Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC INSULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Vortices, skyrmions, and chirality waves in frustrated Mott insulators with a quenched periodic array of impurities

Finite-Q magnetic instabilities are rather common in frustrated magnets. When the magnetic susceptibility is maximized at multiple-Q vectors related through lattice symmetry operations, exotic magnetic orderings such as vortex and skyrmion crystals may follow. Here, we show that a periodic array of nonmagnetic impurities, which can be realized through charge density wave ordering, leads to a rich phase diagram featuring a plethora of chiral magnetic phases, especially when there is a simple relation between the reciprocal vectors of the impurity superlattice and the magnetic Q vectors. We also investigate the effect of changing the impurity concentration or disturbing the impurity array with small quenched randomness. Lastly, alternative realizations of impurity superlattices are briefly discussed.

36 MATERIALS SCIENCE↗

Three-dimensional quantum Hall effect and metal–insulator transition in ZrTe 5

The discovery of the quantum Hall effect (QHE) in two-dimensional electronic systems has given topology a central role in condensed matter physics. Although the possibility of generalizing the QHE to three-dimensional (3D) electronic systems was proposed decades ago, it has not been demonstrated experimentally. Here we report the experimental realization of the 3D QHE in bulk zirconium pentatelluride (ZrTe 5 ) crystals. We perform low-temperature electric-transport measurements on bulk ZrTe 5 crystals under a magnetic field and achieve the extreme quantum limit, where only the lowest Landau level is occupied, at relatively low magnetic fields. In this regime, we observe a dissipationless longitudinal resistivity close to zero, accompanied by a well-developed Hall resistivity plateau proportional to half of the Fermi wavelength along the field direction. This response is the signature of the 3D QHE and strongly suggests a Fermi surface instability driven by enhanced interaction effects in the extreme quantum limit. By further increasing the magnetic field, both the longitudinal and Hall resistivity increase considerably and display a metal–insulator transition, which represents another magnetic-field-driven quantum phase transition. Lastly, our findings provide experimental evidence of the 3D QHE and a promising platform for further exploration of exotic quantum phases and transitions in 3D systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromechanical Properties of 1-mm-Wide Superconducting Cables Comprised of Exfoliated YBCO Filaments

Development of multifilament YBCO cables is an important step toward the manufacture of practical superconducting magnets based on second generation high-temperature superconductor technology. Currently, magnets manufactured from wide 2G tapes suffer from high magnetization loss and poor reliability. The presence of an insulation substrate is to insulate YBCO layers from each other, which allows only lateral (along the tape face) current sharing. Here we present an exfoliated multilayer cable with electrically coupled (1 mm wide) filaments that permit normal (across the tape) current sharing within the cable. Finally, this development can potentially enable fast ramping and stable high-field magnets for applications in fusion, energy storage, and transportation.

2G conductor↗

Magnetic Structure and Spin Fluctuation in Colossal Magnetoresistance Ferrimagnet Mn 3 Si 2 Te 6

The ferrimagnetic insulator Mn 3 Si 2 Te 6 , which features a Curie temperature T c at 78 K and a delicate yet consequential magnetic frustration, exhibits colossal magnetoresistance (CMR) when the magnetic field is applied along the magnetic hard axis, surprisingly inconsistent with existing precedents [Y. Ni, H. Zhao, Y. Zhang, B. Hu, I. Kimchi, and G. Cao, Phys. Rev. B 103, L161105 (2021)]. This discovery motivates a thorough single-crystal neutron diffraction study in order to gain insights into the magnetic structure and its hidden correlation with the new type of CMR. Here we report a noncollinear magnetic structure below the T c where the moments lie predominantly within the basal plane but tilt toward the c axis by ≈10° at ambient conditions. A substantial magnetic diffuse scattering decays slowly and persists well above the T c . The evolution of the spin correlation lengths agrees well with the electrical resistivity, underscoring the role of spin fluctuation contributing to the magnetoresistivity near the transition. Further, application of magnetic field along the c axis renders a swift occurrence of CMR but only a slow tilting of the magnetic moments toward the c axis. The unparalleled changes indicate a nonconsequential role of magnetic polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The analysis and measurement of composite coil properties of Jefferson Lab's super high momentum spectrometer (SHMS) superconducting magnet coils

