Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MarCo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

A proper assessment of TEM diffraction patterns originating from CrN nitrides in a ferritic matrix

Highlights: • A proper assessment of TEM diffraction pattern along the [001]{sub α-Fe} of a nitrided Fe-Cr alloy is proposed • Diffraction pattern results from the diffraction of the ferritic matrix and the three nitrides variants • Thin foil’s thickness plays a key role in the obtained diffraction pattern • Relrods located in the first layer of the reciprocal lattice can provide extra reflections in the diffraction patterns - Abstract: Upon nitriding of a Fe-3%Cr alloy at 550 °C during 48 h at a nitriding potential K{sub N} = 5 atm{sup −1/2}, finely dispersed CrN grains precipitate. Considering that the nitrides developing within the nitrided layer adopt a cubic, rock-salt structure, Transmission Electron Microscopy (TEM) investigations revealed the Bain orientation relationships (also called Baker-Nutting) existing between the matrix and the precipitates. Given the latter and the structures of both ferrite (bcc) and nitrides (fcc), we have shown that group theory predicts the existence of three nitrides variants, orthogonal to each other, developing in ferrite along the <001>{sub α-Fe} directions, which is in agreement with our experimental observations. The nitrides adopt a very thin platelet-like morphology, energetically corresponding to an absolute extremum. Diffraction patterns obtained along the [001]{sub α-Fe} result from the simultaneous diffraction of the ferritic matrix and the three nitrides variants. The platelet-like nitride precipitates give birth to diffuse intensity lines, originating from the two families developing along the (100) and (010) ferrite planes, as well as possible appearance of additional reflections, located at the forbidden positions {100}{sub α-Fe} and {110}{sub CrN} of the remaining variant, driving the interpretation of such diffraction patterns complicated. Foil thickness has proven to play a key role in the occurrence of this phenomenon. When the geometric diffraction conditions are favorable (i.e. very thin foil along the zone axis and very fine precipitates platelets), TEM analysis permitted to attribute these extra reflections to the nodes located in the first layer of the third variant's reciprocal space.

36 MATERIALS SCIENCE↗

Non-destructive compositional and microstructural characterization of Sardinian Bronze Age swords through Neutron Diffraction

Highlights: • Determination of the manufacturing technique of some “Sa Idda” swords • New data on their provenience • Determination of: alloy composition, dendritic segregation, mineralization phase - Abstract: The Monte Sa Idda type swords belong to a well characterized typological class, whose origin has long been debated and seems to coincide with the Iberian Peninsula. The name comes from the site of the first discovery of a hoard containing this type of swords, among other bronze artefacts, namely Monte Sa Idda, Decimoputzu-Cagliari, Italy. The swords were produced through fusion inside a casting mould. Such kind of casting mould has not been found in Sardinia, and this may suggests that finished objects were either imported or made using clay or sand casting mould. Moreover, the discovery of these types of sword, in hoards and in votive deposits, raises the problem of their functional use. It is unknown if the blades were intended to be used as weapons, and therefore subjected to cold working necessary for thinning and sharpening of the blade, or as ceremonial objects. In order to answer to these questions, a neutron diffraction experiment was performed on three swords belonging to the Monte Sa Idda type. The results obtained are presented and discussed in the paper.

36 MATERIALS SCIENCE↗

Impact of forging direction on the recrystallization behaviour of nickel base superalloy AD730 billet material at subsolvus temperatures

