Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Likelihood”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Search for neutrinos from gamma-ray bursts with ANTARES

ANTARES is the largest high-energy neutrino telescope in the Northern Hemisphere. A search for neutrinos in coincidence with gamma-ray bursts using ANTARES data from late 2007 to 2011 is presented here. An extended maximum likelihood ratio search was employed to optimise the discovery potential for a neutrino signal as predicted by a second-generation numerical model. No significant excess was found, so 90% confidence upper limits on the fluences as expected from analytically approximated neutrino-emission models as well as on up-to-date numerical predictions were placed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evaluating Kuala Lumpur stock exchange oriented bank performance with stochastic frontiers

Banks play an essential role in the economic development and banks need to be efficient; otherwise, they may create blockage in the process of development in any country. The efficiency of banks in Malaysia is important and should receive greater attention. This study formulated an appropriate stochastic frontier model to investigate the efficiency of banks which are traded on Kuala Lumpur Stock Exchange (KLSE) market during the period 2005–2009. All data were analyzed to obtain the maximum likelihood method to estimate the parameters of stochastic production. Unlike the earlier studies which use balance sheet and income statements data, this study used market data as the input and output variables. It was observed that banks listed in KLSE exhibited a commendable overall efficiency level of 96.2% during 2005–2009 hence suggesting minimal input waste of 3.8%. Among the banks, the COMS (Cimb Group Holdings) bank is found to be highly efficient with a score of 0.9715 and BIMB (Bimb Holdings) bank is noted to have the lowest efficiency with a score of 0.9582. The results also show that Cobb-Douglas stochastic frontier model with truncated normal distributional assumption is preferable than Translog stochastic frontier model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral restoration in high resolution electron energy loss spectroscopy based on iterative semi-blind Lucy-Richardson algorithm applied to rutile surfaces

A new spectral restoration algorithm of reflection electron energy loss spectra is proposed. It is based on the maximum likelihood principle as implemented in the iterative Lucy-Richardson approach. Resolution is enhanced and point spread function recovered in a semi-blind way by forcing cyclically the zero loss to converge towards a Dirac peak. Synthetic phonon spectra of TiO{sub 2} are used as a test bed to discuss resolution enhancement, convergence benefit, stability towards noise, and apparatus function recovery. Attention is focused on the interplay between spectral restoration and quasi-elastic broadening due to free carriers. A resolution enhancement by a factor up to 6 on the elastic peak width can be obtained on experimental spectra of TiO{sub 2}(110) and helps revealing mixed phonon/plasmon excitations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Stochastic generation of hourly rainstorm events in Johor

Engineers and researchers in water-related studies are often faced with the problem of having insufficient and long rainfall record. Practical and effective methods must be developed to generate unavailable data from limited available data. Therefore, this paper presents a Monte-Carlo based stochastic hourly rainfall generation model to complement the unavailable data. The Monte Carlo simulation used in this study is based on the best fit of storm characteristics. Hence, by using the Maximum Likelihood Estimation (MLE) and Anderson Darling goodness-of-fit test, lognormal appeared to be the best rainfall distribution. Therefore, the Monte Carlo simulation based on lognormal distribution was used in the study. The proposed model was verified by comparing the statistical moments of rainstorm characteristics from the combination of the observed rainstorm events under 10 years and simulated rainstorm events under 30 years of rainfall records with those under the entire 40 years of observed rainfall data based on the hourly rainfall data at the station J1 in Johor over the period of 1972–2011. The absolute percentage error of the duration-depth, duration-inter-event time and depth-inter-event time will be used as the accuracy test. The results showed the first four product-moments of the observed rainstorm characteristics were close with the simulated rainstorm characteristics. The proposed model can be used as a basis to derive rainfall intensity-duration frequency in Johor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The use of copulas to practical estimation of multivariate stochastic differential equation mixed effects models

A system of stochastic differential equations (SDE) with mixed-effects parameters and multivariate normal copula density function were used to develop tree height model for Scots pine trees in Lithuania. A two-step maximum likelihood parameter estimation method is used and computational guidelines are given. After fitting the conditional probability density functions to outside bark diameter at breast height, and total tree height, a bivariate normal copula distribution model was constructed. Predictions from the mixed-effects parameters SDE tree height model calculated during this research were compared to the regression tree height equations. The results are implemented in the symbolic computational language MAPLE.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of reconstruction errors and identification of artefacts for JET gamma and neutron tomography