Jefferson Lab's 11 GeV/c Super High Momentum Spectrometer's superconducting cosine(2theta) quadrupole magnets and the cosine(theta) dipole use a Nb-Ti, 36-strand Rutherford style cable wave-solder to a copper extruded substrate as their conductor. These magnets will operate at 4.4 K. Accurate analysis of the mechanical performance of the magnets under Lorentz forces and thermal stresses requires that the composite coil's physical properties at cryogenic temperatures be known. The composite coil design details including the geometry, components, epoxy glass, and its electrical insulation will be presented. The derivation of the composite coil's calculated physical properties values, using a mixing rule and by Finite Element Analysis (FEA) modeling of a sample coil will be given. The calculated values will be compared to recent measured values of representative samples of the composite coils. Comparison of the composite built up coil sample, measurements and calculated values will be discussed

36 MATERIALS SCIENCE↗

Orthogonal magnetization and symmetry breaking in pyrochlore iridate Eu 2 Ir 2 O 7

We present that electrons in the pyrochlore iridates experience a large interaction energy in addition to a strong spin–orbit interaction. Both features make the iridates promising for realizing novel states such as the topological Mott insulator. The pyrochlore iridate Eu 2 Ir 2 O 7 shows a metal–insulator transition at T N ~ 120 K below which a magnetically ordered state develops. Using torque magnetometry, we uncover an unusual magnetic response. A magnetic field H applied in its a–b plane produces a nonlinear magnetization M ⊥ orthogonal to the plane. M ⊥ displays a d-wave field-angle pattern consistent with octupolar order, with a handedness dictated by field cooling, leading to symmetry breaking of the chirality ω. Lastlyl, a surprise is that the lobe orientation of the d-wave pattern is sensitive to the direction of the field when the sample is field-cooled below T N , suggestive of an additional order parameter η already present at 300 K.

36 MATERIALS SCIENCE↗

Charge Conservation beyond Uniformity: Spatially Inhomogeneous Electromagnetic Response in Periodic Solids

Nonlinear electromagnetic response functions have reemerged as a crucial tool for studying quantum materials, due to recently appreciated connections between optical response functions, quantum geometry, and band topology. Most attention has been paid to responses to spatially uniform electric fields, relevant to low-energy optical experiments in conventional solid state materials. However, magnetic and magnetoelectric phenomena are naturally connected by responses to spatially varying electric fields due to Maxwell’s equations. Furthermore, in the emerging field of moiré materials, characteristic lattice scales are much longer, allowing spatial variation of optical electric fields to potentially have a measurable effect in experiments. In order to address these issues, we develop a formalism for computing linear and nonlinear responses to spatially inhomogeneous electromagnetic fields. Starting with the continuity equation, we derive an expression for the second-quantized current operator that is manifestly conserved and model independent. Crucially, our formalism makes no assumptions on the form of the microscopic Hamiltonian and so is applicable to model Hamiltonians derived from tight-binding or calculations. We then develop a diagrammatic Kubo formalism for computing the wave vector dependence of linear and nonlinear conductivities, using Ward identities to fix the value of the diamagnetic current order by order in the vector potential. We apply our formula to compute the magnitude of the Kerr effect at oblique incidence for a model of a moiré-Chern insulator and demonstrate the experimental relevance of spatially inhomogeneous fields in these systems. We further show how our formalism allows us to compute the (orbital) magnetic multipole moments and magnetic susceptibilities in insulators. Turning to nonlinear response, we use our formalism to compute the second-order transverse response to spatially varying transverse electric fields in our moiré-Chern insulator model, with an eye toward the next generation of experiments in these systems. Published by the American Physical Society 2024

Physics↗

Interface magnetism of Co{sub 2}FeGe Heusler alloy layers and magnetoresistance of Co{sub 2}FeGe/MgO/Fe magnetic tunnel junctions