Highlights: • Large unrecrystallized grains present a fine distribution of intragranular γ′ precipitates; • Intragranular precipitates play a key role on strain distribution and subsequent recrystallization behaviour for AD730; • Continuous dynamic recrystallization (CDRX) promotes the gradual consumption of large unrecrystallized grains. • Undissolved secondary precipitates play a key role on the microstructural evolution of AD730 • No significant effect associated to the forging direction on the recrystallization behaviour of AD730 was found. AD730™ is a newly developed Ni-based superalloy for turbine disk applications produced by cast and wrought processes. Conventional ingot-to-billet conversion is an expensive and very complex operation. Because of the difficulties to achieve a uniform strain for recrystallization, large unrecrystallized grains are retained along this process. Heterogeneities of grain size have a negative impact on subsequent forging processes as well as ultrasonic inspectability of the destination part. The main aim of this work is to analyse the impact of both forging direction (billet, cogging) and strain (ε = 0.3–2) on the microstructural evolution of AD730 at subsolvus temperatures from a semi-finished product (billet) under conditions representative of both cogging and hot forging operations. Special attention to the presence of large unrecrystallized grains was paid. Double truncated cones (DTCs) were hot forged at subsolvus temperatures followed by air cooling. SEM and EBSD analysis were conducted in the as-received (billet) and the as-forged conditions. AD730 alloy presents a complex microstructure characterized by the presence of large unrecrystallized grains, aligned in the billet direction, with remarkable differences in γ′ precipitates distribution as compared to recrystallized structures. The fine distribution of primary γ′ precipitates (pinning effect) plays a key role on grain size control but also on the recrystallization behaviour. Continuous dynamic recrystallization (CDRX) mechanism was found to be operating in the large unrecrystallized grains, promoting the formation intragranular DRX grains and the gradual recrystallization of these grains. Strain presents a strong effect on the microstructural evolution of AD730, increasing the recrystallization fraction and refining the structure. By contrast, no significant effect associated to the forging direction was found. Conditions representative of cogging operations (ε ≤ 0.6) at subsolvus temperatures were translated into large fractions of unrecrystallized structures (strain accumulation).

36 MATERIALS SCIENCE↗

Effect of LPBF Processing Parameters on Inconel 718 Lattice Structures: Geometrical Characteristics, Surface Morphology, and Mechanical Properties

Laser Powder Bed Fusion (LPBF) enables the additive manufacturing of complex lattice structures. However, the fabrication of lattice structures via LPBF poses challenges in achieving the intended geometrical accuracy due to their inherent complexity. This study investigates the effects of LPBF processing parameters, specifically laser power and scanning speed, on the geometrical characteristics, surface quality, and mechanical behavior of Inconel 718 lattices structures. The results reveal that processing parameters required for the fabrication of near-full dense structures do not translate effectively to lattice configurations, as variations in energy input influence lattice geometry and surface quality. In this work, strut thickness, open-pore size, open-cell porosity, and surface roughness were measured, and the mechanical properties of the lattices were evaluated under shear loading. The findings indicate that lower energy inputs, achieved by reducing laser power and increasing scanning speed, yield porous structures but lead to mechanical degradation. In contrast, high energy inputs lead to lattices with enhanced strength but result in undesirable open-pore blockage and dimensional inaccuracies. These findings provide insights into tailoring LPBF parameters for dimensional accuracy in lattices and correlating the processing parameters to mechanical performance and surface roughness.

36 MATERIALS SCIENCE↗

Multi-objective automatic discovery of optimized metamaterials for varying velocity impact protection

Mechanical metamaterials have demonstrated exceptional impact performance while remaining lightweight. Impact resistance has traditionally been investigated using quasi-static simulations, often with the assumption that performance will translate to high-velocity impact scenarios. However, critical crash protection parameters—such as peak stress and absorbed energy—are highly sensitive to impact velocity, leading to inconsistent performance under dynamic loading. To address this, we introduce a strain-rate-aware, active deep learning framework that enables multi-objective optimization of impact protection metrics across a wide range of impact velocities. Our framework captures the strain-rate sensitivity of architected lattices by learning to control spatial gradation in cellular metamaterials, resulting in over 200 % enhancement in impact protection relative to state-of-the-art designs such as Voronoi and re-entrant lattices. We demonstrate its practical utility by designing next-generation lattice structures for automotive bumper systems that satisfy multiple, velocity-specific safety criteria—capabilities beyond those of conventional designs. More than just a predictive tool, this framework marks the first step towards enabling adaptable impact-resistant structures across dynamic regimes.

Deep learning↗

Adsorption and electropolymerization of toluidine blue on the nanostructured octakis(hydridodimethylsiloxy)octasilsesquioxane surface

Toluidine blue O (TBO) was adsorbed on the octakis(hydridodimethylsiloxy)octasilsesquioxane (Q{sub 8}M{sub 8}{sup H}) surface. The characterization of the precursor (Q{sub 8}M{sub 8}{sup H}) and resulting materials obtained by the reaction of Q{sub 8}M{sub 8}{sup H} and toluidine blue (CTBO) were defined using Fourier transform infrared spectra, nuclear magnetic resonance solid-state {sup 13}C and Si{sup 29} magic angle spinning. The electrochemical polymerization in a glassy carbon electrode was verified by means of a film silsesquioxane formation (FCTBO) using cyclic voltammetry in a potential range of -0.5 to 1.3 V (vs. saturated calomel electrode (SCE)) in a Britton Robinson (B-R) buffer solution (pH 2.0). The cyclic voltammogram of the film exhibits two redox couples with a formal potential of -0.15 and -0.02 V (B-R buffer pH 5). The formal potential shifts linearly in the cathodic direction by increasing the pH solution with a slope of 71 and 57 mV per unit for the first and second couple, respectively. The film was electrochemically very stable.