The Joint European Torus (JET) neutron profile monitor ensures 2D coverage of the gamma and neutron emissive region that enables tomographic reconstruction. Due to the availability of only two projection angles and to the coarse sampling, tomographic inversion is a limited data set problem. Several techniques have been developed for tomographic reconstruction of the 2-D gamma and neutron emissivity on JET, but the problem of evaluating the errors associated with the reconstructed emissivity profile is still open. The reconstruction technique based on the maximum likelihood principle, that proved already to be a powerful tool for JET tomography, has been used to develop a method for the numerical evaluation of the statistical properties of the uncertainties in gamma and neutron emissivity reconstructions. The image covariance calculation takes into account the additional techniques introduced in the reconstruction process for tackling with the limited data set (projection resampling, smoothness regularization depending on magnetic field). The method has been validated by numerically simulations and applied to JET data. Different sources of artefacts that may significantly influence the quality of reconstructions and the accuracy of variance calculation have been identified.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Earthquake hazard analysis for the different regions in and around Ağrı

We investigated earthquake hazard parameters for Eastern part of Turkey by determining the a and b parameters in a Gutenberg–Richter magnitude–frequency relationship. For this purpose, study area is divided into seven different source zones based on their tectonic and seismotectonic regimes. The database used in this work was taken from different sources and catalogues such as TURKNET, International Seismological Centre (ISC), Incorporated Research Institutions for Seismology (IRIS) and The Scientific and Technological Research Council of Turkey (TUBITAK) for instrumental period. We calculated the a value, b value, which is the slope of the frequency–magnitude Gutenberg–Richter relationship, from the maximum likelihood method (ML). Also, we estimated the mean return periods, the most probable maximum magnitude in the time period of t-years and the probability for an earthquake occurrence for an earthquake magnitude ≥ M during a time span of t-years. We used Zmap software to calculate these parameters. The lowest b value was calculated in Region 1 covered Cobandede Fault Zone. We obtain the highest a value in Region 2 covered Kagizman Fault Zone. This conclusion is strongly supported from the probability value, which shows the largest value (87%) for an earthquake with magnitude greater than or equal to 6.0. The mean return period for such a magnitude is the lowest in this region (49-years). The most probable magnitude in the next 100 years was calculated and we determined the highest value around Cobandede Fault Zone. According to these parameters, Region 1 covered the Cobandede Fault Zone and is the most dangerous area around the Eastern part of Turkey.

58 GEOSCIENCES↗

Asteroid models from photometry and complementary data sources

I discuss inversion methods for asteroid shape and spin reconstruction with photometry (lightcurves) and complementary data sources such as adaptive optics or other images, occultation timings, interferometry, and range-Doppler radar data. These are essentially different sampling modes (generalized projections) of plane-of-sky images. An important concept in this approach is the optimal weighting of the various data modes. The maximum compatibility estimate, a multi-modal generalization of the maximum likelihood estimate, can be used for this purpose. I discuss the fundamental properties of lightcurve inversion by examining the two-dimensional case that, though not usable in our three-dimensional world, is simple to analyze, and it shares essentially the same uniqueness and stability properties as the 3-D case. After this, I review the main aspects of 3-D shape representations, lightcurve inversion, and the inclusion of complementary data.

79 ASTRONOMY AND ASTROPHYSICS↗

The upgrade of the Thomson scattering system for measurement on the C-2/C-2U devices

The C-2/C-2U Thomson scattering system has been substantially upgraded during the latter phase of C-2/C-2U program. A Rayleigh channel has been added to each of the three polychromators of the C-2/C-2U Thomson scattering system. Onsite spectral calibration has been applied to avoid the issue of different channel responses at different spots on the photomultiplier tube surface. With the added Rayleigh channel, the absolute intensity response of the system is calibrated with Rayleigh scattering in argon gas from 0.1 to 4 Torr, where the Rayleigh scattering signal is comparable to the Thomson scattering signal at electron densities from 1 × 10{sup 13} to 4 × 10{sup 14} cm{sup −3}. A new signal processing algorithm, using a maximum likelihood method and including detailed analysis of different noise contributions within the system, has been developed to obtain electron temperature and density profiles. The system setup, spectral and intensity calibration procedure and its outcome, data analysis, and the results of electron temperature/density profile measurements will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Estimating Arrhenius parameters using temperature programmed molecular dynamics