The interface magnetism between Co{sub 2}FeGe Heusler alloy layers and MgO layers was investigated using {sup 57}Fe Mössbauer spectroscopy. Interface-sensitive samples, where the {sup 57}Fe isotope was used only for the interfacial atomic layer of the Co{sub 2}FeGe layer on the MgO layer, were prepared using atomically controlled alternate deposition. The {sup 57}Fe Mössbauer spectra of the interface-sensitive samples at room temperature were found similar to those of the bulk-sensitive Co{sub 2}FeGe films in which the {sup 57}Fe isotope was distributed throughout the films. On the other hand, the tunnel magnetoresistance effect of magnetic tunnel junctions with Co{sub 2}FeGe layers as the ferromagnetic electrodes showed strong reduction at room temperature. These results indicate that the strong temperature dependence of the tunneling magnetoresistance of magnetic tunnel junctions using Heusler alloy electrodes cannot be attributed simply to the reduction of the magnetization at the interfaces between the Heusler alloy and insulator layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critical behavior at a dynamic vortex insulator-to-metal transition

An array of superconducting islands placed on a normal metal film offers a tunable realization of nanopatterned superconductivity. This system enables elucidating open questions concerning the nature of competing vortex states and phase transitions between them. A square array creates the egg crate potential in which magnetic field-induced vortices are frozen into a vortex insulator. We observe a vortex insulator-to-vortex metal transition driven by the applied electric current and determine critical exponents strikingly coinciding with those for thermodynamic liquid-gas transition. Lastly, our findings offer a comprehensive description of dynamic critical behavior and establish a deep connection between equilibrium and nonequilibrium phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of disorder on the charge-carrier dynamics in {kappa}-(D{<_8}-ET){<_2}Cu[N(CN){<_2}]Br.

We have applied resistance fluctuation spectroscopy to study the intrinsic low-frequency dynamics of the charge carriers in the system {kappa}-(D{sub 8}-ET){sub 2}Cu[N(CN){sub 2}]Br for two different cooling rates. A strong increase of both the resistance and the noise level is observed below the thermodynamic glass-transition temperature T{sub g}. Surprisingly, the data of the normalized spectral weight <({delta}R){sup 2}>/R{sup 2} fall on top of each other for both cooling rates except for temperatures near the Mott critical point (T{sub 0} {approx_equal} 35 K) and below 28 K. The suppression of the peak in <({delta}R){sup 2}>/R{sup 2} associated with the Mott transition suggests that disorder is an additional parameter in the generalized phase diagram. The enhanced noise level below 28 K might be explained by a disorder-induced staggered magnetic moment in the metallic state close to the antiferromagnetic Mott insulator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Doping dependence of the magnetic excitations in La 2 - x Sr x CuO 4

The magnetic correlations within the cuprates have undergone intense scrutiny as part of efforts to understand high-temperature superconductivity. We explore the evolution of the magnetic correlations along the nodal direction of the Brillouin zone in La 2–x Sr x CuO 4 , spanning the doping phase diagram from the antiferromagnetic Mott insulator at x = 0 to the metallic phase at x = 0.26. Magnetic excitations along this direction are found to be systematically softened and broadened with doping, at a higher rate than the excitations along the antinodal direction. This phenomenology is discussed in terms of the nature of the magnetism in the doped cuprates. As a result, survival of the high-energy magnetic excitations, even in the overdoped regime, indicates that these excitations are marginal to pairing, while the influence of the low-energy excitations remains ambiguous.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling Unconventional Superconductivity at the Crossover between Strong and Weak Electronic Interactions

High-temperature superconductivity emerges in many different quantum materials, often in regions of the phase diagram where the electronic kinetic energy is comparable to the electron-electron repulsion. Describing such intermediate-coupling regimes has proven challenging as standard perturbative approaches are inapplicable. In this study, we employ quantum Monte Carlo methods to solve a multiband Hubbard model that does not suffer from the sign problem and in which only repulsive interband interactions are present. In contrast to previous sign-problem-free studies, we treat magnetic, superconducting, and charge degrees of freedom on an equal footing. We find an antiferromagnetic dome accompanied by a metal-to-insulator crossover line in the intermediate-coupling regime, with a smaller superconducting dome appearing in the metallic region. Across the antiferromagnetic dome, the magnetic fluctuations change from overdamped in the metallic region to propagating in the insulating region. Our findings shed new light on the intertwining between superconductivity, magnetism, and charge correlations in quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A hybrid magnetic/complementary metal oxide semiconductor three-context memory bit cell for non-volatile circuit design