36 MATERIALS SCIENCE↗

Synthesis and characterisation of the n = 2 Ruddlesden–Popper phases Ln{sub 2}Sr(Ba)Fe{sub 2}O{sub 7} (Ln = La, Nd, Eu)

Graphical abstract: - Highlights: • Some Ruddlesden–Popper phases have been characterised. • Substitution on the A site influences cationic order. • The magnetic moment redirects with temperature - Abstract: A series of n = 2 Ruddlesden–Popper phases A{sub 2}B{sub 2}O{sub 7} of composition Ln{sub 2}Sr(Ba)Fe{sub 2}O{sub 7} (Ln = La, Nd, Eu) have been prepared. La{sub 2}SrFe{sub 2}O{sub 7} and La{sub 2}BaFe{sub 2}O{sub 7} crystallise in the tetragonal space group I4/mmm. The structures of Eu{sub 2}SrFe{sub 2}O{sub 7} and Nd{sub 2}SrFe{sub 2}O{sub 7} are best described in space group P4{sub 2}/mnm. Substitution on the A site with smaller lanthanide- and larger alkaline metal- ions leads to enhanced cationic order in these phases and reflects increasing differences in cationic radii. All the compounds are antiferromagnetically ordered between 298 and 2 K. In La{sub 2}SrFe{sub 2}O{sub 7} the magnetic moment lies along [1 1 0] at all temperatures between 298 and 2 K whereas in La{sub 2}BaFe{sub 2}O{sub 7} the magnetic moment at 298 K lies along the crystallographic x-axis but redirects from the [1 0 0] to the [1 1 0] direction between 210 and 190 K and is retained in this direction until 2 K. In Nd{sub 2}SrFe{sub 2}O{sub 7} the magnetic moment at 298 K lies along [1 1 0] but rotates from [1 1 0] to [0 0 1] between 17 and 9 K. A series of {sup 57}Fe Mössbauer spectra recorded from La{sub 2}SrFe{sub 2}O{sub 7} between 290 and 600 K indicate a magnetic ordering temperature of T{sub N} ≥ 535 K.

36 MATERIALS SCIENCE↗

Annealing dynamics of WO{sub 3} by in situ XRD

Highlights: • Flame-made WO{sub 3} nanoparticles with closely controlled crystal and grain size. • Dynamic phase transition of annealing of pure and Si-doped WO{sub 3} by in situ XRD. • Irreversible evolution of WO{sub 3} crystallinity by heating/cooling during its annealing. • Si-doping alters the WO{sub 3} crystallinity dynamics and stabilizes nanosized WO{sub 3}. • Flame-made nano-WO{sub 3} can sense NO at the ppb level. - Abstract: Tungsten trioxide is a semiconductor with distinct applications in gas sensors, catalysis, batteries and pigments. As such the transition between its different crystal structures during its annealing are of interest, especially for sensor applications. Here, WO{sub 3} nanoparticles with closely controlled crystal and grain size (9–15 nm) and phase composition are made by flame spray pyrolysis and the formation of different WO{sub 3} phases during annealing is investigated. Most notably, the dynamic phase transition and crystal size evolution of WO{sub 3} during heating and cooling is monitored by in situ X-ray diffraction revealing how metastable WO{sub 3} phases can be captured stably. The effect of Si-doping is studied since it is used in practise to control crystal growth and phase transition during metal oxide synthesis and processing. Finally the influence of annealing on the WO{sub 3} sensing performance of NO, a lung inflammation tracer in the human breath, is explored at the ppb-level.

36 MATERIALS SCIENCE↗

The local structure of 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 from neutron total scattering measurements and multi-edge X-ray absorption analysis

Neutron total scattering measurements and multi-edge X-ray absorption analysis were performed on a 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 powder sample. The TiIII-II edges showed that titanium is distorted in the rhombohedral [111] direction (in a BaTiO 3 -like chemical and bonding environment). Extended X-ray fine structure analysis (EXAFS) was performed on the zirconium K-edge and it was found that zirconium resides in the center of the ZrO 6 octahedra in cubic symmetry. Furthermore, the local structure was initially modelled with the orthorhombic Amm2 space group with unsatisfactory results. To better model the local structure, the results from the EXAFS analysis were incorporated into the small-box pair distribution function (PDF) refinements and the best fit of the observed data was a combination of barium calcium titanate (BCT) and barium calcium zirconate (BCZ) phases.

