of NaAlH4. Our results provide an answer to longstanding questions regarding the responsible agent for the experimentally observed efficient Al transport during dehydrogenation and suggest that mass transport and phase transformation kinetics are coupled. Implications for understanding the (de)hydrogenation of undoped and catalyzed NaAlH4 are discussed.

36 MATERIALS SCIENCE↗