Kinetic rates at different temperatures and the associated Arrhenius parameters, whenever Arrhenius law is obeyed, are efficiently estimated by applying maximum likelihood analysis to waiting times collected using the temperature programmed molecular dynamics method. When transitions involving many activated pathways are available in the dataset, their rates may be calculated using the same collection of waiting times. Arrhenius behaviour is ascertained by comparing rates at the sampled temperatures with ones from the Arrhenius expression. Three prototype systems with corrugated energy landscapes, namely, solvated alanine dipeptide, diffusion at the metal-solvent interphase, and lithium diffusion in silicon, are studied to highlight various aspects of the method. The method becomes particularly appealing when the Arrhenius parameters can be used to find rates at low temperatures where transitions are rare. Systematic coarse-graining of states can further extend the time scales accessible to the method. Good estimates for the rate parameters are obtained with 500-1000 waiting times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods for analysing the quality of the element base of quantum information technologies

Methods for analysing the quality of the element base of quantum information technologies are considered. Methods for simulating quantum operations with allowance for quantum noise, based on the formalism of quantum operations (operator sum method and Choi – Jamiolkowski isomorphism), are described. Results of simulating some one- and two-qubit quantum transformations with allowance for the amplitude and phase relaxation and the presence of depolarising noise are reported. The quantum state tomography, based on the root approach and maximum likelihood method, is considered. The method of guaranteed estimation of quantum tomography accuracy, which implies quantitative estimation of measurement results, is described. Tomography of a single-qubit transformation on a superconducting quantum processor (IBM) is performed. The practical purpose of the study is to provide high quality and efficiency of quantum information technologies. The results obtained can be used to improve the quality of logic gates of quantum computers and debug the procedures of quantum state control in quantum cryptography problems. The bibliography includes 28 references. (quantum technology)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of control quality factor for HVAC control loop performance assessment I—Methodology (ASHRAE RP-1587)

This article is the second paper from the ASHRAE research project RP-1587, focusing on the methodology of obtaining a control quality factor (CQF). This article presents a development of two CQFs for assessing the heating, ventilation, and air-conditioning (HVAC) control loop performance. Both CQFs are able to detect whether the control loop is able to maintain the setpoint and identify the loop's ability to handle disturbances. In addition, the reversal behaviors are assessed as well. The first CQF (CQF-Harris) is proposed based on the normalized Harris index using the recursive least squares method. This recursive least squares method is selected because of its computational efficiency compared with the maximum likelihood estimation method. The second CQF (CQF-EWMA) is based on the exponentially weighted moving average of the error ratio. The assessment scale of excellent, good, fair, bad, and failed, which indicates the quality of the HVAC control loops, is established as well. The sensitivity analysis for both CQFs is also conducted, and it provides insights on choosing the appropriate parameters to compute such CQFs. Such parameters include the sampling frequency, the length of the moving window, and the variance of the unmeasured disturbance. The field evaluations and tests of the proposed CQFs for simulated control loops and real control loops can be found in the companion paper with the title 'Development of Control Quality Factor for HVAC Control Loop Performance Assessment - III: Field Testing and Results (ASHRAE RP-1587).'