36 MATERIALS SCIENCE↗

Location and characterization of heterogeneous phases within Mary Rose wood

Preserving the Mary Rose oak hull for future generations is a major challenge due to the highly heterogeneous nature of waterlogged wooden artifacts, which contain polycrystalline, amorphous, and nanostructured materials that test traditional characterization methods. Effective conservation requires detailed knowledge of the distribution and chemical nature of these species to develop strategies for preventing multiple chemo-mechanical degradation pathways. Here, we apply synchrotron-based computed tomography total scattering methods to the Mary Rose keelson wood that provides valuable position-resolved structural information on multiple embedded species of different length and concentration scales. We identify 5 nm zinc sulfide nanoparticles in the wood, presumably deposits from bacteria operating on the sulfur energy cycle under the anaerobic conditions on the seabed. These are identified as precursors to acid attack on the wood upon removal to an aerobic environment. These insights inform not only next-generation conservation strategies, but also the efficacy and unforeseen issues of previous treatments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preoperative Radiation Treatment for Rectal Cancer: Comparison of Target Coverage and Small Bowel NTCP in Conventional vs. 3D-Conformal Planning

A prospective study was undertaken to evaluate the improvement in rectal cancer radiation treatment achieved with the implementation of target delineation for conformal radiotherapy, replacing conventional technique using standard radiological anatomy for target volume definition. In 10 patients receiving preoperative pelvic irradiation for rectal cancer, a 3-field technique was designed by a 3-dimensional (3D) planning system. Two plans were simulated for each patient, one with the fields designed in the conventional way based on radiological anatomy, and the other with the fields designed on the basis of a computed tomography (CT) delineated planning target volume (PTV). A total dose of 45 Gy in 25-daily fractions of 1.8 Gy in 5 weeks was planned. Dose-volume histograms (DVHs) of PTV, small bowel, anal sphincter, and urinary bladder were analyzed to compare plans. The minimum, maximum, and mean dose in the PTV and in critical organs were also evaluated. The inhomogeneity coefficient (IC) and the target coverage (TC) were calculated. The normal tissue complication probability (NTCP) for each organ at risk (OAR) was determined. NTCP for small bowel and urinary bladder was not statistically different, while the PTV coverage was significantly lower with conventional treatment relative to conformal treatment (median IC = 7.2, median TC = 0.91 vs. median IC = 0.14 and median TC = 1, p < 0.005). The 3D conformal treatment plan in preoperative radiotherapy for rectal cancer improves target coverage without significantly affecting small bowel and urinary bladder NTCP.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Preliminary Studies for a CBCT Imaging Protocol for Offline Organ Motion Analysis: Registration Software Validation and CTDI Measurements

Cone-beam X-ray volumetric imaging in the treatment room, allows online correction of set-up errors and offline assessment of residual set-up errors and organ motion. In this study the registration algorithm of the X-ray volume imaging software (XVI, Elekta, Crawley, United Kingdom), which manages a commercial cone-beam computed tomography (CBCT)-based positioning system, has been tested using a homemade and an anthropomorphic phantom to: (1) assess its performance in detecting known translational and rotational set-up errors and (2) transfer the transformation matrix of its registrations into a commercial treatment planning system (TPS) for offline organ motion analysis. Furthermore, CBCT dose index has been measured for a particular site (prostate: 120 kV, 1028.8 mAs, approximately 640 frames) using a standard Perspex cylindrical body phantom (diameter 32 cm, length 15 cm) and a 10-cm-long pencil ionization chamber. We have found that known displacements were correctly calculated by the registration software to within 1.3 mm and 0.4{sup o}. For the anthropomorphic phantom, only translational displacements have been considered. Both studies have shown errors within the intrinsic uncertainty of our system for translational displacements (estimated as 0.87 mm) and rotational displacements (estimated as 0.22{sup o}). The resulting table translations proposed by the system to correct the displacements were also checked with portal images and found to place the isocenter of the plan on the linac isocenter within an error of 1 mm, which is the dimension of the spherical lead marker inserted at the center of the homemade phantom. The registration matrix translated into the TPS image fusion module correctly reproduced the alignment between planning CT scans and CBCT scans. Finally, measurements on the CBCT dose index indicate that CBCT acquisition delivers less dose than conventional CT scans and electronic portal imaging device portals. The registration software was found to be accurate, and its registration matrix can be easily translated into the TPS and a low dose is delivered to the patient during image acquisition. These results can help in designing imaging protocols for offline evaluations.