After decades of continued scaling to the beat of Moore's law, it now appears that conventional silicon based devices are approaching their physical limits. In today's deep-submicron nodes, a number of short-channel and quantum effects are emerging that affect the manufacturing process, as well as, the functionality of the microelectronic systems-on-chip. Spintronics devices that exploit both the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, are promising solutions to circumvent these scaling threats. Being compatible with the CMOS technology, such devices offer a promising synergy of radiation immunity, infinite endurance, non-volatility, increased density, etc. In this paper, we present a hybrid (magnetic/CMOS) cell that is able to store and process data both electrically and magnetically. The cell is based on perpendicular spin-transfer torque magnetic tunnel junctions (STT-MTJs) and is suitable for use in magnetic random access memories and reprogrammable computing (non-volatile registers, processor cache memories, magnetic field-programmable gate arrays, etc). To demonstrate the potential our hybrid cell, we physically implemented a small hybrid memory block using 45 nm × 45 nm round MTJs for the magnetic part and 28 nm fully depleted silicon on insulator (FD-SOI) technology for the CMOS part. We also report the cells measured performances in terms of area, robustness, read/write speed and energy consumption.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Overhauser effects in insulating solids

We report magic angle spinning, dynamic nuclear polarization (DNP) experiments at magnetic fields of 9.4 T, 14.1 T, and 18.8 T using the narrow line polarizing agents 1,3-bisdiphenylene-2-phenylallyl (BDPA) dispersed in polystyrene, and sulfonated-BDPA (SA-BDPA) and trityl OX063 in glassy glycerol/water matrices. The {sup 1}H DNP enhancement field profiles of the BDPA radicals exhibit a significant DNP Overhauser effect (OE) as well as a solid effect (SE) despite the fact that these samples are insulating solids. In contrast, trityl exhibits only a SE enhancement. Data suggest that the appearance of the OE is due to rather strong electron-nuclear hyperfine couplings present in BDPA and SA-BDPA, which are absent in trityl and perdeuterated BDPA (d{sub 21}-BDPA). In addition, and in contrast to other DNP mechanisms such as the solid effect or cross effect, the experimental data suggest that the OE in non-conducting solids scales favorably with magnetic field, increasing in magnitude in going from 5 T, to 9.4 T, to 14.1 T, and to 18.8 T. Simulations using a model two spin system consisting of an electron hyperfine coupled to a {sup 1}H reproduce the essential features of the field profiles and indicate that the OE in these samples originates from the zero and double quantum cross relaxation induced by fluctuating hyperfine interactions between the intramolecular delocalized unpaired electrons and their neighboring nuclei, and that the size of these hyperfine couplings is crucial to the magnitude of the enhancements. Microwave power dependent studies show that the OE saturates at considerably lower power levels than the solid effect in the same samples. Our results provide new insights into the mechanism of the Overhauser effect, and also provide a new approach to perform DNP experiments in chemical, biophysical, and physical systems at high magnetic fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interface-induced magnetic polar metal phase in complex oxides

Abstract Polar metals are commonly defined as metals with polar structural distortions. Strict symmetry restrictions make them an extremely rare breed as the structural constraints favor insulating over metallic phase. Moreover, no polar metals are known to be magnetic. Here we report on the realization of a magnetic polar metal phase in a BaTiO 3 /SrRuO 3 /BaTiO 3 heterostructure. Electron microscopy reveals polar lattice distortions in three-unit-cells thick SrRuO 3 between BaTiO 3 layers. Electrical transport and magnetization measurements reveal that this heterostructure possesses a metallic phase with high conductivity and ferromagnetic ordering with high saturation moment. The high conductivity in the SrRuO 3 layer can be attributed to the effect of electrostatic carrier accumulation induced by the BaTiO 3 layers. Density-functional-theory calculations provide insights into the origin of the observed properties of the thin SrRuO 3 film. The present results pave a way to design materials with desired functionalities at oxide interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Picosecond volume expansion drives a later-time insulator–metal transition in a nano-textured Mott insulator