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

THE CANADA-FRANCE HIGH-z QUASAR SURVEY: NINE NEW QUASARS AND THE LUMINOSITY FUNCTION AT REDSHIFT 6

We present discovery imaging and spectroscopy for nine new z {approx} 6 quasars found in the Canada-France High-z Quasar Survey (CFHQS) bringing the total number of CFHQS quasars to 19. By combining the CFHQS with the more luminous Sloan Digital Sky Survey sample, we are able to derive the quasar luminosity function from a sample of 40 quasars at redshifts 5.74 < z < 6.42. Our binned luminosity function shows a slightly lower normalization and flatter slope than found in previous work. The binned data also suggest a break in the luminosity function at M {sub 1450} {approx} -25. A double power-law maximum likelihood fit to the data is consistent with the binned results. The luminosity function is strongly constrained (1{sigma} uncertainty <0.1 dex) over the range -27.5 < M {sub 1450} < -24.7. The best-fit parameters are {phi}(M*{sub 1450}) = 1.14 x 10{sup -8} Mpc{sup -3} mag{sup -1}, break magnitude M*{sub 1450} = -25.13, and bright end slope {beta} = -2.81. However, the covariance between {beta} and M*{sub 1450} prevents strong constraints being placed on either parameter. For a break magnitude in the range -26 < M*{sub 1450} < -24, we find -3.8 < {beta} < -2.3 at 95% confidence. We calculate the z = 6 quasar intergalactic ionizing flux and show it is between 20 and 100 times lower than that necessary for reionization. Finally, we use the luminosity function to predict how many higher redshift quasars may be discovered in future near-IR imaging surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

TURNING THE TIDES ON THE ULTRA-FAINT DWARF SPHEROIDAL GALAXIES: COMA BERENICES AND URSA MAJOR II

We present deep CFHT/MegaCam photometry of the ultra-faint Milky Way satellite galaxies: Coma Berenices (ComBer) and Ursa Major II (UMa II). These data extend to r {approx} 25, corresponding to 3 mag below the main-sequence turn-offs in these galaxies. We robustly calculate a total luminosity of M{sub V} = -3.8 {+-} 0.6 for ComBer and M{sub V} = -3.9 {+-} 0.5 for UMa II, in agreement with previous results and confirming that these galaxies are among the faintest of the known dwarf satellites of the Milky Way. ComBer shows a fairly regular morphology with no signs of active tidal stripping down to a surface brightness limit of 32.4 mag arcsec{sup -2}. Using a maximum likelihood analysis, we calculate the half-light radius of ComBer to be r{sub half} = 74 {+-} 4 pc (5.8 {+-} 0.'3) and its ellipticity {epsilon} = 0.36 {+-} 0.04. In contrast, UMa II shows signs of ongoing disruption. We map its morphology down to {mu}{sub V} = 32.6 mag arcsec{sup -2} and found that UMa II is larger than previously determined, extending at least {approx}600 pc (1.{sup 0}1 on the sky) and it is also quite elongated with an overall ellipticity of {epsilon} = 0.50 {+-} 0.2. However, our estimate for the half-light radius, 123 {+-} 3 pc (14.1 {+-} 0.'3) is similar to previous results. We discuss the implications of these findings in the context of potential indirect dark matter detections and galaxy formation. We conclude that while ComBer appears to be a stable dwarf galaxy, UMa II shows signs of ongoing tidal interaction.

79 ASTRONOMY AND ASTROPHYSICS↗

LOW-MASS VISUAL COMPANIONS TO NEARBY G-DWARFS

A complete census of wide visual companions to nearby G-dwarf stars can be achieved by selecting candidates from the Two Micron All Sky Survey (2MASS) Point-Source Catalog and checking their status by second-epoch imaging. Such data are obtained for 124 candidates with separations up to 20'', 47 of which are shown to be new physical low-mass stellar companions. A list of visual binaries with G-dwarf primaries is produced by combining newly found companions with historical data. Maximum likelihood analysis leads to a companion frequency of 0.13 {+-} 0.015 per decade of separation. The mass ratio is distributed almost uniformly, with a power-law index between -0.4 and 0. The remaining uncertainty in the index is related to modeling of the companion detection threshold in 2MASS. These findings are confirmed by an alternative analysis of wider companions in 2MASS, removing the contamination by background stars statistically. Extension of this work will lead to a complete detection of visual companions-a necessary step toward reaching unbiased multiplicity statistics over the full range of orbital periods and, eventually, understanding the origin of multiple systems.