61 RADIATION PROTECTION AND DOSIMETRY↗

Compensation of Missed Fractions Without Knowledge of Radiobiological Parameters

The purpose of this work was to develop simple formulas that can be used to estimate the biologic effect of missed radiotherapy fractions independently of radiobiological parameters. This is achieved by expressing the limits in biologically effective dose for very low or very high radiobiological parameter ratios. Worked examples are given.

61 RADIATION PROTECTION AND DOSIMETRY↗

Advances in the implementation of helical tomotherapy-based total marrow irradiation with a novel field junction technique

Given the limitations in the travel ability of the helical tomotherapy (HT) couch, total marrow irradiation (TMI) has to be split in 2 segments, with the lower limbs treated with feet first orientation. The aim of this work is to present a planning technique useful to reduce the dose inhomogeneity resulting from the matching of the 2 helical dose distributions. Three HT plans were generated for each of the 18 patients enrolled. Upper TMI (UTMI) and lower TMI (LTMI) were planned onto the whole-body computed tomography (CT) and on the lower-limb CT, respectively. A twin lower TMI plan (tLTMI) was designed on the whole-body CT. Agreement between LTMI and tLTMI plans was assessed by computing for each dose-volume histogram (DVH) structure the {gamma} index scored with 1% of dose and volume difference thresholds. UTMI and tLTMI plans were summed together on the whole-body CT, enabling the evaluation of dose inhomogeneity. Moreover, a couple of transition volumes were used to improve the dose uniformity in the abutment region. For every DVH, a number of points >99% passed the {gamma} analysis, validating the method used to generate the twin plan. The planned dose inhomogeneity at the junction level resulted within {+-}10% of the prescribed dose. Median dose reduction to organs at risk ranged from 30-80% of the prescribed dose. Mean conformity index was 1.41 (range 1.36-1.44) for the whole-body target. The technique provided a 'full helical' dose distribution for TMI treatments, which can be considered effective only if the dose agreement between LTMI and tLTMI plans is met. The planning of TMI with HT for the whole body with adequate dose homogeneity and conformity was shown to be feasible.

61 RADIATION PROTECTION AND DOSIMETRY↗

Applicator-guided volumetric-modulated arc therapy for low-risk endometrial cancer

The aim of this study was to report the feasibility of volumetric-modulated arc therapy (VMAT) in the postoperative irradiation of the vaginal vault. Moreover, the VMAT technique was compared with 3D conformal radiotherapy (3D-CRT) and fixed-field intensity-modulated radiotherapy (IMRT), in terms of target coverage and organs at risk sparing. The number of monitor units and the delivery time were analyzed to score the treatment efficiency. All plans were verified in a dedicated solid water phantom using a 2D array of ionization chambers. Twelve patients with endometrial carcinoma who underwent radical hystero-adenexectomy and fixed-field IMRT treatments were retrospectively included in this analysis; for each patient, plans were compared in terms of dose-volume histograms, homogeneity index, and conformity indexes. All techniques met the prescription goal for planning target volume coverage, with VMAT showing the highest level of conformity at all dose levels. VMAT resulted in significant reduction of rectal and bladder volumes irradiated at all dose levels compared with 3D-CRT. No significant differences were found with respect to IMRT. Moreover, a significant improvement of the dose conformity was reached by VMAT technique not only at the 95% dose level (0.74 vs. 0.67 and 0.62) but also at 50% and 75% levels of dose prescription. In addition, VMAT plans showed a significant reduction of monitor units by nearly 28% with respect to IMRT, and reduced treatment time from 11 to <3 minutes for a single 6-Gy fraction. In conclusion, VMAT plans can be planned and carried out with high quality and efficiency for the irradiation of vaginal vault alone, providing similar or better sparing of organs at risk to fixed-field IMRT and resulting in the most efficient treatment option. VMAT is currently our standard approach for radiotherapy of low-risk endometrial cancer.

61 RADIATION PROTECTION AND DOSIMETRY↗