There is significant technological interest in developing ever faster switching between different electronic and magnetic states of matter. Manipulating properties at terahertz rates requires accessing the intrinsic timescales of both electrons and associated phonons, which is possible with short-pulse photoexcitation. However, in many Mott insulators, the electronic transition is accompanied by the nucleation and growth of percolating domains of the changed lattice structure, leading to empirical timescales dominated by slowly coarsening dynamics. Here, in this study, we use time-resolved X-ray diffraction and reflectivity measurements to show that the photoinduced insulator-to-metal transition in an epitaxially strained Mott insulating thin film occurs without observable domain formation and coarsening effects, allowing the study of the intrinsic electronic and lattice dynamics. Above a fluence threshold, the initial electronic excitation drives a fast lattice rearrangement, which is followed by a slower electronic evolution into a metastable nonequilibrium state. Microscopic model calculations based on time-dependent dynamical mean-field theory and semiclassical lattice dynamics explain the threshold behaviour and elucidate the delayed onset of the electronic phase transition. This work highlights the importance of combined electronic and structural studies in unravelling the physics of dynamic transitions and the timescales of photoinduced processes. During a photoinduced phase transition, electronic rearrangements are usually faster than lattice ones. Time-resolved measurements now show that the insulator-to-metal transition in a thin-film Mott insulator is preceded by lattice reconfiguration.

36 MATERIALS SCIENCE↗

The Quantum Spin Hall Effect: Theory and Experiment

The search for topologically non-trivial states of matter has become an important goal for condensed matter physics. Recently, a new class of topological insulators has been proposed. These topological insulators have an insulating gap in the bulk, but have topologically protected edge states due to the time reversal symmetry. In two dimensions the helical edge states give rise to the quantum spin Hall (QSH) effect, in the absence of any external magnetic field. Here we review a recent theory which predicts that the QSH state can be realized in HgTe/CdTe semiconductor quantum wells. By varying the thickness of the quantum well, the band structure changes from a normal to an 'inverted' type at a critical thickness d{sub c}. We present an analytical solution of the helical edge states and explicitly demonstrate their topological stability. We also review the recent experimental observation of the QSH state in HgTe/(Hg,Cd)Te quantum wells. We review both the fabrication of the sample and the experimental setup. For thin quantum wells with well width d{sub QW} < 6.3 nm, the insulating regime shows the conventional behavior of vanishingly small conductance at low temperature. However, for thicker quantum wells (d{sub QW} > 6.3 nm), the nominally insulating regime shows a plateau of residual conductance close to 2e{sup 2}/h. The residual conductance is independent of the sample width, indicating that it is caused by edge states. Furthermore, the residual conductance is destroyed by a small external magnetic field. The quantum phase transition at the critical thickness, d{sub c} = 6.3 nm, is also independently determined from the occurrence of a magnetic field induced insulator to metal transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic Field Penetration Technique to Study High Field Shielding of Multilayered Superconductors

The SIS structure which consists of alternative thin layers of superconductors and insulators on a bulk niobium has been proposed to shield niobium cavity surface from high magnetic field and hence increase the accelerating gradient. The study of the behavior of multilayer super-conductors in an external magnetic field is essential to optimize their SRF performance. In this work we report the development of a simple and efficient technique to measure penetration of magnetic field into bulk, thin film and multilayer superconductors. Experimental setup contains a small superconducting solenoid which can produce a parallel surface magnetic field up to 0.5 T and Hall probes to detect penetrated magnetic field across the superconducting sample. This system was calibrated and used to study the effect of niobium sample thickness on the field of full magnetic flux penetration. We determined the optimum thickness of the niobium substrate to fabricate the multilayer structure for the measurements in our setup. This technique was used to measure penetration fields of Nb₃Sn thin films and Nb₃Sn/Al₂O₃ multi-layers deposited on Al₂O₃ wafers.

Senevirathne, I. H.↗