79 ASTRONOMY AND ASTROPHYSICS↗

SEGUE 3: AN OLD, EXTREMELY LOW LUMINOSITY STAR CLUSTER IN THE MILKY WAY's HALO

We investigate the kinematic and photometric properties of the Segue 3 Milky Way companion using Keck/DEIMOS spectroscopy and Magellan/IMACS g- and r-band imaging. Using maximum likelihood methods to analyze the photometry, we study the structure and stellar population of Segue 3. We find that the half-light radius of Segue 3 is 26'' {+-} 5'' (2.1 {+-} 0.4 pc, for a distance of 17 kpc) and the absolute magnitude is a mere M{sub V} = 0.0 {+-} 0.8 mag, making Segue 3 the least luminous old stellar system known. We find Segue 3 to be consistent with a single stellar population, with an age of 12.0{sup +1.5}{sub -0.4} Gyr and an [Fe/H] of -1.7{sup +0.07}{sub -0.27}. Line-of-sight velocities from the spectra are combined with the photometry to determine a sample of 32 stars which are likely associated with Segue 3. The member stars within three half-light radii have a velocity dispersion of 1.2 {+-} 2.6 km s{sup -1}. Photometry of the members indicates that the stellar population has a spread in [Fe/H] of {approx}< 0.3 dex. These facts, together with the small physical size of Segue 3, imply the object is likely an old, faint stellar cluster which contains no significant dark matter. We find tentative evidence for stellar mass loss in Segue 3 through the 11 candidate member stars outside of three half-light radii, as expected from dynamical arguments. Interpretation of the data outside of three half-light radii is complicated by the object's spatial coincidence with a previously known halo substructure, which may enhance contamination of our member sample.

79 ASTRONOMY AND ASTROPHYSICS↗

NGC 6811: AN INTERMEDIATE-AGE CLUSTER IN THE KEPLER FIELD

NGC 6811 is one of the four open clusters located in the Kepler spacecraft field of view. We obtained UBVRI photometry of the cluster on six nights (four of them photometric) with the 1.08 m Hall and 1.83 m Perkins telescopes at Lowell Observatory. The mean photometric precision ranges from better than 0.01 mag in the V, B - V, V - R, and V - I indices among stars brighter than magnitude 15 to about 0.05 mag for U - B at magnitude 18. We followed a Bayesian statistical approach using the Markov Chain Monte Carlo algorithm to determine the cluster reddening, distance, age, and iron content from a maximum-likelihood fit to stellar isochrones. Using the Yale-Yonsei isochrones, we derived E(B - V) 0.066 {+-} 0.025, (m - M){sub V} = 10.13 {+-} 0.19, age = 1.06 {+-} 0.19 Gyr, and Z = 0.012 {+-} 0.004 ([Fe/H] = -0.18); with the Padova isochrones, we found E(B - V) = 0.081 {+-} 0.015, (m - M){sub V} = 10.31 {+-} 0.11, age = 0.94 {+-} 0.08 Gyr, and Z = 0.012 {+-} 0.002 ([Fe/H] = -0.20). The uncertainties include possible errors in the photometric zero points of {+-}0.01 mag, but do not include uncertainties in the models. Taking into account the differences between the two sets of models, we find the best estimate for the cluster parameters to be E(B - V) = 0.074 {+-} 0.024, (m - M){sub V} = 10.22 {+-} 0.18, age = 1.00 {+-} 0.17 Gyr, and Z = 0.012 {+-} 0.004 ([Fe/H] = -0.19).

79 ASTRONOMY AND ASTROPHYSICS↗

CORRELATIONS BETWEEN SDSS TYPE Ia SUPERNOVA RATES AND HOST GALAXY PROPERTIES

Studying the correlation of Type Ia supernova rates (SNRs) with host galaxy properties is an important step in understanding the exact nature of Type Ia supernovae (SNe Ia). We use SNe Ia from the SDSS-II sample, spectroscopically determined masses and star formation rates, and a new maximum likelihood method, to fit the Scannapieco and Bildsten rate model SNR = A Multiplication-Sign M + B Multiplication-Sign SFR, where M is galaxy mass and SFR is star formation rate. We find A = 3.5{sup +0.9}{sub -0.7} Multiplication-Sign 10{sup -14} (SNe/yr)(M{sub Sun }){sup -1} and B = 1.3{sup +0.4}{sub -0.3} Multiplication-Sign 10{sup -3} (SNe/yr)(M{sub Sun} yr{sup -1}){sup -1}, assuming overall efficiency of 0.5. This is in reasonable agreement with other determinations. However we find strong evidence that this model is a poor fit to other projections of the data: it fails to correctly predict the distribution of supernovae with host mass or SFR. An additional model parameter is required; most likely this parameter is related to host galaxy mass. Some implications of this result are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